Steel; Phase transformation; Cooling; Ring rolling; LIMARC
Abstract :
[en] The paper presents a validated numerical model able to predict geometrical distortions of rings during cooling phase after hot ring rolling operations. The model is capable to take into account the effects of all the phenomena resulting from the coupling of thermal, mechanical and
metallurgical events. As simulation results strongly depend on the accuracy of input data, physical simulation experiments on real-material samples are developed and carried out to characterize material behaviour during phase transformation.
The numerical model is then validated by an industrial case proving its effectiveness in predicting final ring distortions at room temperature.
Disciplines :
Materials science & engineering
Author, co-author :
Casotto, Silvia
Pascon, Frédéric ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Habraken, Anne ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Bruschi, Stefania
Language :
English
Title :
Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations
Publication date :
2005
Journal title :
International Journal of Machine Tools and Manufacture
ISSN :
0890-6955
Publisher :
Pergamon Press - An Imprint of Elsevier Science, Oxford, United Kingdom
M.S. Joun, J.H. Chung, and R. Shivpuri An axisymmetric forging approach to preform design in ring rolling using a rigid-viscoplastic element method International Journal of Machine Tools & Manufacture 38 1998 1183 1191
E. Doege, and A. Aboutour Simulation of ring rolling process Proceedings in Advanced Technology of Plasticity vol. II 1987 pp. 817-824
K. Davey, and M.J. Ward The practicalities of ring rolling simulation for profiled rings Journal of Materials Processing Technology 5970 2002 1 7
A.M.S. Hamouda, S. Sulaiman, and C.K. Lau Finite element analysis on the effect of workpiece geometry on the quenching of ST50 steel Journal of Materials Processing Technology 119 2001 354 360
C. Heming, F. Jiang, and W. Honggang Estimation of the mechanical properties of a 42CrMo steel cylinder with phase transformation during quenching Journal of Materials Processing Technology 63 1997 568 572
S. Claudinon, P. Lamesle, J.J. Orteu, and R. Fortunier Continuous in situ measurement of quenching distortions using computer vision Journal of Materials Processing Technology 122 2002 69 81
C.C. Liu, X.J. Xu, and Z. Liu A FEM modeling of quenching and tempering and its application in industrial engineering Finite Elements in Analysis and Design 2003
Y.D. Huang, and L. Froyen Important factors to obtain homogeneous and ultrafine ferrite-pearlite microstructure in low carbon steel Journal of Materials Processing Technology 124 2002 216 226
H.C. Gur, and A.E. Tekkaya Numerical investigation of non-homogeneous plastic deformation in quenching process Materials Science and Engineering A319-321 2001 164 169
P.F. Bariani, S. Bruschi, and S. Casotto Integrating numerical and experimental techniques to determine geometrical distortions of rings during cooling phase in hot rolling operations Proceedings of 6th AITEM Conference, Gaeta 2003
F. Wever, A. Rose, W. Peter, W. Strassburg, and L. Rademacher Atlas zür Wärmebehandlung der Stälhe 1958 Verlag Stalheisen M.B.H. Düsseldorf
J.C. Louin, Effet d'hétérogénéités de teneur en carbone sur les cinétiques de transformation de phases et sur la genèse des contraintes internes lors due refroidissement d'acier, Inst. Nat. Polytechnique de Lorraine (France), 2003, PhD Thesis.
A.S. Judlin-Denis, Modélisation des interactions contrainte - transformation de phase et calcul par éléments finis de la génère des contraintes internes au cours de la trempe des aciers, Inst. Nat. Polytechnique de Lorraine (France), 1987, PhD thesis.
L. Taleb, N. Cavallo, and F. Waeckel Experimental analysis of transformation plasticity Intenational Journal of Plasticity 17 2001 1 20
A.M. Habraken, and M. Bourdouxhe Coupled thermo-mechanical-metallurgical analysis during the cooling process of steel piece European Journal of Mechanics A/Solids 11 3 1992 381 402
G.I. Rees, and P.H. Shipway Modelling transformation plasticity during the growth of bainite under stress Materials Science and Engineering A223 1997 168 178
S. Petit-Grostabussiat, L. Tleb, and J.F. Jullien Experimental results on classical plasticity of steels subjected to structural transformation International Journal of Plasticity 20 2003 1371 1386
M. Coret, S. Calloch, and A. Combescure Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading International Journal of Plasticity 2002 1707 1727
S. Bruschi, S. Casotto, A.M. Habraken, F. Pascon, CRAFT project RING G1ST-CT-2002-50162 Internal Report, 2004.