Boemer, D., Carretta, Y., Laugier, M., Legrand, N., Papeleux, L., Boman, R., & Ponthot, J.-P. (2021). An advanced model of lubricated cold rolling with its comprehensive pilot mill validation. Journal of Materials Processing Technology, 296.
Peer reviewed (verified by ORBi)
Fallon Gaudichon, V., Boman, R., Chatar, N., Maclaren, J., & Fischer, V. (2021, September 07). Uncovering the biomechanical disparity of Cretaceous marine reptile feeding via finite element analysis. Paper presented at 69th Symposium on Vertebrate Palaeontology and Comparative Anatomy, Oxford, United Kingdom.
Peer reviewed
Bobach, B.-J., Falla, R., Boman, R., Terrapon, V., & Ponthot, J.-P. (2021). Phase change driven adaptive mesh refinement in PFEM. https://popups.uliege.be/esaform21/index.php?id=3861.
Peer reviewed
Garcia-Garino, C., Careglio, C., Pacini, E., Mirasso, A., Celentano, D., Papeleux, L., & Ponthot, J.-P. (2021). Simulacion Numerica Del Ensayo De Traccion Simple Para Probetas Delgadas. Analisis Del Caso Limite 3D. XXIII Workshop de Investigadores en Ciencias de la Computación.
Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2021). Element activation method and non-conformal dynamic remeshing strategy to model additive manufacturing. https://popups.uliege.be/esaform21/index.php?id=2320.
Peer reviewed
Rajaneesh, A., Ponthot, J.-P., & Bruyneel, M. (2021). High velocity impact response of composite laminates using modified meso-scale damage. International Journal of Impact Engineering, 147, 103701.
Peer reviewed (verified by ORBi)
Liegeois, K., Boman, R., Phipps, E. T., Wiesner, T. A., & Arnst, M. (2020). GMRES with embedded ensemble propagation for the efficient solution of parametric linear systems in uncertainty quantification of computational models. Computer Methods in Applied Mechanics and Engineering, 369.
Peer reviewed (verified by ORBi)
Crovato, A., Almeida, H., Vio, G., Silva, G., Prado, A., Breviglieri, C., Güner, H., Cabral, P., Boman, R., Terrapon, V., & Dimitriadis, G. (2020). Effect of Levels of Fidelity on Steady Aerodynamic and Static Aeroelastic Computations. Aerospace, II.
Peer reviewed (verified by ORBi)
Alvarez, P., Muniz, F., Celentano, D., Artigas, A., Castro cerda, F., Ponthot, J.-P., & Monsalve, A. (2020). Modeling the mechanical response of a Dual-Phase steel based on individual-phase tensile properties. Metals, 10(1031).
Peer reviewed (verified by ORBi)
Pacheco, M., Garcia-Herrera, C., Celentano, D., & Ponthot, J.-P. (2020). Mechanical Characterization of the Elastoplastic Response of a C11000-H2 Copper Sheet. Materials, 13, 5193.
Peer reviewed
Pacyna, L., Bertret, A., Derclaye, A., Papeleux, L., & Ponthot, J.-P. (2020). IMPLEMENTATION OF A RIG TEST FOR ROTOR/STATOR INTERACTION OF LOWPRESSURE COMPRESSOR BLADES AND COMPARISON OF EXPERIMENTAL RESULTS WITH NUMERICAL MODEL. Proceedings of ASME Turbo Expo 2020 (pp. 2020-14266).
Peer reviewed
Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (2020). Advanced material models for damage and failure analysis of fiber reinforced composite structures. NAFEMS France Conference.
Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2019, September). Addition of a finite element activation method in an existing thermomechanical finite element code to model additive manufacturing. Paper presented at Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), Pavia, Italy.
Mertens, P., Boman, R., Dickheuer, S., Krasikov, Y., Krimmer, A., Leichtle, D., Liegeois, K., Linsmeier, C., Litnovsky, A., Marchuk, O., Rasinski, M., & De Bock, M. (2019). On the use of rhodium mirrors for optical diagnostics in ITER. Fusion Engineering and Design, 146(part B), 2514-2518.
Peer reviewed (verified by ORBi)
Liegeois, K., Boman, R., Phipps, E., Mertens, P., Krasikov, Y., & Arnst, M. (2019, June 25). Ensemble propagation for efficient uncertainty quantification: Application to the thermomechanical modeling of a first mirror for the ITER core CXRS diagnostics. Paper presented at UNCECOMP 2019 / 3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering.
Boemer, D., Carretta, Y., Boman, R., Papeleux, L., Legrand, N., Laugier, M., & Ponthot, J.-P. (2019, June 03). Coupling procedure of a cold rolling lubrication model with finite element asperity flattening. Paper presented at 8th International Conference on Coupled Problems in Science and Engineering, Sitges, Spain.
Peer reviewed
Bruyneel, M., Rajaneesh, A., Ponthot, J.-P., & Flores, P. (2019, June). Advances in material modeling for high velocity impacts on composites. Paper presented at NAFEMS World Congress, Québec City, Canada.
Peer reviewed
Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (2019, June). On the predictability of composite structures vulnerability against high velocity impacts. Paper presented at ASIDIC 2019: Aerospace Structural Impact Dynamics International Conference, Madrid, Spain.
Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2019, May 27). Element activation strategy for Additive Manufacturing, based on the element deletion algorithm. Poster session presented at 4th Workshop on Metal Additive Manufacturing, KU Leuven, Leuven, Belgium.
Liegeois, K., Boman, R., Phipps, E., & Arnst, M. (2019, April 25). Efficient parametric computations using ensemble propagation for high dimensional finite element models. Paper presented at CÉCI Scientific Meeting.
Liegeois, K., Boman, R., Phipps, E., & Arnst, M. (2019, February 28). Ensemble Propagation for Efficient Uncertainty Quantification of Mechanical Contact Problems. Paper presented at SIAM Conference on Computational Science and Engineering.
Boemer, D., Carretta, Y., Boman, R., Ponthot, J.-P., & Papeleux, L. (2019, February 13). Advances in cold rolling modeling at ULiège. Paper presented at Modélisation numérique du laminage à froid lubrifié en lubrification flexible, Maizières-lès-Metz, France.
Cerquaglia, M. L., Thomas, D., Boman, R., Terrapon, V., & Ponthot, J.-P. (2019). A fully partitioned Lagrangian framework for FSI problems characterized by free surfaces, large solid deformations and displacements, and strong added-mass effects. Computer Methods in Applied Mechanics and Engineering, 348, 409-442.
Peer reviewed (verified by ORBi)
Crovato, A., Boman, R., Güner, H., Dimitriadis, G., Terrapon, V., Almeida, H., Prado, A., Breviglieri, C., Cabral, P., & Silva, G. (2019). A Full Potential Static Aeroelastic Solver for Preliminary Aircraft Design. Proceedings of the 18th International Forum on Aeroelasticity and Structural Dynamics (IFASD2019).
Thomas, D., Cerquaglia, M. L., Boman, R., Economon, T., Alonso, J., Dimitriadis, G., & Terrapon, V. (2019). CUPyDO - An integrated Python environment for coupled fluid-structure simulations. Advances in Engineering Software.
Peer reviewed (verified by ORBi)
Bruchon, J., Bergheau, J.-M., & Boman, R. (Eds.). (2018). Computational methods in welding and additive manufacturing. Comptes Rendus Mécanique, 346(11), 997-1122.
Peer reviewed (verified by ORBi)
Thomas, D., Cerquaglia, M. L., Boman, R., Dimitriadis, G., & Terrapon, V. (2018, September 13). Demonstration of a unified and flexible coupling environment for nonlinear fluid-structure interaction. Paper presented at Collaborative Conference on Physics Series, CCPS 2018, Barcelona, Spain.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2018, August 29). Effective development of a finite-element solver at the University. Paper presented at ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Tarbes, France.
Arnst, M., Ponthot, J.-P., & Boman, R. (2018). Comparison of stochastic and interval methods for uncertainty quantification of metal forming processes. Comptes Rendus Mécanique, 346(8), 634-646.
Peer reviewed (verified by ORBi)
Boutenel, F., Delhomme, M., Velay, V., & Boman, R. (2018). Finite element modelling of cold drawing for high-precision tubes. Comptes Rendus Mécanique, 346(8), 665-677.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., Drapier, S., & Feulvarch, E. (Crit. Eds.). (2018). Computational modeling of material forming processes. Comptes Rendus de l'Académie des Sciences. Série 2b, Mécanique, 346(8), 615.
Peer reviewed
Flores, P., Rajaneesh, A., Bruyneel, M., & Ponthot, J.-P. (2018, June). Finite element implementation of a strain rate sensitive model for impact simulation on composites. Paper presented at 6th European Conference on Computational Mechanics (ECCM6), Glasgow, UK.
Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2018, May 28). Finite Element activation strategy in the numerical simulation of Additive Manufacturing Processes. Poster session presented at 3rd Workshop on Metal Additive Manufacturing, Liège, Liège, Belgium.
Liegeois, K., Boman, R., Phipps, E., Wiesner, T., & Arnst, M. (2018, April 17). On the Ensemble Propagation for Efficient Uncertainty Quantification of Mechanical Contact Problems. Paper presented at SIAM Conference on Uncertainty Quanti cation 2018.
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2018). Continuous roll forming including in-line welding and post-cut within an ALE formalism. Finite Elements in Analysis and Design, 143, 11-31.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2018). Thermomechanical simulations of blanking process operated over a wide range of punch velocities. Journal of Physics. Conference Series, 1063, 012014.
Peer reviewed (verified by ORBi)
Carretta, Y., Hunter, A., Boman, R., Ponthot, J.-P., Legrand, N., Laugier, M., & Dwyer-Joyce, R. (2018). Ultrasonic roll bite measurements in cold rolling: Contact length and strip thickness. Proceedings of the Institution of Mechanical Engineers. Part J, Journal of Engineering Tribology, 232(2), 179-192.
Peer reviewed (verified by ORBi)
Donéa, J., Huerta, A., Ponthot, J.-P., & Rodriguez-Ferran, A. (2018). Arbitrary Lagrangian–Eulerian Methods. In E., Stein, R., de Borst, & T. J. R., Hughes (Eds.), Encyclopedia of Computational Mechanics Second Edition (Second edition). Wiley.
Peer reviewed
Arnst, M., Abello Álvarez, B., Ponthot, J.-P., & Boman, R. (2017). Itô-SDE MCMC method for Bayesian characterization of errors associated with data limitations in stochastic expansion methods for uncertainty quantification. Journal of Computational Physics, 349, 59-79.
Peer reviewed (verified by ORBi)
Carretta, Y., Hunter, A., Boman, R., Ponthot, J.-P., Legrand, N., Laugier, M., & Dwyer-Joyce, R. (2017). Ultrasonic roll bite measurements in cold rolling - roll stress and deformation. Journal of Materials Processing Technology, 249, 1-13.
Peer reviewed (verified by ORBi)
Liegeois, K., Boman, R., Mertens, P., Panin, A., Phipps, E., & Arnst, M. (2017, July 19). Ensemble propagation for efficient uncertainty quantification on emerging architectures: Application to thermomechanical contact. Poster session presented at Quantification of Uncertainty: Improving Efficiency and Technology, Trieste, Italy.
Wautelet, G., Boman, R., & Ponthot, J.-P. (2017, July 05). On some Improvements of the Augmented Lagrangian Treatment for Solving Frictional Contact Problems. Paper presented at 5th International Conference on Computational Contact Mechanics, Lecce, Italie.
Cerquaglia, M. L., Boman, R., Deliège, G., Papeleux, L., & Ponthot, J.-P. (2017, June 14). PFEM-FEM coupling for fluid-structure interaction problems involving free surfaces and large solid deformations. Paper presented at VII International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2017).
Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (2017, June). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES. Paper presented at 14th International Conference on Fracture - ICF14, Rhodes, Greece.
Carretta, Y., Bech, J., Legrand, N., Laugier, M., Ponthot, J.-P., & Boman, R. (2017). Numerical modelling of micro-plasto-hydrodynamic lubrication in plane strip drawing. Tribology International, 110, 378-391.
Peer reviewed (verified by ORBi)
Thomas, D., Variyar, A., Boman, R., Economon, T. D., Alonso, J. J., Dimitriadis, G., & Terrapon, V. (2017). Staggered strong coupling between existing fluid and solid solvers through a Python interface for fluid-structure interaction problems. Proceedings of the VII International Conference on Coupled Problems in Science and Engineering.
Peer reviewed
Carretta, Y., Bech, J., Legrand, N., Laugier, M., Boman, R., & Ponthot, J.-P. (2017). Numerical modelling of microscopic lubricant flow in sheet metal forming. Application to plane strip drawing. International Journal for Numerical Methods in Engineering, 112, 203-237.
Peer reviewed (verified by ORBi)
Ponthot, J.-P. (2017, January). Belgian National Committee for Theoretical and Applied Mechanics. ECCOMAS Newsletter, p. 36.
Agelet de Saracibar, C., Boman, R., Bussetta, P., Cajas, J. C., Cervera, M., Chiumenti, M., Coll, A., Dadvand, P., Hernández Ortega, J., Houzeaux, G., Pasenau de Riera, M. Á., & Ponthot, J.-P. (2017). Numerical Methods. In G., Schmitz & U., Prahl (Eds.), Handbook of Software Solutions for ICME (pp. 487-531). Springer.
Boemer, D., & Ponthot, J.-P. (2017). A generic wear prediction procedure based on the Discrete Element Method for ball mill liners in the cement industry. Minerals Engineering, 109, 55-79.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., Bussetta, P., & Ponthot, J.-P. (2017). On the numerical simulation of sheet metal blanking process. International Journal of Material Forming, 10, 55-71.
Peer reviewed (verified by ORBi)
Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., & Ponthot, J.-P. (2017). The particle finite element method for the numerical simulation of bird strike. International Journal of Impact Engineering.
Peer reviewed (verified by ORBi)
Cerquaglia, M. L., Deliège, G., Boman, R., & Ponthot, J.-P. (2017). Preliminary assessment of the possibilities of the Particle Finite Element Method in the numerical simulation of bird impact on aeronautical structures. Procedia Engineering, 173, 101-108.
Peer reviewed (verified by ORBi)
Laurent, C., Verwaerde, J., Böhme, B., Ponthot, J.-P., & Balligand, M. (2017). Effect of orthopedic implants on long bone properties : a combined experimental and numerical approach. Computer Methods in Biomechanics and Biomedical Engineering.
Ponthot, J.-P., Feulvarch, E., Drapier, S., & Bergheau, J.-M. (Eds.). (2017). Computational methods in manufacturing. International Journal of Material Forming, 10, 1-2.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2016). Application of Uncoupled Damage Models to Predict Ductile Fracture in Sheet Metal Blanking. Key Engineering Materials, 725, 483-488.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2016, December). Application of uncoupled damage models to predict ductile fracture in sheet metal blanking. Paper presented at 13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications - AEPA2016, Hiroshima, Japon.
Boemer, D., & Ponthot, J.-P. (2016). DEM modeling of ball mills with experimental validation: influence of contact parameters on charge motion and power draw. Computational Particle Mechanics, 4(1), 53-67.
Peer reviewed
Boman, R. (2016). Développer du code avec une équipe de "non-geeks" à l'ULg. Paper presented at Geeks Anonymes, Liège, Belgium.
Cerquaglia, M. L., Deliège, G., Boman, R., & Ponthot, J.-P. (2016, June 09). Two novel ways to impose free-slip boundary conditions in fluid-structure interaction problems using the Particle Finite Element Method. Paper presented at ECCOMAS 2016.
Böhme, B., d'Otreppe, V., Ponthot, J.-P., & Balligand, M. (2016). Intraosseous stress distribution and bone interaction during load application across the canine elbow joint: A preliminary finite element analysis for determination of condylar fracture pathogenesis in immature and mature dogs. Research in Veterinary Science, 106, 146-148.
Peer reviewed (verified by ORBi)
Wautelet, G., Papeleux, L., & Ponthot, J.-P. (2016, May 20). Efficient and Robust Automatic Augmented Lagrangian Algorithm for Solving Frictional Contact Problems - Application to Wire Drawing Process. Paper presented at 2nd International conference on COmputational methods in Manufacturing Processes, Liège, Belgium.
Arnst, M., Liegeois, K., Boman, R., & Ponthot, J.-P. (2016, May 18). Comparison of interval and stochastic methods for uncertainty quantification in metal forming. Paper presented at ICOMP International Conference on COmputational methods in Manufacturing Processes.
Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2016, May). Thermomechanical simulation of blanking operated at high punch velocities. Paper presented at 2nd International conference on COmputational methods in Manufacturing Processes - ICOMP’2016, Liège, Belgium.
Flipon, B., Lawrjaniec, D., Papeleux, L., Ponthot, J.-P., & Habraken, A. (2016). Numerical Simulations of a Two Roll Round Bar Straightener. AIP Conference Proceedings 1769, 120001 (2016) (pp. 6).
Peer reviewed
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2016). Lagrangian and arbitrary Lagrangian Eulerian simulations of complex roll-forming processes. Comptes Rendus Mécanique, 344(4-5), 251-266.
Peer reviewed (verified by ORBi)
Mengoni, M., Ponthot, J.-P., & Boman, R. (2016). Mesh Management Methods in Finite Element Simulations of Orthodontic Tooth Movement. Medical Engineering and Physics, 38(2), 140-147.
Peer reviewed (verified by ORBi)
Careglio, C., Canales Cardenas, C., García Garino, C., Mirasso, A., & Ponthot, J.-P. (2016, January). A numerical study of hypoelastic and hyperelastic large strain viscoplastic Perzyna type models. Acta Mechanica.
Peer reviewed (verified by ORBi)
Bergheau, J.-M., Drapier, S., Feulvarch, E., & Ponthot, J.-P. (Eds.). (2016). Computational simulation of manufacturing processes. Comptes Rendus Mécanique, 344, 209-210.
Peer reviewed (verified by ORBi)
Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134.
Peer reviewed (verified by ORBi)
Bussetta, P., Dialami, N., Chiumenti, M., Cervera, M., Agelet de Saracibar, C., & Ponthot, J.-P. (2016). 3D numerical models of FSW processes with noncylindrical pin. Advances in Materials and Processing Technologies, 1(3-4), 275-287.
Peer reviewed (verified by ORBi)
Bussetta, P., Feulvarch, E., Tongne, A., Boman, R., Bergheau, J.-M., & Ponthot, J.-P. (2016). Two 3D thermomechanical numerical models of friction stir welding processes with a trigonal pin. Numerical Heat Transfer. Part A, Applications, 70(9), 995-1008.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., & Ponthot, J.-P. (2016). Numerical prediction of ductile failure in the blanking process by means of uncoupled and coupled phenomenological damage models. MATEC Web of Conferences.
Peer reviewed (verified by ORBi)
Cerquaglia, M. L., Deliège, G., Boman, R., Terrapon, V., & Ponthot, J.-P. (2016). Free-slip boundary conditions for simulating free-surface incompressible flows through the Particle Finite Element Method. International Journal for Numerical Methods in Engineering.
Peer reviewed (verified by ORBi)
Laurent, C., Böhme, B., Mengoni, M., d'Otreppe, V., Balligand, M., & Ponthot, J.-P. (2016). Prediction of the mechanical response of canine humerus to three-point bending using subject-specific finite element modelling. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 230, 639-649.
Peer reviewed (verified by ORBi)
Nguyen, D.-T., Rauchs, G., & Ponthot, J.-P. (2016). A quadratic contact element passing the patch test. Key Engineering Materials, 681, 47-85.
Peer reviewed (verified by ORBi)
Wautelet, G., Papeleux, L., & Ponthot, J.-P. (2016). The Influence of Equivalent Contact Area Computation in 3D Extended Node to Surface Contact Elements. Key Engineering Materials, 681, 19-46.
Peer reviewed (verified by ORBi)
Bussetta, P., Dialami, Chiumenti, M., Agelet de Saracibar, C., Cervera, M., Boman, R., & Ponthot, J.-P. (2015). 3D numerical models using a fluid or a solid formulation of FSW processes with non-cylindrical pin. Advanced Modeling and Simulation in Engineering Sciences, 2(27).
Peer reviewed (verified by ORBi)
Chiu, L. N. S., Falzon, B. G., Boman, R., Chen, B., & Yan, W. (2015). Finite element modelling of composite structures under crushing load. Composite Structures, 131, 215–228.
Peer reviewed (verified by ORBi)
Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (2015, September 28). On some drawbacks and possible improvements of a Lagrangian Finite Element method for simulating incompressible flows. Paper presented at Particles 2015.
Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (2015, September 08). On some drawbacks and possible improvements of a Particle Finite Element Method for simulating incompressible flows. Paper presented at 8th International Workshop on Meshfree Methods.
Mengoni, M., & Ponthot, J.-P. (2015). An enhanced version of a bone remodelling model based on the continuum damage mechanics theory. Computer Methods in Biomechanics and Biomedical Engineering, 18(12), 1367-1376.
Peer reviewed (verified by ORBi)
Canales Cardenas, C., Boman, R., Bussetta, Habraken, A., & Ponthot, J.-P. (2015, July). Comparison of fracture prediction models on sheet metal blanking simulations. Paper presented at 4th International Conference on Computational Modeling of Fracture and Failure - CFRAC 2015, Cachan, France.
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2015, July). Lagrangian and Arbitrary Lagrangian Eulerian Simulations of Complex Roll Forming Processes. Paper presented at 9th European Solid Mechanics Conference (ESMC 2015), Madrid, Spain.
Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (2015). A Low-Cost Digital Image Correlation Technique for Characterising the Shear Deformation of Fabrics for Draping Studies. Strain, 51(3), 180-189.
Peer reviewed (verified by ORBi)
Arnst, M., Abello Álvarez, B., Boman, R., & Ponthot, J.-P. (2015, May 26). Parametric uncertainty quantification in the presence of modeling errors: Bayesian approach and application to metal. Paper presented at UNCECOMP International Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crète, Grèce.
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2015). Simulations lagrangienne et arbitraire lagrangienne eulérienne du procédé de profilage. Actes du 12e Colloque National en Calcul des Structures.
Canales Cardenas, C., Boman, R., Bussetta, P., & Ponthot, J.-P. (2015, April). Numerical prediction of resulting rollover shapes and sheared edges after blanking process. Paper presented at 1st. Pan-American Congress on Computational Mechanics, Buenos Aires, Argentina.
Careglio, C., Canales Cardenas, C., Garcia Garino, C., Gabaldon, F., Ponthot, J.-P., & Mirasso, A. (2015, April). A comparative study of finite strain formulations in the buckling of cruciform columns. Paper presented at 1st. Pan-American Congress on Computational Mechanics, Buenos Aires, Argentina.
Peer reviewed
Boemer, D., Rycerski, S., Vis, J., & Ponthot, J.-P. (2015). Discrete Element Method Modeling of Ball Mills - Liner Wear Evolution. In E., Oñate, M., Bischoff, D. R. J., Owen, P., Wriggers, & T., Zohdi, Proceedings of the IV International Conference on Particle-Based Methods – Fundamentals and Applications. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).
Bussetta, P., Boman, R., & Ponthot, J.-P. (2015). Efficient 3D transfer operators based on numerical integration. International Journal for Numerical Methods in Engineering, 102(3-4), 892-929.
Peer reviewed (verified by ORBi)
Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (2015). On some drawbacks and possible improvements of a Lagrangian finite element approach for simulating incompressible flows. In E., Oñate, M., Bischoff, D. R. J., Owen, P., Wriggers, & T., Zohdi, Proceedings of the IV International Conference on Particle-Based Methods – Fundamentals and Applications. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2015). Simulations lagrangienne et arbitraire lagrangienne eulérienne du procédé de profilage. CSMA 2015 - 12e Colloque National en Calcul des Structures.
Dialami, N., Chiumenti, M., Cervera, M., Agelet de Saracibar, C., & Ponthot, J.-P. (2015). Material Flow Visualization Friction Stir Welding via Particle Tracing. International Journal of Material Forming, 8, 167-181.
Peer reviewed (verified by ORBi)
Hubert, C., Dubois, A., Dubar, L., Laugier, M., Legrand, N., Boman, R., Ponthot, J.-P., & Carretta, Y. (2015). Complementary approaches for the numerical simulation of the Micro- Plasto-Hydrodynamic Lubrication regime. Key Engineering Materials, 651-653, 492-497.
Peer reviewed (verified by ORBi)
Mengoni, M., & Ponthot, J.-P. (2015). A generic anisotropic continuum damage model integration scheme adaptable to both ductile damage and biological damage-like situations. International Journal of Plasticity, 66, 46-70.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2014, November). Metafor - Object Oriented Finite Element Code for the Simulation of Large Deformations of Solids. Poster session presented at EU-US Frontiers of Engineering Symposium, Seattle, Washington, USA.
Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2014, September). Lagrangian and Arbitrary Lagrangian Eulerian Simulations of Stationary and Non-Stationary Roll Forming Processes. Paper presented at 1st International conference on COmputational methods in Manufacturing Processes (ICOMP'2014), Saint-Étienne, France.
Laugier, M., Boman, R., Legrand, N., Ponthot, J.-P., Tornicelli, M., Bech, J., & Carretta, Y. (2014). Micro-plasto-hydrodynamic lubrication: a fundamental mechanism in cold rolling. Advanced Materials Research, 966-967, 228-241.
Peer reviewed
Boman, R. (2014, May 16). Numerical simulation of nonlinear mechanical problems using Metafor. Paper presented at Sixth CÉCI Scientific Meeting, Bruxelles, Belgique.
Boman, R., Koeune, R., & Ponthot, J.-P. (2014). Numerical Simulation of Double Cup Extrusion Test Using the Arbitrary Lagrangian Eulerian Formalism. In S. R., Idelsohn (Ed.), Numerical Simulations of Coupled Problems in Engineering (pp. 29-53). Switzerland: Springer.
Peer reviewed
Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (2014). Implementation of a non-orthogonal constitutive model for the finite element simulation of textile composite draping. Applied Mechanics and Materials, 553, 76-81.
Peer reviewed
Arnst, M., & Ponthot, J.-P. (2014). An overview of nonintrusive characterization, propagation, and sensitivity analysis of uncertainties in computational mechanics. International Journal for Uncertainty Quantification, 4, 387-421.
Peer reviewed (verified by ORBi)
Bouffioux, C., Boman, R., Caillet, N., Rich, N., Ponthot, J.-P., & Habraken, A. (2014). Effect of the kinematic hardening in the simulations of the straightening of long rolled profiles. Key Engineering Materials, 611-612, 178-185.
Peer reviewed (verified by ORBi)
Bussetta, P., Dialami, N., Boman, R., Chiumenti, M., Agelet de Saracibar, C., Cervera, M., & Ponthot, J.-P. (2014). Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non‐Cylindrical Pin. Steel Research International, 85(6), 968-979.
Peer reviewed
Canales Cardenas, C., Bussetta, P., Habraken, A., & Ponthot, J.-P. (2014). On the numerical simulation of sheet metal blanking process. Paper presented at 1st. International conference on COmputational methods in Manufacturing Processes (ICOMP'2014), Saint-Étienne, France.
Canales Cardenas, C., & Ponthot, J.-P. (2014). Effect of viscosity on the robustness of the element deletion method for crack propagation modelling. Paper presented at 11th. World Congress on Computational Mechanics (WCCMXI), Barcelona, Spain.
Careglio, C., Canales Cardenas, C., Papeleux, L., Ponthot, J.-P., Garcia Garino, C., & Mirasso, A. (2014). An implementation of the generalized Maxwell viscoelastic constitutive model. In G., Bertolino, M., Cantero, M., Storti, & F., Teruel (Eds.), Mecánica Computacional Vol XXXIII (pp. 1179-1192).
Peer reviewed
Careglio, C., Canales Cardenas, C., Ribero, M., García Garino, C., Mirasso, A., & Ponthot, J.-P. (2014). A large strain elasto-viscoplastic numerical model. In R., Bustamante (Ed.), Proceedings of PACAM XIV.
Peer reviewed
Dialami, N., Chiumenti, M., Cervera, M., Agelet de Saracibar, C., Ponthot, J.-P., & Bussetta, P. (2014). Numerical simulation and Visualization of Material Flow in Friction Stir Welding via Particle Tracing. In S., Idelsohn (Ed.), Numerical Simulations of Coupled Problems in Engineering (pp. 157 - 169). Springer.
Peer reviewed
Koeune, R., & Ponthot, J.-P. (2014). A one phase thermomechanical model for the numerical simulation of semi-solid material behavior. Application to thixoforming. International Journal of Plasticity, 58, 120-153.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., & Papeleux, L. (2014). Thermoviscoplasticity at Finite Strains: A Thermoelastic Predictor-Viscoplastic Corrector Algorithm. In R. B., Hetnarski (Ed.), Encyclopedia of Thermal Stresses (pp. 6092-6105). Springer.
Peer reviewed
Wautelet, G., & Ponthot, J.-P. (2014). The influence of equivalent contact area computation in extended node to surface contact elements. Key Engineering Materials, 618, 1-22.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2013). Arbitrary Lagrangian Eulerian simulations of stationary and non-stationary metal forming processes. AIP Conference Proceedings, 1567, 762-767.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., Boman, R., Jeunechamps, P.-P., Papeleux, L., & Deliège, G. (2013). An implicit erosion algorithm for the numerical simulation of metallic and composite materials submitted to high strain rate. Proceedings of Indian National Science Academy, 79/4(Part A), 519-528.
Peer reviewed (verified by ORBi)
Rossi, B., Degée, H., & Boman, R. (2013). Numerical simulation of the Roll forming of thin-walled sections and evaluation of corner strength enhancement. Finite Elements in Analysis and Design, 72, 13-20.
Peer reviewed (verified by ORBi)
Arnst, M., & Ponthot, J.-P. (2013, September 05). A probabilistic characterization, propagation, and sensitivity analysis of uncertainties in a metal forming application. Paper presented at COMPLAS International Conference on Computational Plasticity, Barcelona, Spain.
Mengoni, M., & Ponthot, J.-P. (2013, August). An enhanced version of Doblaré and Garcia’s bone remodelling model. Poster session presented at 19th Congress of the European Society of Biomechanics, Patra, Greece.
Peer reviewed
Chiu, L. N. S., Falzon, B. G., Boman, R., Chen, B., & Yan, W. (2013). Verification of a novel material model to predict damage in composite structures. International Conference on Structural Integrity and Fracture.
Peer reviewed
Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (2013). Contributions to the process modelling of resin infusion under flexible tooling (RIFT) manufacturing for composite aerostructures. Proceedings of ICCM19.
Peer reviewed
Boman, R., Koeune, R., & Ponthot, J.-P. (2013). Numerical Simulation of Double Cup Extrusion Test using the Arbitrary Lagrangian Eulerian Formalism. Proceedings of Coupled Problems 2013.
Peer reviewed
Bussetta, P., Dialami, N., Boman, R., Chiumenti, M., Agelet de Saracibar, C., Cervera, M., & Ponthot, J.-P. (2013). Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin. Proceedings of "V International Conference on Computational Methods for Coupled Problems in Science and Engineering".
Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (2013). Numerical simulations of asperity crushing using boundary conditions encountered in cold-rolling. Key Engineering Materials, 554-557, 850-857.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2013). Enhanced ALE Data Transfer Strategy for Explicit and Implicit Thermomechanical Simulations of High-Speed Processes. International Journal of Impact Engineering, 53, 62-73.
Peer reviewed (verified by ORBi)
Chiu, L. N. S., Falzon, B. G., & Boman, R. (2013). A Continuum Damage Mechanics Model for the Analysis of the Crashworthiness of Composite Structures: A work in progress. Proceedings of the 15th Australian Aeronautical Conference.
Pierce, R. S., Falzon, B. G., & Boman, R. (2013). Relating Local Permeability Changes to the Deformation of Preforms during the Manufacture of Complex-Shaped Composite Structures. Proceedings of the 15th Australian Aeronautical Conference.
Peer reviewed
Mengoni, M., & Ponthot, J.-P. (2013, January). A bone remodeling model for long term orthodontic tooth movement. Paper presented at International Symposium on Plasticity, Nassau, Bahamas.
Peer reviewed
Biotteau, E., Bussetta, P., & Ponthot, J.-P. (2013). Modeling thixoforming process using the eXtended Finite Element Method and the Arbitrary Lagrangian Eulerian formulation. Key Engineering Materials, 554-557, 691-698.
Peer reviewed (verified by ORBi)
Garcia-Garino, C., Andia fages, S., Mirasso, A., & Ponthot, J.-P. (2013). Numerical simulation of finite strain viscoplastic problems. Journal of Computational and Applied Mathematics, 246, 174-184.
Peer reviewed (verified by ORBi)
Jeunechamps, P.-P., & Ponthot, J.-P. (2013). An efficient 3D implicit approach for the thermomechanical simulation of elastic–viscoplastic materials submitted to high strain rate and damage. International Journal for Numerical Methods in Engineering, 94, 920-960.
Peer reviewed (verified by ORBi)
Jeunechamps, P.-P., & Ponthot, J.-P. (2013). Implicit 2D Numerical Simulation of Materials Submitetd to High Strain Rates including Fracture. Key Engineering Materials, 535-536, 80-84.
Peer reviewed (verified by ORBi)
Koeune, R., & Ponthot, J.-P. (2013). A Thermomechanical Model Dedicated to Thixoforming. Application to Semi-Solid Forming. Solid State Phenomena, 192-193, 269-275.
Peer reviewed
Laurent, C., Bohme, B., d'Otreppe de Bouvette, V., Balligand, M., & Ponthot, J.-P. (2013). Subject-specific finite element modelling of canine long bones up to fracture. Computer Methods in Biomechanics and Biomedical Engineering. Imaging and Visualization, 16, 270-271.
Peer reviewed (verified by ORBi)
Nguyen, D. T., Rauchs, G., & Ponthot, J.-P. (2013). The Impact of Surface Higher Order Differentiability in Two-dimensional Contact Elements. Journal of Computational and Applied Mathematics, 246, 195-205.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., Koeune, R., & Boman, R. (2013). A continuous fluid/solid transition model for semi-solid material modeling. Application to thixoforging. 33° SENAFOR (CD) (pp. 08).
Boman, R., & Ponthot, J.-P. (2012). Efficient ALE mesh management for 3D quasi-Eulerian problems. International Journal for Numerical Methods in Engineering, 92(10), 857-890.
Peer reviewed (verified by ORBi)
Boman, R., Parrico, A., Legrand, N., & Ponthot, J.-P. (2012). Arbitrary Lagrangian Eulerian Modelling of Tension Levelling. Matériaux et Techniques, 100(Hors série 2012), 40-42.
Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (2012, October). Three-dimensional Modelling of Asperity Crushing. Paper presented at Journées Annuelles de la SF2M 2012, Paris, France.
Biotteau, E., & Ponthot, J.-P. (2012, September 12). Modeling frictional contact conditions with the penalty method in the extended finite element framework. Paper presented at ECCOMAS, Vienne, Autriche.
Mengoni, M., D'Otreppe, V., & Ponthot, J.-P. (2012). A bone remodelling model for long term orthodontic tooth movement. Journal of Biomechanics, 45(Supplement 1), 180.
Peer reviewed (verified by ORBi)
de Bien, C., Mengoni, M., D'Otreppe, V., Freichels, H., Jérôme, C., Ponthot, J.-P., Léonard, A., & Toye, D. (2012). Development of a biomechanical model of deer antler cancellous bone based on X-ray microtomographic images. Micro-CT User Meeting 2012 - Abstract Book (pp. 137-145).
Peer reviewed
Mengoni, M., D'Otreppe, V., & Ponthot, J.-P. (2012). A fully nonlinear finite element model for orthodontic tooth movement prediction. Proceedings of the 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering.
Peer reviewed
Mengoni, M., Voide, R., de Bien, C., Freichels, H., Jérôme, C., Léonard, A., Toye, D., van Lenthe, G. H., Müller, R., & Ponthot, J.-P. (2012). A non-linear homogeneous model for bone-like materials under compressive load. International Journal for Numerical Methods in Biomedical Engineering, 28(2), 334-348.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2012). ALE Simulations of Metal Forming Processes. In Akhtar S. Khan, Farhoud Kabirian, & Jian Liu (Eds.), Non-linear Response of Conventional & Advanced Materials, and Multi-scale Modeling (pp. 40-42). NEAT Press.
Peer reviewed
Bussetta, P., Daniel, M., & Ponthot, J.-P. (2012). The adapted augmented Lagrangian method: a new method for the resolution of the mechanical frictional contact problem. Computational Mechanics, 49(2), 259-275.
Peer reviewed (verified by ORBi)
Bussetta, P., & Ponthot, J.-P. (2012). A finite volume based data transfer method for remeshing. Application to metal forming problems. Proceedings of the 18th International Symposium on Plasticity & Its Current Applications.
Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (2012). Mixed Lubrication Regime in Cold Strip Rolling. 2nd Annual ArcelorMittal CFD and Thermomechanics Days 2012.
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2012). Generating smooth surface meshes from multi-region medical images. International Journal for Numerical Methods in Biomedical Engineering, 28(6-7), 642-660.
Peer reviewed (verified by ORBi)
Guo, W., Rauchs, G., Papeleux, L., Zhang, W., Gitzhofer, F., & Ponthot, J.-P. (2012). Evaluation of the mechanical properties of plasma-sprayed coating by nanoindentation technology. Mechanics and Industry, 13(3), 151-162.
Peer reviewed (verified by ORBi)
Pascan, O., Zhang, W., & Ponthot, J.-P. (2012). Mechanical Buckling of Composite Panels with/without Cutouts. International Journal of Plant Engineering and Management, 17(2), 65-76.
Peer reviewed
Ribero, M., Careglio, C., Garcia Garino, C., Mirasso, A., & Ponthot, J.-P. (2012). Three-Dimensional Large Starin Elasto-Viscoplastic Constitutive Model. In A., Cardona (Ed.), Proceedings of MECOM 2012, Mecanica Computational Vol XXXI (pp. 1607-1625).
Peer reviewed
D'Otreppe, V., Mengoni, M., Boman, R., & Ponthot, J.-P. (2011, November 14). Image-based Finite Element Mesh Generation for Microstructures. Paper presented at Fifth International Conference on Advanced COmputational Methods in ENgineering (ACOMEN 2011), Liège, Belgium.
Nsiampa, N., D'Otreppe, V., Robbe, C., Papy, A., & Ponthot, J.-P. (2011, November 14). Development of a thorax CT-scan based finite element model for thoracic injury assessment. Paper presented at Advanced COmputational Methods in ENgineering (ACOMEN 2011), Liège, Belgium.
Bussetta, P., Boman, R., & Ponthot, J.-P. (2011). Comparison of Data Transfer Methods between Meshes in the Frame of the Arbitrary Lagrangian Eulerien Formalism. Proceedings of "Fifth International Conference on Advanced COmputationalMethods in ENgineering".
Mengoni, M., D'Otreppe, V., & Ponthot, J.-P. (2011, November). On the periodontal ligament representation in 3D finite element analysis for orthodontic tooth movement models. Paper presented at Fifth International Conference on Advanced COmputational Methods in ENgineering (ACOMEN 2011), Liège, Belgique.
Rossi, B., Boman, R., & Degée, H. (2011). Effects of the roll forming process on the mechanical properties of thin-walled sections made of non linear metallic materials. Proceedings of the 6th International Conference on Thin Walled Structures: ICTWS2011, Timisoara 5-7 September 2011 (pp. 633-640).
Peer reviewed
Boman, R., & Ponthot, J.-P. (2011, September). Continuous Metal Forming Process Simulation using the Arbitrary Lagrangian Eulerian Formulation. Steel Research International, 367-372.
Peer reviewed
Boman, R., & Ponthot, J.-P. (2011). Numerical Simulation of Stationary Roll Forming using ALE formalism. In E., Oñate, D. R. J., Owen, D., Peric, & B., Suàrez (Eds.), Computational Plasticity XI - Fundamentals and Applications.
Carretta, Y., Boman, R., Stephany, A., Legrand, N., Laugier, M., & Ponthot, J.-P. (2011). METALUB – A Slab Method Software for the Numerical Simulation of Mixed Lubrication Regime in Cold Strip Rolling. Proceedings of the Institution of Mechanical Engineers. Part J, Journal of Engineering Tribology, 225(9), 894-904.
Peer reviewed (verified by ORBi)
Böhme, B., D'Otreppe, V., Ponthot, J.-P., & Balligand, M. (2011, July 07). Considerations on the Pathophysiology of Canine Condylar Fractures by Finite Element Analysis. Poster session presented at 20th Annual Scientific Meeting of the European College of Veterinary Surgeons, Ghent, Belgium.
Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2011, July 05). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber. Poster session presented at XXIIIrd congress of the International Society of Biomechanics, Brussels, Belgium.
Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2011). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber. XXIIIrd congress of the International Society of Biomechanics, July 3-7, 2011 (pp. 208). Brussels, Belgium: International Society of Biomechanics.
Peer reviewed
D'Otreppe, V., Böhme, B., Balligand, M., & Ponthot, J.-P. (2011, July 04). Finite element simulation of canine humeral condylar fractures. Paper presented at ISB 2011, Brussels, Belgium.
Jeunechamps, P.-P., Boman, R., Papeleux, L., & Ponthot, J.-P. (2011). Damage and Fracture of Materials Submitted to High Strain Rates. A Thermomechanically Implicit Coupled Approach with Element Erosion. Proceedings of the 3rd International Conference on Impact Loading of Lightweight Structures.
Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2011, June 01). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber. Poster session presented at 2011 NHLBI /VCU - World Congress on Mathematical Modeling and Computational Simulation of Cardio vascular and Cardiopulmonary Dynamics, Williamsburg, VA, USA.
Bussetta, P., & Ponthot, J.-P. (2011). Comparison of Data Transfer Methods between two different meshes. Proceedings of "IV International Conference on Computational Methods for Coupled Problems in Science and Engineering".
Carretta, Y., Boman, R., Stephany, A., Bouache, T., Canivenc, R., Montmitonnet, P., Legrand, N., Laugier, M., & Ponthot, J.-P. (2011). Thermomechanical simulation of roll forming process based on the coupling of two independent solvers. Proceedings of the IV International Conference on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2011.
Peer reviewed
Lerinckx, D., Baguet, M., Renaville, F., de Bergeyck, V., Luminet, O., Kita, J.-C., Malgrange, B., Ponthot, J.-P., Schneider, N., Corbisier, F., Vanclef, L., Raes, M., Verhasselt, J.-M., Hubert, M., Culot, C., Tenenbaum, A., Gérard, M., & Renaville, F. (Ed.). (2011). Comparaison des outils bibliographiques et bibliométriques Web of Science et Scopus : rapport du groupe de réflexion mis en place par la Bibliothèque Interuniversitaire de la Communauté française de Belgique (BICfB). Belgium.
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2011). Generating smooth surface meshes from labelled medical datasets. In P., Nithiarasu, R., Löhner, R., van Loon, I., Sazonov, & X., Xie (Eds.), CMBE11: 2nd International Conference on Computational & Mathematical Biomedical Engineering, 30 March - 1 April, 2011, Washington D.C. U.S.A (First edition, March 2011, pp. 213-216). Alexandria, VA, US: All American Printing inc.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2011). Développement d’un outil de calcul de la charge de ruine des roues aubagées en titane (2). ULg - Université de Liège.
Boman, R., & Ponthot, J.-P. (2011). Continuous Roll Forming Simulation using Arbitrary Lagrangian Eulerian Formalism. Key Engineering Materials, 473, 564-571.
Peer reviewed (verified by ORBi)
Deliège, G., Hannay, S., & Ponthot, J.-P. (2011). APC-L315/6-ULG-FSA : Rapport de validation par comparaison simulation/essai.
Boman, R., & Ponthot, J.-P. (2011). Application of the Arbitrary Lagrangian Eulerian Formalism to Stationary Roll Forming Simulations. Advanced Materials Research, 189-193, 1827-1833.
Peer reviewed
Ponthot, J.-P., & Boman, R. (2011). Advances in Metal Forming Simulation of using Arbitrary Lagrangian Eulerian Formalism. In A., Khan, C., Meredith, & B., Farrokh (Eds.), Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling : Proceedings of PLASTICITY'11, Seventeenth International Symposium on Plasticity and its Current Applications (pp. 223-225). Maryland, USA: Neat Press.
Peer reviewed
Carretta, Y., Legrand, N., Laugier, M., & Ponthot, J.-P. (2011). Numerical Simulations of Asperity Crushing - Application to Cold Rolling. Proceedings of ESAFORM : Belfast, 27-29th april 2011.
Peer reviewed
Deliège, G., Hannay, S., & Ponthot, J.-P. (2011). Modélisation par éléments finis de l'endommagement des composites laminés à fibres tissées soumis à l'impact. Paper presented at 10e Colloque National en Calcul des Structures, Giens, France.
Koeune, R., & Ponthot, J.-P. (2011). Numerical simulations of thixoforming processes : development and comparaison of several semi-solid constitutive laws. Poster session presented at PLASTICITY 2011 – International Symposium on Plasticity and its current applications, Puerto Vallarta, Mexico.
Peer reviewed
Mengoni, M., & Ponthot, J.-P. (2011). On the periodontal ligament representation in orthodontic tooth movement modelisation. Paper presented at XXIII Congress of the International Society of Biomechanics, Brussels, Belgium.
Peer reviewed
Mengoni, M., Voide, R., Toye, D., Léonard, A., van Lenthe, G. H., & Ponthot, J.-P. (2011). A non-linear homogeneous model for bone-like materials under compressive load. In P., Nithiarasu, R., Löhner, R., van Loon, I., Sazonov, & X., Xie (Eds.), Conference Proceedings - 2nd International Conference on Computational & Mathematical Biomedical Engineering (pp. 355-358). Swansea, United Kingdom.
Peer reviewed
Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2010, November 26). Influence of thermoelectric coupling on ectopic beats generated by mechano-electric feedback (MEF) in a one-dimensional cardiac fiber model. Poster session presented at 9th Belgian Day on Biomedical Engineering, Bruxelles, Belgique.
Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2010). Influence of thermoelectric coupling on ectopic beats generated by mechano-electric feedback (MEF) in a one-dimensional cardiac fiber model. 9th Belgian Day on Biomedical Engineering, Friday November 26th 2010 in the Academy Palace, Hertogstraat 1, 1000 Brussels.
Peer reviewed
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010, November 26). Multiple Material Mesh Generation For Biomedical Applications. Poster session presented at National Committee on Biomedical Engineering - National Day, Brussels, Belgium.
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010). Multiple material mesh generation for biomedical applications. Proceedings of the 9th belgian day on biomedical engineering.
Peer reviewed
Vigneron, L. M., Boman, R., Ponthot, J.-P., Robe, P., Warfield, S. K., & Verly, J. (2010). Enhanced FEM-based Modeling of Brain Shift Deformation in Image-Guided Neurosurgery. Journal of Computational and Applied Mathematics, 234, 2046-2053.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2010). Continuous Roll Forming Simulation Using Arbitrary Lagrangian Eulerian Formalism. In N., Khalili, S., Valliappan, Q., Li, & A., Russell (Eds.), Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics (pp. 278). Sydney, Australia: Centre for Infrastructure Engineering and Safety.
Mengoni, M., & Ponthot, J.-P. (2010, July). A continuum damage mechanics based bone remodeling model in a finite strains framework. Poster session presented at 17th Congress of the European Society of Biomechanics, Edinburgh, UK.
Peer reviewed
Boman, R., & Ponthot, J.-P. (2010). New Advances in Numerical Simulation of Stationary Processes using Arbitrary Lagrangian Eulerian Formalism. Application to Roll Forming Process. AIP Conference Proceedings, 1252, 133-140.
Peer reviewed (verified by ORBi)
Boman, R. (2010). Développement d’un formalisme Arbitraire Lagrangien Eulérien tridimensionnel en dynamique implicite. Application aux opérations de mise à forme. Unpublished doctoral thesis, Université de Liège, ​​Belgique.
Boman, R., & Ponthot, J.-P. (2010). Advances in Numerical Simulation of Stationary Processes using Arbitrary Lagrangian Eulerian Formalism. Application to Roll Forming Process. ECCM 2010, 4th European Conference on Computational Mechanics (on CD-ROM).
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010). Smooth multiple-region mesh generation for biomedical applications. ECCM 2010, 4th European Conference on Computational Mechanics (on CD-ROM).
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2010). Développement d’un outil de calcul de la charge de ruine des roues aubagées en titane (1). ULg - Université de Liège.
Bussetta, P., & Ponthot, J.-P. (2010). Comparison of Field Transfer Methods between two meshes. Proceedings of "IV European Conference on Computational Mechanics".
Carretta, Y., Stephany, A., Legrand, N., Laugier, M., & Ponthot, J.-P. (2010). Metalub – A Slab Method software for the numerical simulation of mixed lubrication regime. Application to cold rolling. ICTMP 2010 - International Conference on Tribology in Manufacturing processes.
Peer reviewed
Guo, W., Rauchs, G., ZHang, W. H., & Ponthot, J.-P. (2010). Influence of friction in material characterization in micro-indentation measurement. Journal of Computational and Applied Mathematics, 234, 2183-2192.
Peer reviewed (verified by ORBi)
Koeune, R., & Ponthot, J.-P. (2010). An improved constitutive model for the numerical simulation of semi-solid thixoforming. Journal of Computational and Applied Mathematics, 234, 2287-2296.
Peer reviewed (verified by ORBi)
Koeune, R., & Ponthot, J.-P. (2010). Semi-solid metallic alloys modeling for the simulation of thixoforming processes. In M., Vaz Jr., E. A., de Souza Neto, & P. A., Munoz-Rojas (Eds.), Computational Materials Modeling (pp. 205-256). Wiley-VCH.
Koeune, R., & Ponthot, J.-P. (2010). Validation of a one-phase thermomechanical model for thixoforming of steel by comparison numerical and experimental results on two semi-solid extrusion tests.
Peer reviewed
Koeune, R., Rassili, A., Pierret, J.-C., & Ponthot, J.-P. (2010). Validation of a one-phase thermomechanical model for thixoforming of steel by comparison between numerical and experimental results on two semi-solid extrusion tests. In K., Yonglin (Ed.), 11th International Conference on Semi-Solid Processing of Alloys and Composites. China.
Peer reviewed
Mengoni, M., & Ponthot, J.-P. (2010). A Continuum Damage Mechanics based bone remodelling model in a finite strain framework. ECCM 2010, 4th European Conference on Computational Mechanics (pp. 15).
Peer reviewed
Mengoni, M., & Ponthot, J.-P. (2010). Isotropic continuum damage/repair model for alveolar bone remodelling. Journal of Computational and Applied Mathematics, 234, 2036-2045.
Peer reviewed (verified by ORBi)
Rauchs, G., & Ponthot, J.-P. (2010). On the impact of the time increment on sensitivity analysis during the elastic-to-viscoplastic transition in metals. Computational Mechanics, 46, 559-575.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2009). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (8). ULg - Université de Liège.
Boman, R., Depauw, A., Hérisson, D., & Ponthot, J.-P. (2009). Stationary Roll Forming Simulation using Arbitrary Lagrangian Eulerian Formalism. Proceedings of International Roll Forming Congress 2009 (pp. 33-40).
Peer reviewed
Depauw, A., Hérisson, D., Boman, R., & Kergen, R. (2009). Roll forming of Ultra High Strength Steels: progresses in experimental and modelling knowledge. Proceedings of International Roll Forming Congress 2009 (pp. 101-108).
Peer reviewed
Deliège, G., Papeleux, L., & Ponthot, J.-P. (2009). Implicit FE simulations of composite dynamic failure. Proceedings of DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (pp. 1609 - 1614).
Jeunechamps, P.-P., & Ponthot, J.-P. (2009). Implicit 2D numerical simulation of materials submitted to high strain rate including failure. Proceedings of DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (pp. 1491 - 1497).
Boman, R., & Ponthot, J.-P. (2009). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (7). ULg - Université de Liège.
D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2009). Génération de maillages pour la creation de modèles biomécaniques du cerveau. In M., Raous, P., Pasquet, & C., Rey (Eds.), Neuvième Colloque National en Calcul des Structures (pp. 527-532). Massy, France: Copie Clean.
Mengoni, M., & Ponthot, J.-P. (2009). Anisotropic continuum damage model coupled to viscoplasticity for a pressure dependent alveolar bone remodeling law. National Congress on Theoretical and Applied Mechanics.
Mengoni, M., Limme, M., & Ponthot, J.-P. (2009, February). Vers un modèle d'endommagement anisotrope pour le remodelage osseux en orthodontie. Poster session presented at Journée de la recherche, Sherbrooke, Canada.
Andia Fages, S., Raichman, S., Mirasso, A., Garcia Garino, C., & Ponthot, J.-P. (2009). Integracion Numerica del Problema Viscoplastico.
Peer reviewed
Bussetta, P., Marceau, D., & Ponthot, J.-P. (2009). Résolution du problème de contact mécanique frottant : méthode du lagrangien augmenté adapté. Proceedings of “9ème Colloque National en Calcul des Structures.
Guo, W., Raughs, G., Zhang, W. H., & Ponthot, J.-P. (2009). Study of the influence of friction in imperfect conical indentation for elasto-plastic material. Proceedings of VIENNANO’09 – 3rd Vienna International Conference on Nano Technology.
Peer reviewed
Jeunechamps, P.-P., & Ponthot, J.-P. (2009). Damage and fracture of ductile materials submitted to high strain rates. An implicit thermomechanically coupled approach with element erosion. Proceedings of “PACAM XI, 11th Pan-American Congress of Applied Mechanics.
Jeunechamps, P.-P., & Ponthot, J.-P. (2009). Damage and fracture of materials submitted to high strain rates. A thermomechanically coupled approach with element erosion. Proceedings of “Dynamic behaviour of materials”, Workshop in memory of Prof. J.R. Klepaczko (pp. 235-242). A. Rusinek and P. Chevrier.
Jeunechamps, P.-P., & Ponthot, J.-P. (2009). Numerical simulation of materials submitted to high strain rates. A thermomechanically coupled approach including damage and fracture. PLASTICITY 2009.
Koeune, R., & Ponthot, J.-P. (2009). One Phase Constitutive Models for the Simulation of Thixoforming Processes. Paper presented at Proceedings of PLASTICITY 2009 – International symposium on Plasticity and its current applications, Saint-Thomas, U.S. Virgin Islands, USA.
Mengoni, M., & Ponthot, J.-P. (2009). A pressure dependent bone remodeling model for application in orthodontics. XXIInd Congress of the International Society of Biomechanics.
Peer reviewed
Ponthot, J.-P., Guo, W., Rauchs, G., & Zhang, W. (2009). Study of the influence of friction in imperfect conical indentation for elasto-plastic material. Tribology - Materials, Surfaces and Interfaces, 3(4), 151-157.
Peer reviewed
Boman, R., & Ponthot, J.-P. (2008). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (6). ULg - Université de Liège.
Boman, R. (2008, November). Modelling of forming using Metafor – a large strains FE software. Paper presented at University of Birmingham.
Boman, R., Papeleux, L., & Ponthot, J.-P. (2008). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Forming Process. In P., Hora (Ed.), Numisheet 2008: 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (pp. 405-410). ETH Zurich, Switzerland: Institute of Virtual Manufacturing.
Peer reviewed
Hogge, M., Van Keer, R., Noels, L., Stainier, L., Ponthot, J.-P., Remacle, J.-F., & Dick, E. (Eds.). (2008). Actes du Congrès ACOMEN 2008, Second international Conference on Advanced Computational Methods in Engineering, Liège, Belgium, May 26-38, 2008.
Mengoni, M., & Ponthot, J.-P. (2008). A continuum damage model for alveolar bone remodeling. Fourth International Conference on Advance COmputational Methods in ENgineering - ACOMEN 2008.
Peer reviewed
Vigneron, L. M., Boman, R., Ponthot, J.-P., Robe, P., Warfield, S. K., & Verly, J. (2008). Issues in FEM-based Modeling of Brain Shift in Neurosurgery. In M., Hogge, R., Van Keer, L., Noels, L., Stainier, J.-P., Ponthot, J.-F., Remacle, & E., Dick (Eds.), Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (on CD-ROM). Belgium: University of Liège.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2008). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (5). ULg - Université de Liège.
Ponthot, J.-P., Boman, R., Papeleux, L., Wouters, P., Daolio, G., Duroux, P., & Kergen, R. (2008). An Efficient Numerical Model for the Numerical Simulation of Forming Processes. In A., Khan & B., Farrokh (Eds.), Mechanics and Mechanisms of Finite Plastic Deformation : Proceedings of PLASTICITY'08, Fourteenth International Symposium on Plasticity and its Current Applications (pp. 70-72). Maryland, USA: Neat Press.
Peer reviewed
Bui, Q. V., & Ponthot, J.-P. (2008). Numerical simulation of cold roll-forming processes. Journal of Materials Processing Technology, 202(1-3), 275-282.
Peer reviewed (verified by ORBi)
Garcia-Garino, C., & Ponthot, J.-P. (2008). A quasi-coulomb model for frictional contact interfaces. Application to metal forming simulations. Latin American Applied Research, 38(2), 95-104.
Peer reviewed
Guo, W., Ponthot, J.-P., Zhang, W., & Rauchs, G. (2008). The influence of friction on elasto-plastic material in nanoindentation. Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (pp. 14). M. Hogge, R. Van Keer, L. Noels, L. Stainier, J.-P. Ponthot, J.-F. Remacle, E. Dick.
Karaseva, O., Stainier, L., Careglio, C., Garcia-Garino, C., Mirasso, A., & Ponthot, J.-P. (2008). A comparison of triangle and quadrangle finite elements for large strain elastoplastic formulations. Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (pp. 11). M. Hogge, R. Van Keer, L. Noels, L. Stainier, J.-P. Ponthot, Editors: J.-F. Remacle, E. Dick.
Koeune, R., & Ponthot, J.-P. (2008). An Improved Constitutive Model for the Numerical Simulation of Semi-Solid Thixoforming. Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (pp. 10). Editors: M. Hogge, R. Van Keer, L. Noels, L. Stainier, J.-P. Ponthot, J.-F. Remacle, E. Dick.
Koeune, R., & Ponthot, J.-P. (2008). A One Phase Thermomechanical Model for Semi-Solid Thixoforming. S2P, the 10th International Conference on Semi-Solid Processing of Alloys and Composites.
Peer reviewed
Koeune, R., & Ponthot, J.-P. (2008). A One-Phase Thermomechanical Constitutive Model for the Numerical Simulation of Semi-Solid Thixoforming. Proceedings of ESAFORM 2008, Conference on material forming.
Peer reviewed
Koeune, R., & Ponthot, J.-P. (2008). A one-phase thermomechanical constitutive model for the numerical simulation of semi-solid thixoforming. International Journal of Material Forming, suppl. 1, 1007-1010.
Peer reviewed (verified by ORBi)
Koeune, R., & Ponthot, J.-P. (2008). A one-phase thermomechanical Model for Semi-Solid thixoforming. Solid State Phenomena, 141-143, 629-635.
Peer reviewed (verified by ORBi)
Mengoni, M., & Ponthot, J.-P. (2008). A damage/repair model for alveolar bone remodeling. In Middleton, Evans, Holt, Jacobs, & Walker (Eds.), 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering : CMBBE2008, Porto, Porugal. Arup.
Peer reviewed
Nguyen, N. H., PHAM, V. N., Hogge, M., & Ponthot, J.-P. (2008). An assumed natural strain technique for 2D solid-shell elements. Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (pp. 13). M. Hogge, R. Van Keer, L. Noels, L. Stainier, J.-P. Ponthot, Editors: J.-F. Remacle, E. Dick.
Noels, L., Stainier, L., & Ponthot, J.-P. (2008). A first-order energy-dissipative momentum-conserving scheme for elasto-plasticity using the variational updates formulation. Computer Methods in Applied Mechanics and Engineering, 197(6-8), 706–726.
Peer reviewed (verified by ORBi)
Nsiampa, N., Ponthot, J.-P., & Noels, L. (2008). Comparative study of numerical explicit schemes for impact problems. International Journal of Impact Engineering, 35(12), 1688-1694.
Peer reviewed (verified by ORBi)
Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). An Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of Forming Processes. International Workshop 2007: Advancements in Design Optimization of Materials, Structures and Mechanical Systems (pp. 142-151).
Vigneron, L., Boman, R., Robe, P., Warfield, S. K., & Verly, J. (2007). 3D FEM/XFEM-based Biomechanical Brain Modeling for Preoperative Image Update. In K., Miller, K. D., Paulsen, A. A., Young, & P. M. F., Nielsen (Eds.), MICCAI 2007 Workshop Proceedings : Computational Biomechanics for Medicine II (pp. 33-42).
Peer reviewed
Fancello, E., Vigneron, L., Noels, L., Ponthot, J.-P., Boman, R., & Stainier, L. (2007). Identificación de parámetros de viscoelasticidad finita aplicada a la simulación del comportamiento mecánico de masa encefálica. Congreso Iberoamericano de Ingenieria Mecanica.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Forming Process. In D. R. J., Owen & E., Oñate (Eds.), COMPLAS 2007 : IX International Conference on Computational Plasticity Fundamentals and Applications (on CD-ROM).
Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (4). ULg - Université de Liège.
Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). A General Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of 3D forming Processes. AIP Conference Proceedings, 908, 179-184.
Peer reviewed (verified by ORBi)
Mengoni, M., Charlier, R., & Ponthot, J.-P. (2007). Une comparaison de différents modèles élasto-plastiques pour la modélisation du remodelage osseux en orthodontie. 8ème Colloque National en Calcul des Structures.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (3). ULg - Université de Liège.
Jeunechamps, P.-P., & Ponthot, J.-P. (2007). Numerical simulation of materials submitted to high strain rates. A thermomechanical coupled approach. Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2007. M. Papadrakakis, E. Oñate and B. Schrefler (Eds).
Koeune, R., & Ponthot, J.-P. (2007). Numerical simulation of semi-solid thixoforming. Int. Conf. on Computational Plasticity, COMPLAS IX. E. Oñate and D.R.J. Owen (Eds).
Koeune, R., & Ponthot, J.-P. (2007). Thermomechanical one-phase modeling of semi-solid thixoforming. Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2007. M. Papadrakakis, E. Oñate and B. Schrefler (Eds).
Montmitonnet, P., Stephany, A., Cassarini, S., Ponthot, J.-P., Laugier, M., & Legrand, N. (2007). Modelling of metal forming lubrication by O/W emulsions. Modelling of metal forming lubrifrication by O/W emulsions (pp. 85-90).
Noels, L., Stainier, L., & Ponthot, J.-P. (2007). An Energy-Dissipative Momentum-Conserving Time Integration Algorithm for Viscoplastic Hyperelastic Models Based on the Variational Updates Framework.
Noels, L., Stainier, L., & Ponthot, J.-P. (2007). Introduction of Numerical Dissipation in the Variational Updates Framework for Elasto-Plastic Constitutive Models.
Noels, L., Stainier, L., & Ponthot, J.-P. (2007). A New Energy-Dissipative Momentum-Conserving Time Integration Scheme Using the Variational Updates Framework.
Trichon, S., Bonte, M. H. A., van den Boogaard, A. H., & Ponthot, J.-P. (2007). A study for efficiently solving optimisation problems with an increasing number of design variables.
Peer reviewed
Trichon, S., Bonte, M., Ponthot, J.-P., & Van den Boogaard, T. (2007). Aspects of approximate optimisation: overcoming the curse of dimensionality and design of experiments. Proceedings of IPDOS2007, Inverse Problems, Design and Optimization Symposium.
Verly, J., Vigneron, L. M., Boman, R., Phillips, C. L., & Chellaoui, K. (2007). Le rôle de l’ingénieur en imagerie médicale. Paper presented at Meeting of the 160th anniversary of the AILg (Association des Ingénieurs sortis de l’Université de Li`ege): L’ingénieur et les sciences du vivant, Liège, Belgium.
Peer reviewed
Vigneron, L., Boman, R., Ponthot, J.-P., Robe, P. A., Warfield, S. K., & Verly, J. (2007). Navigation neurochirurgicale basée sur des modèles biomécaniques. Paper presented at Meeting of the 160th anniversary of the AILg (Association des Ingénieurs sortis de 14 l’Université de Liège): L’ingénieur et les sciences du vivant, Liège, Belgium.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Cold Roll Forming and Metal Cutting Simulation using a 3D Arbitrary Lagrangian Eulerian Formulation. In G., de Saxcé & N., Moës (Eds.), Modeling in Mechanical and Civil Engineering : Collection of Papers from Prof. Nguyen Dang Hung's former students. HCM City, Vietnam: Vietnam National University Ho Chi Minh City Publishing House.
Garcia Garino, C., Ponthot, J.-P., Mirasso, A., Koeune, R., Jeunechamps, P.-P., & Careglio, C. (2006). Numerical simulation of large strain rate dependent J2 problems. Proceedings of ENIEF 2006, Mecanica Computational (pp. 1927-1946). A. Cardona et al. (Eds.).
Verly, J., Kavec, M., Vigneron, L., Phillips, C., Boman, R., Libertiaux, V., Ponthot, J.-P., Cescotto, S., Robe, P., Martin, D., Wikler, D., Levivier, M., & Brotchi, J. (2006). Problems and Challenges of Image-Guided Neurosurgical Navigation and Intervention. Lecture Notes in Computer Science, 4263, 35.
Peer reviewed
Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (2). ULg - Université de Liège.
Jeunechamps, P.-P., & Ponthot, J.-P. (2006). An efficient implicit approach for the thermomechanical behavior of materials submitted to high strain rates. Journal de Physique IV, 134, 515-520.
Peer reviewed
Boman, R., Papeleux, L., Bui, Q. V., & Ponthot, J.-P. (2006). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Cold Roll Forming Process. Journal of Materials Processing Technology, 177(1-3), 621-625.
Peer reviewed (verified by ORBi)
Vigneron, L., Boman, R., Robe, P., Warfield, S. K., & Verly, J. (2006). Preoperative Brain Image Update with FEM- and XFEM-based Biomechanical Model. 7th World Congress on Computational Mechanics (on CD-ROM).
Boman, R., Papeleux, L., Viet, B. Q., & Ponthot, J.-P. (2006). A 3D Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of Forming Processes. Application to cold roll forming and metal cutting. In C. A., Mota Soares (Ed.), Proceedings of ECCM 2006, III European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering (on CD-ROM).
Peer reviewed
Jeunechamps, P.-P., Ho, K. C., Lin, J., Ponthot, J.-P., & Dean, T. A. (2006). A closed form technique to predict springback in creep age-forming. International Journal of Mechanical Sciences, 48(6), 621-629.
Peer reviewed (verified by ORBi)
Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D., Santos & A., Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).
Peer reviewed
Fancello, E., Ponthot, J.-P., & Stainier, L. (2006). A variational formulation of constitutive models and updates in non-linear finite viscoelasticity. International Journal for Numerical Methods in Engineering, 65(11), 1831-1864.
Peer reviewed (verified by ORBi)
Garcia, C., Celentano, D., Flores, F., & Ponthot, J.-P. (2006). Numerical modelling and experimental validation of steel deep drawing processes - Part I. Material characterization. Journal of Materials Processing Technology, 172(3), 451-460.
Peer reviewed (verified by ORBi)
Garcia, C., Celentano, D., Flores, F., Ponthot, J.-P., & Oliva, O. (2006). Numerical modelling and experimental validation of steel deep drawing processes - Part II. Applications. Journal of Materials Processing Technology, 172(3), 461-471.
Peer reviewed (verified by ORBi)
Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes (1). ULg - Université de Liège.
Fancello, E., Ponthot, J.-P., Vigneron, L., & Stainier, L. (2006). A viscoelastic formulation for finite strains: application to brain soft tissues. Proceedings of XXVII CILAMCE – Iberian Latin American Congress on Computational Methods in Engineering.
Jeunechamps, P.-P., & Ponthot, J.-P. (2006). An efficient implicit approach for the thermomechanical behavior of materials submitted to high strain rates. Proceedings of DYMAT 2006.
Peer reviewed
Jeunechamps, P.-P., & Ponthot, J.-P. (2006). A finite element method for thermomechanical simulation of materials submitted to high strain rates with an implicit approach. 7th National Congress on Theoretical and Applied Mechanics.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Energy conserving balance of explicit time steps to combine implicit and explicit algorithms in structural dynamics. Computer Methods in Applied Mechanics and Engineering, 195(19-22), 2169–2192.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2006). An energy momentum conserving algorithm using the incremental potential for visco-plasticity. Paper presented at 7th World Congress on Computational Mechanics, Los Angeles, USA.
Noels, L., Stainier, L., & Ponthot, J.-P. (2006). An energy momentum conserving algorithm using the variational formulation of visco-plastic updates. International Journal for Numerical Methods in Engineering, 65(6), 904–942.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2006). Simulation of crashworthiness problems with improved contact algorithms for implicit time integration. International Journal of Impact Engineering, 32(5), 799-825.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., & Kleinermann, J.-P. (2006). A cascade optimization methodology for automatic parameter identification and shape/process optimization in metal forming simulation. Computer Methods in Applied Mechanics and Engineering, 195(41-43), 5472-5508.
Peer reviewed (verified by ORBi)
Stephany, A., Ponthot, J.-P., & Legrand, N. (2006). Numerical simulation in cold rolling using adiabatic strip model : application to large roll deformation. AUSTRIB 06.
Peer reviewed
Verly, J., Kavec, M., Vigneron, L. M., Phillips, C. L., Boman, R., Libertiaux, V., Ponthot, J.-P., Cescotto, S., Robe, P. A., Martin, D., Wikler, D., Levivier, M., & Brotchi, J. (2006). Problem and challenges of image-guided neurosurgical navigation and intervention. Paper presented at 21st International Symposium on Computer and Information Sciences (ISCIS), Istanbul, Turkey.
Peer reviewed
Vigneron, L. M., Boman, R., Robe, P. A., Warfield, S. K., & Verly, J. (2006). Preoperative Brain Image Update with FEM- and XFEM-based Biomedical Model. Paper presented at 7th World Congress on Computational Mechanics (WCCM6), Los Angeles, CA, USA.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2005). Simulation of complex impact problems with implicit time algorithms: Application to a turbo-engine blade loss problem. International Journal of Impact Engineering, 32(1-4), 358–386.
Peer reviewed (verified by ORBi)
Adam, L., & Ponthot, J.-P. (2005). Thermomechanical modeling of metals at finite strains: First and mixed order finite elements. International Journal of Solids and Structures, 42(21-22), 5615-5655.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2005). Prédiction numérique de l’angle de surformage en profilage à froid (4). ULg - Université de Liège.
Boman, R., Papeleux, L., Viet, B. Q., Ponthot, J.-P., Wouters, P., & Kergen, R. (2005). An ALE Model for Numerical Simulation of Cold Roll Forming Process. AIP Conference Proceedings, 778, 768-773.
Peer reviewed (verified by ORBi)
Boman, R. (2005, May). ALE simulations using Metafor. Paper presented at Laboratoire de Physique et Mécanique des Matériaux (LPMM).
Viet, B. Q., Papeleux, L., Boman, R., Ponthot, J.-P., Wouters, P., Kergen, R., & Daolio, G. (2005). Numerical Simulation of Cold Roll Forming Process. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 141-144). The Romanian Academy Publishing House Bucharest.
Peer reviewed
Chabrand, P., Dubois, F., Graillet, D., Boman, R., & Ponthot, J.-P. (2005). Numerical simulation of tribological devices used as a set of benchmarks for comparing contact algorithms. Finite Elements in Analysis and Design, 41(6), 637-665.
Peer reviewed (verified by ORBi)
Boman, R. (2005, February). Architecture de Metafor - code EF orienté objet. Paper presented at CODICIEL Scientific Meeting, Paris, France.
Noels, L., Stainier, L., & Ponthot, J.-P. (2005, February). Simulation of crashworthiness problems with implicit time integration methods for non-linear dynamics. Paper presented at Aero-Astro Department seminar, Cambridge, USA.
Adam, L., & Ponthot, J.-P. (2005). Heat generation due to friction and plastic dissipation – a coupled thermomechanical approach for impact and metal forming simulation. Proceedings of Int. Conf. on Computational Methods for Coupled Problems in Science and Engineering – COUPLED PROBLEMS 2005. Papadrakakis, Onate & Schrefler, Editors.
Fancello, E., Ponthot, J.-P., & Stainier, L. (2005). A variational framework for nonlinear viscoelastic models in finite deformation regime. Journal of Computational and Applied Mathematics, 215(2), 400-408.
Peer reviewed (verified by ORBi)
Fancello, E., Stainier, L., & Ponthot, J.-P. (2005). A variational formulation of constitutive models and updates in nonlinear finite viscoelasticity. 7ème Colloque National en calcul des Structures.
Peer reviewed
Jeunechamps, P.-P., Ponthot, J.-P., Bouvier, S., & Uenishi, A. (2005). Analyse numérique des tests expérimentaux à grande vitesse de déformation. 7ème Colloque National en calcul des Structures.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2005). Simulation of Complex Crashworthiness Problems by Using a Combined Implicit/Explicit Time Integration. Spain.
Ponthot, J.-P., Garcia-Garino, C., & Mirasso, A. (2005). Large strain elasto/viscoplastic constitutive model. Theory and numerical scheme. MECOM 2005, Mecanica Computational. Vol. XXIV.
Ponthot, J.-P., & Kleinermann, J.-P. (2005). Optimisation methods for initial/tool shape optimisation in metal forming processes. International Journal of Vehicle Design, 39(1-2), 14-24.
Peer reviewed (verified by ORBi)
Stainier, L., Fancello, E., & Ponthot, J.-P. (2005). A variational framework for nonlinear viscoelastic and viscoplastic models in finite deformation regime. MECOM 2005, , Mecanica Computational.
Stephany, A., & Ponthot, J.-P. (2005). Numerical simulation of mixed lubrication in cold rolling using an object-oriented philosophy. ACOMEN 2005.
Peer reviewed
Viet, B. Q., & Ponthot, J.-P. (2005). Finite element simulation of cold roll-forming processes. ACOMEN 2005.
Peer reviewed
Stephany, A., Ponthot, J.-P., Collette, C., & Schelings, J. (2004). Efficient algorithmic approach for mixed-lubrication in cold rolling. Journal of Materials Processing Technology, 153(1), 307-313.
Peer reviewed (verified by ORBi)
Viet, B. Q., Papeleux, L., & Ponthot, J.-P. (2004). Numerical simulation of springback using enhanced assumed strain elements. Journal of Materials Processing Technology, 153(1), 314-318.
Peer reviewed (verified by ORBi)
Boman, R., & Ponthot, J.-P. (2004). Finite Element Simulation of Lubricated Contact in Rolling using the Arbitrary Lagrangian-Eulerian Formulation. Computer Methods in Applied Mechanics and Engineering, 193(39-41), 4323-4353.
Peer reviewed (verified by ORBi)
Boman, R., Papeleux, L., & Ponthot, J.-P. (2004). Prédiction numérique de l’angle de surformage en profilage à froid (3). ULg - Université de Liège.
Noels, L., Stainier, L., & Ponthot, J.-P. (2004, July). Simulation of complex impact problems with implicit time algorithms: Application to a turbo - engine blade loss problem. Poster session presented at 5th International Symposium on Impact Engineering, Cambridge, United Kingdom.
Adam, L., & Ponthot, J.-P. (2004). Thermomechanical Modeling at finite strains : updated EAS and SRI finite element formalisms. Proceedings of PACAM VIII, eigth Pan American Congress of Applied Mechanics (pp. 165-168).
Adam, L., Rassili, A., & Ponthot, J.-P. (2004). The influence of the evolution of the strain rate sensitivity on superplastic forming processes. Paper presented at Proceedings of the International Conference on Semi Solid Processing of Alloys and Composites, Cyprus.
Celentano, D., Garcia Garino, C., Flores, F., & Ponthot, J.-P. (2004). Modeling and experimental validation of an industrial sheet metal forming process. Computational Mechanics, WCCM VI. Z. Yao, M. Yan & W. Zhong, Editors.
Donea, J., Huerta, A., Ponthot, J.-P., & Rodriguez--Ferran, A. (2004). Arbitrary Lagrangian Eulerian methods. Encyclopedia of Computational Mechanics (pp. 14, Vol. 1). E. Stein, R. de Borst and T.J.R. Hughes, Wiley & sons.
Jeunechamps, P.-P., Ponthot, J.-P., & Bouvier, S. (2004). Analyse numérique des tests expérimentaux à grande vitesse de déformation sur des aciers dual phase. Colloque national MECAMAT 2005.
Peer reviewed
Jeunechamps, P.-P., Walmag, J., Duysinx, P., Delhez, E., Tossings, P., Habraken, A., & Ponthot, J.-P. (2004). A trust region algorithm for automatic identification of elasto-viscoplastic model parameters in metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 2004.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit algorithms for crashworthiness analysis. International Journal of Impact Engineering, 30(8-9, SEP-OCT), 1161-1177.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Combined implicit/explicit time-integration algorithms for the numerical simulation of sheet metal forming. Journal of Computational and Applied Mathematics, 168(1-2, Sp. Iss. SI), 331-339.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). A Consistent Dissipative Time Integration Scheme for Structural Dynamics. Application to Rotordynamics. USA: American Institute of Aeronautics and Astronautics.
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). An energy-momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal for Numerical Methods in Engineering, 59(1), 83-114.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). On the use of large time steps with an energy momentum conserving algorithm for non-linear hypoelastic constitutive models. International Journal of Solids and Structures, 41(3-4), 663–693.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2004). Simulation of complex impact problems with implicit time algorithms. Application to crashworthiness problems. Matériaux et Techniques, 15-19.
Peer reviewed
Ponthot, J.-P., & Adam, L. (2004). Thermo-elasto-plastic modeling of the behaviour of metals submitted to finite strains. A coupled thermo-mechanical approach. Proceedings of ENIEF 2004, XIV Congress on numerical methods and their applications.
Peer reviewed
Stainier, L., Viet, B. Q., & Ponthot, J.-P. (2004). Modeling the elastic-plastic behavior of a rotor support structure under a large unbalance: numerical simulations. Proceedings of ISMA 2004, International Conference on Noise & Vibration Engineering.
Stephany, A., & Ponthot, J.-P. (2004). Improvements of an iterative and staggered Approach for a Model of Mixed Lubrication in Cold Rolling. Proceedings of NUMIFORM 2004, The 8th International Conference on Numerical Methods in Industrial Forming Processes: Materials processing and design. Modeling, Simulation and Applications (pp. 406-411). S. Ghosh, J.M. Castro and J.K. Lee.
Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Advances in the time integration of Dynamical Systems. Applications to Crashworthiness problems. Proceedings of the International Crashworthiness and Design Symposium 2003.
Boman, R. (2003, November). Compléments de C++. Paper presented at ULg - Université de Liège.
Boman, R., Papeleux, L., & Ponthot, J.-P. (2003). Prédiction numérique de l’angle de surformage en profilage à froid (2). ULg - Université de Liège.
Adam, L., & Ponthot, J.-P. (2003). A coupled thermo-viscoplastic formulation at finite strains for the numerical simulation of superplastic forming. Journal of Materials Processing Technology, 139, 514-520.
Peer reviewed (verified by ORBi)
Kleinermann, J.-P., & Ponthot, J.-P. (2003). Parameter identification and shape/process optimization in metal forming simulation. Journal of Materials Processing Technology, 139(1-3), 521-526.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2003). A new formulation of internal forces for non-linear hypoelastic constitutive models verifying conservation laws. In K. J., Bathe (Ed.), Computational Fluid and Solid Mechanics 2003 (pp. 527-531). Elsevier.
Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C., Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.
Peer reviewed
Kleinermann, J.-P., Ponthot, J.-P., & Stainier, L. (2003). Optimization of sheet metal forming processes using inverse problems methodology. Proceedings of COMPLAS 2003, VII International Conference on Computational Plasticity. Fundamentals and Applications.
Viet, B. Q., Papeleux, L., & Ponthot, J.-P. (2003). Efficient springback prediction based on Enhanced Assumed Strain Elements. Proceedings of COMPLAS 2003, VII International Conference on Computational Plasticity. Fundamentals and Applications.
Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Combined implicit/explicit time integration algorithms for crashworthiness analysis and metal forming simulation. Proceedings of IMPLAST'2003, 8th International Symposium on Plasticity and Impact Mechanics (pp. 986-993). NK. Gupta, Ed.
Verly, J., Vigneron, L., Petitjean, N., Martin, C., Guran, R., Boman, R., & Robe, P. (2003). Human-Visual-System-Based Fusion of Multimodality 3D Neuroimagery using Brain-Shift-Compensating Finite-Element-Based Deformable Models. Proceedings of SPIE: The International Society for Optical Engineering, 5029, 338-349.
Peer reviewed (verified by ORBi)
Boman, R. (2003, January). Simulation of metal forming processes : Numerical aspects of contact and friction. Paper presented at LaCaN, Barcelona, Spain.
Adam, L., & Ponthot, J.-P. (2003). Heat generation and transfer due to friction and plastic dissipation - a coupled thermomechanical approach. Proceedings of HEFAT 2003, 2nd International conference on Heat Transfer, Fluid Mechanics and Thermodynamics.
Garcia-Herrera, C. M., Celentano J., D., & Ponthot, J.-P. (2003). Caracterization del comportamiento mecanico de aceros para embuticion profunda. Proceedings of the joint conference Jornadas SAM, el Congreso Nacional de Metalurgia y Materiales de Chile.
Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.
Peer reviewed
Kleinermann, J.-P., Ponthot, J.-P., & Hogge, M. (2003). Parameter identification for inverse problems in metal forming simulation. Proceedings of FIELD ANALYSIS FOR DETERMINATION OF MATERIAL PARAMETERS. EXPERIMENTAL AND NUMERICAL ASPECTS (pp. 81-99). P. Stahle & K.G. Sundin, Eds.
Noels, L., Stainier, L., & Ponthot, J.-P. (2003). Un nouveau schéma d'intégration conservatif pour des modèles constitutifs hypoélastiques irréversibles. In M., Potier-Ferry, M., Bonnet, & A., Bignonnet (Eds.), Actes du Sixième Colloque National en Calcul des Structures (pp. 85-92). Francs.
Peer reviewed
Stainier, L., Kleinermann, J.-P., & Ponthot, J.-P. (2003). Optimization methods for parameter identification of constitutive models in finite viscoplasticity and damage. Proceedings of PLASTICITY 2003 (pp. 558-560).
Stephany, A., Ponthot, J.-P., Collette, C., & Gratacos, P. (2003). Nouveau concept algorithmique pour un modèle de laminage à froid en régime mixte. Proceedings of the 6ème colloque national en calcul des structures (pp. 157-164).
Peer reviewed
Stephany, A., Ponthot, J.-P., Collette, C., & SCHELINGS, J. (2003). Efficient algorithmic approach for mixed lubrication in cold rolling. Proceedings of AMPT 2003, Advances in Materials and Processing Technologies (pp. 1085-1088).
Stephany, A., Ponthot, J.-P., Collette, C., & Schellings, J. (2003). New algorithm concept for a model of mixed lubrication in cold rolling. Proceedings of METEC 2003, European Rolling Conference (pp. 411-416).
Peer reviewed
Viet, B. Q., Papeleux, L., & Ponthot, J.-P. (2003). Numerical simulation of Springback using enhanced assumed strain elements. Proceedings of AMPT 2003, Advances in Materials and Processing Technologies (pp. 623-626).
Adam, L., & Ponthot, J.-P. (2002). Numerical simulation of viscoplastic and frictional heating during finite deformation of metal. Part I: Theory. Journal of Engineering Mechanics, 128(11), 1215-1221.
Peer reviewed (verified by ORBi)
Adam, L., & Ponthot, J.-P. (2002). Numerical Simulation of Viscoplastic and Frictional Heating during Finite Deformation of Metal. Part II: Applications. Journal of Engineering Mechanics, Vol. 128, 1222-1232.
Peer reviewed (verified by ORBi)
Viet, B. Q., Nguyen, H. G., Papeleux, L., & Ponthot, J.-P. (2002). Simulation of Springback with Enhanced Assumed Strain Elements. Proceedings of NUMISHEET 2002 (pp. 31-36).
Boman, R., & Ponthot, J.-P. (2002). Numerical Simulation of Lubricated Contact in Rolling Processes. Journal of Materials Processing Technology, 125-126, 405-411.
Peer reviewed (verified by ORBi)
Papeleux, L., & Ponthot, J.-P. (2002). Finite element simulation of springback in sheet metal forming. Journal of Materials Processing Technology, 125(Sp. Iss. SI), 785-791.
Peer reviewed (verified by ORBi)
Boman, R., Papeleux, L., & Ponthot, J.-P. (2002). Prédiction numérique de l’angle de surformage en profilage à froid (1). ULg - Université de Liège.
Hogge, M., Ponthot, J.-P., Stainier, L., DE SCHEPPER, H., VAN KEER, R., & NOLDUS, E. (Eds.). (2002). Actes du Congrès ACOMEN 2002, Second international Conference on Advanced Computational Methods in Engineering, Liège, Belgium, May 28-31, 2002.
Papeleux, L., & Ponthot, J.-P. (2002). Springback Prediction in Sheet Metal Forming. Proceedings of ACOMEN 2002 (pp. 10).
Bui, Q. V., & Ponthot, J.-P. (2002). Estimation of rubber sliding friction from asperity interaction modeling. Wear, 252(1-2), 150-160.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Combined Implicit/Explicit Time Integration Algorithms for the Numerical Simulation of Sheet Metal Forming. Proceedings of ACOMEN 2002.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2002). Self-adapting time integration management in crash-worthiness and sheet metal forming computations. International Journal of Vehicle Design, 30(1-2), 67-114.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Automatic time stepping algorithms for implicit numerical simulations of non-linear dynamics. Advances in Engineering Software, 33(7-10, JUL-OCT), 589-603.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Combined implicit-explicit algorithms for non-linear structural dynamics. Revue Européenne des Éléments Finis, 11(5), 565-591.
Peer reviewed
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Détermination automatique de la taille du pas de temps pour les schémas implicites en dynamique non-linéaire. Mécanique and Industries, 3(1), 63-77.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2002). Implicit-explicit time integration algorithms for the numerical simulation of blade-casing interactions. In A. M., Rajendran, B. N., Jones (Ed.), & C. A., Brebbia (Ed.), Structures under Shock and Impact VII (pp. 179-188). WIT Press.
Ponthot, J.-P. (2002). Unified stress update algorithms for the numerical simulation of large deformation elasto-plastic and elasto-viscoplastic processes. International Journal of Plasticity, 18(1), 91-126.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., & Adam, L. (2002). Numerical simulation of cavitation and grain growth during superplastic forming. Proceedings of Plasticity, damage and Fracture at Macro, Micro and Nano Scales (pp. 735-737). Aruba, A.S. Khan and O. Lopez-Pamies, Eds., Neat-Press.
Boman, R., & Ponthot, J.-P. (2001). Numerical Simulation of Lubricated Contact between Solids in Metal Forming Processes using the Arbitrary Lagrangian Eulerian Formulation. Simulation of Material Processing: Theory, Methods and Application: Proceedings of the 7th International Conference NUMIFORM 2001 (pp. 45-53). Taylor & Francis.
Peer reviewed
Kleinermann, J.-P., & Ponthot, J.-P. (2001, June). Optimization Methods for Inverse Problems in Metal Forming Simulation. STEELS-Mechanical Technology, 27-29.
Peer reviewed
Adam, L., & Ponthot, J.-P. (2001). A coupled formulation for Thermo-Viscoplasticity at Finite Strains: Application to Hot Metal Forming. fifth IUTAM Symposium on Creep in Structures (pp. 197-206). S. Murakami and N. Ohno, Editors.
Peer reviewed
Adam, L., & Ponthot, J.-P. (2001). A coupled Thermo-Viscoplastic Formulation at Finite Strains for the Numerical Simulation of Superplastic Forming. Proceedings of ICSAM 2000 (pp. 295-300). N. Chandra, Ed.
Peer reviewed
Adam, L., & Ponthot, J.-P. (2001). A coupled thermo-viscoplastic formulation at finite strains for the numerical simulation of superplastic forming. Materials Science Forum, 357-359, 295-300.
Peer reviewed
Graillet, D., Ponthot, J.-P., & Stainier, L. (2001). Augmented Lagrangian procedure for implicit computation of contact-impact between deformable bodies. International Journal of Crashworthiness, 6(2), 209-221.
Peer reviewed (verified by ORBi)
Noels, L., Stainier, L., & Ponthot, J.-P. (2001). Self-adapting time integration strategies for non-linear structural dynamics. Elsevier.
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2001). Automatic time stepping algorithms for implicit numerical simulations of blade/casing interactions. International Journal of Crashworthiness, 6(3), 351-362.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., & Kleinermann, J.-P. (2001). Optimization methods for inverse modeling of forming processes. In A., Habraken (Ed.), Proceedings of the Fourth International ESAFORM Conference on Material Forming (pp. 387-390).
Boman, R., & Ponthot, J.-P. (2000). ALE Methods for Determining Stationary Solutions Metal Forming Processes. In E., Oñate, G., Bugeda, & B., Suárez (Eds.), Proceedings of ECCOMAS 2000/COMPLAS VI, European Congress on Computational Methods in Applied Sciences and Engineering.
Peer reviewed
Boman, R., & Ponthot, J.-P. (2000). Arbitrary Lagrangian Eulerian Method for the Simulation of Lubricated Contact between Solids in Metal Forming Processes. In M., Pietryk, J., Kusiak, J., Majta, P., Hartley, & I., Pillinger (Eds.), Metal Forming 2000 (pp. 57-62). Rotterdam, The Netherlands: Balkema.
Peer reviewed
Boman, R. (2000). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme (3ème année FRIA). ULg - Université de Liège.
Boman, R., & Ponthot, J.-P. (2000). ALE Update Procedures for Stationary Solutions of Metal Forming Processes. Proceedings of the 5th National Belgian Congress on Theoretical and Applied Mechanics (pp. 195-197).
Boman, R., & Ponthot, J.-P. (2000). Finite Elements for the Lubricated Contact Between Solids in Metal Forming Processes. Acta Metallurgica Sinica, 13(1), 319-327.
Peer reviewed (verified by ORBi)
Boman, R. (2000). Eléments Finis de Lubrification pour la Prise en Compte du Frottement dans la Simulation de Processus de Formage des Matériaux. In P., Chabrand, M., Jean, & M., Raous (Eds.), Colloque National Mécamat 2000.
Adam, L., & Ponthot, J.-P. (2000). A coupled formulation for Thermo-Viscoplasticity at Finite Strains: Application to Hot Metal Forming. Proceedings of the Fifth National Belgian Congress on Theoretical and Applied Mechanics (pp. 115-118).
Collette, C., Counhaye, C., & Ponthot, J.-P. (2000). Intégration du transfert de rugosité à un modèle de laminage à froid. Revue de Métallurgie, 961-969.
Peer reviewed
Gohy, S., Papeleux, L., Collard, X., & Ponthot, J.-P. (2000). Accurate prediction of Springback in Sheet Metal Forming. Proceedings of the 8th International Conference METAL FORMING 2000 (pp. 411-418). Pietrzyk et al. Eds.
Gohy, S., Papeleux, L., Collard, X., & Ponthot, J.-P. (2000). FEM Simulation of Springback in Sheet Metal Forming. proceedings of Plasticity’2000 (pp. 225-227). A.S. Khan Editor.
Graillet, D., Ponthot, J.-P., & Stainier, L. (2000). Augmented Lagrangian procedures for implicit computation of contact-impact between deformable bodies. Proceedings of IJCRASH 2000 (pp. 422-434). London, United Kingdom: Chirwa & Otte Eds.
Peer reviewed
Graillet, D., Stainier, L., & Ponthot, J.-P. (2000). Efficient implicit schemes for the treatment of the contact between deformable bodies. Application to shock absorber devices. Proceedings of the Fifth National Belgian Congress on Theoretical and Applied Mechanics (pp. 307-310).
Kleinermann, J.-P., & Ponthot, J.-P. (2000). Optimization Methods for Inverse Problems in Metal Forming Simulation. Proceedings of SACAM 2000, International Conference on Applied Mechanics (pp. 685-690). Adali, Morozov & Verijenko.
Kleinermann, J.-P., Ponthot, J.-P., & Stainier, L. (2000). Damage Model Identification Using Inverse Problem Methodology. proceedings of Plasticity’2000 (pp. 413-415). A.S. Khan Editor.
Kleinermann, J.-P., Stainier, L., & Ponthot, J.-P. (2000). Metal Forming Processes Optimization Using Inverse Problems. Proceedings of ECCOMAS 2000/COMPLAS VI, European Congress on Computational Methods in Applied Sciences and Engineering (pp. 11).
Kleinermann, J.-P., Stainier, L., & Ponthot, J.-P. (2000). Metal Forming Processes Optimization Using Inverse Problems. Proceedings of the Fifth National Belgian Congress on Theoretical and Applied Mechanics (pp. 247-250).
Peer reviewed
Kleinermann, J.-P., Stainier, L., & Ponthot, J.-P. (2000). Parameter Identification Using Inverse Problems Methodology in Metal Forming Simulation. Proc. of the Second International Conference on Engineering Computational Technology “Finite Element Techniques and development (pp. 279-284). B.H.V. Topping.
Peer reviewed
Noels, L., Stainier, L., & Ponthot, J.-P. (2000). Automatic time step size determination and automatic Hessian matrix actualisation selection for non-linear dynamic problems solved by implicit schemes.
Noels, L., Stainier, L., Ponthot, J.-P., & Bonini, J. (2000). Automatic time stepping algorithms for implicit numerical simulations of non-linear dynamics. In B. H. V., Topping & C. A., Motas Soares (Eds.), FINITE ELEMENTS: TECHNIQUES AND DEVELOPMENTS (pp. 263-272). Civil Comp Press.
Papeleux, L., Gohy, S., Collard, X., & Ponthot, J.-P. (2000). Numerical Simulation of Springback in Sheet Metal Forming Using Shell Elements. Proceedings of the Fifth National Belgian Congress on Theoretical and Applied Mechanics (pp. 251-254).
Papeleux, L., Ponthot, J.-P., Gohy, S., & Collard, X. (2000). Numerical Simulation of Springback in Sheet Metal Forming Using Linear Shell Elements. Proceedings of IASS-IACM 2000, Fourth International Colloquium on Computation of Shell and Spatial Structure (pp. 18). M. Papadrakis, A. Samartin & E. Onate, Eds.
Ponthot, J.-P., Papeleux, L., Gohy, S., & Collard, X. (2000). Numerical Simulation of Springback in Sheet Metal Forming. Proceedings of ECCOMAS 2000/COMPLAS VI, European Congress on Computational Methods in Applied Sciences and Engineering (pp. 20).
Peer reviewed
Garcìa Garino, C., Ponthot, J.-P., Boman, R., & Oliver, J. (1999). A Quasi-Coulomb Model for Frictional Contact Interfaces. MECOM'99 - Proceedings of the 6th Argentine Congress on Computational Mechanics.
Peer reviewed
Boman, R. (1999). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme (2ème année FRIA). ULg - Université de Liège.
Boman, R., & Ponthot, J.-P. (1999). Numerical Methods for the Lubricated Contact Between Solids in Metal Forming Processes. ECCM’99, European Conference on Computational Mechanics.
Peer reviewed
Garcìa Garino, C., Ponthot, J.-P., Boman, R., & Oliver, J. (1999). A Symmetric Tangent Operator Recovery via Quasi-Coulomb Model for Frictional Contact Between Solids in Large Deformation Analysis. ECCM’99, European Conference on Computational Mechanics.
Peer reviewed
Ponthot, J.-P., & Graillet, D. (1999). Numerical simulation of shock-absorber devices for crashworthiness : explicit vs implicit formulation. 32nd ISATA, International Symposium on Automotive Technology and Automation, special session on Automotive Crashworthiness, paper 99 SF004 (pp. 277-284).
Boman, R., & Ponthot, J.-P. (1999). ALE Methods for Stationary Solutions of Metal Forming Processes. In J. A., Covas (Ed.), Proceedings of the Second ESAFORM Conference on Material Forming (pp. 585-588).
Peer reviewed
Ponthot, J.-P. (1999). Unified lubricated and dry friction modeling by an extension of the radial return scheme. Seventh International Symposium on Plasticity and its current applications: special session on « Computational Modeling of Frictional Contact Processes (pp. 401-404).
Collette, C., Counhaye, C., & Ponthot, J.-P. (1999). Intégration du transfert de rugosité à un modèle de laminage à froid. Journées Sidérurgiques Internationales ATS.
Peer reviewed
Gohy, S., Papeleux, L., Collard, X., & Ponthot, J.-P. (1999). An extension of the Radial Return Scheme for Springback Similation in Sheet Metal Forming. 6th ICTP-International Conference on Technology of Plasticity, Nuremberg (pp. 2045-2050).
Graillet, D., & Ponthot, J.-P. (1999). Numerical simulation of crashworthiness with an implicit finite element code. Aircraft Engineering, 71(1), 12-20.
Peer reviewed (verified by ORBi)
Kleinemann, J.-P., & Ponthot, J.-P. (1999). Optimization Methods for Inverse Problems in Large Strain Plasticity. 1st CanCNSM – Canadian Conference on Nonlinear Solid Mechanics (pp. 244-253).
Papeleux, L., Gohy, S., Collard, X., & Ponthot, J.-P. (1999). Springback simulation in sheet metal forming using implicit algorithms. NUMISHEET’99, the Fourth International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (pp. 23-28).
Ponthot, J.-P., & Belytschko, T. (1999). Element-Free Galerkin Method for Crack Propagation. Paper presented at ECCM’99, European Conference on Computational Mechanics, München, Germany.
Ponthot, J.-P., & Graillet, D. (1999). Efficient Implicit Schemes for Finite Element Impact Simulation. International Journal of Crashworthiness, 4(3), 273-285.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., Papeleux, L., & Gohy, S. (1999). A unified radial return scheme for visco-plasticity and mixed hardening. Seventh International Symposium on Plasticity and its current applications (pp. 405-408).
Kleinermann, J.-P., Ponthot, J.-P., & Hogge, M. (1998). Optimization techniques for parameter identification of material constitutive laws in large deformation processes. Journées Samtech.
Peer reviewed
Boman, R., Colantonio, L., & Ponthot, J.-P. (1998). Effective Iterative Solvers for Highly Non-Linear & Large Deformation Pressure Dependent Problems. In R., Van Keer, B., Verhegghe, M., Hogge, & E., Noldus (Eds.), Proceedings of ACOMEN'98, Advanced Computational Methods in Engineering, part 2: Contributed papers (pp. 133-140). Maastricht, The Netherlands: Shaker Publishing.
Hogge, M., Graillet, D., & Ponthot, J.-P. (1998). Efficient Implicit Schemes for High-Speed Dynamics and Crash Simulation. Application to shock-absorber devices. Proceedings of «ACOMEN’98», Advanced Computational Methods in Engineering: Invited Papers (pp. 51-63). R. Van Keer, B. Verhegghe, M. Hogge & E. Noldus.
Boman, R. (1998). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme (1ère année FRIA). ULg - Université de Liège.
Boman, R., Colantonio, L., & Ponthot, J.-P. (1998). Iterative Solvers for Large Pressure Dependent Problems. In J., Huétink & F. P. T., Baaijens (Eds.), Proceedings of the Sixth International Conference on Numerical Methods in Industrial Forming Processes (pp. 225-231).
Peer reviewed
Chabrand, P., Dubois, F., Graillet, D., & Ponthot, J.-P. (1998). Numerical Modeling of Tribological Devices Using Various Contact Algorithms. Proceedings of “NUMIFORM’98, Simulation of Materials Processing: Theory, Methods and Applications (pp. 839-844). Huetink & Baaijen.
Graillet, D., & Ponthot, J.-P. (1998). An Efficient Implicit Scheme for the Treatment of Contact between Deformable Bodies. Proceedings of "NUMIFORM'98, Simulation of Materials Processing: Theory, Methods and Applications (pp. 181-186). Huetink & Baaijen.
Kleinermann, J.-P., & Ponthot, J.-P. (1998). Parameter Identification of Material Models using the "GCMMA" method. Proceedings of "NUMIFORM'98, Simulation of Materials Processing: Theory, Methods and Applications (pp. 149-155). Huetink & Baaijen.
Ponthot, J.-P., & Belytschko, T. (1998). A Combined for Element-Free Galerkin Method/Arbitrary Lagrangian Eulerian Formulation for Dynamic Crack Propagation. In D., Durban & J. R. A., Pearson (Eds.), Proceedings of the "IUTAM Symposium on Non-Linear Singularities in Deformation and Flow (pp. 205-217). Kluwer Academic Publishers.
Chabrand, P., Dubois, F., Graillet, D., & Ponthot, J.-P. (1998). Contact Algorithms for Numerical Modeling of Tribological Devices. Proceedings of "First ESAFORM Conference on Material Forming (pp. 511-514).
Peer reviewed
Garcìa Garino, C., Ponthot, J.-P., & Olivier, J. (1998). A Quasi-Coulomb Model for Frictional Contact Interfaces. In S., Idelsohn, Onate, & Dvorkin (Eds.), Proceedings of "World Congress on Computational Mechanics IV (pp. 22).
Peer reviewed
Graillet, D., & Ponthot, J.-P. (1998). An Efficient Implicit Scheme for the Treatment of Frictional Contact between Deformable Bodies. Proceedings of "First ESAFORM Conference on Material Forming" (pp. 283-286).
Peer reviewed
Ponthot, J.-P. (1998). An extension of the radial return algorithm to account for rate-dependent effects in frictional contact and visco-plasticity. Journal of Materials Processing Technology, 80-1, 628-634.
Peer reviewed (verified by ORBi)
Ponthot, J.-P. (1998). An Extension of the Radial Return Algorithm to Account for Visco- Plasticity and Rate-Dependent Effects in Frictional Contac. Proceedings of "World Congress on Computational Mechanics IV" (pp. 18).
Peer reviewed
Ponthot, J.-P. (1998). Radial Return Extension for the Numerical Simulation of Viscoplastic Processes. Proceedings of “NUMIFORM'98, Simulation of Materials Processing: Theory, Methods and Applications (pp. 271-276). Huetink & Baaijen.
Peer reviewed
Ponthot, J.-P. (1998). A Unified Radial Return Scheme for Visco-PLasticity and Lubricated Friction. Proceedings of "First ESAFORM Conference on Material Forming (pp. 279-282).
Ponthot, J.-P., & Belytschko, T. (1998). Arbitrary Lagrangian-Eulerian formulation for element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering, 152, 19-46.
Peer reviewed (verified by ORBi)
Ponthot, J.-P., & Graillet, D. (1998). An Efficient Implicit Scheme for the Treatment of Contact Between Deformable Bodies. In S., Idelsohn, Onate, & Dvorkin (Eds.), Proceedings of "World Congress on Computational Mechanics IV (pp. 19).
Peer reviewed
Boman, R. (1997). Méthodes itératives pour la résolution de grands systèmes non linéaires. Unpublished master thesis, ULg - Université de Liège.
Ponthot, J.-P., & Belytschko, T. (1997). Arbitrary Lagrangian Eulerian Formulation for Element-Free Galerkin Method. 4th National Congress on Theoretical & Applied Mechanics (pp. 123-126).
Peer reviewed
Hogge, M., & Ponthot, J.-P. (1996). Efficient Implicit Schemes for Transient Problems in Metal Forming Simulation. Proc. of NUPHYMAT'96, Numerical and Physical Study of Material Forming Processe.
Ponthot, J.-P. (1995). Advances in Arbitrary Eulerian-Lagrangian Finite Element Simulation of Large Deformation Process. fourth International Conference on Computational Plasticity (pp. 2361-2372).
Peer reviewed
Ponthot, J.-P. (1995). Radial Return Extensions for Visco-Plasticity and Lubricated Friction. In M. M., Rocha & J. D., Riera (Eds.), SMIRT-13 International Conference on Structural Mechanics and Reactor Technology (pp. 711-722).
Peer reviewed
Ponthot, J.-P. (1995). Traitement unifié de la Mécanique des Milieux Continus Solides en Grandes Transformations par la Méthode des Eléments Finis. Unpublished doctoral thesis, Collection des publications de la faculté des Sciences Appliquées N° 159 Université de Liège.
Bittencourt, E., Creus, G., Ponthot, J.-P., & Hogge, M. (1994). Tratamento do problema de contato e atrito tridimensional pelo método dos elementos finitos. In S., Idelsohn & V., Sonzogni, Proc. of Mécanica Computational (pp. 615-624).
Peer reviewed
Ponthot, J.-P. (1994). Sur les mérites relatifs des schémas explicites et implicites pour l'intégration temporelle des problèmes transitoires en grandes déformations. Actes du 3° Colloque National Belge de Mécanique Théorique et Appliquée (pp. 318-322).
Ponthot, J.-P., & Hogge, M. (1994). On relative merits of Implicit/Explicit Algorithms for Transient Problems in Metal Forming Simulation. Proc. of the Int. Conf. on Numerical Methods for Metal Forming in Industry (pp. 128-148).
Stainier, L., & Ponthot, J.-P. (1994). AN IMPROVED ONE-POINT INTEGRATION METHOD FOR LARGE-STRAIN ELASTOPLASTIC ANALYSIS. Computer Methods in Applied Mechanics and Engineering, 118(1-2), 163-177.
Peer reviewed (verified by ORBi)
Hogge, M., Ponthot, J.-P., & Quoirin, D. (1993). METAFOR logiciel eulérien-lagrangien pour l'analyse non-linéaire, la mise à forme et les grandes déformations des matériaux. Actes des Journées SAMCEF'93 (pp. 10).
Hogge, M., Ponthot, J.-P., Quoirin, D., Rozenvald, D., & Stainier, L. (1992). Apports d'une formulation eulérienne-lagrangienne pour la simulation des opérations de mise en forme des matériaux. Actes du Congrès STRUCOME'92 (pp. 301-312).
Ponthot, J.-P. (1992). The Use of the Eulerian-Lagrangian FEM with Adaptive Mesh. Applications to Metal Forming Simulation. Proceedings of Complas III, Computational Plasticity. Fundamentals and Applications (pp. 2269- 2282).
Peer reviewed
Ponthot, J.-P. (1992). The Use of the Eulerian-Lagrangian Formulation Including Contact. Applications to Forming Simulation via FEM. Proceedings of NUMIFORM'92, Numerical. Methods. in Industrial Forming Processes.
Peer reviewed
Hogge, M., & Ponthot, J.-P. (1991). Metal Forming Analysis via Eulerian-Lagrangian FEM with Adaptive Mesh. Latin American Research Review, 21, 217-224.
Peer reviewed (verified by ORBi)
Hogge, M., Ponthot, J.-P., & Quoirin, D. (1991). METAFOR : Logiciel Eulérien-lagrangien pour l'analyse de la mise à forme et des grandes déformations de matériaux. Proceedings of "New Advances in Computational Structural Mechanics (pp. 657-664).
Peer reviewed
Ponthot, J.-P. (1991). Eulerian-Lagrangian Treatment of Contact Problems. Application to Metal Forming Simulation via FEM. Proceedings of "New Advances in Computational Structural Mechanics (pp. 445-452).
Peer reviewed
Ponthot, J.-P., & Hogge, M. (1991). The Use of the Eulerian-Lagrangian FEM in Metal Forming Applications Including Contact and Adaptive Mesh. ASME Symposium on "Advances in Finite Deformation Problems in Material Processing and Structures", Winter Annual Meeting (pp. 44-64). Atlanta, USA: Chandra et al.
Peer reviewed
Ponthot, J.-P. (1990). Metal-Forming Simulation via Eulerian-Lagrangian FEM with Contact Problems. Proc. of NUMETA'90, Numerical Meth. in Engineering: Theory & Applications (pp. 329-338).
Peer reviewed
Ponthot, J.-P. (1990). Treatment of Contact Problems in Metal Forming Simulation via Eulerian- Lagrangian FEM. Actes du 2° Colloque Belge de Mécanique Théorique et Appliquée (pp. 272-275).
Peer reviewed
Ponthot, J.-P., & Hogge, M. (1990). A novel Treatment of Transition Problems in Metal Forming Simulation via Eulerian-Lagrangian Finite Element Modeling. Proc. of the Second World Congress on Computational Mechanics (pp. 826-829).
Peer reviewed
Ponthot, J.-P., & Mincke, J. C. (1990). Mesh Updating in Eulerian-Lagrangian FEM for Large Deformation Analysis. Actes du 2° Colloque Belge de Mécanique Théorique et Appliquée (pp. 264-267).
Peer reviewed
Ponthot, J.-P. (1989). Efficient mesh management in Eulerian-Lagrangian formulation. Proceedings of NUMIFORM'89, Numerical Methods in Industrial Forming Processes (pp. 203-210).
Peer reviewed
Lilien, J.-L., & Ponthot, J.-P. (1988). Overhead lines galloping - Modelisation. Modeling and Simulation of Electrical Machines and Power Systems. In D. K., TRAN & J., Robert (Eds.), IMACS (pp. 103-110). North-Holland: Elsevier Science Publishers B.V.
Peer reviewed
Ponthot, J.-P. (1988). A Method to Reduce Cost of Mesh Deformation in Eulerian-Lagrangian Formulation. Proceedings of EUROMECH 233: "Modeling of Metal Forming Processes (pp. 65-74). France.
Peer reviewed
Lilien, J.-L., & Ponthot, J.-P. (1987). Modelling the Phenomenon of Galloping in Overhead Lines. Revue de la Société Royale Belge des Electriciens, 103(12), 5-19.
Peer reviewed