[en] This paper presents a simple model for the calculation of the fire resistance of reinforced concrete columns. It has been developed on the base of extensive numerical simulations and has been calibrated on the base of a large data base of full scale experimental test results
Disciplines :
Civil engineering
Author, co-author :
Dotreppe, Jean-Claude ; Université de Liège - ULiège > Département Argenco : Secteur SE > Struct. en béton, struc. en bois et résist. au feu
Franssen, Jean-Marc ; Université de Liège - ULiège > Département Argenco : Secteur SE > Ingénierie du feu
Vanderzeipen, Yves
Language :
English
Title :
Calculation Method for Design of Reinforced Concrete Columns under Fire Conditions
"Preliminary Draft of an Appendix to the CEB-FIP Model Code," Bulletin d'Information du CEB, No. 145, Paris, 1982.
"Model Code for Fire Design of Concrete Structures - First Draft," Bulletin d'Information du CEB, No. 174, Lausanne, Switzerland, 1987.
"Fire Design of Concrete Structures in Accordance with CEB - FIP Model Code 90 - Final Draft," Bulletin d'Information du CEB, No. 208, Lausanne, 1991.
"Eurocode 2: Design of Concrete Structures - Part 1-2: General Rules - Structural Fire Design," European Prestandard, ENV 1992-1-2, European Committee for Standardization, Brussels, 1995.
"Guide for Determining the Fire Endurance of Concrete Elements," ACI Committee Report 216R-81, American Concrete Institute, Farmington Hills, Mich., 1982.
Harmathy, T. Z., "Properties of Building Materials: Bases for Fire Safety Design," Proceedings of the International Conference on Design of Structures Against Fire, Elsevier Applied Sciences Publishers, Ltd., London, 1986, pp. 87-104.
Abrams, M. S., "Compressive Strength of Concrete at Temperatures to 1600 × F," Temperature and Concrete, SP-25, American Concrete Institute, Farmington Hills, Mich., 1971.
Gustaferro, A. H., "Design Implementation - Concrete Structures," Proceedings of the International Conference on Design of Structures against Fire, Elsevier Applied Sciences Publishers, Ltd., London, 1986, pp. 189-211.
Bresler, B., "Response of Reinforced Concrete Frames to Fire," Report No. UCB FRG 76-12, University of California, Berkeley, 1976.
Hass, R., "Practical Rules for the Design of Reinforced Concrete and Composite Columns Submitted to Fire," Technical Report No. 69, Institut für Baustoffe, Massivbau und Brandschutz der Technischen Universität Braunschweig, 1986. (in German)
Lie, T. T., and Woollerton, J. L., "Fire Resistance of Reinforced Concrete Columns - Test Results," Technical Report No. 569, National Research Council, Institute for Research in Construction, Ottawa, 1988.
Dotreppe, J. C.; Franssen, J. M.; Bruls, A.; Baus, R.; Vandevelde, P.; Minne, R.; Van Nieuwenburg, D.; and Lambotte, H., "Experimental Research on the Determination of the Main Parameters Affecting the Behavior of Reinforced Concrete Columns under Fire Conditions," Magazine of Concrete Research, V. 49, No. 179, Thomas Telford Ltd, London, 1997, pp. 117-127.
Dotreppe, J. C., "Structural Models for Fire Analysis," IABSE Proceedings P-101/86, V. 3, Zürich, 1986, pp. 101-112.
Franssen, J. M.; Schleich, J. B.; and Cajot, L. G., "A Simple Model for the Fire Resistance of Axially Loaded Members According to Eurocode 3," Journal of Constructional Steel Research, V. 35, 1995, pp. 49-69.
Anderberg, Y., "Concrete Structures and Fire - Computer Simulations and Design Method for Fire Exposed Columns," Technical Report, No. 92-050 Rev A, Swedish Fire Research Board, Stockholm, 1993.
Hertz, K., "Simplified Calculation Method for Fire Exposed Structures," Supporting Document for CEN pr-ENV 1992-1-2, Technical Report No. 203, Institute of Building Design, Technical University of Denmark, 1993.
"Eurocode 3: Design of Steel Structures - Part 1-2: General Rules - Structural Fire Design," European Prestandard, ENV 1993 - 1-2, European Committee for Standardization, Brussels, 1994.
"Eurocode 3 : Design of Steel Structures - Part 1-1 : General Rules and Rules for Building," European Prestandard, ENV 1993-1-1, European Committee for Standardization, Brussels, 1992.
Rankine, W. J. M., Manual of Applied Mechanics, 1st ed., London, 1858.
Guerrin, A., Treatise on Reinforced Concrete, Vol. 2 : Calculation of Reinforced Concrete, Dunod, Paris, 1963. (in French)
"Buckling," Bulletin d'Information du CEB, No. 62 and 63, Paris, 1967.
"Buckling Manual," Bulletin d'Information du CEB, No. 93, Paris, 1973.
"Manual on Buckling and Instability" Bulletin d'Information du CEB, No. 123, Paris, 1977.
"BAEL 91 Rules: Technical Rules for Design and Calculation of Reinforced Concrete Constructions According to the Ultimate Limit State Method," Cahiers du CSTB, No. 2568, Paris, 1992. (in French)
Campus, F, and Massonnet, C., "Research on Buckling of A37 Steel Columns with an I-Shape Submitted to Non-Axial Loads," Bulletin du CERES, V. VII, Liège, 1955, pp. 119-338. (in French)
Austin, W. J., "Strength and Design of Metal Beam - Columns," Journal of the Structural Division, ASCE, V. 87, No. ST4, Apr. 1961, pp. 1-32.
