Profil

Habraken Anne

Département ArGEnCo

UEE

See author's contact details
ORCID
0000-0003-1838-7939
Main Referenced Co-authors
Duchene, Laurent  (177)
Mertens, Anne  (53)
Tchuindjang, Jérôme Tchoufack  (46)
Lecomte-Beckers, Jacqueline  (38)
Bouffioux, Chantal  (34)
Main Referenced Keywords
LIMARC (219); LiMaRC - Liège Materials Research Center (18); continuous casting (11); finite element method (11); Nanoindentation (11);
Main Referenced Unit & Research Centers
Aquapôle - ULiège [BE] (4)
UEE - Urban and Environmental Engineering - ULiège [BE] (3)
CAREM - Cellule d'Appui à la Recherche et à l'Enseignement en Microscopie - ULiège [BE] (2)
University of Liège, UEE Research Unit, MSM division (2)
A&M - Aérospatiale et Mécanique - ULiège [BE] (1)
Main Referenced Disciplines
Materials science & engineering (299)
Civil engineering (74)
Mechanical engineering (51)
Computer science (3)
Engineering, computing & technology: Multidisciplinary, general & others (3)

Publications (total 416)

The most downloaded
2539 downloads
Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., & Habraken, A. (2006). Quality assessment of speckle patterns for digital image correlation. Optics and Lasers in Engineering, 44 (11), 1132-1145. doi:10.1016/j.optlaseng.2005.10.004 https://hdl.handle.net/2268/15779

The most cited

423 citations (Scopus®)

Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., & Habraken, A. (2006). Quality assessment of speckle patterns for digital image correlation. Optics and Lasers in Engineering, 44 (11), 1132-1145. doi:10.1016/j.optlaseng.2005.10.004 https://hdl.handle.net/2268/15779

Books and journal issues published as editor or director

Van Hemelrijck, D., Aggelis, D., De Belie, N., Delaunois, F., Geernaert, T., Habraken, A., Guillaume, P., Hendrick, P., Reynders, E., Simar, A., & Van Landuit, S. (Eds.). (2018). Procee,ICEM 2018 The 18th International Conference on Experimental Mechanics (ICEM 2018) Brussels, Belgium. (Open Access editor). MDPI.

Book chapters or contributions to a collective book as author or co-author

Duchene, L., & Habraken, A. (2007). Multiscale Approaches. In F. Chinesta & E. Cueto, Advances in Material Forming - Esaform 10 years on (pp. 125-141). doi:10.1007/978-2-287-72143-4_8

Habraken, A. (2001). Anisotropic Elastoplastic Model Based on Texture. In Lemaitre Handbook of Materials Behavior Models (pp. 204-212). London, United Kingdom: Academic Press.

Cescotto, S., Wauters, M., Habraken, A., & Zhu, Y. (2001). A fully coupled anisotropic elasto-plastic-damage model. In Handbook of Materials Behavior Models (pp. 802-813). London, United Kingdom: Academic Press.

Habraken, A., Duchene, L., Godinas, A., & Cescotto, S. (2001). Anisotropic elastoplastic model based on texture. In Handbook of materials behavior models.

Dyduch, M., Cescotto, S., & Habraken, A. (1995). Error estimates and indicators for adaptive analysis of bulk forming. In D. R. J. Owen & E. Onate, Computational plasticity. Fundamentals and Applications (pp. 1355-1367). Swansea, United Kingdom: Pineridge Press.

Articles accepted in reviewed journal

RÍOS, I., MARTÍNEZ, A., Saggionetto, E., Mertens, A., Duchene, L., Habraken, A., & Tuninetti, V. (15 May 2024). Numerical modeling of the compressive behavior of 316L body-centered cubic lattice structures. Materials Research Proceedings, 41 (2024), 224-233. doi:10.21741/9781644903131-25
Peer reviewed

Rojas Ulloa, C. E., Morch, H., Tuninetti, V., Tchuindjang, J. T., Pensis, O., Di Giovanni, A., Mertens, A., Duchene, L., & Habraken, A. (2024). Microstructure evolution of Incoloy 800H in industrial environment and correlation with creep mechanisms from literature. Materials at High Temperatures, 1-11. doi:10.1080/09603409.2024.2342602
Peer Reviewed verified by ORBi

Rojas Ulloa, C. E., Morch, H., Tuninetti, V., Duchene, L., & Habraken, A. (01 February 2024). Implementation of a modified Graham-Walles viscosity function within a Chaboche viscoplastic constitutive model. Computers and Mathematics with Applications, 155, 165-175. doi:10.1016/j.camwa.2023.12.002
Peer reviewed

Gallo, C., Duchene, L., Quy Duc Pham, T., Jardin, R., Tuninetti, V., & Habraken, A. (30 January 2024). Impact of Boundary Parameters Accuracy on Modeling of Directed Energy Deposition Thermal Field. Metals, 14 (2), 173. doi:10.3390/met14020173
Peer Reviewed verified by ORBi

Pham Quy Duc, T., Hoang, T. V., Tran, X. V., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (06 October 2023). A framework for the robust optimization under uncertainty in additive manufacturing. Journal of Manufacturing Processes, 103, 53 - 63. doi:10.1016/j.jmapro.2023.08.009
Peer reviewed

Tuninetti, V., Oñate, A., Valenzuela, M., Sepulveda, H., Pincheira, G., Medina, C., García-Herrera, C., Duchene, L., & Habraken, A. (September 2023). Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy. Journal of Materials Research and Technology, 26, 5028 - 5036. doi:10.1016/j.jmrt.2023.08.255
Peer Reviewed verified by ORBi

Fetni, S., Delahaye, J., & Habraken, A. (September 2023). Python Data Driven framework for acceleration of Phase-Field simulations[Formula presented]. Software Impacts, 17, 100563. doi:10.1016/j.simpa.2023.100563
Peer Reviewed verified by ORBi

Jardin, R. T., Tuninetti, V., Tchuindjang, J. T., Duchene, L., Hashemi, S. N., Tran, H. S., Carrus, R., Mertens, A., & Habraken, A. (August 2023). Optimizing laser power of directed energy deposition process for homogeneous AISI M4 steel microstructure. Optics and Laser Technology, 163, 109426. doi:10.1016/j.optlastec.2023.109426
Peer Reviewed verified by ORBi

Rojas Ulloa, C. E., Tuninetti, V., Sepulveda, H., Betaieb, E., Pincheira, G., Gilles, G., Duchene, L., & Habraken, A. (2023). Accurate numerical prediction of ductile fracture and micromechanical damage evolution for Ti6Al4V alloy. Computational Mechanics. doi:10.1007/s00466-023-02362-3
Peer Reviewed verified by ORBi

Dashti, A., Keller, C., Vieille, B., Guillet, A., Gallo, C., Habraken, A., & Duchene, L. (2023). Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-11315-2
Peer Reviewed verified by ORBi

Morch, H., Yuan, S., Duchene, L., Harzallah, R., & Habraken, A. (October 2022). A review of higher order Newton type methods and the effect of numerical damping for the solution of an advanced coupled Lemaitre damage model. Finite Elements in Analysis and Design, 209, 103801. doi:10.1016/j.finel.2022.103801
Peer Reviewed verified by ORBi

Tran, H. S., Bouffioux, C., Dedry, O., Rojas Ulloa, C. E., Duchene, L., Mertens, A., & Habraken, A. (2022). Identification of a soft matrix-hard inclusion material by indentation. International Journal of Mechanical Sciences, 107723. doi:10.1016/j.ijmecsci.2022.107723
Peer Reviewed verified by ORBi

Betaieb, E., Duchene, L., & Habraken, A. (2022). Calibration of kinematic hardening parameters on sheet metal with a Computer Numerical Control machine. International Journal of Material Forming. doi:10.1007/s12289-022-01714-3
Peer Reviewed verified by ORBi

Habraken, A., Aksen, T. A., Alves, J. L., Amaral, R. L., Betaieb, E., Chandola, N., Corallo, L., Cruz, D. J., Duchene, L., Engel, B., Esener, E., Firat, M., Frohn-Sörensen, P., Galán-López, J., Ghiabakloo, H., Kestens, L. A. I., Lian, J., Lingam, R., Liu, W., ... Vincze, G. (15 July 2022). Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations. International Journal of Material Forming, 15 (5), 61. doi:10.1007/s12289-022-01672-w
Peer Reviewed verified by ORBi

Pham Quy Duc, T., Truong Vinh Hoang, Xuan Van Tran, Quoc Tuan Pham, Seif Fetni, Duchene, L., Tran Son Hoang, & Habraken, A. (17 May 2022). Characterization, propagation, and sensitivity analysis of uncertainties in the directed energy deposition process using a deep learning-based surrogate model. Probabilistic Engineering Mechanics, 69, 103297. doi:10.1016/j.probengmech.2022.103297
Peer Reviewed verified by ORBi

Yuan, L., Guo, M., Habraken, A., Duchene, L., & Zhuang, L. (14 March 2022). Extremely improved formability of Al–Zn–Mg–Cu alloys via micro-domain heterogeneous structure. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 837, 142737. doi:10.1016/j.msea.2022.142737
Peer reviewed

Pham Quy Duc, T., Hoang, T. V., Van Tran, X., Tuan Pham, Q., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Fast and accurate prediction of temperature evolutions in additive manufacturing process using deep learning. Journal of Intelligent Manufacturing. doi:10.1007/s10845-021-01896-8
Peer Reviewed verified by ORBi

El Fetni, S., Habraken, A., & Duchene, L. (2022). Capabilities of Auto-encoders and Principal Component Analysis of the reduction of microstructural images; Application on the acceleration of Phase-Field simulations. Computational Materials Science, 216 (January 2023). doi:10.1016/j.commatsci.2022.111820
Peer Reviewed verified by ORBi

Tchuindjang, J. T., Paydas, H., Tran, H. S., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (31 May 2021). A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition. Materials, 14 (11), 2985. doi:10.3390/ma14112985
Peer Reviewed verified by ORBi

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Duchene, L., Mertens, A., & Habraken, A. (17 March 2021). Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design, 204 (109661). doi:10.1016/j.matdes.2021.109661
Peer reviewed

Rojas-Ulloa, C., Bouffioux, C., Jaramillo, A., García-Herrera, C., Hussain, T., Duchene, L., Riu, G., Roa, J. J., Flores, P., Habraken, A., & Tuninetti, V. (16 March 2021). Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V. Advanced Engineering Materials, 2001341. doi:10.1002/adem.202001341
Peer Reviewed verified by ORBi

Morch, H., Duchene, L., Harzallah, R., Tuninetti, V., & Habraken, A. (January 2021). Efficient temperature dependence of parameters for thermo-mechanical finite element modeling of Alloy 230. European Journal of Mechanics. A, Solids, 85. doi:10.1016/j.euromechsol.2020.104116
Peer Reviewed verified by ORBi

Yuan, S., Duchene, L., Keller, C., Hug, E., Folton, C., Betaieb, E., Milis, O., & Habraken, A. (2021). Mechanical response of nickel multicrystals for shear and tensile conditions at room temperature and 573 K. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 809, 140987. doi:10.1016/j.msea.2021.140987
Peer Reviewed verified by ORBi

Jardin Tome, R., Tuninetti, V., Tchuindjang, J. T., Hashemi, S. N., Carrus, R., Mertens, A., Duchene, L., Tran, H. S., & Habraken, A. (22 November 2020). Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals, 10 (2020), 1554. doi:10.3390/met10111554
Peer Reviewed verified by ORBi

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Jardin, R., Duchene, L., Mertens, A., & Habraken, A. (September 2020). 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing, 50 (86-92). doi:10.1016/j.promfg.2020.08.016
Peer reviewed

Tuninetti, V., Flores, P., Valenzuela, M., Pincheira, G., Medina, C., Duchene, L., & Habraken, A. (06 March 2020). Experimental characterization of the compressive mechanicalbehaviour of Ti6Al4V alloy at constant strain rates over the fullelastoplastic range. International Journal of Material Forming, 13 (709–724). doi:10.1007/s12289-020-01543-2
Peer Reviewed verified by ORBi

Yuan, S., Duchene, L., Keller, C., Hug, E., & Habraken, A. (March 2020). Tunable surface boundary conditions in strain gradient crystal plasticity model. Mechanics of Materials, 145. doi:10.1016/j.mechmat.2020.103393
Peer Reviewed verified by ORBi

Tuninetti, V., Gilles, G., Flores, P., Pincheira, G., Duchene, L., & Habraken, A. (14 September 2019). Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy. Meccanica, 54 (11-12), 1823–1840. doi:10.1007/s11012-019-01051-x
Peer reviewed

Delahaye, J., Tchuindjang, J. T., Lecomte-Beckers, J., Rigo, O., Habraken, A., & Mertens, A. (15 August 2019). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Acta Materialia, 175, 160-170. doi:10.1016/j.actamat.2019.06.013
Peer Reviewed verified by ORBi

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (01 February 2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45. doi:10.1016/j.matlet.2018.09.157
Peer Reviewed verified by ORBi

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2018). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures, 151, 45-56. doi:10.1016/j.ijsolstr.2017.04.013
Peer Reviewed verified by ORBi

Felipe Guzmán, C., Saavedra Flores, E. I., & Habraken, A. (2018). Damage characterization in a ferritic steel sheet: Experimental tests, parameter identification and numerical modeling. International Journal of Solids and Structures, 155, 109-122. doi:10.1016/j.ijsolstr.2018.07.014
Peer Reviewed verified by ORBi

Duflou, J., Habraken, A., Cao, J., Malhotra, R., Bambach, M., Adams, D., Vanhove, H., Mohammadi, A., & Jeswiet, J. (2018). Single point incremental forming: state-of-the-art and prospects. International Journal of Material Forming, 11 (6), 743-773. doi:10.1007/s12289-017-1387-y
Peer Reviewed verified by ORBi

Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (15 August 2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142. doi:10.1016/j.matdes.2017.04.092
Peer Reviewed verified by ORBi

Neira Torres, I., Gilles, G., Tchuindjang, J. T., Flores, P., Lecomte-Beckers, J., & Habraken, A. (June 2017). FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. International Journal of Material Forming, Volume 10, (Issue 3), 287–305. doi:10.1007/s12289-015-1277-0
Peer Reviewed verified by ORBi

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (July 2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9 (3), 259-434. doi:10.1007/s12289-014-1213-8
Peer Reviewed verified by ORBi

Banabic, D., Habraken, A., & Yoon, J. W. (July 2016). Safe, flexible and efficient sheet metal forming: formability - fracture, incremental sheet forming & rolling. International Journal of Material Forming, 9 (3). doi:10.1007/s12289-015-1243-x
Peer Reviewed verified by ORBi

Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (June 2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations, 33 (5), 1388-1421. doi:10.1108/EC-06-2015-0172
Peer Reviewed verified by ORBi

Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017
Peer Reviewed verified by ORBi

Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (December 2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59. doi:10.1016/j.finel.2015.08.005
Peer Reviewed verified by ORBi

Balan, T., Lemoine, X., Maire, E., & Habraken, A. (2015). Implementation of a damage evolution law for dual-phase steels in Gurson-type models. Materials and Design, (88), 1213-1222. doi:10.1016/j.matdes.2015.09.075
Peer Reviewed verified by ORBi

HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (July 2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151. doi:10.1016/j.mechmat.2015.07.001
Peer Reviewed verified by ORBi

Tuninetti, V., Gilles, G., Pardoen, T., & Habraken, A. (April 2015). Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6A1-4V. International Journal of Plasticity, 67, 53-68. doi:10.1016/j.ijplas.2014.10.003
Peer Reviewed verified by ORBi

Tchuindjang, J. T., Neira Torres, I., Fores, P., Habraken, A., & Lecomte-Beckers, J. (12 March 2015). Phase Transformations and Crack Initiation in a High-Chromium Cast Steel Under Hot Compression Tests. Journal of Materials Engineering and Performance, 24 (5), 2025-2041. doi:10.1007/s11665-015-1464-7
Peer Reviewed verified by ORBi

Ben Bettaïeb, M., Van Hoof, T., Minnebo, H., Pardoen, T., Dufour, P., Jacques, P., & Habraken, A. (21 January 2015). Micromechanics-Based Damage Analysis of Fracture in Ti5553 Alloy with Application to Bolted Sectors. Journal of Materials Engineering and Performance, 24, 1262-1278. doi:10.1007/s11665-015-1383-7
Peer Reviewed verified by ORBi

Keller, C., Hug, E., Habraken, A., & Duchene, L. (January 2015). Effect of stress path on the miniaturization size effect for nickel polycrystals. International Journal of Plasticity, 64, 26-39. doi:10.1016/j.ijplas.2014.07.001
Peer Reviewed verified by ORBi

ben bettaieb, M., Van Hoof, T., Pardoen, T., dufour, P., Lenain, A., Pascal, J.-J., & Habraken, A. (September 2014). On the Elasto-viscoplastic behavior of the Ti5553 alloy. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 617, 97-109. doi:10.1016/j.msea.2014.08.055
Peer Reviewed verified by ORBi

Hug, E., keller, C., & Habraken, A. (April 2014). Impact of metallurgical size effects on plasticity of thin metallic materials. Materials Science Forum, 783-786, 2290-2295. doi:10.4028/www.scientific.net/msf.783-786.2290
Peer reviewed

Bouffioux, C., Boman, R., Caillet, N., Rich, N., Ponthot, J.-P., & Habraken, A. (2014). Effect of the kinematic hardening in the simulations of the straightening of long rolled profiles. Key Engineering Materials, 611-612, 178-185. doi:10.4028/www.scientific.net/KEM.611-612.178
Peer Reviewed verified by ORBi

Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., sinnaeve, M., & Habraken, A. (2014). Study of residual stresses in bimetallic work rolls. Advanced Materials Research, 996, 580-585. doi:10.4028/www.scientific.net/AMR.996.580
Peer reviewed

Gilles, G., Habraken, A., & Duchene, L. (2014). Experimental investigation and phenomenological modeling of the quasi-static mechanical behavior of TA6V titanium alloy. Key Engineering Materials, 622-623, 1200-1206. doi:10.4028/www.scientific.net/KEM.622-623.1200
Peer Reviewed verified by ORBi

Tuninetti Vásquez, V., & Habraken, A. (2014). Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6A1-4V alloy. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, (605), 39-50. doi:10.1016/j.msea.2014.03.009
Peer Reviewed verified by ORBi

Fansi Tchonko, J., Balan, T., Lemoine, X., Maire, E., Landron, C., Bouaziz, O., Ben Bettaieb, M., & Habraken, A. (01 May 2013). Numerical investigation and experimental validation of physically-based advanced GTN model for DP steels. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 569, 1-12. doi:10.1016/j.msea.2013.01.019
Peer Reviewed verified by ORBi

Zhang, L., Habraken, A., Ben Bettaieb, A., & Duchene, L. (17 April 2013). Parametric study of metal/polymer multilayer coatings for temperature wrinkling prediction. Journal of Materials Engineering and Performance, 22 (9), 2437-2445. doi:10.1007/s11665-013-0541-z
Peer Reviewed verified by ORBi

Duchene, L., Guzmán Inostroza, C. F., Behera, A. K., Duflou, J., & Habraken, A. (2013). Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-shell finite elements. Key Engineering Materials. doi:10.4028/www.scientific.net/KEM.549.180
Peer Reviewed verified by ORBi

Guzmán Inostroza, C. F., & Habraken, A. (2013). Towards fracture prediction in single point incremental forming. Key Engineering Materials, 554-557, 2355-2362. doi:10.4028/www.scientific.net/KEM.554-557.2355
Peer Reviewed verified by ORBi

Guzmán Inostroza, C. F., Gu, J., Duflou, J., Vanhove, H., Flores, P., & Habraken, A. (31 July 2012). Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations. International Journal of Solids and Structures, 49 (25), 3594-3604. doi:10.1016/j.ijsolstr.2012.07.016
Peer Reviewed verified by ORBi

Tirry, W., Bouvier, S., Benmhenni, N., Hammami, W., Habraken, A., Coghe, F., SCHRYVERS, D., & Rabet, L. (02 July 2012). Twinning in pure Ti subjected to monotonic simple shear deformation. Materials Characterization, 72 (October 2012), 24–36. doi:10.1016/j.matchar.2012.07.001
Peer Reviewed verified by ORBi

Keller, C., Habraken, A., & Duchene, L. (July 2012). Finite element investigation of size effects on the mechanical behavior of nickel single crystals. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 550 (30), 342-349. doi:10.1016/j.msea.2012.04.085
Peer Reviewed verified by ORBi

Rah, K., Paepegem, W., Habraken, A., & Degrieck, J. (March 2012). A mixed solid-shell element for the analysis of laminated composites. International Journal for Numerical Methods in Engineering, 89 (7), 805-828. doi:10.1002/nme.3263
Peer Reviewed verified by ORBi

Guzmán Inostroza, C. F., Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Habraken, A., & Duchene, L. (February 2012). Evaluation of the Enhanced Assumed Strain and Assumed Natural Strain in the SSH3D and RESS3 Solid Shell Elements for Single Point Incremental Forming Simulation. Key Engineering Materials, 504-506, 913-918. doi:10.4028/www.scientific.net/KEM.504-506.913
Peer Reviewed verified by ORBi

Ben bettaieb, M., Lenain, A., & Habraken, A. (2012). Static and fatigue characterization of the Ti5553 titanium alloy. Fatigue and Fracture of Engineering Materials and Structures, (36), 401-415.
Peer Reviewed verified by ORBi

Tuninetti Vásquez, V., Gilles, G., Milis, O., Lecarme, L., & Habraken, A. (2012). Compression test for plastic anisotropy characterization using optical full-field dis-placement measurement technique. Steel Research International.
Peer Reviewed verified by ORBi

Keller, C., Hug, E., Habraken, A., & Duchene, L. (2012). Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals. International Journal of Plasticity, 29, 155–172. doi:10.1016/j.ijplas.2011.08.007
Peer Reviewed verified by ORBi

Gilles, G., Cazacu, O., Hammami, W., Habraken, A., & Duchene, L. (2012). Experimental and numerical study of TA-6V mechanical behavior in different monotonic loading conditions at room temperature. Procedia IUTAM, 3, 100-114. doi:10.1016/j.piutam.2012.03.008
Peer Reviewed verified by ORBi

Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (November 2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211 (11), 1684-1693. doi:10.1016/j.jmatprotec.2011.05.010
Peer Reviewed verified by ORBi

Hammami, W., Gilles, G., Habraken, A., & Duchene, L. (01 June 2011). Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy. International Journal of Material Forming, 4 (2), 205-2015. doi:10.1007/s12289-011-1028-9
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (March 2011). Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials, 43 (3), 139-156. doi:10.1016/j.mechmat.2011.02.005
Peer Reviewed verified by ORBi

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2011). Prediction of the Tension/Compression asymmetry of ECAP processed FCC material using an integrated model based on dislocation and back-stress. Materials Science Forum, 667-669, 961-966. doi:10.4028/www.scientific.net/MSF.667-669.961
Peer reviewed

Verlinden, B., Chen, E., Duchene, L., & Habraken, A. (2011). Transient yielding during compression tests on ECAP’ed AA1050 Aluminium. Materials Science Forum, 667-669, 955-960. doi:10.4028/www.scientific.net/MSF.667-669.955
Peer reviewed

Eyckens, P., Belkassem, B., Henrard, C., Gu, J., Sol, H., Habraken, A., Duflou, J. R., Van Bael, A., & Van Houtte, P. (2011). Strain Evolution in the Single Point Incremental Forming Process: Digital Image Correlation Measurement and Finite Element Prediction. International Journal of Material Forming, 55-71. doi:10.1007/s12289-010-0995-6
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming, 4 (3), 283-297. doi:10.1007/s12289-010-0993-8
Peer Reviewed verified by ORBi

Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clement, N., Diarra, H., & Habraken, A. (2011). Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests. European Journal of Mechanics. A, Solids, 30, 248-255. doi:10.1016/j.euromechsol.2010.11.001
Peer Reviewed verified by ORBi

Henrard, C., Bouffioux, C., Eyckens, P., Sol, H., Duflou, J. R., Van Houtte, P., Van Bael, A., Duchene, L., & Habraken, A. (2011). Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Computational Mechanics, 47, 573-590. doi:10.1007/s00466-010-0563-4
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2011). On the numerical integration of an advanced Gurson model. International Journal for Numerical Methods in Engineering, 85 (8), 1049-1072. doi:10.1002/nme.3010
Peer Reviewed verified by ORBi

Fansi Tchonko, J., Ben Bettaieb, M., Balan, T., Lemoine, X., & Habraken, A. (2011). Notched Specimens Fracture Prediction with an Advanced GTN Model. Key Engineering Materials, 488-489, 77-80. doi:10.4028/www.scientific.net/KEM.488-489.77
Peer Reviewed verified by ORBi

Gilles, G., Hammami, W., Libertiaux, V., Cazacu, O., Yoon, J. H., Habraken, A., & Duchene, L. (2011). Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature. International Journal of Solids and Structures, 48 (9), 1277–1289. doi:10.1016/j.ijsolstr.2011.01.011
Peer Reviewed verified by ORBi

Rah, K., Van Paepegem, W., Habraken, A., & Degrieck, J. (2011). A partial hybrid stress solid-shell element for the analysis of laminated composites. Computer Methods in Applied Mechanics and Engineering, 200 (49-52), 3526–3539. doi:10.1016/j.cma.2011.08.020
Peer Reviewed verified by ORBi

Lequesne, C., Plumier, A., Duchene, L., & Habraken, A. (10 May 2010). Modeling of Crack Propagation in Weld Beam-to-Column Connection Submitted to Cyclic Loading with Cohesive Zone Model. Journal of ASTM International, 7 (5). doi:10.1520/JAI102531
Peer reviewed

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part II: Numerical investigations. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 528 (1), 442-448. doi:10.1016/j.msea.2010.09.031
Peer Reviewed verified by ORBi

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modeling of back-stress evolution in equal-channel angular pressing: from one pass to multiple passes. Journal of Materials Science, 45 (17), 4696-4704. doi:10.1007/s10853-010-4385-8
Peer Reviewed verified by ORBi

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modelling of back-stress during equal-channel angular pressing. Reviews on Advanced Materials Science, 25 (1), 23-31.
Peer reviewed

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part I: Theoretical development and numerical implementation. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 528 (1), 434-441. doi:10.1016/j.msea.2010.09.030
Peer Reviewed verified by ORBi

Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., Duchene, L., & Ben Bettaieb, M. (2010). Effect of a decrease in sample dimensions on plasticity: application to the micro-forming of nickel. Steel Research International, 81 (9), 1173-1177.
Peer Reviewed verified by ORBi

Flores, P., Tuninetti Vásquez, V., Gilles, G., Gonry, P., Duchene, L., & Habraken, A. (2010). Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Journal of Materials Processing Technology, 210, 1772-1779. doi:10.1016/j.jmatprotec.2010.06.008
Peer Reviewed verified by ORBi

Rah, K., Van Paepegem, W., Habraken, A., Alves de Sousa, R., & Valente, R. A. F. (August 2009). Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures. International Journal of Material Forming, volume 2 (Supplément 1), 943-947. doi:10.1007/s12289-009-0629-z
Peer Reviewed verified by ORBi

Poortmans, S., Duchene, L., Habraken, A., & Verlinden, B. (2009). Modelling compression tests on aluminium produced by equal channel angular extrusion. Acta Materialia. doi:10.1016/j.actamat.2008.12.023
Peer Reviewed verified by ORBi

Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clément, N., Diarra, H., & Habraken, A. (2009). Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553. Acta Materialia, (57), 5186 - 5195. doi:10.1016/j.actamat.2009.07.020
Peer Reviewed verified by ORBi

Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040. doi:10.1016/j.ijfatigue.2009.03.003
Peer Reviewed verified by ORBi

Rossi, B., Degée, H., & Habraken, A. (February 2008). Analytical formulation for actual mechanical properties of stainless steel structural members. Steel Research International, 79 (2), 265-272.
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2008). Study of bendability of steel sheets. Steel Research International, (79/1), 225-232.
Peer Reviewed verified by ORBi

Duflou, J. R., Verbert, J., Belkassem, B., Gu, J., Sol, H., Henrard, C., & Habraken, A. (2008). Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Annals - Manufacturing Technology, (57), 253-256. doi:10.1016/j.cirp.2008.03.030
Peer reviewed

Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427. doi:10.1016/j.ijplas.2007.03.015
Peer Reviewed verified by ORBi

de Montleau, P., Habraken, A., & Duchene, L. (2008). A new finite element integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.2130
Peer Reviewed verified by ORBi

Schwartz, R., Castagne, S., & Habraken, A. (2007). Numerical study to identify the material parameters of a damage model. Computer Methods in Materials Science, 7 (2), 237-242.
Peer reviewed

Poortmans, S., Boubakar, D., Habraken, A., & Verlinden, B. (2007). Correcting tensile test results of ECAE-deformed aluminium. Scripta Materialia, 56 (9), 749-752. doi:10.1016/j.scriptamat.2007.01.018
Peer Reviewed verified by ORBi

Castagne, S., Talamona, D., & Habraken, A. (2007). A damage constitutive law for steel elevated temperature. Identification of the parameters. International Journal of Material Processing, (1), 23-43.
Peer reviewed

Duchene, L., El Houdaigui, F., & Habraken, A. (2007). Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity, 23 (8), 1417-1438. doi:10.1016/j.ijplas.2007.01.008
Peer Reviewed verified by ORBi

Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26. doi:10.1016/j.jmatprotec.2006.10.044
Peer Reviewed verified by ORBi

Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502. doi:10.4028/0-87849-437-5.495
Peer Reviewed verified by ORBi

Flores, P., Bonnet, F., & Habraken, A. (2007). Plane strain test for metal sheet characterization. Key Engineering Materials, 344, 135-142. doi:10.4028/0-87849-437-5.135
Peer Reviewed verified by ORBi

Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23 (3), 420-449. doi:10.1016/j.ijplas.2006.05.006
Peer Reviewed verified by ORBi

Pascon, F., & Habraken, A. (2007). Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs. Computer Methods in Applied Mechanics and Engineering, 196, 2285-5599. doi:10.1016/j.cma.2006.07.017
Peer Reviewed verified by ORBi

He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., & Habraken, A. (2006). An FEM-aided investigation of the deformation during single point incremental forming. Modelling and Simulation in Materials Science and Engineering.
Peer Reviewed verified by ORBi

Pascon, F., Cescotto, S., & Habraken, A. (2006). A 2.5 D finite element model for bending and straightening in continuous casting of steel slabs. International Journal for Numerical Methods in Engineering, (68), 125-149. doi:10.1002/nme.1715
Peer Reviewed verified by ORBi

Lecomte-Beckers, J., Moureaux, P., Carton, M., & Habraken, A. (2006). Characterization of Duplex steel Uranus 76N during deformation and heat treatment. Physica Status Solidi A. Applications and Materials Science, 203 (15), 3651-3664. doi:10.1002/pssa.200621200
Peer Reviewed verified by ORBi

Lecompte, D., Smits, A., Bossuyt, S., Sol, H., Vantomme, J., Van Hemelrijck, D., & Habraken, A. (2006). Quality assessment of speckle patterns for digital image correlation. Optics and Lasers in Engineering, 44 (11), 1132-1145. doi:10.1016/j.optlaseng.2005.10.004
Peer Reviewed verified by ORBi

Duchene, L., & Habraken, A. (2005). Analysis of the sensivity of FEM predictions to numerical parameters in deep drawing simulations. European Journal of Mechanics. A, Solids, (24), 614-629. doi:10.1016/j.euromechsol.2005.04.007
Peer Reviewed verified by ORBi

He, S., Van Bael, A., Van Houtte, P., Szekeres, A., Duflou, J., Henrard, C., & Habraken, A. (2005). Finite element modeling of incremental forming of aluminium sheets. Advanced Materials Research, 6/8, 525-532. doi:10.4028/0-87849-972-5.525
Peer reviewed

Henrard, C., Habraken, A., Szekeres, A., Duflou, J., He, S., Van Bael, A., & Van Houtte, P. (2005). Comparison of FEM simulations for the incremental forming process. Advanced Materials Research, 6-8, 533-542. doi:10.4028/0-87849-972-5.533
Peer reviewed

Casotto, S., Pascon, F., Habraken, A., & Bruschi, S. (2005). Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. International Journal of Machine Tools and Manufacture, 45 (6), 657-664. doi:10.1016/j.ijmachtools.2004.10.007
Peer Reviewed verified by ORBi

Flores, P., Rondia, E., & Habraken, A. (2005). Development of an experimental equipment for the identification of constitutive laws. International Journal of Forming Processes, (Special Issue), 117-137.
Peer reviewed

Pietrapertosa, C., Habraken, A., & Jaspart, J.-P. (2005). Modélisation du comportement (clinchage des tôles minces). Techniques de l'ingénieur, 4 (BM 7 820), 1-8.
Peer reviewed

Habraken, A. (2004). Modelling the plastic anisotropy of metals. Archives of Computational Methods in Engineering, 11, 3-96. doi:10.1007/BF02736210
Peer reviewed

Habraken, A., & Duchene, L. (2004). Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity, 20 (Issue 8-9), 1525-1560. doi:10.1016/j.ijplas.2003.11.006
Peer Reviewed verified by ORBi

Jeunechamps, P.-P., Walmag, J., Duysinx, P., Delhez, E., Tossings, P., Habraken, A., & Ponthot, J.-P. (2004). A trust region algorithm for automatic identification of elasto-viscoplastic model parameters in metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 2004.
Peer reviewed

Castagne, S., Pascon, F., Blès, G., & Habraken, A. (2004). Developments in finite element simulations of continuous casting. Journal de Physique IV, 120, 447-455. doi:10.1051/jp4:2004120051
Peer reviewed

Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463.
Peer reviewed

Castagne, S., Remy, M., & Habraken, A. (2003). Development of a Mesoscopic Cell Modeling the Damage Process in Steel at Elevated Temperature. Key Engineering Materials, 233-236, 145-150.
Peer Reviewed verified by ORBi

Castagne, S., Habraken, A., & Cescotto, S. (2003). Application of a damage model to an aluminium alloy. International Journal of Damage Mechanics, 12 (1), 5-30. doi:10.1177/1056789503012001001
Peer Reviewed verified by ORBi

Remy, M., Castagne, S., & Habraken, A. (September 2002). Progress in microscopic modeling of damage in steel at high temperature. International Journal of Forming Processes, 5 (N°2-3-4/2002), 445-455.
Peer reviewed

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Texture evolution during deep-drawing processes. Journal of Materials Processing Technology, 125-126, 110-118. doi:10.1016/S0924-0136(02)00331-X
Peer Reviewed verified by ORBi

Moureaux, P., Moto Mpong, S., Remy, M., Bouffioux, C., Lecomte-Beckers, J., & Habraken, A. (2002). Identification d'une loi thermo-élasto-viscoplastique en vue de la modélisation du laminage à chaud du cuivre. Journal de Physique IV, 102, 11-361-368. doi:10.1051/jp4:20020513
Peer reviewed

Drean, M., Habraken, A., Bouchaïr, A., & Muzeau, J.-P. (2002). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. Computers and Structures, 80, 2361-2373. doi:10.1016/S0045-7949(02)00240-7
Peer Reviewed verified by ORBi

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (December 2000). Modélisation des phénomènes thermomécaniques dans une lingotière de coulée continue. Mécanique and Industries, 1, 61-70. doi:10.1016/s1296-2139(00)00107-x
Peer Reviewed verified by ORBi

de Montleau, P., & Habraken, A. (2000). An Original integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering.
Peer Reviewed verified by ORBi

Mosbah, P., Shima, S., Habraken, A., & Charlier, R. (1999). Numerical simulation of compacting process of a multi-stepped part – Comparison with experiments. Journal of the Japan Society of Powder and Powder Metallurgy, 46, 696-704. doi:10.2497/jjspm.46.696
Peer reviewed

Drean, M., Habraken, A., Bouchair, A., & Muzeau, J.-P. (1999). Modélisation de la mise en oeuvre des boulons sertis précontraints. Construction Métallique, 4, 21-34.
Peer reviewed

Habraken, A., & Cescotto, S. (1998). Contact between deformable solids, the fully coupled approach. Mathematical and Computer Modelling, 28 (4-8), 153-169. doi:10.1016/S0895-7177(98)00115-0
Peer Reviewed verified by ORBi

Habraken, A., Charles, J.-F., Wegria, J., & Cescotto, S. (1998). Dynamic Recrystallization during Zinc Rolling. International Journal of Forming Processes, 1, 20.
Peer reviewed

Kaiping, L., Habraken, A., & Bruneel, H. (1995). Simulation of Square Cup Deep Drawing with Different Finite Elements. Journal of Materials Processing Technology, 50 (1-4), 81-91. doi:10.1016/0924-0136(94)01371-7
Peer Reviewed verified by ORBi

Zhu, Y. Y., Cescotto, S., & Habraken, A. (1992). A fully coupled elastoplastic damage modeling and fracture criteria in metalforming processes. Journal of Materials Processing Technology, 32, 197-204. doi:10.1016/0924-0136(92)90177-T
Peer Reviewed verified by ORBi

Habraken, A., & Bourdouxhe, M. (1992). Coupled thermo-mechanical-metallurgical analysis during the cooling of steel pieces. European Journal of Mechanics. A, Solids, 11 (3), 381-402.
Peer Reviewed verified by ORBi

Dyduch, M., Habraken, A., & Cescotto, S. (1992). Automatic adaptive remeshing for numerical simulations of metalforming. Computer Methods in Applied Mechanics and Engineering, 101, 283-293. doi:10.1016/0045-7825(92)90026-G
Peer Reviewed verified by ORBi

Cescotto, S., & Habraken, A. (1991). A note on the response to simple shear of elasto-plastic materials with isotropic hardening. European Journal of Mechanics. A, Solids, 10 (1), 1-13.
Peer Reviewed verified by ORBi

Habraken, A. (December 1990). An automatic remeshing processor. Journal of Materials Processing Technology, 24, 147-155. doi:10.1016/0924-0136(90)90177-V
Peer Reviewed verified by ORBi

Habraken, A., & Cescotto, S. (December 1990). An automatic remeshing technique for finite element simulation of forming processes. International Journal for Numerical Methods in Engineering, 30 (8), 1503-1525. doi:10.1002/nme.1620300811
Peer Reviewed verified by ORBi

Charlier, R., & Habraken, A. (1990). Numerical Modelisation of Contact with Friction Phenomena by the Finite Element Method. Computers and Geotechnics, 9 (n°1&2), 59-72.
Peer Reviewed verified by ORBi

Book reviews

Fonder, G., Charlier, R., Habraken, A., & Chantrain, P. (1986). Development of a Dynamic 3-D Nonlinear Computer Program. Convention Européenne de la Construction métallique, 28.
Peer reviewed

Articles accepted in conference proceedings

Betaieb, E., Duchene, L., & Habraken, A. (In press). Identification and validation of Brass material parameters using single point incremental forming. In TMS Proceedings. New York City, United States: Springer Link. doi:10.1007/978-3-031-06212-4_79
Peer reviewed

Delahaye, J., Habraken, A., & Mertens, A. (2023). 2D FE Modeling of the Thermal History of the Heat Affected Zone in AlSi10Mg LPBF. In L. Madej, M. Sitko, ... K. Perzynski (Eds.), Material Forming - The 26th International ESAFORM Conference on Material Forming , Esaform 2023 (pp. 189-198). Millersville, United States - Pennsylvania: Materials Research Forum. doi:10.21741/9781644902479-21
Peer reviewed

Duchene, L., Morch, H., Rojas Ulloa, C. E., Tuninetti Vásquez, V., & Habraken, A. (2023). Efficient thermo-mechanical modelling of cyclic loading with Chaboche type constitutive law coupled with damage. In K. Mocellin, Proceedings of ICTP 2023 (pp. 4, pages 284-294). Switzerland: Springer. doi:10.1007/978-3-031-42093-1_28
Peer reviewed

Oliveira, M. C., Cazacu, O., Revil-Baudard, B., Neto, D. M., Frohn-Sörensen, P., Ma, J., Liu, W., Cruz, D. J., Santos, A. D., VAN BAEL, A., Ghiabakloo, H., & Habraken, A. (2023). ESAFORM 2021 cup drawing benchmark of an Al alloy: Critical follow up analysis of its potentials. In L. Madej, M. Sitko, ... K. Perzynsk (Eds.), Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023 (pp. 1491-1502). Association of American Publishers. doi:10.21741/9781644902479-161
Peer reviewed

Pham Quy Duc, T., Hoang, T. V., Tran, X. V., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Uncertainty Quantification in the Directed Energy Deposition Process Using Deep Learning-Based Probabilistic Approach. In G. Vincze & F. Barlat (Eds.), Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Trans Tech Publications Ltd. doi:10.4028/p-j9chvq
Peer reviewed

Rojas-Ulloa, C., Valenzuela, M., Tuninetti, V., & Habraken, A. (06 May 2021). Identification and validation of an extended Stewart-Cazacu micromechanics damage model applied to Ti–6Al–4V specimens exhibiting positive stress triaxialities. Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Applications, 108 (2). doi:10.1177/14644207211009933
Peer Reviewed verified by ORBi

Vincze, G., & Habraken, A. (2021). EXACT - the ESAFORM Benchmark 2021. In A. Habraken, L. Duchene, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liege, Belgium: PoPuPs. doi:10.25518/esaform21.4783
Peer reviewed

Pham Quy Duc, T., Vinh Hoang, T., Tuan Pham, Q., Phuc Huynh, T., Xuan Tran, V., El Fetni, S., Tran, H. S., & Habraken, A. (2021). Data-driven Prediction of Temperature Evolution in Metallic Additive Manufacturing Process. In A. Habraken, L. Duchêne, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liege, Belgium: PoPuPs. doi:10.25518/esaform21.2599
Peer reviewed

El Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2021). Thermal field prediction in DED manufacturing process using Artificial Neural Network. In A. Habraken, L. Duchene, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2812
Peer reviewed

Dedry, O., Bouffioux, C., Tran, H. S., Santos Macías, J. G., Habraken, A., & Mertens, A. (2021). Identification of AlSi10Mg matrix behavior by nanoindentation. In 24th International Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2464
Peer reviewed

Mertens, A., Delahaye, J., Dedry, O., Vertruyen, B., Tchuindjang, J. T., & Habraken, A. (26 April 2020). Microstructure and properties of SLM AlSi10Mg: Understanding the influence of the local thermal history. Procedia Manufacturing, 47, 1089-1095. doi:10.1016/j.promfg.2020.04.121
Peer reviewed

Tran, H. S., Castiaux, E., & Habraken, A. (April 2020). Thermal Analysis of Solidifying Steel Shell in Continuous Casting Process. Procedia Manufacturing, 47, 686-692. doi:10.1016/j.promfg.2020.04.210
Peer reviewed

Tran, H. S., Castiaux, E., & Habraken, A. (2020). 2D thermal finite element analysis of sticker breakout in continuous casting. Procedia Manufacturing, 50, 376-383. doi:10.1016/j.promfg.2020.08.069
Peer reviewed

Yuan, S., Habraken, A., Milis, O., & Duchene, L. (2019). Study of High Purity Nickel with Various Grain Sizes Using Shear Tests. AIP Conference Proceedings. doi:10.1063/1.5112755
Peer Reviewed verified by ORBi

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Mertens, A., Habraken, A., & Tran, H. S. (2019). Numerical analysis of thermal stress in laser cladding technology of M4 High Speed Steel. In Y. Korkolis, B. Kinsey, M. Knezevic, ... Padhye, Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes.
Peer reviewed

Tuninetti, V., Flores, P., Medina, C., Duchene, L., & Habraken, A. (2019). Effect of small strain rate variations on the identification of the compressive behaviour of Ti6Al4V. In Proceedings of Giens 2019.
Peer reviewed

Betaieb, E., Yuan, S., Guzman, C. F., Duchene, L., & Habraken, A. (16 April 2019). Prediction of cracks within cones processed by single point incremental forming. Procedia Manufacturing, 29 (2019), 96-104. doi:10.1016/j.promfg.2019.02.111
Peer reviewed

Morch, H., Duchene, L., & Habraken, A. (August 2018). Identification method of an advanced constitutive law for nickel-based alloy Haynes 230 used in solar receivers. Journal of Physics. Conference Series, 1063. doi:10.1088/1742-6596/1063/1/012149
Peer Reviewed verified by ORBi

Yuan, S., Duchene, L., Milis, O., Keller, C., Hug, E., & Habraken, A. (July 2018). A Novel Geometry for Shear Test Using Axial Tensile Setup. Proceedings, 2. doi:10.3390/ICEM18-05277
Peer Reviewed verified by ORBi

Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. In Proceedings of the XIV International Conference on Computational Plasticity.
Peer reviewed

Tran, H. S., Tchuindjang, J. T., Hakan, P., Jardin, R., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. In Extended Abstract book of 14th Conf. on Computer Methods in Materials Technology KomPlasTech 2017.

Jardin, R., Hoang, S. T., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016). 2D and 3D FE models of laser cladding process. In Booklet of the conference with extended abstract and short paper of less than 6 pages.
Peer reviewed

Flipon, B., Lawrjaniec, D., Papeleux, L., Ponthot, J.-P., & Habraken, A. (2016). Numerical Simulations of a Two Roll Round Bar Straightener. In AIP Conference Proceedings 1769, 120001 (2016) (pp. 6). doi:10.1063/1.4963516
Peer reviewed

Hoang, S. T., Tummala, H., Duchene, L., Péron Luhrs, V., Fivel, M., & Habraken, A. (2015). Interaction between dislocation and coherent twin boundary by quasicontinuum model. In Proceedings of XIII International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS ebook open accesss XIII.
Peer reviewed

Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Determination of Stress and Strain Fields in Cast and Heat Treated Bimetallic Rolling Mill Rolls. In Proceedings of the Iron & Steel Technology Conference and Exposition (AISTech 2015 & ICSTI) (pp. 2706-2716).
Peer reviewed

Gilles, G., Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Modelling of stress field evolution in bimetallic rolling mill rolls during the manufacturing process. In Proceedings of the 5th Conference on rolling mill rolls for metals processing Rolls 5 2015.

Guzmán Inostroza, C. F., Tuninetti, V., Gilles, G., & Habraken, A. (April 2015). Assessment of damage and anisotropic plasticity models to predict Ti-6Al-4V behavior. Key Engineering Materials, 651-653, 575-580. doi:10.4028/www.scientific.net/KEM.651-653.575
Peer Reviewed verified by ORBi

Lemoine, X., Tudor, B., & Habraken, A. (2014). Numerical investigation of cut-edge effect using the Gurson-Tvergaard-Needleman model. Procedia Engineering. doi:10.1016/j.proeng.2014.10.067
Peer Reviewed verified by ORBi

Tchuindjang, J. T., Neira Torres, I., Habraken, A., Sinnaeve, M., & Lecomte-Beckers, J. (2014). Characterization of the Solidification Path, the Solid State Transformations and the Mechanical Behavior of a High Chromium Cast Steel. In T. Nylen (Other coll.), Proceedings of the 5th Abrasion Conference - 2014.

Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. In Incremental sheet forming.
Peer reviewed

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. In Incremental sheet forming.
Peer reviewed

marandi, K., vayrette, R., Pardoen, T., Duchene, L., & Habraken, A. (2013). Bauschinger effect in thin metallic films by Fem simulations. In XII International Conference on Computational Plasticity. Fundamentals and Application COMPLAS XII , Barcelone 3-5 septembre 2013.
Peer reviewed

Duchene, L., Ben Bettaieb, A., Tuninetti Vásquez, V., & Habraken, A. (2013). Numerical modeling and digital image correlation strain measurements of coated metal sheets submitted to large bending deformation. In Proceedings of the 16th ESAFORM conference on Material Forming.
Peer reviewed

Tuninetti Vásquez, V., Gilles, G., Milis, O., Neira Torres, I., & Habraken, A. (2013). QUASI-STATIC MECHANICAL BEHAVIOUR OF TI-6AL-4V ALLOY AT ROOM TEMPERATURE. Complas XII, XII, 51-62.
Peer reviewed

Gilles, G., Habraken, A., Cazacu, O., Balan, T., & Duchene, L. (2013). Experimental and numerical study of TA6V mechanical behavior under different quasi-static strain paths at room temperature. AIP Conference Proceedings, 1532, 651-656. doi:10.1063/1.4806890
Peer Reviewed verified by ORBi

Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., Sinnaeve, M., & Habraken, A. (2013). Prediction of residual stresses by FE simulations on bimetallic work rolls during cooling. Computer Methods in Materials Science, 13 (1), 84-91.
Peer reviewed

Tuninetti Vásquez, V., Gilles, G., Péron-Lührs, V., & Habraken, A. (2012). Compression test for metal characterization using digital image correlation and inverse modeling. Procedia IUTAM. doi:10.1016/j.piutam.2012.05.022
Peer Reviewed verified by ORBi

Lequesne, C., Pensis, O., Renard, M., Vanderheyden, S., & Habraken, A. (2011). Roller Pressure Quench Process of Steel Plate Modelling. In Proceedings of Esaform 2011.
Peer reviewed

Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156. doi:10.1063/1.3589507
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the efficiency of the Ti555 compared with TA6V alloy in the case of an aeronautic application. The 12th World Conference on Titanium Ti-2011.
Peer reviewed

Ben Bettaieb, A., Duchene, L., Zhang, L., & Habraken, A. (2011). New Solid-Shell Finite Element Based on EAS and ANS Concepts for Sheet Metal Forming. AIP Conference Proceedings, 1383, 374-381. doi:10.1063/1.3623634
Peer Reviewed verified by ORBi

Gilles, G., Tuninetti Vásquez, V., Ben Bettaieb, M., Cazacu, O., Habraken, A., & Duchene, L. (2011). Experimental characterization and constitutive modeling of TA6V mechanical behavior in plane strain state at room temperature. AIP Conference Proceedings, 1383. doi:10.1063/1.3623595
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the Efficiency of the Ti555 Compared with TA6V Alloy in the Case of an Aeronautic Application. In Proceedings of the 12th World Conference on Titanium (pp. 1969-1973).
Peer reviewed

Duchene, L., Ben Bettaieb, A., & Habraken, A. (2011). Assessment of the enhanced assumed strain (EAS) and the assumed natural strain (ANS) techniques in the mechanical behavior of the SSH3D solid-shell element. Complas XI.
Peer reviewed

Hammami, W., Tirry, W., Coghe, F., Duchene, L., Delannay, L., & Habraken, A. (2011). Ti6A14V Anisotropy and Texture Evolution Predictions Using Multisite and Self Consistent Crystal Plasticity Models. In Proceedings of the 12th World conference on Titanium (pp. 950-953).
Peer reviewed

Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (June 2010). Modeling the vertical spincasting of large bimetallic rolling mill rolls. Key Engineering Materials, 443, 15-20. doi:10.4028/www.scientific.net/KEM.443.15
Peer Reviewed verified by ORBi

Zhang, L., Ben Bettaieb, A., Habraken, A., & Duchene, L. (April 2010). Temperature wrinkling prediction in metal/polymer multilayer coatings. International Journal of Material Forming, 3 (supplement 1), 559-562. doi:10.1007/s12289-010-0831-z
Peer Reviewed verified by ORBi

Keller, C., Afteni, M., Banu, M., & Habraken, A. (2010). Influence of Surface Effect on Nickel Micro Deep Drawing Process. In NUMIFORM 2010, VOLS 1 AND 2 (pp. 1025-1030).
Peer reviewed

Marmi, A., Habraken, A., & Duchene, L. (2010). Multiaxial fatigue damage modeling of Ti6Al4V alloy. In Proceedings of the ICMFF9 Conference.
Peer reviewed

Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. In Proceedings of the Advances in Materials and Processing Technologies Conference.
Peer reviewed

Keller, C., Habraken, A., Hug, E., & Duchene, L. (2010). Miniaturization induced size effects: Experimental and numerical investigation of size effects linked to the miniaturization of metallic components. In Scale transition for plastic crystalline and microstructured materials: from experiment to numerical modeling.
Peer reviewed

Van Hoof, T., Ben Bettaieb, M., Lani, F., Dufour, P., Jacques, P., Lenain, A., & Habraken, A. (2010). Comparison of mechanical efficiency of two microstructures of Ti5553 alloy in the case of bolted flanges submitted to tensile loading. Steel Research International, 81 (9), 1148-1152.
Peer Reviewed verified by ORBi

Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., & Duchene, L. (2010). Influence of Surface Effect On Nickel Micro Deep Drawing Process. In Proceeding of the Numiform 2010 conference (pp. 1025-1030). American Institute of Physics.
Peer reviewed

Gilles, G., Habraken, A., & Duchene, L. (2010). Material parameter identification of Cazacu's model for Ti6Al4V using the simulated annealing algorithm. Materials Science Forum, 636-637, 1125-1130. doi:10.4028/www.scientific.net/MSF.636-637.1125
Peer reviewed

Bouffioux, C., Pouteau, P., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Material data identification to model the single point incremental forming process. International Journal of Material Forming, 3 (Suppl. 1), 979-982. doi:10.1007/s12289-010-0933-7
Peer Reviewed verified by ORBi

Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). The Role of Void Evolution on the bendability of Steel Sheets. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed

Hammami, W., Bouvier, S., Duchene, L., Delannay, L., & Habraken, A. (2009). Crystal Plasticity Modelling of Monotonic Shear Tests on Pure Titanium. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed

Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (August 2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2 (Supplément 1), 65 - 68. doi:10.1007/s12289-009-0573-y
Peer Reviewed verified by ORBi

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). Study of the formability of steels. In Proceedings of the International ESAFORM Conference 2009.
Peer reviewed

Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (2009). Modeling the Vertical Spincasting of Large Bimetallic Rolling Mill Rolls. In J. Ambrosio (Ed.), Proceedings of the 7th EUROMECH Solid Mechanics Conference.
Peer reviewed

El Bartali, A., Zhang, L., Studer, L., & Habraken, A. (2009). Validation d'un calcul thermique métallurgique. In B. Appolaire, S. Arbab Chirani, S. Calloch, S. Denis, M. Leal, ... M. Tailleur (Eds.), Mécanique et mécanismes des changements de phases (pp. 254 - 258).
Peer reviewed

Bouffioux, C., Eyckens, P., Henrard, C., Aerens, R., Van Bael, A., Sol, H., & Habraken, A. (2008). Identification of material parameters to predict Single Point Incremental Forming forces. International Journal of Material Forming. doi:10.1007/s12289-008-0183-0
Peer Reviewed verified by ORBi

Verbert, J., Belkassem, B., Henrard, C., Habraken, A., Gu, J., Sol, H., & Duflou, J. R. (2008). Multi-Step toolpath approach to overcome forming limitations in single point incremental forming. In P. Boisse, Proceedings of the 11th International ESAFORM Conference on Material Forming (pp. 587-590). Springer. doi:10.1007/s12289-008-0157-2
Peer reviewed

Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H. Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH.
Peer reviewed

Habraken, A., Gerday, A.-F., & Duchene, L. (2008). Multiscale finite element study of Ti-555. In Akhtar S. Khan, Babak Farrokh, M. Baig, A. Pandey, C. Meredith, S. Yu, ... H. Liu (Eds.), Proceedings of the 14th International Symposium on Plasticity & Its Current Applications, Mechanics & Mechanisms of Finite Plastic Deformation (pp. 265-267). Neat Press.
Peer reviewed

Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N. Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144).
Peer reviewed

Duchene, L., Geers, M. G. D., Brekelmans, W. A. M., Chen, E., Verlinden, B., & Habraken, A. (2008). Multiscale modeling of equal channel angular extruded aluminium with strain gradient crystal plasticity and phenomenological models. In A. Rollett (Ed.), Proceedings of the 15th International Conference on the Texture of Materials (ICOTOM-15).
Peer reviewed

Studer, L., Detrembleur, S., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2008). Modelling the vertical spincasting of large bimettalic rolling mill rolls. In Proceedings of the Second International Conference on Advances in Solidification Processes (ICASP-2).
Peer reviewed

Studer, L., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2007). Modelling the vertical centrifugal casting of large bimetallic rolling mills. In E. Onate, M. Papadrakis, ... B. Schrefler (Eds.), Proceedings of the Conference of Computational Methods for Coupled Problems in Science and Engineering 2 (pp. 141-144). Barcelona, Spain: CIMNE.
Peer reviewed

Van Bael, A., Eyckens, P., He, S., Bouffioux, C., Henrard, C., Habraken, A., Duflou, J., & Van Houtte, P. (2007). Forming limit predictions for single-point incremental sheet metal forming. In E. Cueto & F. Chinesta, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 309-314). Springer.
Peer reviewed

Bouvier, S., Alves, L., & Habraken, A. (2007). Strategy of material parameters identification for non linear mechanical behavior: sensitivity of FE computation. In E. Cueto & C. Francisco, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 94-99). doi:10.1063/1.2729494
Peer reviewed

Lelotte, T., Rossi, B., & Habraken, A. (2007). Micro and macro investigation on the hardening of a titanium alloy. In 11th World conference on titanium: Ti 2007, Kyoto 3-7 June 2007 (pp. 415-419).
Peer reviewed

Duchene, L., Diouf, B., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2007). Study of axes rotation during simple shear tests on aluminium sheets. In J. M. A. César de Sa & A. D. Santos (Eds.), Proceedings of the 9th International Conference NUMIFORM 2007 (AIP Conference Proceedings 908, pp. 399-404).
Peer reviewed

Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2007). Inverse modelling of nanoindentation tests to identify Ti-555 behaviour. In Proceedings of the 11th world conference on titanium. Japan Institute of Metals.
Peer reviewed

Habraken, A., Gerday, A.-F., Diouf, B., & Duchene, L. (2007). Comparisons of FEM approaches modelling the metal plastic behaviour. In E. Cueto & F. Chinesta, Proceedings of the 10th ESAFORM Conference on Material Forming (pp. 1478-1483). Springer. doi:10.1063/1.2729724
Peer reviewed

Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M. Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference.
Peer reviewed

Rossi, B., Habraken, A., & Pascon, F. (2007). On the evaluation of the through thickness residual stresses distribution of cold formed profiles. In 10th International ESAFORM Conference on Material Forming : ESAFORM, Zaragoza, 18-20 April 2007 (pp. 570-577).
Peer reviewed

Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D. Santos & A. Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).
Peer reviewed

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Comparison between homogeneous and heterogeneous field information for plastic material identification. In M. Grédiac & J. Huntley (Eds.), Proceedings of Photomecanics Conference 2006 (pp. 71-72).
Peer reviewed

Lelotte, T., Delannay, L., & Habraken, A. (2006). Prediction of deformation textures in zirconium based on a simplified modelling of grain interaction. In A. S. Khan (Ed.), Proceedings of the Plasticity Conference 2006. NEAT Press.
Peer reviewed

Rosso, V., Zhang, L., Michel, F., Renotte, Y., Lion, Y., & Habraken, A. (2006). Out-of-plane displacement derivative measurement: comparison of results obtained by a shearographic interferometer using the separation of the polarization states and the finite element method. In P. Mathieu (Ed.), Proceedings of Photonics North Conference 2006.
Peer reviewed

Flores, P., & Habraken, A. (2006). Caracterizacion del comportamiento elasto-plastico de placas metalicas.
Peer reviewed

Duchene, L., de Montleau, P., & Habraken, A. (2006). Development and performance assessment of an improved 8-node mixed type FEM element. In N. Juster & A. Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 135-138). Krakow, Poland: Akapit.
Peer reviewed

Poortmans, S., El Houdaigui, F., Habraken, A., & Verlinden, B. (2006). Inhomogeneous and anisotropic deformation behavior and strain hardening of ultrafine-grained aluminium by ECAP. In Y. T. Zhu, T. G. Langdon, Z. Horita, M. J. Zehetbauer, S. L. Semiatin, ... T. C. Lowe (Eds.), Proceedings of the Ultrafine Grained Materials IV Conference (pp. 389-394). London, United Kingdom: Academic Press.
Peer reviewed

Gerday, A.-F., Clement, N., Jacques, P. J., Pardoen, T., & Habraken, A. (2006). Finite element simulations of nanoindentation in beta metastable Ti alloys. In N. Juster & A. Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 187-190). Krakow, Poland: Akapit.
Peer reviewed

Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., Rabet, L., & Habraken, A. (2006). Identification of yield locus parameters of metals using inverse modeling and full field DIC. In Proceedings of the 7th national congress on theoretical and applied mechanics.
Peer reviewed

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2006). Analysis of speckle patterns for deformation measurements by DIC. In P. Slangen & C. Cerruti (Eds.), Proceedings of SPIE Vol. 6341 (pp. 1-E6).
Peer reviewed

Lequesne, C., Plumier, A., Degée, H., & Habraken, A. (2006). Numerical study of the fatigue crack in welded beam-to-column connection using cohesive zone model. In Proceedings of the International Conference on Fracture and Damage Mechanics V (pp. 847-850). Uetikon-Zuerich, Switzerland: Trans Tech Publications.
Peer reviewed

Diouf, B., El Houdaigui, F., Poortmans, S., Verlinden, B., & Habraken, A. (2006). A phenomenological model to simulate mechanical tests on ultrafine-grained aluminium produced by ECAE. In C. A. Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dordrecht, Netherlands: Springer.
Peer reviewed

Lecompte, D., Cooreman, S., Sol, H., Vantomme, J., & Habraken, A. (2006). Identification of hardening behavior using inverse modeling and image correlation. In Proceedings of the SEM annual conference and exposition 2006.
Peer reviewed

Lelotte, T., Duchene, L., & Habraken, A. (2006). Fast method to predict an earing profile based on Lankford coefficients and yield locus. In C. A. Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dodrecht, Netherlands: Springer.
Peer reviewed

El Houdaigui, F., Duchene, L., Habraken, A., Poortmans, S., & Verlinden, B. (2005). Anisotropic yield locus of ultrafine-grained aluminium produced by Equal Channel angular extrusion. In E. Onate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII) (pp. 1170-1173).
Peer reviewed

He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., Henrard, C., Bouffioux, C., & Habraken, A. (2005). Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 711-714). The publishing House of the Romanian Academy.
Peer reviewed

Lecompte, D., Sol, H., Vantomme, J., & Habraken, A. (2005). Identification of elastic orthotropic material parameters by inverse modeling using ESPI. In Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental and Applied Mechanics.
Peer reviewed

Watzeels, K., Tunckol, Y., Henrard, C., Gu, J., Sol, H., Duflou, J., & Habraken, A. (2005). Experimental validation of the finite element simulation of the first stroke in single point incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 703-706). The publishing House of the Romanian Academy.
Peer reviewed

Casotto, S., Bruschi, S., Pascon, F., & Habraken, A. (2005). Development of a neural network to predict the final geometry of forged rings after cooling. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 2) (pp. 855-858). The publishing House of the Romanian Academy.
Peer reviewed

Flores, P., Moureaux, P., & Habraken, A. (2005). Material Identification Using a Bi-Axial Test Machine. In Proceedings of the International Conference on Advances in Experimental Mechanics.
Peer reviewed

Lelotte, T., Gerday, A.-F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A., & Duchene, L. (2005). Axes rotation during simple shear test: Measurement and predictions. In E. Oñate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII).
Peer reviewed

Duchene, L., de Montleau, P., El Houdaigui, F., Bouvier, S., & Habraken, A. (2005). Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology, NUMISHEET 2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Conference proceedings, Vol 778, pp. 409-414). Melville (New York), United States: American Institue of Physics (AIP).
Peer reviewed

Duchene, L., El Houdaigui, F., & Habraken, A. (2005). Finite element simulations of the swift effect. In P. F. Bariani (Ed.), Proceedings of the ICTP 2005 International Conference on Technology of Plasticity.
Peer reviewed

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D. Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Romania: The publishing House of the Romanian Academy.
Peer reviewed

Castagne, S., & Habraken, A. (2005). Identification of the parameters of a damage constitutive law for steel at elevated temperature. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 29-32). The publishing House of the Romanian Academy.
Peer reviewed

Lequesne, C., Plumier, A., & Habraken, A. (2005). Modélisation de la fissuration par fatigue des connexions poutres-colonnes de grands bâtiments en armature en acier lors de tremblements de terre. In Proceedings of the XVIIème congrès français de mécanique (CFM 2005).
Peer reviewed

Lequesne, C., Gerday, A.-F., Plumier, A., & Habraken, A. (2005). Modeling of the fatigue cracks in welded beam-to-column connection of steel moment frame buildings submitted to earthquake. In M. H. Aliabadi, J. Planas, F.-G. Buchholz, B. Abersek, J. Alfaiate, ... S. I. Nishida (Eds.), Proceedings of the 4th International Conference on Fracture and Damage Mechanics (pp. 233-238).
Peer reviewed

Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy.
Peer reviewed

Pascon, F., Pecquet, E., Zhang, L., & Habraken, A. (2005). Modelling of semi-continuous casting of cupro-nickel alloys. In M. Papadrakakis, E. Onate, ... B. Schrefler (Eds.), Proceedings of the International Conference on Computational Methods for Coupled Problems in Science and Engineering.
Peer reviewed

Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), United States: American Institute of Physics (AIP).
Peer reviewed

Duchene, L., de Montleau, P., Bouvier, S., & Habraken, A. (2004). Deep drawing simulations with different polycrystalline models. In S. Gosh, J. M. Castro, ... J. K. Lee (Eds.), Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 588-593). American Institute of Physics AIP Conference Proceedings.
Peer reviewed

de Montleau, P., Duchene, L., Bouvier, S., Flores, P., & Habraken, A. (2004). Deep drawing process with different elasto-plastic law. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Material Forming (pp. 163-166). Norwegian University of Sciences and Technology.
Peer reviewed

Mathonet, V., Degée, H., Habraken, A., Tossings, P., & Delhez, E. (2004). Structural optimisation of steel frames for industrial applications. In Proceedings of the Inverse Problems Design and Optimization Symposium.
Peer reviewed

Pecquet, E., Volles, R., Lecomte-Beckers, J., & Habraken, A. (2004). Lingopti project: semi-continuous casting process of copper-nickel alloys. In Proceedings of the 21st International Congress of Theoritical and Applied Mechanics.
Peer reviewed

Flores, P., de Montleau, P., Mathonet, V., Moureaux, P., & Habraken, A. (2004). Identification of material parameters using bi-axial machine. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 237-240). Norwegian University of Sciences and Technology.
Peer reviewed

Duchene, L., Delannay, L., & Habraken, A. (2004). Finite element prediction of the swift effect based on Taylor-type polycrystal plasticity models. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 171-174). Norwegian University of Sciences and Technology.
Peer reviewed

Van Bael, A., He, S., Van Houtte, P., Delannay, L., Duchene, L., & Habraken, A. (2004). Finite-element simulations of cup drawing using the taylor and the lamel model. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 215-218). Norwegian University of Sciences and Technology.
Peer reviewed

Castagne, S., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2004). Mesoscopic model of intergranular cracks in low carbon steel during cooling of continuous casting. In M. Lamberigts, Proceedings of the 2nd international conference of thermomechanical processing of steels (TMP 2004) (pp. 233-240). Liège, Belgium: Stahl Eisen.
Peer reviewed

Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S. Gosh, J. M. Castro, ... J. K. Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings.
Peer reviewed

Jeunechamps, P.-P., Walmag, J., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model in large deformation problems. In C. Cinquini (Ed.), Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization WCSMO5.
Peer reviewed

Castagne, S., & Habraken, A. (2003). Investigation of transverse cracks initiation in continuous steel casting using a finite element approach. In Advances in Computational & Experimental Engineering. C.A. He & Sciences.
Peer reviewed

de Montleau, P., Duchene, L., Flores, P., & Habraken, A. (2003). Numerical shear tests for different elasto-plastic laws. In E. Onate & D. R. J. Owen, Proceedings of the VII International Conference on Computational Plasticity (COMPLAS 2003). Barcelona, Spain: CIMNE.
Peer reviewed

Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E. Dick, J. Vierendeels, F. Cantrijn, G. Campion, ... C. Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics.
Peer reviewed

Flores, P., De Montleau, P., Habraken, A., & Mathonet, V. (2003). Simulations numériques d'essais de cisaillement simple. In 16ème Congrès fançais de Mécanique.
Peer reviewed

Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. In Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.
Peer reviewed

Castagne, S., Pascon, F., Bles, G., & Habraken, A. (2003). Developments in finite element simulations of continuous casting. In Proceedings of the 2nd International Conference on Thermal Process Modelling and Computer Simulations (ICTPMCS).
Peer reviewed

Pascon, F., & Habraken, A. (2003). 2D1/2 thermo-mechanical model of continuous casting using FEM. In V. Brucato (Ed.), Proceedings of the 6th International ESAFORM Conference on Material Forming. Nuova Ipsa editore.
Peer reviewed

Castagne, S., Pascon, F., Miesse, G., & Habraken, A. (2003). Finite element analysis of continuous steel casting. In Proceedings of the First International Conference Finite element for process analysis.
Peer reviewed

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2003). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. Journal de Physique IV, 105. doi:10.1051/jp4:20030191
Peer reviewed

Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P. Iu, L. N. Lamas, Y. P. Li, ... K. M. Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse, Netherlands: Swets & Zeitlinger.
Peer reviewed

Pietrapertosa, C., Zhang, L., Habraken, A., & Jaspart, J.-P. (2003). Clinching joining system: validation of numerical models. In V. Brucato, Proceedings of the 6th International ESAFORM Conference on Material Forming (pp. 351-354). Salerno, Italy: Nuova Ipsa editire.
Peer reviewed

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. In S. Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6) Non Linear Mechanics of Anisotropic Materials (pp. 337-344).
Peer reviewed

Hubsch, P., Bourdouxhe, M., Pascon, F., & Habraken, A. (2002). Numerical simulation of the solidification of a beam blank in the mould. In Proceedings of the 4th European Continuous Casting Conference (pp. 421-428). Birmingham, United States - Alabama: IOM Communications.
Peer reviewed

Flores, P., Duchene, L., & Habraken, A. (2002). Texture analysis of cylindrical cup during deep-drawing process. In D. Y. Yang, S. I. Oh, H. Huh, ... Y. H. Kim, Proceedings of the 5th international conference NUMISHEET 2002 (pp. 605-610).
Peer reviewed

Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). A parallel computing model for the acceleration of a finite element software. In H. R. Arabnia, Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications (pp. 185-191). CSREA Press.
Peer reviewed

Pascon, F., & Habraken, A. (2002). Finite element thermo-mechanical model of continuous steel casting. In M. Kiuchi, H. Nishimura, ... J. Yanagimoto, Proceedings of the 7th International Conference on Advanced Technology of Plasticity.
Peer reviewed

Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). Acceleration of finite element analysis by parallel processing. In M. Pietrzyk, Z. Mitura, ... J. Kaczmar (Eds.), Proceedings of the 5th international ESAFORM Conference on Material Forming (pp. 47-50). Kraków, Poland: Akapit.
Peer reviewed

Duchene, L., Habraken, A., & Godinas, A. (2001). Influence of steel anisotropy during deep-drawing process. In A. Habraken, Proceedings of the 4th international Conference ESAFORM (pp. 461-464).
Peer reviewed

Duchene, L., Habraken, A., & Godinas, A. (2001). Implementation of a texture based interpolated yield locus in a FEM code. In Balkema, Proceedings of NUMIFORM 2001 (Simulation of Materials Processing: Theory, Methods and Applications) (pp. 203-208). Tokyo, Japan: Mori Editor.
Peer reviewed

Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Micro-mechanical analysis of steel sheet behaviour during deep-drawing. In Proceedings of the First Asian-Pacific Congress on Computational Mechanics: APCOM 2001.
Peer reviewed

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modeling of thermo-mechanical behaviour of a steel strand in continuous casting. In A. Habraken, Proceedings of the 4th International Conference ESAFORM (pp. 867-870).
Peer reviewed

Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Modelling of the micro-mechanical behaviour of steel sheets during deep-drawing. In J. R. Duflou, M. Geiger, H. J. J. Kals, B. Shirvani, ... U. P. Singh, Proceedings of the 9th International Conference on Sheet Metal (pp. 631-638).
Peer reviewed

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modelling of thermo-mechanical behaviour of a steel strand in continuous casting. In Proceedings of the 7th European Conference on Advanced Materials and processes (Euromat 2001).
Peer reviewed

Castagne, S., Charles, J.-F., Habraken, A., Zhang, L., Gaspard, M., & Batazzi, D. (2000). Numerical Modelling of the Forging Process of Rolls for Rolling Mills. In Proceedings of the 2nd International Conference on forging and related technology.
Peer reviewed

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermo-mechanical model of a strand in the mould of a continuous casting plant. In Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000) (pp. 15).
Peer reviewed

Habraken, A., Zhang, L., Wang, X. C., & Cescotto, S. (2000). A new elastic-visco-plastic damage model for annealed aluminium: theory, calibration and validation. In A. Benallal, Proceedings of the Continuous Damage and Fracture Symposium (pp. 341-352). France: Elsevier.
Peer reviewed

Duchene, L., Habraken, A., & Godinas, A. (2000). Validation of a FEM model coupled with texture applied to deep drawing process. In Proceedings of the 3rd ESAFORM Conference on Material Forming (pp. 3 à IV-6). Stuttgart, Germany: Frits Editor.
Peer reviewed

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials. In J. L. Tassoulas (Ed.), Proceedings of the 14th Engineering Mechanics Conference (pp. 6).
Peer reviewed

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials [Paper presentation]. 3rd ESAFORM Conference on Material Forming, Stuttgart, Germany.
Peer reviewed

Castagne, S., & Habraken, A. (2000). Development of a microscopic damage model for steel at high temperature. In Proceedings of the 5ème congrès national belge, Mécanique théorique et appliquée (pp. 175-178).
Peer reviewed

Charles, J.-F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. In M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, ... I. Pillinger, Proceedings of the 8th International Conference on Metal Forming (pp. 625-631).
Peer reviewed

Charles, J. F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. In Proceedings of the 5ème Congrès national belge, Mecanique théorique et appliquée (pp. 243-246).
Peer reviewed

Dréan, M., Habraken, A., Bouchaïr, A., & Muzeau, J. P. (2000). Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. In M. Iványi, J.-P. Muzeau, ... B. H. V. Topping, Computational Steel Structures Technology (pp. 87-97). Edinburgh, United Kingdom: CIVIL-COMP LTD.
Peer reviewed

Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermomechanical model of the behaviour of a strand in continuous steel casting using finite element method. In Proceedings of the 5ème Congrès national belge, Mécanique théorique et appliquée (pp. 239-242).
Peer reviewed

Duchene, L., Godinas, A., & Habraken, A. (1999). Texture effects on steel sheet behaviour under large strain simulations. In 12th International Conference on Texture of Materials (ICOTOM12).
Peer reviewed

Duchene, L., Godinas, A., & Habraken, A. (1999). Metal plastic behaviour linked to texture analysis and FEM method. In 4th International Conference NUMISHEET 1999.
Peer reviewed

Duchene, L., Habraken, A., & Cescotto, S. (1999). Elastoplastic anisotropic model based on texture analysis to simulate steel sheet behavior. In 7th International Symposium on Plasticity.
Peer reviewed

Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1999). Integration of recrystallisation model coupled with an elasto-visco-plastic law - Experimental tests and calibration of this model. In Proceedings of the 2nd ESAFORM Conference on Material Forming (pp. 529-532).
Peer reviewed

Habraken, A., Radu, J.-P., Duchene, L., Wauters, M., & Munhoven, S. (1998). Comparisons of anisotropic elastoplastic laws applied to steel sheet. In International Conference NUMIFORM 1998.
Peer reviewed

Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1998). Modeling of elasto-viscoplastic behaviour of steels at high temperatures. In Baajens & Huetink (Ed.), Proceedings of Simulation of Materials Processing, Methods and Applications. Esaform (pp. 57-60). Rotterdam, Netherlands: Balkema.
Peer reviewed

Charles, J.-F., Habraken, A., & Lecomte-Beckers, J. (1998). An elasto-viscoplastic model for forging steel at high temperatures. In Proceedings of NUMIFORM 98, Simulation of Materials Processing : Theory, Methods and Applications (pp. 277-282). Balkema, Enschede, Netherlands: Huetink, Baaijens.
Peer reviewed

Mosbah, P., Bouvard, D., Habraken, A., & Charlier, R. (1997). Modelling of Compression and Ejection of Metal Powder: Comparison of Analytical and Numerical Methods. In Proc. of the European Conference on Advances in Structural PM Component Production.
Peer reviewed

Wang, X. C., & Habraken, A. (October 1996). An Elastic-visco-plastic Damage Model: from Theory to Application. Journal de Physique IV, 6, 549-558. doi:10.1051/jp4:1996655
Peer reviewed

Habraken, A., Zhu, Y. Y., Charlier, R., & Wang, X. C. (1995). A damage model for elastoviscoplastic materials at large strains. In Proc. of the Int. Conf. on Computational Plasticity, Fundamentals and Applications, COMPLAS.
Peer reviewed

Bille, J. P., Cescotto, S., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. In 2nd Contact Mechanics Int. Symp., CMIS.
Peer reviewed

Argento, C., Bouvard, D., Stutz, P., Charlier, R., & Habraken, A. (1994). Numerical Simulation of Hot Isostatic Pressing of Metal Powder: Influence of Constitutive Equations. In Acte du Powder Metallurgy World Congress.
Peer reviewed

Bille, J. P., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. In Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed

Habraken, A., Radu, J.-P., & Charlier, R. (1992). Numerical approach of contact with friction between two bodies in large deformations. In Proc. of the Contact Mechanics Int. Symp.
Peer reviewed

Zhu, Y. Y., Cescotto, S., & Habraken, A. (1992). A fully coupled elastoplastic damage theory based on the energy equivalence. In D. R. J. Owen, E. Onate, ... E. Hinton, Computational Plasticity, Fundamentals and Applications (pp. 1455-1466). Swansea, United Kingdom: Pineridge Press.
Peer reviewed

Dyduch, M., Habraken, A., & Cescotto, S. (1991). A variable density grid generation for automatic remeshing processor in 2D metalforming simulations. In A. S. Arcilla, J. Häuser, P. R. Eiseman, ... J. F. Thompson, Numerical Grid Generation in Computational Fluid Dynamics and Related Fields (pp. 429-440).
Peer reviewed

Dyduch, M., & Habraken, A. (1991). Automatic adaptive remeshing for numerical simulation of forging. In Actes de la Conférence européenne sur les nouvelles avancées en calcul des structures.
Peer reviewed

Habraken, A., & Bourdouxhe, M. (1990). Modelling of the cooling of steel pieces. In Wrobel, Brebbia, ... Nowak, Advanced Computational Method in Heat Transfer, Vol. 3 - Phase Change and Combustion simulation. Proceedings of the First International Conference (pp. 469-479). Boston, United States - Massachusetts: Computation Mechanics Publication Southampton.
Peer reviewed

Cescotto, S., Habraken, A., Radu, J.-P., & Charlier, R. (1989). Some recent developments in computer simulation of metal forming processes. In Proc. of the 9th Int. Conf. on Computer Methods in Mechanics, Vol. 4.
Peer reviewed

Habraken, A. (1989). Coupled Thermomechanical Analysis with Microstructural Computation of Steel Pieces. In E. G. Thompson, R. D. Wood, O. C. Zienkiewicz, ... A. Samuelsson, Proceedings of NUMIFORM 89 Numerical Method in Industrial Forming Processes (pp. 165-170). A. A. Balkema.
Peer reviewed

Habraken, A., & Radu, J.-P. (1989). Simulation of forging applications with the finite element method. In E. G. Thompson, R. D. Wood, O. C. Zienkiewicz, ... A. Samuelsson, Proceedings of NUMIFORM 89 Numerical Method in Industrial Forming Processes (pp. 543-548). A. A. Balkema.
Peer reviewed

Habraken, A., Bourdouxhe, M., & Denis, S. (1988). Generation on Internal and Residual Stresses in Steel Workpieces during cooling. In G. Beck, S. Denis, ... A. Simon, International Conference on Residual Stresses: ICRS 2 (pp. 593-599).
Peer reviewed

Cescotto, S., Grober, H., Charlier, R., & Habraken, A. (1987). Prévision des défauts de géométrie au cours du laminage à chaud des aciers. In Proc. de la Conf. Int. sur les Méthodes de calculs pour la Prévision des Défauts de Mise en Forme.
Peer reviewed

Cescotto, S., Charlier, R., & Habraken, A. (1987). Simulation du formage des métaux par éléments finis. In 1er Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed

Charlier, R., & Habraken, A. (1986). On the modelling of tridimensional contact with friction problems in context of large displacements problems. In Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed

Habraken, A., & Charlier, R. (1986). A three-dimensional finite element for the simulation of metal forming processes. In Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed

Grober, H., Cescotto, S., Charlier, R., Bourdouxhe, M., & Habraken, A. (1985). Numerical simulation of metal forming processes. In Proc. Int. Conf. on Nonlinear Mechanics.
Peer reviewed

Oral presentations in conferences with scientific selection committee

Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal.
Peer reviewed

Tran Hoang, S., Bouffioux, C., Dedry, O., Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (04 April 2022). Prediction of static properties of LPBFAlSi10Mg samples post-treated by Friction Stir Processing or thermal treatments [Paper presentation]. EMMC18 – 18th European Mechanics of Materials Conference.
Peer reviewed

El Fetni, S., Habraken, A., Mertens, A., & Tchuindjang, J. T. (April 2022). Prediction of Phase-transformations of Ti6Al4V additively manufactured during Directed Energy Deposition [Paper presentation]. 18th European Mechanics of Materials Conference.
Editorial reviewed

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (28 February 2022). Adaptive time stepping approach for Phase-Field modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021 - XVI International Conference on Computational Plasticity, Barcelone, Spain. doi:10.23967/complas.2021.009
Peer reviewed

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (07 September 2021). Presentation: Adaptive time stepping approach for Phase-F1ield modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021, Barcelona, Spain.
Peer reviewed

Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (03 June 2021). How finite element simulations and phase field method interact to predict material properties of additive manufacturing samples [Paper presentation]. Sixth International Conference on Research in Intelligent Computing in Engineering (RICE-2021), Online, Vietnam.
Peer reviewed

Delahaye, J., Mertens, A., & Habraken, A. (21 April 2021). Investigation of out-of-equilibrium thermo-physical properties of AlSi10Mg processed by LPBF through modeling and experiment [Paper presentation]. ESAFORM 2021 - 24th International Conference on Material Forming, Liège, Belgium.
Peer reviewed

Tchuindjang, J. T., Dedry, O., Paydas, H., Jardin, R. T., Carrus, R., Habraken, A., & Mertens, A. (2021). Micromechanical assessment and thermophysical characterization of HSS M4 deposits processed by Laser Metal Deposition, - a prerequisite to the validation of a thermomechanical model [Paper presentation]. Thermec 2021.
Peer reviewed

Dedry, O., Delahaye, J., Vertruyen, B., Habraken, A., Tchuindjang, J. T., & Mertens, A. (2021). Thermal and microstructural characterizations of AlSi10Mg samples processed by Selective Laser Melting using two different preheating temperatures [Paper presentation]. Thermec 2021.
Peer reviewed

Delahaye, J., Vertruyen, B., Mertens, A., & Habraken, A. (28 October 2020). Phase-Field Simulations of Coarsening Kinetics of Si Precipitates in AlSi10Mg Processed by Selective Laser Melting [Paper presentation]. 17th International Conference on Aluminium Alloys, Grenoble, France.
Peer reviewed

Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Lecomte-Beckers, J., Carrus, R., Habraken, A., & Mertens, A. (12 July 2018). High Temperature Wear Behaviour of High Speed Steel Thick Deposits Obtained by Laser Cladding [Paper presentation]. Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France.
Peer reviewed

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Mertens, A., & Habraken, A. (12 July 2018). Modelling the Laser Cladding Process of M4 High Speed Steel [Paper presentation]. International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Paris, France.
Peer reviewed

Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (July 2018). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties [Paper presentation]. THERMEC’2018 - INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS.
Peer reviewed

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (25 April 2018). 2D FE Simulations of High Speed Steel Laser Cladding Process [Paper presentation]. ESAFORM, Palermo, Italy.
Peer reviewed

Tran, H. S., Tchuindjang, J. T., Paydas, H., Tomé Jardin, R. A., Carrus, R., Mertens, A., & Habraken, A. (28 March 2018). Predicted microstructure in repair technology of Ti-6Al-4V [Paper presentation]. 16th edition of the European Mechanics of Material Conference, Nantes, France.
Peer reviewed

Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (04 January 2018). Laser Clad High Speed Steel thick deposits: Correlations between the local thermal history, the microstructures and the wear mechanisms [Paper presentation]. International Conference on Plasticity, Damage and Fracture 2018, San Juan, Puerto Rico.
Peer reviewed

Hashemi, S. N., Gilles, G., Tomé Jardin, R. A., Tran, H. S., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (23 October 2015). 2D Thermal model of powder injection laser cladding of high speed steels (HSS) [Paper presentation]. European Mechanics Society (EUROMECH).
Peer reviewed

Contact ORBi