Dynamic analysis of fretting-wear in friction contact interfaces

[en] Fretting wear is a very important phenomenon occurring in bladed disks. It causes that blades must be replaced in turbomachines during their life-cycle. Methods exist to predict fretting-wear in quasi-static analysis. However they don’t predict all the phenomena observed in blade attachments on real turbomachines. That’s why this study assumes that dynamics plays a role in fretting-wear. This paper is devoted to the realistic modelling and calculation of fretting-wear and dynamical response of structures in unilateral contact with friction. Vibration and wear phenomena present very different scales both in time and space. Therefore the difficulty is in finding methods that enable one to solve the non-linear problem with a good compromise between the approximationsmade about the dynamical aspects and those linked with fretting-wear issues. Here, phenomenological examples are studied. They involve a small number of degrees of freedom with a view to understanding the complex coupling between vibration and fretting-wear. This way, they will show the relative importance of parameters.

Disciplines :

Mechanical engineering

Author, co-author :

Salles, Loïc ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M)

Blanc, Laurent

Thouverez, Fabrice

Gouskov, Alexander M

Language :

English

Title :

Dynamic analysis of fretting-wear in friction contact interfaces

Publication date :

2008

Event name :

ASME Turbo Expo 2008 Turbomachinery Technical Conference & Exposition

Event organizer :

ASME

Event place :

Berlin, Germany

Event date :

2008

Audience :

International

Journal title :

Proceedings of the ASME Turbo Expo

Volume :

Issue :

PART A

Pages :

543 - 554

Peer review/Selection committee :

Peer reviewed

Available on ORBi :

since 06 July 2025

Statistics

Number of views

41 (0 by ULiège)

Number of downloads

41 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Charleux, D., Gibert, C, Thouverez, F., and Dupeux, J., 2006. "Numerical and Experimental Study of Friction Damping in Blade Attachments of Rotating Bladed Disks". International Journal of Rotating Machinery, 2006.
Nacivet, S., Pierre, C, Thouverez, F., and Jezequel, L., 2003. "A dynamic Lagrangian frequency-time method for the vibration of dry-friction-damped systems". Journal of Sound and Vibration, 265(1), pp. 201-219.
Gallcgo, L., Nélias, D., and Jacq, C, 2006. "A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces". Journal of Tribology, 128, p. 476.
Paulin, C, Fouvry, S., and Deyber, S., 2005. "Wear kinetics of Ti-6AMV under constant and variable fretting sliding conditions". Wear, 259(l-6F),pp. 292-299.
Levy, G., 1980. "Modeling of Coulomb Damping and Wear of Vibrating Systems". Wear, 64(1), pp. 57-82.
Sextro, W, 2002. Dynamical Contact Problems with Friction: Models, Methods, Experiments and Applications. Springer.
Meng, H., and Ludema, K., 1995. "Wear models and predictive equations: their form and content". Wear, 181(2), pp. 443-457.
Fouvry, S., Liskiewicz, T, Kapsa, P., Hannel, S., and Sauger, E., 2003. "An energy description of wear mechanisms and its applications to oscillating sliding contacts". Wear, 255(1-6), pp. 287-298.
Archard, J., 1953. "Contact and rubbing of flat surface". J.Appl.Phys, 24(8), pp. 981-988.
McColl, I., Ding, J., and Leen, S., 2004. "Finite clement simulation and experimental validation of fretting wear". Wear, 256(11), pp. 1114-1127.
Öqvist, M., 2001. "Numerical simulations of mild wear using updated geometry with different step size approaches". Wear, 249(1-2),pp. 6-11.
Põdra, P., and Andersson, S., 1997. "Wear simulation with the Winkler surface model". Wear, 207(1-2), pp. 79-85.
Sfantos, G., and Aliabadi, M., 2006. "Application of BEM and optimization technique to wear problems". International Journal of Solids and Structures, 43( 11-12), pp. 3626-3642.
Guillen, J., and Pierre, C, 1999. "An efficient, hybrid, frequency-time domain method for the dynamics of large-scale dry friction damped structural systems". Iutam Symposium on Unilateral Multibody Contacts.
Csaba, G., 1998. "Forced response analysis in time and frequency domains of a tuned bladed disk with friction dampers". Journal of Sound and Vibration, 214(3), pp. 395-12.
Petrov, E., and Ewins, D., 2003. "Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks". Journal of Turbomachinery, 125, p. 364.
Laxalde, D., Salles, L., Blanc, L., and Thouverez, 2008. "Non-linear modal analysis for bladed disks with friction contact interfaces. Paper 2008-GT-50860, International Gas Turbine Institute Turbo Expo".
Stromberg, N., 1997. "An augmented Lagrangian method for fretting problems". European journal of mechanics. A. Solids, 16(4), pp. 573-593.
Klarbring, A., 1990. "Derivation and analysis of rate boundary-value problems of frictional contact". Eur. J. Mech. A/Solids, 9(1), pp. 53-85.
Lemaître, J., and Chaboche, J., 1990. Mechanics of solid materials Mécanique des matériaux solides English. Cambridge University Press.
Nayfeh, A., and Mook, D., 1979. Nonlinear Oscillations. Wiley-Interscience.
Meirovitch, L., 2004. Methods of Analytical Dynamics. Dover Publications.
Cusumano, J., and Chatterjee, A., 2000. "Steps towards a qualitative dynamics of damage evolution". International Journal of Solids and Structures, 37(44), pp. 6397-6417.
Cameron, T., and Griffin, J., 1989. "An alternating frequency/time domain method for calculating the steady-state response of nonlinear dynamic systems". ASME, Transactions, Journal of Applied Mechanics, 56, pp. 149-154.
Sanliturk, K., Ewins, D., Elliott, R., and Green, J., 2001. "Friction Damper Optimization: Simulation of Rainbow Tests". Journal of Engineeringfor Gas Turbines and Power, 123, p. 930.
Petrov, E., and Ewins, D., 2001. "Models of friction damping with variable normal load for time-domain analysis of vibrations". Proceedings of the Int'l Conference on Noise and Vibration Engineering (ISMA), ISMA.
Laxalde, D., Thouverez, R, Sinou, J., and Lombard, J., 2007. "Qualitative analysis of forced response of blisks with friction ring dampers". European Journal of Mechanics/A Solids, 26(4), pp. 676-687.
Poudou, O., and Pierre, C, 2003. "Hybrid frequency time domain methods for the analysis of complex structural systems with dry friction damping". Proceedings of the AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, New York, 1, pp. 111-124.
Ciǧeroǧlu, E., and Özgiiven, H., 2006. "Nonlinear vibration analysis of bladed disks with dry friction dampers". Journal of Sound and Vibration, 295(3-5), pp. 1028-1043.