EN 1993-1-9: Design of steel structures - Part 1-9: Fatigue, Brussels, Comité Européen de Normalisation (CEN); 2005.
prEN 1993-1-9: Design of steel structures - Part 1-9: Fatigue, Brussels, Comité Européen de Normalisation (CEN); 2023.
EN15512: Systèmes de stockage en acier – Systèmes de rayonnages à palettes réglables – Principe applicable au calcul des structures, Brussels, Comité Européen de Normalisation (CEN); 2020.
Majeed T., Assessment of the remaining fatigue life of a riveted steel railway bridge accounting for the mean stress [Paper presentation], ICSAS 2024, Rio de Janeiro, Brazil; 2024, June 5-8.
Skoglund, O., Leander, J., A numerical evaluation of new structural details for an improved fatigue strength of steel bridges. Int J Fatigue, 160, 2022, 106866, 10.1016/j.ijfatigue.2022.106866.
Mouradian K., Statistical evaluation of fatigue test results of butt-weld connections with imperfections [Paper presentation], NORDIC STEEL 2024, Lulea, Sweden; 2024, June 26-28.
Bartsch, H., Feldmann, M., Revision of fatigue detail categories of plain members and mechanically fastened joints according to EC3-1-9. J Constr Steel Res, 179, 2021, 106549, 10.1016/j.jcsr.2021.106549.
Christoforidou, A., Baskar, A., Barelts, E., Kavoura, F., Pavlovic, M., Fatigue performance of preloaded bolted connection with oversized holes. Ce/Pap 6:3–4 (2023), 1287–1292, 10.1002/cepa.2447.
Winkler, M., Dürr, A., Herion, S., Ladendorf, P., Fatigue tests on connections of hollow sections made of high-strength steel with shape-optimized gusset plates. Ce/Pap 6:3–4 (2023), 2429–2434, 10.1002/cepa.2309.
Misiek, T., S-N curve for screw fastenings of trapezoidal steel sheeting [Paper presentation], NORDIC STEEL 2024, Lulea, Sweden; 2024, June 26-28.
Li, X., Lin, H., Zhao, A., Wang, R., Feng, Z., Zhang, S., Wu, B., Wu, C., Xu, X., Experimental study on fatigue performance of double welded orthotropic steel bridge deck. J Constr Steel Res, 213, 2024, 108418, 10.1016/j.jcsr.2023.108418.
Ferraz, G., Karabulut, B., Rossi, B., Fatigue resistance and reliability assessment of hot dip galvanised plates with welded transversal stiffeners. Eng Fail Anal, 2024, 108577, 10.1016/j.engfailanal.2024.108577.
Bartsch, H., Drebenstedt, K., Seyfried, B., Feldmann, M., Kuhlmann, U., Ummenhofer, T., Analysis of fatigue test data to reassess EN 1993-1-9 detail categories. Steel Constr 13:4 (2020), 280–293, 10.1002/stco.202000019.
Bartsch, H., Feldmann, M., Report. Rev Detail Categ Lattice girder node Jt EC 3, 2021, 10.2749/christchurch.2021.0428.
Bartsch, H., Drebenstedt, K., Seyfried, B., Feldmann, M., Kuhlmann, U., Ummenhofer, T., Analysis of fatigue test data to reassess EN 1993-1-9 detail categories. Steel Constr 13:4 (2020), 280–293, 10.1002/stco.202000019.
Saufnay, L., Jaspart, J., Demonceau, J., Economic benefit of high strength steel sections for steel structures. Ce/Pap 4:2–4 (2021), 1543–1550, 10.1002/cepa.1454.
Saufnay, L., Demonceau, J., Establishment of reliable relative price predictions for high-strength steel members. Steel Constr, 2023, 10.1002/stco.202300013.
Saufnay, L., Demonceau, J., Economic and environmental assessment of high-strength steel grades. Ce/Pap 6:3–4 (2023), 527–532, 10.1002/cepa.2291.
De Jesus, A.M., Matos, R., Fontoura, B.F., Rebelo, C., Da Silva, L.S., Veljkovic, M., A comparison of the fatigue behaviour between S355 and S690 steel grades. J Constr Steel Res 79 (2012), 140–150, 10.1016/j.jcsr.2012.07.021.
Chen H., Grondin G.Y., Driver R.G. Fatigue resistance of high-performance steel. Structural engineering report no 258. Canada: University of Alberta; 2005.
Wang, P., Zhang, P., Wang, B., Zhu, Y., Xu, Z., Zhang, Z., Fatigue cracking criterion of high-strength steels induced by inclusions under high-cycle fatigue. J Mater Sci Technol 154 (2023), 114–128, 10.1016/j.jmst.2023.02.006.
Furuya, Y., Matsuoka, S., Abe, T., Yamaguchi, K., Scr Mater 46 (2002), 157–162.
Doubek, P., Kozáková, K., Kunz, L., Seitl, S., Fatigue life of S960 high strength steel with laser cladded functional surface layers. Eng Fail Anal, 164, 2024, 10.1016/j.engfailanal.2024.108629.
Souto, C., Gomes, V., Figueiredo, M., Correia, J., Lesiuk, G., Fernandes, A., De Jesus, A., Fatigue behaviour of thin-walled cold roll-formed steel sections. Int J Fatigue, 149, 2021, 106299, 10.1016/j.ijfatigue.2021.106299.
FASTCOLD, Fatigue strength of cold-formed structural steel details. Research Program of the Research Fund for Coal and Steel, Grant Agreement Number 745982.
Paralikas, J., Salonitis, K., Chryssolouris, G., Investigation of the effects of main roll-forming process parameters on quality for a V-section profile from AHSS. Int J Adv Manuf Technol 44:3–4 (2009), 223–237, 10.1007/s00170-008-1822-9.
EN ISO 377: Steel and steel products – Location and preparation of samples and test pieces for mechanical testing, European committee for standardization, Brussels, Belgium; 1997.
prEN 1993-1-3: Design of steel structures - Part 1-3: General rules – Supplementary rules for cold-formed members and sheeting, European committee for standardization, Brussels, Belgium; 2020.
Union Internationale des Chemins de fer, UIC 435-2 – Palettes en bois de type Europe (EUR), UIC; 2005.
Masendorf, R., Müller, C., Execution and evaluation of cyclic tests at constant load amplitudes–DIN50100:2016. MaterialsTesting 60:10 (2018), 961–968, 10.3139/120.111238.
Schijve, J., Fatigue of Structures and Material, Second ed., 2009, Springer Netherlands https://doi.org/10.1007/978-1-4020-6808-9.
Baptista, C., Reis, A., Nussbaumer, A., Probabilistic S-N curves for constant and variable amplitude. Int J Fatigue 101 (2017), 312–327, 10.1016/j.ijfatigue.2017.01.022.
Tong, L., Yu, Q., Zhao, X.L., Experimental study on fatigue behavior of butt-welded thin-walled steel plates strengthened using CFRP sheets. Thin-Walled Struct, 147, 2020, 10.1016/j.tws.2019.106471.
Kövesdi, B., Dunai, L., Fatigue life of girders with trapezoidally corrugated webs: an experimental study. Int J Fatigue 64 (2014), 22–32, 10.1016/j.ijfatigue.2014.02.017.
DIN50100: Load controlled fatigue testing – Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components (in German), Beuth, Berlin, Germany; 2016.
Vermeylen, M., Bezas, M., Crispin, M., Jaspart, J., Demonceau, J., Lateral-torsional buckling of beams made of mono-symmetrical thin-walled sections. Ce/Pap 6:3–4 (2023), 1649–1654, 10.1002/cepa.2358.
Vermeylen M., Bezas M., Morch H., Ginckels K., Demonceau J., Bolted connection between thin-walled and thick elements made of cold-formed section [Paper presentation], ICSAS 2024, Rio de Janeiro, Brazil; 2024, June 5-8.
Bezas, M.-Z., Vermeylen, M., Morch, H., Ginckels, K., Demonceau, J.-F., Design guidelines for SHS thin-walled columns with large holes at their extremities. Steel Constr, 2024, 10.1002/stco.202400024.
