Doctoral thesis (Dissertations and theses)
Sustainability in Upstream Magnesia Refractories Manufacturing: Resources, Processing, and Reprocessing
Menezes Cunha, João Victor
2026
 

Files


Full Text
Sustainability in Upstream Magnesia Refractories Manufacturing - Resources, Processing, and Reprocessing.pdf
Author postprint (3.93 MB)
Download

All documents in ORBi are protected by a user license.

Send to



Details



Keywords :
Resources; LCA; Recycling; Refractories; Magnesia; Circular Economy
Abstract :
[en] This doctoral thesis investigates important aspects of upstream magnesia refractories manufacturing, focusing on resource management, magnesia production routes, and the reprocessing of spent magnesia–carbon refractories. Refractory magnesia is essential for high-temperature industries, especially steelmaking, but its production is associated with significant environmental burdens due to energy-intensive sintering and the geogenic CO₂ released during magnesite calcination. At the same time, the refractory industry is under increasing pressure to reduce emissions, develop circularity and secure long-term access to mineral resources. This thesis addresses these challenges through three interconnected perspectives: Resource, Process, and Reprocess. The first part examines the limitations of conventional mineral resource depletion assessments, particularly within Life Cycle Assessment (LCA). This thesis argues that resources should not be understood merely as geological stocks, but as materials whose value depends on accessibility and functionality. A resource-accessibility framework is proposed based on three dimensions: intelligibility, ESG permissibility, and technical recoverability. From this perspective, depletion is not primarily caused by extraction, but by dissipation and poor management of materials in the anthroposphere. The second part evaluates the environmental performance of three dead-burned magnesia (DBM) production routes: natural magnesia from magnesite (1) and synthetic magnesia from seawater (2) and from serpentine (3). A cradle-to-gate Conceptual Life Cycle Assessment was performed using inventories developed from process simulation, literature data, and industrial expertise. The results show that the Magnesite route presents the lowest overall environmental burden under the assessed conditions, despite unavoidable geogenic CO₂ emissions. The synthetic routes showed higher impacts, mainly due to reagent consumption and process complexity. The study contributes to the development of LCA in the refractory industry, showing how simulation-based inventories serve as enablers but still with some limitations. The third part investigates recycling pathways for spent magnesia–carbon refractories. Primary and secondary recycling are confronted, shedding light on the downcycling effect. In the face of the challenges posed by the concentration routes, the Controlled Carbon Burnout (CCB) process is evaluated in industrial scale. CCB sinter presented high MgO content, suitable grain bulk density, and a substantially lower CO₂ footprint than virgin DBM. Overall, this thesis shows that sustainable magnesia refractories depend on preserving resource accessibility and value across the whole chain, from source to processing, use, and reprocessing. The findings provide methodological advances and practical insights for enhanced sustainability across the refractory magnesia supply chain.
Disciplines :
Materials science & engineering
Author, co-author :
Menezes Cunha, João Victor  ;  Université de Liège - ULiège > Urban and Environmental Engineering
Language :
English
Title :
Sustainability in Upstream Magnesia Refractories Manufacturing: Resources, Processing, and Reprocessing
Defense date :
12 October 2026
Number of pages :
179
Institution :
ULiège - University of Liège [Faculty of Applied Sciences], Liège, Belgium
Degree :
Doctor of Philosophy (PhD) in Engineering Science and Technology
Promotor :
Pirard, Eric  ;  Université de Liège - ULiège > Département ArGEnCo
Drnek, Thomas;  RHI Magnesita GmbH > Global HSEE
President :
Léonard, Angélique  ;  Université de Liège - ULiège > Chemical engineering
Jury member :
Gaydardzhiev, Stoyan  ;  Université de Liège - ULiège > Urban and Environmental Engineering
Tost, Michael;  University of Leoben
Bicalho Henriques, Andreia;  UFMG > Demin
Development Goals :
9. Industry, innovation and infrastructure
12. Responsible consumption and production
European Projects :
HE - 101072625 - CESAREF - Concerted European action on Sustainable Applications of REFractories
Funders :
European Union. Marie Skłodowska-Curie Actions
European Union
Funding number :
101072625
Funding text :
This work was supported by the European Union’s Horizon Europe research and innovation program through the CESAREF project (grant agreement no.101072625).
Available on ORBi :
since 16 October 2026

Statistics


Number of views
64 (7 by ULiège)
Number of downloads
50 (2 by ULiège)

Bibliography


Similar publications



Contact ORBi