  | Snoeck, G., Mertens, A., & Tchuindjang, J. T. (07 February 2024). Repair of complex aluminum parts processed by additive manufacturing (Poster PhD day Space4ReLaunch Louvain-la-Neuve) [Poster presentation]. PhD day Space4ReLaunch (Louvain-la-Neuve), Louvain-la-Neuve, Belgium. |
  | Habraken, A., Jardin Tome, R., Pham Quy Duc, T., Tchuindjang, J. T., Carrus, R., Tuninetti, Duchene, L., Mertens, A., Hoang, T. V., & Tran Xuan Van. (05 October 2023). Simulations of Directed Energy Deposition process, High Speed Steel [Paper presentation]. 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, 4-6 October 2023, İstanbul, Türkiye (Hybrid), Istanbul, Turkey. |
 | Saggionetto, E., Seidou, A. H., Roger Vila, G., Dedry, O., Tchuindjang, J. T., & Mertens, A. (October 2023). Development of SiC-enriched tool steel by Laser Powder Bed Fusion [Paper presentation]. High Strength Steel - International Workshop, Bergamo, Italy.  Peer reviewed |
 | Jardin, R. T., Tuninetti, V., Tchuindjang, J. T., Duchene, L., Hashemi, S. N., Tran, H. S., Carrus, R., Mertens, A., & Habraken, A. (August 2023). Optimizing laser power of directed energy deposition process for homogeneous AISI M4 steel microstructure. Optics and Laser Technology, 163, 109426. doi:10.1016/j.optlastec.2023.109426 Peer Reviewed verified by ORBi |
 | Maurizi-Enrici, T., Mario, D., Dedry, O., Castagne, S., Mertens, A., & Tchuindjang, J. T. (2023). Unveiling the complex wear sequence of a directed energy deposited 316L+WC hierarchical composite against alumina. Journal of Materials Research and Technology. doi:10.1016/j.jmrt.2023.07.172 Peer Reviewed verified by ORBi |
 | Saggionetto, E., Seidou, A. H., Filippi, E., Roger Vila, G., Dedry, O., Tchuindjang, J. T., & Mertens, A. (04 July 2023). On the Laser Powder Bed Fusion of a Modified AISI S2 Tool Steel Enriched with SiC [Paper presentation]. Thermec 2023 - International Conference on Processing & Manufacturing of Advanced Materials, Vienne, Austria. Peer reviewed |
 | Rojas Ulloa, C. E., Morch, H., Tchuindjang, J. T., Pensis, O., Di Giovanni, A., Mertens, A., Duchene, L., Tuninetti, V., & Habraken, A. (03 July 2023). Creep mechanisms of Incoloy 800H at high temperature [Paper presentation]. Thermec 2023 The International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Vienne, Austria. |
 | Saggionetto, E., Seidou, A. H., Roger Vila, G., Boschini, F., Tchuindjang, J. T., & Mertens, A. (July 2023). Preparation of powders mixture of AISI S2 Tool Steel and Silicon Carbide for use in Laser Powder Bed Fusion [Poster presentation]. Thermec 2023, Vienna, Austria. |
 | Rojas Ulloa, C., Morch, H., Tuninetti Vásquez, V., Tchuindjang, J. T., Mertens, A., Duchene, L., Habraken, A., Pensis, O., & Di Giovanni, A. (23 May 2023). Accurate very-high temperature creep-life prediction of Incoloy 800H addressing effects of creep mechanism transition and nitridation [Paper presentation]. ECCC23, Edimburgh, United Kingdom. |
 | Saggionetto, E., Filippi Elena, Dedry, O., Tchuindjang, J. T., & Mertens, A. (2023). Development and processability of AISI S2 tool steel by laser powder bed fusion [Paper presentation]. ESAFORM Conference 2023. |
 | Saggionetto, E., Filippi Elena, Dedry, O., Tchuindjang, J. T., & Mertens, A. (2023). Development and processability of AISI S2 tool steel by Laser Powder Bed Fusion. In Lukasz Madej, Mateusz Sitko, ... Konrad Perzynski, Material Forming – ESAFORM 2023 (Vol. 28, pp. 41-48). Millersville, United States - Pennsylvania: Materials research forum. doi:10.21741/9781644902479-5 Peer reviewed |
 | Seidou, A. H., Saggionetto, E., Dedry, O., Tchuindjang, J. T., & Mertens, A. (2023). Evaluation under near-equilibrium conditions of the powders mixture AISI S2 Tool Steel and Silicon Carbide for Laser Powder Bed Fusion applications [Poster presentation]. International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Wien, Austria. |
 | Maurizi-Enrici, T., Saggionetto, E., Dedry, O., Boschini, F., Tchuindjang, J. T., & Mertens, A. (13 September 2022). High-silicon austenitic stainless steels obtained by laser cladding: elaboration, microstructure and local properties [Paper presentation]. Alloys for Additive Manufacturing Symposium 2022, Munich, Germany. Peer reviewed |
El Fetni, S., Habraken, A., Mertens, A., & Tchuindjang, J. T. (April 2022). Prediction of Phase-transformations of Ti6Al4V additively manufactured during Directed Energy Deposition [Paper presentation]. 18th European Mechanics of Materials Conference. Editorial reviewed |
 | Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Tchuindjang, J. T., & Mertens, A. (29 October 2021). On the influence of the Counter-body Material on the Wear Rate of 316L+WC Composite Coatings processed by Laser Cladding [Paper presentation]. EDT-MAIN PhD Scientific Day / NanoWal Annual Meeting, Bruxelles, Belgium. Peer reviewed |
 | Maurizi-Enrici, T., Dedry, O., Mario, D., Nordera, M., Castagne, S., Tchuindjang, J. T., & Mertens, A. (June 2021). Wear behavior of laser clad 316L+WC composite coatings [Paper presentation]. Thermec 2020 - 11th International Conference on Processing & Manufacturing of Advanced Materials, Vienne (modifié en mode virtuel - covid 19), Austria. Peer reviewed |
 | Tchuindjang, J. T., Paydas, H., Tran, H. S., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (31 May 2021). A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition. Materials, 14 (11), 2985. doi:10.3390/ma14112985 Peer Reviewed verified by ORBi |
 | Saggionetto, E., Maurizi-Enrici, T., Dedry, O., Mario, D., Serrano Martin, I., Tchuindjang, J. T., & Mertens, A. (April 2021). The role of the Counterbody Material on Tribological Properties of 316L+WC Composite Coatings processed by Laser Cladding [Poster presentation]. 23rd International Conference on Wear of Materials (WOM 2021). Peer reviewed |
 | Dedry, O., Delahaye, J., Vertruyen, B., Habraken, A., Tchuindjang, J. T., & Mertens, A. (2021). Thermal and microstructural characterizations of AlSi10Mg samples processed by Selective Laser Melting using two different preheating temperatures [Paper presentation]. Thermec 2021. Peer reviewed |
Tchuindjang, J. T., Dedry, O., Paydas, H., Jardin, R. T., Carrus, R., Habraken, A., & Mertens, A. (2021). Micromechanical assessment and thermophysical characterization of HSS M4 deposits processed by Laser Metal Deposition, - a prerequisite to the validation of a thermomechanical model [Paper presentation]. Thermec 2021. Peer reviewed |
 | Tchuindjang, J. T. (2020). Étude des liens Procédés-Microstructures-Propriétés pour les Alliages hors équilibre (Aciers à outils et Ti6Al4V) [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/252091 |
 | Jardin Tome, R., Tuninetti, V., Tchuindjang, J. T., Hashemi, S. N., Carrus, R., Mertens, A., Duchene, L., Tran, H. S., & Habraken, A. (22 November 2020). Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals, 10 (2020), 1554. doi:10.3390/met10111554 Peer Reviewed verified by ORBi |
 | Ganou Koungang, B. M., Ndapeu, D., Tchuindjang, J. T., Wenga Ntcheping, B., Tchemou, G., Bistac, S., Njeugna, E., & Courard, L. (14 October 2020). Influence of temperature on the creep behaviour by macroindentation of Cocos nucifera shells and Canarium schweinfurthii cores (bio-shellnut wastes in Cameroon). Materials Research Express, 7 (10), 14. doi:10.1088/2053-1591/abbebb Peer Reviewed verified by ORBi |
 | Maurizi-Enrici, T., Dedry, O., Boschini, F., Tchuindjang, J. T., & Mertens, A. (2020). Microstructural and Thermal Characterization of 316L+WC Composite Coatings obtained by Laser Cladding. Advanced Engineering Materials. doi:10.1002/adem.202000291 Peer Reviewed verified by ORBi |
 | Mertens, A., Delahaye, J., Dedry, O., Vertruyen, B., Tchuindjang, J. T., & Habraken, A. (26 April 2020). Microstructure and properties of SLM AlSi10Mg: Understanding the influence of the local thermal history. Procedia Manufacturing, 47, 1089-1095. doi:10.1016/j.promfg.2020.04.121 Peer reviewed |
 | Habraken, A., Mertens, A., Duchene, L., Tchuindjang, J. T., Tran, H. S., Tomé Jardin, R. A., Delahaye, J., Dedry, O., Paydas, H., & Carrus, R. (06 December 2019). Microstructure prediction in additive manufacturing(TA6V, AlSi10Mg, AISI M4 materials) [Paper presentation]. Séminaire mensuel Integrative Systems+Design Division, Ann Arbor, United States - Michigan. |
 | Maurizi-Enrici, T., Mertens, A., Sinnaeve, M., & Tchuindjang, J. T. (04 December 2019). Elucidation of the solidification sequence of a complex graphitic HSS alloy under a combined approach of DTA and EBSD analyses. Journal of Thermal Analysis and Calorimetry, 1 (15). doi:10.1007/s10973-019-09093-9 Peer Reviewed verified by ORBi |
 | Maurizi-Enrici, T., Mario, D., Mancini, E., Dedry, O., Tchuindjang, J. T., & Mertens, A. (05 September 2019). Stainless steel 316L + WC composite coating produced by laser cladding: on the role of particles dissolution and interfacial reactions [Paper presentation]. Euromat 2019, Stockholm, Sweden. Peer reviewed |
 | Delahaye, J., Tchuindjang, J. T., Lecomte-Beckers, J., Rigo, O., Habraken, A., & Mertens, A. (15 August 2019). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Acta Materialia, 175, 160-170. doi:10.1016/j.actamat.2019.06.013 Peer Reviewed verified by ORBi |
 | Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Mertens, A., Habraken, A., & Tran, H. S. (2019). Numerical analysis of thermal stress in laser cladding technology of M4 High Speed Steel. In Y. Korkolis, B. Kinsey, M. Knezevic, ... Padhye, Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes. Peer reviewed |
 | Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., & Mertens, A. (14 June 2019). Micro-mechanical properties of the alpha’ martensite phase occurring in a Ti-6Al-4V alloy after various processing routes, including Laser Metal Deposition [Paper presentation]. The 14th World Conference on Titanium, Nantes, France. Peer reviewed |
Tchuindjang, J. T., Paydas, H., Maurizi-Enrici, T., Carrus, R., Habraken, A., & Mertens, A. (28 May 2019). Influence of Processing Routes on the Micro-mechanical behavior of alpha’-martensite in Ti-6Al-4V alloy [Paper presentation]. 4th Workshop on Metal Additive Manufacturing, Leuven, Belgium. |
Maurizi-Enrici, T., Mario, D., Dedry, O., Tchuindjang, J. T., & Mertens, A. (28 May 2019). Recent advances on 316L+WC Composite Coatings Processed by Laser Cladding [Paper presentation]. Workshop on Metal AM in Leuven2019, Leuven, Belgium. |
 | Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Pesci, R., Mertens, A., Habraken, A., & Tran, H. S. (27 May 2019). Thermo-Mechanical laser cladding simulations of M4 High Speed Steel [Paper presentation]. 4th workshop of Metal Additive Manufacturing, Leuven, Belgium. |
 | Maurizi-Enrici, T., Tchuindjang, J. T., Dedry, O., Mario, D., & Mertens, A. (09 April 2019). Fabrication and improvement of 316L+WC composite coatings processed by Laser Cladding [Paper presentation]. SAMPE Benelux 2019, Marknesse, Netherlands. Peer reviewed |
 | Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (01 February 2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45. doi:10.1016/j.matlet.2018.09.157 Peer Reviewed verified by ORBi |
 | Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (10 December 2018). Assessment of Si precipitate contribution to SEM-EDS analysis in an Al/Si alloy through Monte Carlo simulation performed by DTSAII freeware [Paper presentation]. CAREM user’s day. |
 | Dedry, O., Hashemi, S. N., Mertens, A., & Tchuindjang, J. T. (December 2018). Characterization of Microstructure in a HSS Alloy processed by Laser Metal Deposition through EBSD Analysis and Nanoindentation Tests [Paper presentation]. Séminaire des utilisateurs des microscopes de la CAREM. |
 | Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (13 September 2018). Segregation network structure investigation on 316L stainless steel processed by Laser Cladding [Paper presentation]. INDENTATION2018. Peer reviewed |
 | Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (September 2018). Dominant strengthening mechanism of AlSi10Mg processed by Selective Laser Melting [Poster presentation]. Colloque Indentation 2018, Liège, Belgium. Peer reviewed |
 | Dedry, O., Hashemi, S. N., Carrus, R., Cayron, C., Mertens, A., & Tchuindjang, J. T. (September 2018). Microstructural and micromechanical characterization of a HSS alloy processed by Laser Metal Deposition: comparison of the matrix within the melt pool and the heat affected zone [Paper presentation]. 6th edition of the symposium Indentation 2018. Peer reviewed |
 | Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Mertens, A., & Habraken, A. (12 July 2018). Modelling the Laser Cladding Process of M4 High Speed Steel [Paper presentation]. International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Paris, France. Peer reviewed |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Lecomte-Beckers, J., Carrus, R., Habraken, A., & Mertens, A. (12 July 2018). High Temperature Wear Behaviour of High Speed Steel Thick Deposits Obtained by Laser Cladding [Paper presentation]. Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France. Peer reviewed |
 | Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (July 2018). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties [Paper presentation]. THERMEC’2018 - INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS. Peer reviewed |
 | Tchuindjang, J. T., Esteva, H., Tran, H. S., Paydas, H., Maurizi-Enrici, T., Delahaye, J., Mertens, A., & Habraken, A. (27 June 2018). 3D Thermal simulation in Additive Manufacturing processes with microstructure validation to help developing new thermo-metallurgical models: case study with Direct Metal Deposition of Ti6Al4V [Paper presentation]. MatX 2018 - International Conference on Material Innovation, Nuremberg, Germany. |
 | Paydas, H., Tran, H. S., Carrus, R., Habraken, A., Mertens, A., & Tchuindjang, J. T. (28 May 2018). Investigation into the occurrence of recrystallization during the additive manufacturing of a thick Ti6Al4V deposit [Poster presentation]. 3rd Workshop on Additive Manufacturing of Metals, Liège, Belgium. |
 | Delahaye, J., Tchuindjang, J. T., Habraken, A., & Mertens, A. (28 May 2018). Selective Laser Melting of AlSi10Mg : influence of the thermal history during the process on the microstructure and mechanical properties [Paper presentation]. Workshop on Metal Additive Manufacturing, Liège, Belgium. |
 | Maurizi-Enrici, T., Tchuindjang, J. T., & Mertens, A. (28 May 2018). Microstructural and Thermal Characterization of 316L+WC Composite Coatings by Laser Cladding [Poster presentation]. 3rd Workshop on Metal Additive Manufacturing, Liège, Belgium. |
 | Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (25 April 2018). 2D FE Simulations of High Speed Steel Laser Cladding Process [Paper presentation]. ESAFORM, Palermo, Italy. Peer reviewed |
 | Tran, H. S., Tchuindjang, J. T., Paydas, H., Tomé Jardin, R. A., Carrus, R., Mertens, A., & Habraken, A. (28 March 2018). Predicted microstructure in repair technology of Ti-6Al-4V [Paper presentation]. 16th edition of the European Mechanics of Material Conference, Nantes, France. Peer reviewed |
 | Maurizi-Enrici, T., Mancini, E., Mertens, A., Tchuindjang, J. T. (Other coll.), & Magnien, J. (Other coll.). (28 March 2018). Microstructure and Nano-Hardness in 316L+WC Composite Coatings Processed by Laser Cladding [Paper presentation]. 16th European Mechanics of Materials Conference, Nantes, France. Peer reviewed |
 | Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (28 March 2018). Influence of the local thermal history and microstructure on the wear behaviour of laser clad high speed steel thick coatings [Paper presentation]. 16th European Mechanics of Materials Conference, Nantes, France. |
 | Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Tomé Jardin, R. A., Tran, H. S., Carrus, R., & Habraken, A. (04 January 2018). Laser Clad High Speed Steel thick deposits: Correlations between the local thermal history, the microstructures and the wear mechanisms [Paper presentation]. International Conference on Plasticity, Damage and Fracture 2018, San Juan, Puerto Rico. Peer reviewed |
 | Tchuindjang, J. T., Hashemi, S. N., Dedry, O., Sinnaeve, M., & Lecomte-Beckers, J. (2017). Effects of High Solidification Rates on Segregations and Solid Phase Transformations in High Speed Steels. In ABRASION 2017 - The 6th International COnference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills. |
 | Maurizi-Enrici, T., Dedry, O., & Tchuindjang, J. T. (26 August 2017). New Insights on the in-situ Destabilization of the M2C Eutectic Carbides under Thermal Treatment in a Multicomponent Cast Iron Grade [Paper presentation]. 6th International Conference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills, Osaka, Japan. |
 | Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (15 August 2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142. doi:10.1016/j.matdes.2017.04.092 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (2017). Effects of High Solidification Rates on Segregations and Solid Phase Transformations in High Speed Steels. In Y. MATSUBARA, N. SASAGURI, ... K. YAMAMOTO (Eds.), ABRASION 2017 - The 6th International COnference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills (pp. 161-178). Peer reviewed |
 | Tomé Jardin, R. A., Tchuindjang, J. T., Paydas, H., Carrus, R., Mertens, A., Lecomte-Beckers, J., Habraken, A., & Tran, H. S. (28 June 2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V [Paper presentation]. Workshop on metal additive manufacturing, Louvain-la-Neuve, Belgium. |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Carrus, R., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (28 June 2017). Wear behaviour of laser clad High Speed Steels thick deposits [Paper presentation]. Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgium. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Flores, P., Lecomte-Beckers, J., & Habraken, A. (June 2017). FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. International Journal of Material Forming, Volume 10, (Issue 3), 287–305. doi:10.1007/s12289-015-1277-0 Peer Reviewed verified by ORBi |
 | Hashemi, S. N., Mertens, A., Montrieux, H.-M., Tchuindjang, J. T., Dedry, O., Carrus, R., & Lecomte-Beckers, J. (15 April 2017). Oxidative wear behaviour of laser clad high speed steel thick deposits: influence of sliding speed, carbide type and morphology. Surface and Coatings Technology, 315, 519-529. doi:10.1016/j.surfcoat.2017.02.071 Peer Reviewed verified by ORBi |
 | De Baere, K., Verstraelen, H., Willemen, R., Smet, J.-P., Tchuindjang, J. T., Lecomte-Beckers, J., Lenaerts, S., Meskens, R., Jung, H. G., & Potters, G. (2017). Assessment of corrosion resistance, material properties, and weldability of alloyed steel for ballast tanks. Journal of Marine Science and Technology, 22 (1), 176-199. doi:10.1007/s00773-016-0402-1 Peer Reviewed verified by ORBi |
 | Tran, H. S., Tchuindjang, J. T., Hakan, P., Jardin, R., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. In Extended Abstract book of 14th Conf. on Computer Methods in Materials Technology KomPlasTech 2017. |
 | Tchuindjang, J. T., Dedry, O., Hashemi, S. N., & Lecomte-Beckers, J. (12 May 2016). Microstructure et propriétés de revêtements épais à résistance à l’usure améliorée obtenus par additive manufacturing [Paper presentation]. Innovative and Sustainable Coatings:Améliorer durablement les propriétés mécaniques et esthétiques de vos substrats métalliques, Mons, Belgium. |
 | Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Carrus, R., & Lecomte-Beckers, J. (2016). On the Laser Cladding of Ti Alloy Ti-6Al-4V with Low Laser Power. In V. Ventakesh, A. L. Pilchak, J. E. Allison, S. Ankem, R. Boyer, J. Christodoulou, H. L. Fraser, M. A. Imam, Y. Kosaka, A. Chatterjee, ... A. Woodfield (Eds.), Proc. of the 13th World Conference on Titanium (pp. 1299-1304). Hoboken, United States - New Jersey: John Wiley & Sons. doi:10.1002/9781119296126.ch220 Peer reviewed |
 | Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Carrus, R., Habraken, A., & Lecomte-Beckers, J. (09 February 2016). Local thermal history during the laser additive manufacturing of steel [Paper presentation]. 4th CFD and Thermomechanics Days, Maizières, France. |
 | Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchuindjang, J. T. (15 November 2015). Laser cladding as repair technology for Ti6Al4V alloy: Influence of building strategy on microstructure and hardness. Materials and Design, 85, 497-510. doi:10.1016/j.matdes.2015.07.035 Peer Reviewed verified by ORBi |
 | Hashemi, S. N., Lecomte-Beckers, J., Montrieux, H.-M., Dedry, O., & Tchuindjang, J. T. (September 2015). Comparison of the wear behavior of high speed steel grades obtained from conventional casting and laser cladding [Paper presentation]. Euromat 2015 - European Congress and Exhibition on Advanced Materials and Processes, Warsaw, Poland. |
 | Tchuindjang, J. T., Habraken, A., & Lecomte-Beckers, J. (September 2015). Study of the Crystallization Behavior and the Subsequent Martensitic Transformation in a High Chromium Cast Steel submitted to Different Austenitization Temperatures [Paper presentation]. Euromat 2015 - European Congress and Exhibition on Advanced Materials and Processes, Warsaw, Poland. |
 | Tchuindjang, J. T., Paydas, H., Hashemi, S. N., Dedry, O., & Lecomte-Beckers, J. (July 2015). Carbides and grain size quantification methods in high speed steel alloys [Paper presentation]. 14th International Congress for Stereology and Image Analysis (14th ICSIA), Liège, Belgium. |
 | Tchuindjang, J. T., Paydas, H., Hashemi, S. N., Dedry, O., & Lecomte-Beckers, J. (July 2015). Development of quantification methods applied to HSS alloys for carbides volume fraction and grain size assessments [Poster presentation]. 14th International Congress for Stereology and Image Analysis (14th ICSIA), Liège, Belgium. |
 | Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Determination of Stress and Strain Fields in Cast and Heat Treated Bimetallic Rolling Mill Rolls. In Proceedings of the Iron & Steel Technology Conference and Exposition (AISTech 2015 & ICSTI) (pp. 2706-2716). Peer reviewed |
 | Gilles, G., Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Modelling of stress field evolution in bimetallic rolling mill rolls during the manufacturing process. In Proceedings of the 5th Conference on rolling mill rolls for metals processing Rolls 5 2015. |
 | Tchuindjang, J. T., Neira Torres, I., Fores, P., Habraken, A., & Lecomte-Beckers, J. (12 March 2015). Phase Transformations and Crack Initiation in a High-Chromium Cast Steel Under Hot Compression Tests. Journal of Materials Engineering and Performance, 24 (5), 2025-2041. doi:10.1007/s11665-015-1464-7 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2015). Rapport des analyses chimiques, fractographiques et métallographiques sur des vis M24 (12.9) rompues en service. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2015). Rapport des analyses visuelle et au binoculaire réalisées sur des robinets en laiton rompus en service. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2015). Rapport des analyses métallographiques sur un serre-câble reçu dans un état usagé et non-corrodé. |
 | Hashemi, S. N., Dedry, O., Lecomte-Beckers, J., Montrieux, H.-M., Walmag, Carrus, R., & Tchuindjang, J. T. (2015). Comparison of the wear behavior of high speed steel grades obtained from conventional casting and laser cladding. In Materiaux et tribologie jift 2014. Peer reviewed |
| Lecomte-Beckers, J., Tchuindjang, J. T., & Paydas, H. (2015). RAPPORT SCIENTIFIQUE & TECHNIQUE FINAL - Projet BLUM – RW 6800. ULg - Université de Liège. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques sur trois serre-câbles reçus dans 3 états différents. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Influence de la température de service sur des chainons de bandes transporteuses (flights) pour four de cuisson de laine de verre. |
 | Tchuindjang, J. T., Neira Torres, I., Habraken, A., Sinnaeve, M., & Lecomte-Beckers, J. (2014). Characterization of the Solidification Path, the Solid State Transformations and the Mechanical Behavior of a High Chromium Cast Steel. In T. Nylen (Other coll.), Proceedings of the 5th Abrasion Conference - 2014. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses chimiques, métallographiques et fractographiques sur une butée de sécurité en aluminium 5xxx, rompue en service. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). AVIS SCIENTIFIQUE SUR ANALYSE COMPAREE DE DEUX MINI-COCOTTES EN FONTE EMAILLEE AYANT DES ORIGINES DIFFERENTES. |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (12 May 2014). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. IAP P7/21 INTEMATE Meeting. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques et fractographiques sur tubes en AA 7075-T6, dont un rompu lors d’un test de qualification. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses chimiques et métallographiques sur tuyauteries en acier galvanisé perforées en service. |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., & Lecomte-Beckers, J. (27 March 2014). Laser cladded high speed steel coatings : Effect of the laser parameters on microstructure and properties of laser cladded coatings [Paper presentation]. IAP P7/21 INTEMATE Meeting. |
| Neira Torres, I., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (05 February 2014). A FEM approach to study phase transformation within bimetallic rolls [Paper presentation]. CFD and Thermomechanics days 2014, Maizières-lès-metz, France. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., sinnaeve, M., & Habraken, A. (2014). Study of residual stresses in bimetallic work rolls. Advanced Materials Research, 996, 580-585. doi:10.4028/www.scientific.net/AMR.996.580 Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques et fractographiques sur une vanne en laiton rompue en service. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Chemical and Metallographic Analyses on Steel Flights of various origin used in a Curing Oven. |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (12 November 2013). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. IAP P7/21 INTEMATE Meeting. |
| Lecomte-Beckers, J., Tchuindjang, J. T., Dedry, O., & Reginster, S. (2013). Rapport Final, PROJET RECYLCLAD RW 11-1-7335 : Fabrication de Cylindres Bimétalliques par Rechargement Laser (Laser Cladding) d’Aciers à Outils optimisés sur Axes Réutilisables. ULg - Université de Liège. |
| Neira Torres, I., Lecomte-Beckers, J., Tchuindjang, J. T., Habraken, A., & Gilles, G. (10 September 2013). Study of phase transformations within bimetallic rolling mills [Paper presentation]. First International Workshop Lagashop 2013, Liége, Belgium. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Study and Characterization of Seawater Corrosion on 3 Carbon steels. |
 | Lecomte-Beckers, J., Tchuindjang, J. T., & Paydas, H. (2013). Présentation d'un cas de corrosion microbienne dans la station d’épuration de Liège-Oupeye [Paper presentation]. Séminaire Aquawal, Oupeye, Belgium. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Rapport des analyses métallos et MEB-EDS sur des tuyauteries inox corrodées en service. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., Sinnaeve, M., & Habraken, A. (2013). Prediction of residual stresses by FE simulations on bimetallic work rolls during cooling. Computer Methods in Materials Science, 13 (1), 84-91. Peer reviewed |
 | Reginster, S., Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2013). Processing of Ti alloys by additive manufacturing: a comparison of the microstructures obtained by laser cladding, selective laser melting and electron beam melting. Materials Science Forum, 765, 431-417. doi:10.4028/www.scientific.net/MSF.765.413 Peer reviewed |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2013). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. BEMEKO workshop on measurement. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Rapport des analyses Métallographiques, Fractographiques et Chimique sur une Bride DN100 PN100 en Inox rompue en service. |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2012). Analyses métallographiques et fractographiques sur une soupape de moteur thermique rompue. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses chimiques et métallographiques comparatives d’une tôle brute et d’une plaque usinée. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses fractographiques sur une plaque-support d’un convoyeur en aluminium 5083 fissurée, et analyses métallographiques et non-destructives sur plaque-support en 6082 impactée. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses métallographiques et fractographiques sur plaque de convoyeur fissurée en alliage d'aluminium 5083. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2012). Synthèse bibliographique sur les propriétés mécaniques des alliages d'aluminium 5083,6082 et 7075. |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2012). Current Developments of Alloyed Steels for Hot Strip Roughing Mills : Characterization of High-Chromium Steel and Semi-High Speed Steel. Iron and Steel Technology, 33-40. Peer Reviewed verified by ORBi |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses chimiques et métallographiques sur une manchette perforée après soudure sur un coude. |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2011). Comparison between High Chromium Steel and Semi HSS used in Hot Strip Mill Roughing Stands. In Proceedings of the 13th Southern African Roll Users Conference (SARUC 2011) (pp. 35-40). Witbank, South Africa: SARUC. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses chimiques et métallographiques sur une tuyauterie en inox perforée. |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (September 2011). Enhancement of in-situ Transformation of M2C Eutectics Carbides during High Temperature Heat Treatment on a HSS and a Semi-HSS Grades [Poster presentation]. European congress and exhibition on advanced materials and processes, EUROMAT 2011, Montpellier, France. |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (Eds.). (2011). Proceedings of the international conference Abrasion 2011 (Abrasion Wear Resistant Alloyed White Cast Irons For Rolling and Pulverizing Mills), 4th Edition. Liège, Belgium: ULg-Service MMS. |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (2011). Influence of High Temperature Heat Treatment on in situ Transformation of Mo-rich Eutectic Carbides in HSS and Semi-HSS Grades. In J. Lecomte-Beckers & J. T. Tchuindjang (Eds.), Conference Proceedings of Abrasion 2011 (pp. 61-75). Liège, Belgium: MMS-ULg. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses fractographiques sur une tôle de citerne à mazout fissurée. |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (30 June 2011). Study of the origin of the unexpected pearlite during the cooling stage of two cast high-speed steels. Solid State Phenomena, 172-174, 803-808. doi:10.4028/www.scientific.net/SSP.172-174.803 Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses chimiques, métallographiques et fractographiques sur un tube coudé en titane rompu. |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2011). Equilibrium and non Equilibrium study of the Fine Pearlite Formation in two Cast High Speed Steels after solidification and thermal treatment. International Journal of Materials Research. Peer reviewed |
 | Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156. doi:10.1063/1.3589507 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2011). New Trends in Hot Strip Mill Roughing Mills: Characterization of High Chromium Steel and Semi-HSS Grades. In Proceedings of the Iron & Steel Technology Conference (AISTech 2011) (pp. 1771-1782). Peer reviewed |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Sinnaeve, M., & Ernst, R. (2010). RECENT TRENDS IN HOT STRIP ROUGHING MILLS: HIGH CHROMIUM STEEL VERSUS SEMI-HSS. In Procceedings of the 47th Rolling Seminar - Processes, Rolled and Coated Products (pp. 689-702). Peer reviewed |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Comparison between a high chromium steel and a semi HSS grades used as work rolls in the roughing stands of a hot strip mill. In Proceedings of The 10th International Conference on Steel Rolling (10th ICSR) (pp. 1771-1781). Beijing, China: The chinese society for metals. Peer reviewed |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Rapport des analyses chimiques et MEB sur des échantillons de tuyauteries en inox corrodées. |
Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Examen métallographique sur des échantillons en alliage Ti-6Al-4V soudés par friction. (Convention Blisk RW 6247). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2009). Etude comparative de la cinétique de solidification à l'équilibre et hors-équilibre de deux nuances d'un alliage pour cylindre de travail dégrossisseur à chaud. (Rapport - Final Convention RW 5359). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2009). Essais en analyse thermique différentielle sur l'enveloppe d'un cylindre de travail dégrossisseur à chaud. (Projet CENCYLAM). |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (2009). Structural investigation of solidification and heat treatments influence on High Alloyed Cast Irons Grades with Nb-V-Ti Additions. Defects and diffusion forum, 289-292, 77-86. doi:10.4028/www.scientific.net/DDF.289-292.77 Peer reviewed |
Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Etude de dépôts en alliage Nickel - Diamants fabriqués par Laser Cladding. (Rapport de recherche LaserCo - Rapport Final). |
Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Recherche sur la frittabilité de l'Inconel 718. (Rapport de recherche Metal Inject - Rapport Final). |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Investigation on retained delta ferrite occurrence and its influence on HSS and Semi HSS Strengthening after thermomecanical routes. In Proceedings of Abrasion 2008 (pp. 115-127). Italy: Edito M. Pellizzari. Peer reviewed |
 | Tchuindjang, J. T., Terziev, L., Sinnaeve, M., Mukadi Kantabilenga, G., & Lecomte-Beckers, J. (16 November 2007). ASSESSMENT OF RETAINED AUSTENITIC PHASE IN INDEFINITE CHILL CAST IRON MICROSTRUCTURE TOWARDS VARIOUS TECHNIQUES [Poster presentation]. Congrès annuel de la société belge de microscopie (SBM), Liège, Belgium. |
 | Ernst, R., Breyer, J.-P., Tchuindjang, J. T., & Lecomte-Beckers, J. (2007). Improvement in HSS grade for early stands of hot strip mills - Metallurgical features and mechanical properties assessment. In Proceedings of the 43rd Seminar of Rollings. Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2007). Fractography survey on high cycle fatigue failure: Crack origin characterisation and correlations between mechanical tests and microstructure in Fe-C-Cr-Mo-X alloys. International Journal of Fatigue, 29 (4), 713-728. doi:10.1016/j.ijfatigue.2006.06.012 Peer Reviewed verified by ORBi |
 | Pecquet, E., Cescotto, S., & Tchuindjang, J. T. (2007). Conception and Construction of an Impact Machine (100Kj) for Frontal and Skew Shocks. In M. S. Konsta-Gdoutos, I. M. Daniel, Z. S. Metaxa, ... J. Cho, Experimental Analysis of Nano and Engineering Materials and Structures: Proceedings of the 13th International Conference on Experimental Mechanics (pp. 805-806). Dordrecht, Netherlands: Springer. doi:10.1007/978-1-4020-6239-1_400 Peer reviewed |
 | Lecomte-Beckers, J., Delaunois, F., Breyer, J.-P., & Tchuindjang, J. T. (2007). Metallurgical assessment of two HSS rolls grades for Hot Strip Mill. In AISTech-Proceedings of the Iron and Steel Technology Conference. Peer reviewed |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2006). Dimensionnement de chariots d'amortisseurs et choix d'accessoires pour machine d'impact. (Rapport du laboratoire MMS, Actions de Recherche Concertée (ARC) - Communauté Française, MacroMousses). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2005). Etude d'adhésifs et dimensionnement d'une rampe de lancement pour machine d'impact. (Annexe du laboratoire MMS au rapport annuel, Actions de Recherche Concertée (ARC) - Communauté Française, MacroMousses). |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (2005). Use of Microscopy for identification of complex MC, M2C, M6C, M7C3 and M23C6 carbides in high speed-steels. Imaging and Microscopy, 2, 48-49. Peer Reviewed verified by ORBi |
Lecomte-Beckers, J., & Tchuindjang, J. T. (2004). Effet des inclusions et des carbures dans des aciers et fontes fortement alliés, soumis à des sollicitations mécaniques sévères. (Rapport Final - Convention RW 114877 INCA). |
Tchuindjang, J. T. (2004). Effet des inclusions et des carbures sur les propriétés mécaniques dans des alliages Fe-Cr-C-X : application à la rupture en fatigue [Specialised master, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/258426 |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Ernst, R., & Breyer, J.-P. (2004). Structural investigations of HSS rolls for hot strip mill. In Proceedings of the 41st Rolling Seminar Processes, Rolled and Coated Product (pp. 93-102). Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2004). Melting and crystallisation behaviour of multi-component Fe-C-Cr-X alloys : microstructural aspects. In Proceedings of the 13th European Microscopy Congress (pp. 651-652). Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2003). Study of complex carbides obtained after solidification and thermal treatment in High Speed Steels. In Proceedings des journées annuelles de la Société belge de physique SBP-BSP (27 et 28 mai 2003). |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2003). Inclusions and Carbides characterisation in High-Speed Steels. In Proceedings de la journée de la société belge de microscopie (SBM-BVM), RUCA, UA. |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Pirard, E., & Breyer, J.-P. (2003). Development of a new high-speed steel with optimized carbide composition for mill rolls. Stalʹ, 2, 88-92. Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2002). Microscopic identification of complex MC, M2C, M7C3, M6C and M23C6 carbides in high-speed steels. In Proceedings of The International Conference Joint Microscopic Meeting. Peer reviewed |
Lecomte-Beckers, J., Tchuindjang, J. T., Cescotto, S., Pirard, E., Decolnet, L., Ghfiri, R., & Boerave, P. (2002). Relation entre la nature et la distribution des carbures et les propriétés mécaniques sur des cylindres de laminage à chaud (HSS). (Rapport Final - Convention RW 971/3651). |
Lecomte-Beckers, J., Tchuindjang, J. T., Cescotto, S., Pirard, E., Decolnet, L., Ghfiri, R., & Boerave, P. (2002). Relation entre le schéma inclusionnaire et les propriétés mécaniques sur des aciers fortement alliés. (Rapport Final - Convention RW 971/3651). |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2001). Microscopic determination of the nature of MC, M2C, M7C3 (M6C) carbides in high speed steels. In Proceedings of the Annual Meeting of the SBM (société belge de microscopie), Probing the molecular level. |
Lecomte-Beckers, J., & Tchuindjang, J. T. (2001). Influence of some heat treatments parameters on the microstructure of high alloyed steels. In Proceedings of the MSMF-3 International Conference (pp. 693). Peer reviewed |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (1999). Study and Characterization of Inclusions in Steels obtained from ESR and Conventionally Electrical Ingot Processes. In Proceedings of the Annual Meeting of the SBM (société belge de microscopie). |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (1999). Importance of Heat Treating Procedure in the Study and the Characterization of Impurities in high alloyed Steels. In Proceedings of The International COST-517 : Workshop on Cleaner Metals for Industrial Exploitation (pp. 45-53). |
