Caulkin, R., Jia, X., Fairweather, M., Williams, R.A., Lattice approaches to packed column simulations (2008) Journ of Particuology, 6, pp. 404-411
Nabovati, A., Llewellin, E.W., Sousa, A.C.M., A general model for the permeability of fibrous porous media based on fluid flow simulations using the lattice Boltzmann method (2009) Composites Part A: Appl. Sci. Manufactur., 40, pp. 860-869
Marchot, P., Toye, D., Crine, M., Pelsser, A.-M., L'Homme, G., Investigation of liquid maldistribution in packed columns by x-ray tomography (1999) Trans. Inst. Chem. Eng, 77, pp. 131-142
Calvo, S., Beugre, D., Crine, M., Lonard, A., Marchot, P., Toye, D., Phase distribution measurements in metallic foam packing using x-ray radiography and micro-tomography (2009) Chem. Eng Process: Process Intensification, 48, pp. 1030-1039
Higuera, F.J., Jimnez, J., Boltzmann approach to lattice gas simulations (1989) Europhys. Lett., 9 (663)
McNamara, G., Zanetti, G., Use of the Boltzmann equation to simulate lattice-gas automata (1988) Phys. Rev. Lett., 61 (2332)
Yu, D., Mei, R., Luo, L.-S., Shyy, W., Viscous flow computations with the method of lattice Boltzmann equation (2003) Prog. Aerosp. Sci., 39 (329)
Chen, H., Chen, S., Matthaeus, W.H., Recovery of the NavierStokes equations using a lattice-gas Boltzmann method (1992) Phys. Rev, A, 45, pp. R5339
Bhatnagar, P.L., Gross, E.P., Krook, M., A model for collision process in gases. I. Small amplitude process in charged and neutral one-component systems (1954) Phys. Rev., 94 (511)
He, X., Luo, L.-S., Lattice Boltzmann model for incompressible NavierStokes equation (1997) J. Comput. Phys., 88 (927)
Chapman, E., Cowling, T.G., (1970) The Mathematical Theory of Non-Uniform Gases, , Cambridge University Press
D'Humires, D., Generalized lattice Boltzmann equations (1992) Rarefied Gas Dynamics: Theory and Simulations, 159, pp. 450-458
D'Humires, D., Ginzburg, I., Krafczyk, M., Lallemand, P., Luo, L.-S., Multiple-relaxation-time lattice Boltzmann models in three dimensions (2002) Proc. R. Soc. Lond. Ser., A, 360, p. 437
Yu, H., Luo, L.-S., Girimaji, S.S., Les of turbulent square jet flow using an mrt lattice Boltzmann model (2006) Computers and Fluids, 35, pp. 957-965
Dullien, F.A.L., (1979) Porous Media Fluid Transport and Pore Structure, , Academy Press, INC. Waterloo Ontario, Canada
Comiti, J., Experimental characterization of flow regimes in various porous media-iii: Limit of Darcy's or creeping flow regime for Newtonian and purely viscous non-Newtonian fluids (2000) Chem. Eng. Sci., 55, pp. 3057-3061
Dethier, G., Briquet, C., Marchot, P., De Marneffe, P.A., A grid-enable lattice Boltzmann based modelling system (2007) Proc. International Conference on Parallel Processing and Applied Mathematics, , Gdansk, Poland
Ginzburg, I., D'Humires, D., Multireflection boundary conditions for lattice Boltzmann models (2003) Phys. Rev. E, 68. , 066614
Comiti, J., Renaud, M., A new model for determining mean structure parameters of fixed beds from pressure drop measurements: Application to beds packed with parallelepipedal particles (1989) Chem. Engrg. Sci., 44, pp. 1539-1545
Edouard, D., Lacroix, M., Huu, C.P., Luck, F., Pressure drop modeling on solid foam: State-of-the art correlation (2008) Chem. Eng. Sci., 144, pp. 299-311
Seguin, D., Montillet, A., Comiti, J., Experimental characterisation of flow regimes in various porous media-I: Limit of laminar flow regime (1998) Chemical Engineering Science, 53 (21), pp. 3751-3761. , PII S0009250998001754
Zhaoli, G., Zhao, T.S., Lattice Boltzmann model for incompressible flows through porous media (2002) Phys. Rev. e, 66. , 036304
Hongqing, C., Hao, Y., Yong, T., Minqiang, P., Feng, P., Hongjuan, W., Jian, Y., Assessment and optimization of the mass-transfer limitation in a metal foam methanol microreformer (2008) Applied Catalysis A: General, 337, pp. 155-162
Wenmakers, P.W.A.M., Van Der Schaaf, J., Kuster, B.F.M., Schouten, J.C., Hairy foam: Carbon nanofibers grown on solid carbon foam: A fully accessible, high surface area, graphitic catalyst support (2008) J. Mater. Chem., 18, pp. 2426-2436
