rolling; lubrication; large deformation; finite elements; ALE formulation
Abstract :
[en] In this paper, the lubrication problem in numerical simulation of forming processes is considered. Two efficient convection algorithms are presented in order to update the value stored at the Gauss points during the Eulerian step of an arbitrary Lagrangian Eulerian computation in solid mechanics. They are based on the finite volume method and on the streamline upwind Petrov Galerkin method. After enumerating the difficulties encountered when trying to solve the lubrication problem with the finite element method, a generalization of the formulation introduced by Liu [Simulation of Ring Rolling Process by Arbitrary Lagrangian Eulerian Finite Element Method, vol. 20, p. 225; ASME Winter Meeting, Dallas, Tx, 1990, Int. J. Numer. Methods Engrg. 36 (1993) 855; Numerical Methods in Industrial Forming Processes, Valbonne, France, 1992, p. 731] for the thin film hydrodynamic lubrication regime is presented. This method is then applied to a strip rolling simulation, using the arbitrary Lagrangian Eulerian formalism. (C) 2004 Elsevier B.V. All rights reserved.
R. Akkerman, Euler-Lagrange simulations of non isothermal viscoelastic flows, PhD thesis, University of Twente, Enschede, The Netherlands, 1993
R. Akkerman, J. Huètink, P.N. van der Helm. Finite elements and volumes in a Euler Lagrange formulation--artificial dissipation versus limited flux schemes, in: E. Oñate, D.R.J. Owen, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1995, pp. 2307-2318
Al-Salehi F.A.R. Firbank T.C. Lancaster P.R. An experimental determination of the roll pressure distributions in cold rolling Int. J. Mech. Sci. 15 1973 693-710
Argyris J. Doltsinis J.-St. Fisher H. Wurstenberg H. TA π ANTA PEI Comput. Meth. Appl. Mech. Engrg. 51 1985 289-362
Baaijens F.P.T. An U-ALE formulation for 3-D unsteady viscoelastic flow Int. J. Numer. Meth. Engrg. 36 1993 1115-1143
Belytschko T. Flanagan D.P. Kennedy J.M. Finite element methods with user-controlled meshes for fluid-structure interaction Comput. Meth. Appl. Mech. Engrg. 33 1982 669-688
Belytschko T. Kennedy J.M. Computer models for subassembly simulation Nucl. Engrg. Des. 49 1 1978 17-38
Belytschko T. Kennedy J.M. Schoeberle D.F. Quasi-Eulerian finite element formulation for fluid-structure interaction J. Pressure Vessel Technol. 102 February 1980 62-69
Benson D.J. An efficient, accurate, simple ALE method for nonlinear finite element programs Comput. Meth. Appl. Mech. Engrg. 72 1989 305-350
Benson D.J. Computational methods in Lagrangian and Eulerian hydrocodes Comput. Meth. Appl. Mech. Engrg. 99 1992 235-394
Benson D.J. Momentum advection on a staggered mesh J. Comput. Phys. 100 1992 143-162
Bhushan B. Introduction to Tribology 2002 John Wiley and sons
R. Boman, Formalisme Eulérien Lagrangien pour le contact lubrifié entre solides (rapport d'activité FRIA--in French), Technical Report TF-55, Université de Liège, Belgium, 1998
Brooks A.N. Hughes T.J.R. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations Comput. Meth. Appl. Mech. Engrg. 32 1982 199-259
F. Casadei, J. Donea, A. Huerta, Arbitrary Lagrangian Eulerian finite elements in non-linear fast transient continuum mechanics, Technical Report EUR 16327 EN, University of Catalunya, Barcelona, Spain, 1995
Cescutti J.P. Wey E. Chenot J.L. Finite element calculation of hot forging with continuous remeshing Chenot J.L. Oñate E. Modelling of Metal Forming Processes, EUROMECH-233 1988 207-216 Sophia-Antipolis France
Chorin A. Hughes T.J.R. McCracken M.F. Marsden J.E. Product formulas and numerical algorithms Comm. Pure Appl. Math. 31 1978 205-256
C. Collette, C. Counhaye, J.P. Ponthot, Intégration du transfert de rugosité à un modèle de laminage à froid. Revue de Métallurgie-CIT, July-August 2000, pp. 961-969
Donéa J. Finite element analysis of transient dynamic fluid-structure interaction Donéa J. Advanced Structural Dynamics 1978 255-290 Advanced Science Publishers
Donéa J. Arbitrary Lagrangian-Eulerian finite element methods Belytschko T. Hughes T.J.R. Computational Methods for Transient Analysis 1983 474-516 North Holland chapter 10
Donéa J. Giuliani S. Halleux J.P. An Arbitrary Lagrangian-Eulerian FEM for transient dynamic fluid-structure interactions Comput. Meth. Appl. Mech. Engrg. 33 1982 689-723
Donéa J. Huerta A. Ponthot J.P. Rodriguez-Ferran A. Arbitrary Lagrangian Eulerian methods Stein E. de Borst R. Hughes T.J.R. Encyclopedia of Computational Mechanics 2004 John Wiley and sons
Eriksson L.E. Practical three-dimensional mesh generation using transfinite interpolation SIAM J. Sci. Stat. Comput. 6 3 1985 712-741
Frank R.M. Lazarus R.B. Mixed Eulerian-Lagrangian method Alder B.et al. Methods in Computational Physics vol. 3 1964 Academic Press New York
Gadala M.S. Movahhedy M.R. Wang J. On the mesh motion for ALE modeling of metal forming processes Finite Elem. Anal. Des. 38 2002 435-459
Gadala M.S. Wang J. ALE formulation and its application in solid mechanics Comput. Meth. Appl. Mech. Engrg. 167 1998 33-55
Gadala M.S. Wang J. Simulation of metal forming processes with finite element methods Int. J. Numer. Meth. Engrg. 44 1999 1397-1428
Ghosh S. Kikuchi N. An Arbitrary Lagrangian-Eulerian FEM for large deformation analysis for elastic-viscoplastic solids Comput. Meth. Appl. Mech. Engrg. 86 1991 127-188
Giuliani S. An algorithm for continuous rezoning of the hydrodynamic grid in arbitrary Lagrangian-Eulerian computer codes Nucl. Engrg. Des. 72 2 1982 205-212
Gordon W.J. Blending-function methods of bivariate and multivariate interpolation and approximation SIAM J. Numer. Anal. 8 1 1971 158-177
Gordon W.J. Hall C.H. Construction of curvilinear co-ordinate systems and applications to mesh generation Int. J. Numer. Meth. Engrg. 7 1973 461-477
Haber R. Abel J.F. Discrete transfinite mappings for the description and meshing of three-dimensional surfaces using interactive computer graphics Int. J. Numer. Meth. Engrg. 18 1982 41-66
Haber R. Shephard M.S. Abel J.F. Gallagher R.H. Greenberg D.P. A general two-dimensional, graphical finite element preprocessor utilizing discrete transfinite mappings Int. J. Numer. Meth. Engrg. 17 1981 1015-1044
Haber R.B. Hariandja B.H. Computational strategies for nonlinear and fracture mechanics problems. An Eulerian-Lagrangian finite element approach to large deformation frictional contact Comput. Struct. 20 1-3 1985 193-201
L.G. Hector, Lubricant film thickness measurements in axisymmetric stretch forming using optical interferometry, PhD thesis, Northwestern University, Evanston, Illinois, 1987
Hogge M. Ponthot J.P. Metal forming analysis via Eulerian-Lagrangian FEM with adaptive mesh Lat. Am. Res. 21 1991 217-224
T-C. Hsu, Friction modeling in computer simulation of sheet metal forming processes, PhD thesis, Northwestern University, Evanston, Illinois, 1991
Y.K. Hu, W.K. Liu. Simulation of ring rolling process by arbitrary Lagrangian Eulerian finite element method, vol. 20, chapter Computer modeling and simulation of manufacturing processes, ASME Winter Meeting, Dallas, Tx, 1990, pp. 225-240
Hu Y.-K. Liu W.K. The application of ale contact algorithms in bulk deformation processes Kulak Ronald F. Computational Aspect of Contact Impact and Penetration 1991 10-33 Aptek Inc.
Hu Y.-K. Liu W.K. An ALE hydrodynamic lubrication finite element method with application to strip rolling Int. J. Numer. Meth. Engrg. 36 1993 855-880
Huerta A. ALE stress update in transient plasticity problems Hinton E. Owen D.R.J. Onate E. Computational Plasticity. Fundamentals and Applications 1995 1865-1871 Pineridge Press
Huerta A. Casadei F. New ALE applications in nonlinear fast transient solid dynamics Engrg. Comput. 11 1994 317-345
A. Huerta, F. Casadei, J. Donéa, ALE stress update in transient plasticity problems, in: E. Oñate, D.R.J. Owen, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1995, pp. 1865-1876
Huétink J. van der Helm P.N. On Euler-Lagrange finite element formulation in forming and fluid problems Chenot J.L. Wood R.D. Zienkiewicz O. Numerical Methods in Industrial Forming Processes 1992 45-54 Sophia-Antipolis France
Huétink J. van der Lugt J. Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes Int. J. Numer. Meth. Engrg. 30 1990 1441-1457
Hughes T.J.R. Numerical implementation of constitutive models: Rate-independent deviatoric plasticity Nemat-Nasser S. Asaro R.J. Hegemier G.A. Theoretical Foundation for Large-Scale Computations of Nonlinear Material Behavior 1983 M. Nijhoff
Hughes T.J.R Liu W.K. Zimmerman T.K. Lagrangian Eulerian finite element formulation for incompressible viscous flows Comput. Meth. Appl. Mech. Engrg. 29 1981 329-349
Hughes T.J.R. Mallet M. Mizukami A. A new finite element formulation for computational fluid dynamics: II: beyond SUPG Comput. Meth. Appl. Mech. Engrg. 54 1986 341-355
Kennedy J.M. Belytschko T. Theory and application of a finite element method for Arbitrary Lagrangian-Eulerian fluids and structures Nucl. Engrg. Des. 68 1981 129-146
Koh H.M. Haber R.B. Elastodynamic formulation of the Eulerian-Lagrangian kinematic description J. Appl. Mech. 53 1986 839-845
Koh H.M. Lee H.S. Haber R.B. Dynamic crack propagation analysis using Eulerian-Lagrangian kinematic descriptions Comput. Mech. 3 1988 141-155
Laursen T.A. Computational Contact and Impact Mechanics 2002 Springer
Liu W.K. Hu Y.K. ALE hydrodynamic lubrication finite element method for strip rolling Chenot J.L. Wood R.D. Zienkiewicz O.C. Numerical Methods in Industrial Forming Processes 1992 731-736 Valbonne France
Liu W.K. Finite element procedures for fluid-structure interactions and application to liquid storage tanks Nucl. Engrg. Des. 65 1981 221-238
Liu W.K. Belytschko T. Chang H. An arbitrary Lagrangian-Eulerian finite element method for path dependent materials Comput. Meth. Appl. Mech. Engrg. 58 1986 227-245
Liu W.K. Chang H. Chen J.S. Belytschko T. Arbitrary Lagrangian Eulerian Petrov-Galerkin finite element for nonlinear continua Comput. Meth. Appl. Mech. Engrg. 68 1988 259-310
Liu W.K. Chen J.S. Belytschko T. Zhang Y.F. Adaptive ALE finite elements with particular reference to external work rate on frictional interface Comput. Meth. Appl. Mech. Engrg. 93 1991 189-216
Liu W.K. Ma D.C. Computer implementation aspects for fluid-structure interactions problems Comput. Meth. Appl. Mech. Engrg. 31 1982 129-148
N. Marsault, Modélisation du régime de lubrification mixte en laminage á froid (in French), PhD thesis, Ecole nationale supérieure des mines de Paris, France, 1998
Marsault N. Montmitonnet P. Deneuville P. Gratacos P. A model of mixed lubrication for cold rolling of strip Huétink J. Baaijens F.P.T. Simulation of Materials Processing: Theory, Methods and Applications 1998 Rotterdam The Netherlands
Martinet F. Chabrand P. Application of ALE finite element method to a lubricated friction model in sheet metal forming Int. J. Solids Struct. 37 29 2000 4005-4031
Montmitonnet P. Plasto-hydrodynamic lubrication (PHD)-application of lubrication theory to metal forming processes C.R. Acad. Sci. Paris, t.2, Series IV 2001 729-737
Noh W.F. CEL: a time-dependent two-space-dimensional, coupled Eulerian-Lagrangian code Alder B.et al. Meth. Comput. Phys., Fundam. Meth. Hydrodyn. vol. 3 1964 117-179 Academic Press New York
Nomura T. ALE finite element computations of fluid-structure interaction problems Comput. Meth. Appl. Mech. Engrg. 112 1994 291-308
Nomura T. Hughes T.J.R. An arbitrary Lagrangian-Eulerian finite element method for interaction of fluid and a rigid body Comput. Meth. Appl. Mech. Engrg. 95 1992 115-138
Patir N. Cheng H.S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication J. Lubr. Technol. 100 1978 12-17
J.-P. Ponthot, Traitement unifié de la Mécanique des Milieux Continus solides en grandes transformations par la méthode des éléments finis (in French), PhD thesis, Université de Liége, Liége, Belgium, 1995
Ponthot J.P. A method to reduce cost of mesh deformation in Eulerian-Lagrangian formulation Chenot J.L. Oñate E. Modelling of Metal Forming Processes, EUROMECH-233 1988 65-74 Sophia-Antipolis France
Ponthot J.P. Efficient mesh management in Eulerian-Lagrangian method for large deformations analysis Thomson E.G. Wood R.D. Zienkiewicz A. Samuelsson O. Numerical Methods in Industrial Forming Processes--NUMIFORM 1989 1989 203-210 Fort Collins Colorado
J.P. Ponthot, The use of the Eulerian-Lagrangian fern with adaptive mesh, applications to metal forming simulation, in: D.R.J. Owen, E. Oñate, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1992, pp. 2269-2281
Ponthot J.P. The use of the Eulerian-Lagrangian formulation including contact, applications to forming simulation via fem Chenot J.L. Wood R.D. Zienkiewicz O. Numerical Methods in Industrial Forming Processes 1992 293-300 Sophia-Antipolis France
Ponthot J.P. Unified stress update algorithms for the numerical simulation of large deformation elasto-plastic and elasto-viscoplastic processes Int. J. Plast. 18 1 2002 91-126
Ponthot J.P. Belytschko T. Arbitrary Lagrangian-Eulerian formulation for element-free Galerkin method Comput. Meth. Appl. Mech. Engrg. 152 1998 19-46
J.P. Ponthot, M. Hogge, The use of the Eulerian-Lagrangian FEM in metal forming applications including contact and adaptive mesh, in: Chandra, J.N. Reddy, (Eds.), Advances in Finite Deformation Problems in Material Processing, Atlanta. Ga., December 1991, ASME Winter Annual Meeting ASME AMD-125, pp. 44-64
G. Rekers, Numerical simulation of unsteady viscoelastic flow of polymers, PhD thesis, University of Twente, The Netherlands, 1995
Reynolds O. On the theory of lubrication and its application to Mr. Beauchamp tower's experiments, including an experimental determination of the viscosity of olive oil Philos. Trans. R. Soc. Land. 177 1886 157-234
Rodriguez-Ferran A. Casadei F. Huerta A. ALE stress update for transient and quasistatic processes Int. J. Numer. Meth. Engrg. 43 1998 241-262
Schreurs P.J.G. Veldpaus F.E. Brekelmans W.A.M. Simulation of forming processes using the Arbitrary Eulerian-Lagrangian formulation Comput. Meth. Appl. Mech. Engrg. 58 1986 19-36
Sheu S. Wilson W.R.D. Mixed lubrication of strip rolling Tribol. Trans. 37 3 1994 483-493
Simo J.C. Hughes T.J.R. General return mapping algorithms for rate-independent plasticity Desai C.S. Krenipl E. Constitutive Laws for Engineering Materials: Theory and Applications 1987 Elsevier Amsterdam
H.S. Stoker, Developments of the arbitrary Lagrangian Eulerian method in non linear solid mechanics, PhD thesis, University of Twente, The Netherlands, 1999
Sutcliffe M.P.F. Surface asperity deformation in metal forming processes Int. J. Mech. Sci. 30 1988 847-868
Tripp J.H. Surface roughness effects in hydrodynamic lubrication: The flow factor method J. Lubr. Technol. 105 1983 458-465
Wilson W.R.D. Friction and lubrication in sheet metal forming Koistinen D.P. Wang N.M. Mechanics of Sheet Metal Forming 1978 157-177 Plenum Press
Wilson W.R.D. Friction and lubrication in bulk metal forming processes J. Appl. Metal Work. 1 1979 7-19
Wilson W.R.D. Marsault N. Partial hydrodynamic lubrication with large fractional contact areas ASME--J. Tribol. 120 1998 1-5
Wilson W.R.D. Sheu S. Real area of contact and boundary friction in metal forming Int J. Mech. Sci. 30 1988 475-489
Wilson W.R.D. Walowit J.A. An isothermal hydrodynamic lubrication theory for strip rolling with front and back tensions Tribol. Convent. 1971 169-172
H. Wisselink, Analysis of Guillotining and Slitting, finite element simulations, PhD thesis, University of Twente, Enschede, The Netherlands, 2000
Yamada T. Kikuchi F. An Arbitrary Lagrangian-Eulerian finite element method for incompressible hyperelasticity Comput. Meth. Appl. Mech. Engrg. 102 1993 149-177
