Maurizi-Enrici, T., Mario, D., Dedry, O., Castagne, S., Mertens, A., & Tchuindjang, J. T. (2023). Unveiling the complex wear sequence of a directed energy deposited 316L+WC hierarchical composite against alumina. Journal of Materials Research and Technology. doi:10.1016/j.jmrt.2023.07.172 Peer Reviewed verified by ORBi |
Maurizi-Enrici, T., Saggionetto, E., Dedry, O., Boschini, F., Tchuindjang, J. T., & Mertens, A. (13 September 2022). High-silicon austenitic stainless steels obtained by laser cladding: elaboration, microstructure and local properties [Paper presentation]. Alloys for Additive Manufacturing Symposium 2022, Munich, Germany. Peer reviewed |
Maurizi-Enrici, T. (2022). Development, metallurgical and tribological characterization of complex alloys and metal matrix composites obtained from manufacturing processes under non-equilibrium conditions [Doctoral thesis, Tommaso Maurizi Enrici]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/289541 |
Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Tchuindjang, J. T., & Mertens, A. (29 October 2021). On the influence of the Counter-body Material on the Wear Rate of 316L+WC Composite Coatings processed by Laser Cladding [Paper presentation]. EDT-MAIN PhD Scientific Day / NanoWal Annual Meeting, Bruxelles, Belgium. Peer reviewed |
Maurizi-Enrici, T., Dedry, O., Mario, D., Nordera, M., Castagne, S., Tchuindjang, J. T., & Mertens, A. (June 2021). Wear behavior of laser clad 316L+WC composite coatings [Paper presentation]. Thermec 2020 - 11th International Conference on Processing & Manufacturing of Advanced Materials, Vienne (modifié en mode virtuel - covid 19), Austria. Peer reviewed |
Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Mario, D., Serrano Martin, I., Tchuindjang, J. T., & Mertens, A. (April 2021). The role of the Counterbody Material on Tribological Properties of 316L+WC Composite Coatings processed by Laser Cladding [Poster presentation]. 23rd International Conference on Wear of Materials (WOM 2021). Peer reviewed |
El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Duchene, L., Mertens, A., & Habraken, A. (17 March 2021). Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design, 204 (109661). doi:10.1016/j.matdes.2021.109661 Peer reviewed |
Ertugrul, O., Maurizi-Enrici, T., Paydas, H., Saggionetto, E., Boschini, F., & Mertens, A. (20 September 2020). Laser cladding of TiC reinforced 316L stainless steel composites: Feedstock powder preparation and microstructural evaluation. Powder Technology, 375, 384-396. doi:10.1016/j.powtec.2020.07.100 Peer Reviewed verified by ORBi |
El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Jardin, R., Duchene, L., Mertens, A., & Habraken, A. (September 2020). 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing, 50 (86-92). doi:10.1016/j.promfg.2020.08.016 Peer reviewed |
Maurizi-Enrici, T., Dedry, O., Boschini, F., Tchuindjang, J. T., & Mertens, A. (2020). Microstructural and Thermal Characterization of 316L+WC Composite Coatings obtained by Laser Cladding. Advanced Engineering Materials. doi:10.1002/adem.202000291 Peer Reviewed verified by ORBi |
Maurizi-Enrici, T., Mertens, A., Sinnaeve, M., & Tchuindjang, J. T. (04 December 2019). Elucidation of the solidification sequence of a complex graphitic HSS alloy under a combined approach of DTA and EBSD analyses. Journal of Thermal Analysis and Calorimetry, 1 (15). doi:10.1007/s10973-019-09093-9 Peer Reviewed verified by ORBi |
Maurizi-Enrici, T., Mario, D., Mancini, E., Dedry, O., Tchuindjang, J. T., & Mertens, A. (05 September 2019). Stainless steel 316L + WC composite coating produced by laser cladding: on the role of particles dissolution and interfacial reactions [Paper presentation]. Euromat 2019, Stockholm, Sweden. Peer reviewed |
Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., & Mertens, A. (14 June 2019). Micro-mechanical properties of the alpha’ martensite phase occurring in a Ti-6Al-4V alloy after various processing routes, including Laser Metal Deposition [Paper presentation]. The 14th World Conference on Titanium, Nantes, France. Peer reviewed |
Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., Habraken, A., & Mertens, A. (28 May 2019). Influence of Processing Routes on the Micro-mechanical behavior of alpha’-martensite in Ti-6Al-4V alloy [Paper presentation]. 4th Workshop on Metal Additive Manufacturing, Leuven, Belgium. |
Maurizi-Enrici, T., Mario, D., Dedry, O., Tchuindjang, J. T., & Mertens, A. (28 May 2019). Recent advances on 316L+WC Composite Coatings Processed by Laser Cladding [Paper presentation]. Workshop on Metal AM in Leuven2019, Leuven, Belgium. |
Maurizi-Enrici, T., Tchuindjang, J. T., Dedry, O., Mario, D., & Mertens, A. (09 April 2019). Fabrication and improvement of 316L+WC composite coatings processed by Laser Cladding [Paper presentation]. SAMPE Benelux 2019, Marknesse, Netherlands. Peer reviewed |
Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (13 September 2018). Segregation network structure investigation on 316L stainless steel processed by Laser Cladding [Paper presentation]. INDENTATION2018. Peer reviewed |
Sartori, S., Pezzato, L., Dabalà, M., Maurizi-Enrici, T., Mertens, A., Ghiotti, A., & Bruschi, S. (September 2018). Surface integrity analysis of Ti6Al4V after semi-finishing turning under different low-temperature cooling strategies. Journal of Materials Engineering and Performance, 27 (9), 4810-4818. doi:10.1007/s11665-018-3598-x Peer Reviewed verified by ORBi |
Tchuindjang, J. T., Esteva, H., Tran, H. S., Paydas, H., Maurizi-Enrici, T., Delahaye, J., Mertens, A., & Habraken, A. (27 June 2018). 3D Thermal simulation in Additive Manufacturing processes with microstructure validation to help developing new thermo-metallurgical models: case study with Direct Metal Deposition of Ti6Al4V [Paper presentation]. MatX 2018 - International Conference on Material Innovation, Nuremberg, Germany. |
Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (28 May 2018). Microstructural and Thermal Characterization of 316L+WC Composite Coatings by Laser Cladding [Poster presentation]. 3rd Workshop on Metal Additive Manufacturing, Liège, Belgium. |
Maurizi-Enrici, T., Mancini, E., Mertens, A., Tchuindjang, J. T. (Other coll.), & Magnien, J. (Other coll.). (28 March 2018). Microstructure and Nano-Hardness in 316L+WC Composite Coatings Processed by Laser Cladding [Paper presentation]. 16th European Mechanics of Materials Conference, Nantes, France. Peer reviewed |
Maurizi-Enrici, T., Dedry, O., & Tchuindjang, J. T. (26 August 2017). New Insights on the in-situ Destabilization of the M2C Eutectic Carbides under Thermal Treatment in a Multicomponent Cast Iron Grade [Paper presentation]. 6th International Conference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills, Osaka, Japan. |