Profil

Marchot Pierre

Department of Chemical Engineering

See author's contact details
Main Referenced Co-authors
Crine, Michel  (185)
Toye, Dominique  (130)
L'Homme, Guy  (58)
Léonard, Angélique  (54)
Blacher, Silvia  (28)
Main Referenced Keywords
X-ray microtomography (11); X-ray tomography (11); x-ray tomography (8); distillation (6); hydrodynamics (6);
Main Referenced Unit & Research Centers
Laboratoire de Génie Chimique (4)
Centre for Education and Research on Macromolecules (CERM), Faculty of Sciences, ULiège (2)
Laboratory of Chemical Engineering (LGC), Faculty of Applied Sciences, ULiège (2)
Faculty of Applied Sciences, Laboratory of Chemical Engineering, ULG (1)
Laboratoire de Génie chimique (1)
Main Referenced Disciplines
Chemical engineering (190)
Materials science & engineering (19)
Environmental sciences & ecology (8)
Computer science (5)
Chemistry (5)

Publications (total 203)

The most downloaded
1421 downloads
Marchot, P., Toye, D., Pelsser, A. M., Crine, M., L'Homme, G., & Olujic, Z. (2001). Liquid distribution images on structured packing by X-ray computed tomography. AIChE Journal, 47 (6), 1471-1476. doi:10.1002/aic.690470622 https://hdl.handle.net/2268/25030

The most cited

120 citations (Scopus®)

Fransolet, E., Crine, A., Marchot, P., & Toye, D. (November 2005). Analysis of gas holdup in bubble columns with non-Newtonian fluid using electrical resistance tomography and dynamic gas disengagement technique. Chemical Engineering Science, 60 (22 Sp. Iss. SI), 6118-6123. doi:10.1016/j.ces.2005.03.046 https://hdl.handle.net/2268/22135

Große Daldrup, A., Crine, M., Marchot, P., Toye, D., & Kenig, E. Y. (2019). An approach to separation efficiency modelling of structured packings based on X-ray tomography measurements: Application to aqueous viscous systems. Chemical Engineering Science, 204, 310-319. doi:10.1016/j.ces.2019.03.059
Peer Reviewed verified by ORBi

Fransolet, E., Crine, M., L'Homme, G., Toye, D., & Marchot, P. (2014). Analysis of electrical resistance tomography measurements obtained in a bubble column: Dynamics aspects, first results. In R. Mann, D. Mewes, ... P. Ronson (Eds.), Proceedings of 2nd World Congress on Industrial Process Tomography, Hanovre, Germany, 29-31 août 2001 (pp. 667-684). Manchester, United Kingdom: Virtual Centre for Industrial Process Tomography.
Peer reviewed

Janzen, A., Steube, J., Crine, M., Marchot, P., Toye, D., & Kenig, E. (2014). Influence of liquid viscosity on separation efficiency of structured packings – modelling approach based on X-ray tomography investigations. In Proceedings.
Peer reviewed

Janzen, A., Steube, J., Kenig, E., Crine, M., Marchot, P., & Toye, D. (2014). Investigation of the influence of packing geometry and of liquid viscosity on the liquid flow morphology by using X-ray tomography. In Proceedings of the 7th World Congress on Industrial Process Tomography (pp. 907-916).
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2014). X-ray microtomography: A new tool to follow soft material shrinkage during convective drying. In 2nd World Congress on Industrial Process Tomography : Hannover, Germany 29-31 août 2001 (pp. 110-117). International Society for Industrial Process Tomography.
Peer reviewed

Janzen, A., Steube, J., Aferka, S., Crine, M., Marchot, P., Toye, D., & Kenig, E. (April 2013). Influence of viscosity on liquid flow and separation efficiency of structured packings – hydrodynamic analogy modelling approach based on X-ray tomography investigations [Poster presentation]. 9th European Congress of Chemical Engineering / 2nd European Congress of Applied Biotechnology, The Hague, The Netherlands, The Hague, Netherlands.

Janzen, A., Steube, J., Aferka, S., Kenig, E., Crine, M., Marchot, P., & Toye, D. (2013). Investigation of liquid flow morphology inside a structured packing using X-ray tomography. Chemical Engineering Science, 12, 451-460. doi:10.1016/j.ces.2013.08.035
Peer Reviewed verified by ORBi

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (01 June 2012). Autocorrelation and the rose diagram for analyzing structure and anisotropy in polymer foams [Paper presentation]. Avizo European User Group Meeting, Mérignac, France.

Janzen, A., Steube, J., Aferka, S., Toye, D., Marchot, P., & Kenig, E. (March 2012). Modellierung des Trennverhaltens wässriger Systeme in Packungskolonnen basierend auf tomographischen [Paper presentation]. Jahrestreffen der ProcessNet-Fachausschüsse "Computational Fluid Dynamics" und "Fluidverfahrenstechnik“, Weimar, Germany.

Aferka, S., Steube, J., Janzen, A., Kenig, E., Crine, M., Marchot, P., & Toye, D. (2012). Investigation of liquid flow pattern inside a structured packing using X-ray tomography. In Proceedings of the 6th International Symposium on Process Tomography, Cape Town, South Africa (pp. 8).
Peer reviewed

Aferka, S., Steube, J., Janzen, A., Kenig, E., Crine, M., Marchot, P., & Toye, D. (2011). Mesure par tomographie à rayons X de l’influence de la viscosité sur la distribution du liquide dans une colonne à empilage structuré. In In SFGP (Ed.), Récents Progrès en Génie des Procédés - N° 101 - Des procédés au service du produit au coeur de l'Europe - Actes du XIIIème Congrès de la société Française de Génie des Procédés - Du 29 Nov. au 1er Décembre 2011 - Lille Grand Palais, FRANCE (pp. 6). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Plougonven, E., Tran, M. P., Marchot, P., Detrembleur, C., Thomassin, J.-M., & Léonard, A. (29 November 2011). Caractérisation microstructurale de mousses polymères nanocomposites par microtomographie à rayons X [Poster presentation]. 13ème congrès de la Société Française de Génie des Procédés, Lille, France.

Beugre, D., Calvo, S., Crine, M., Toye, D., & Marchot, P. (2011). Simulation d’un écoulement de gaz dans un empilage structuré par la méthode des réseaux de Boltzmann. In SFGP (Ed.), Récents Progrès en Génie des Procédés - N° 101 - Des procédés au service du produit au coeur de l'Europe - Actes du XIIIème Congrès de la société Française de Génie des Procédés - Du 29 Nov. au 1er Décembre 2011 - Lille Grand Palais, FRANCE. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Beugre, D., Calvo, S., Crine, M., Toye, D., & Marchot, P. (15 November 2011). Gas Flow Simulations in a Structured Packing by Lattice Boltzmann Method [Paper presentation]. Advanced COmputational Methods in ENgineering, ACOMEN 2011, Liège, Belgium.

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (21 September 2011). Microstructure characterisation of nanocomposite polymeric foams by X-ray microtomography [Poster presentation]. 4th International Workshop on Process Tomography, Chengdu, China.

Plougonven, E., Marchot, P., Detrembleur, C., Tran, M. P., & Léonard, A. (2011). Methodology for the characterization of the microstructure of nanocomposite polymeric foams using X-ray microtomography. In Micro-CT User Meeting Abstract Book.

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2011). X-ray CT study of the influence of liquid viscosity on fluid phase distribution in modular catalytic packings. Chemical Engineering Transactions, 24, 1429-1434. doi:10.3303/CET1124239
Peer Reviewed verified by ORBi

Viva, A., Aferka, S., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2011). Processing of X-ray tomographic images: a procedure adapted for the analysis of phase distribution in MellapakPlus 752.Y and Katapak-SP packings. Flow Measurement and Instrumentation, 22, 279-290. doi:10.1016/j.flowmeasinst.2011.03.008
Peer Reviewed verified by ORBi

Dethier, G., de Marneffe, P.-A., & Marchot, P. (2011). Lattice Boltzmann Simulation Code Optimization Based on Constant-time Circular Array Shifting. Procedia Computer Science, 4, 1004-1013. doi:10.1016/j.procs.2011.04.106
Peer reviewed

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2011). Tomographic measurement of liquid hold up and effective interfacial area distributions in a column packed with high performance structured packings. Chemical Engineering Science, 66, 3413-3422. doi:10.1016/j.ces.2011.01.022
Peer Reviewed verified by ORBi

Viva, A., Aferka, S., Toye, D., Marchot, P., Crine, M., & Brunazzi, E. (2011). Determination of liquid hold-up and flow distribution inside modular catalytic structured packings. Chemical Engineering Research and Design, 89, 1414-1426. doi:10.1016/j.cherd.2011.02.009
Peer Reviewed verified by ORBi

Beugre, D., Calvo, S., Crine, M., Toye, D., & Marchot, P. (2011). Gas Flow Simulations in a Structured Packing by Lattice Boltzmann Method. Chemical Engineering Science, 66, 3742-3752. doi:10.1016/j.ces.2011.02.049
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., & Crine, M. (28 October 2010). X-ray tomography : a key for revealing local behavior of fluids in packed beds [Paper presentation]. Séminaire donné au Department of Fluid Process Engineering, Faculty of Mechanical Engineering, University of Paderborn, Germany, Paderborn, Germany.

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2010). Liquid load point determination in a reactive distillation packing by x-ray tomography. Canadian Journal of Chemical Engineering, 88 (4), 611-617. doi:10.1002/cjce.20320
Peer Reviewed verified by ORBi

Viva, A., Aferka, S., Toye, D., Marchot, P., Crine, M., & Brunazzi, E. (2010). Measurement of liquid hold-up in catalytic structured packings: comparison of different experimental techniques. In A. B. de Haan, H. Kooijman, ... A. Gorak (Eds.), Proceedings of 9th Distillation and Absorption Conference (DA2010), Eindhoven, Pays-Bas, 12-15 septembre 2010.
Peer reviewed

Kouakou, E., Marchot, P., & Crine, M. (2010). Analysis of the Gas Holdup Evolution in a Circulating Jet-Loop Nitrifying MBR. International Journal of Chemical Reactor Engineering, 8 (1).
Peer Reviewed verified by ORBi

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2010). Influence of the viscosity on liquid hold-up in modular catalytic packings [Paper presentation]. 19th Congress of Chemical and Process Engineering (CHISA2010) – 7th European Congress of Chemical Engineering (ECCE7), 28 aout–2 septembre 2010, Prague, Czechia.

Calvo, S., Beugre, D. A., Crine, M., Marchot, P., & Toye, D. (2010). Comparison of hydrodynamic parameters obtained by 2D measurements in a flat rectangular column with X-ray radiography and data from literature on 3D columns [Poster presentation]. 19th Congress of Chemical and Process Engineering (CHISA2010) – 7th European Congress of Chemical Engineering (ECCE7), 28 aout–2 septembre 2010, Prague, Czechia.

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (2010). Liquid hold-up measurement in Mellapak Plus 752Y packed bed using X-ray tomography. In VCIPT (Ed.), Proceedings of 6th World Congress On Industrial Process Tomography (WCIPT6), Beijing, China, 6-9 Septembre 2010. Manchester, United Kingdom: Virtual Centre for Industrial Process Tomography.
Peer reviewed

Verdin, E., Beugre, D. A., Parra, J. B., Toye, D., Marchot, P., Ania, C. O., & Léonard, A. (2010). Lattice Boltzmann 3D flow simulation based on X-ray microtomographic images of activated carbon beds [Poster presentation]. FOA10- 10th Internationnal Conference on Fundamentals of adsorption, 23-28 Mai 2010, Hyogo, Japan.

Aferka, S., Viva, A., Toye, D., Marchot, P., Crine, M., & Brunazzi, E. (2010). X-ray CT study of the influence of liquid viscosity on fluid phase distribution in modular catalytic packings. AIDIC Conference series, 10, 373-382. doi:10.3303/ACOS111004
Peer reviewed

Toye, D., Galifi, A., Salmon, T., Marchot, P., Verdin, E., & Crine, M. (2010). Influence of medium composition on oxygen transfer rate in animal cell culture. Canadian Journal of Chemical Engineering, 88 (4), 671-676. doi:10.1002/cjce.20302
Peer Reviewed verified by ORBi

Aferka, S., Marchot, P., Crine, M., & Toye, D. (2010). Interfacial area measurement in a catalytic distillation packing using high energy x-ray CT. Chemical Engineering Science, 65 (1), 511-516. doi:10.1016/j.ces.2009.05.048
Peer Reviewed verified by ORBi

Aferka, S., Viva, A., Brunazzi, E., Marchot, P., Crine, M., & Toye, D. (August 2009). Liquid load point measurement in a reactive distillation packing by x-ray tomography [Poster presentation]. 8th World Congress on Chemical Engineering, Montreal, Canada.

Almazan, M. D. C., Léonard, A., López-Garzón, J., Abdullah, J., Marchot, P., & Blacher, S. (2009). 3D characterisation of the structure of activated carbon packed beds using X-ray microtomography. In 3rd International Workshop on Process Tomography (CD Rom).

Dethier, G., Marchot, P., & de Marneffe, P.-A. (2009). Distributed Dynamic Load Balancing for Iterative-Stencil Applications. In Cracow Grid Workshop '08 Proceedings (pp. 303-310).
Peer reviewed

Jacquin, O., Balbeur, D., Damblon, C., Marchot, P., De Pauw, E., Roberts, G. C. K., Frère, J.-M., & Matagne, A. (2009). Positively Cooperative Binding of Zinc Ions to Bacillus cereus 569/H/9 beta-Lactamase II Suggests that the Binuclear Enzyme Is the Only Relevant Form for Catalysis. Journal of Molecular Biology, 392 (5), 1278-1291. doi:10.1016/j.jmb.2009.07.092
Peer Reviewed verified by ORBi

Calvo, S., Beugre, D. A., Crine, M., Léonard, A., Marchot, P., & Toye, D. (2009). Phase distribution measurements in metallic foam packing using X-ray radiography and micro-tomography. Chemical Engineering and Processing: Process Intensification, 48 (5), 1030-1039. doi:10.1016/j.cep.2009.02.001
Peer Reviewed verified by ORBi

Caulkin, R., Jia, X., Xu, C., Fairweather, M., Williams, R. A., Stitt, H., Nijemeisland, M., Aferka, S., Crine, M., Léonard, A., Toye, D., & Marchot, P. (2009). Simulations of Structures in Packed Columns and Validation by X-ray Tomography. Industrial and Engineering Chemistry Research, 48 (1), 202-213. doi:10.1021/ie800033a
Peer Reviewed verified by ORBi

Beugre, D. A., Calvo, S., Dethier, G., Crine, M., Toye, D., & Marchot, P. (2009). Lattice Boltzmann 3D flow simulations on a metallic foam. Journal of Computational and Applied Mathematics. doi:10.1016/j.cam.2009.08.100
Peer Reviewed verified by ORBi

Verdin, E., Beugre, D. A., Ania, C., Parra, J., Toye, D., Marchot, P., Crine, M., & Léonard, A. (2009). Simulation de l’écoulement dans des filtres à charbons actifs par la méthodologie des réseaux de Boltzmann. In SFGP (Ed.), Récents Progrès en Génie des Procédés - N°98 - A la croisée des sciences et des cultures pour relever les défis industriels du XXIème siècle - Actes du 12ème Congrès de la Société Française de Génie des Procédés, Marseille, France, 14-16 octobre 2009. Paris, France: Lavoisier - Technique et Documentation.
Peer reviewed

Dethier, G., Briquet, C., Marchot, P., & de Marneffe, P.-A. (2008). LBG-SQUARE - Fault Tolerant, Locality-Aware Co-allocation in P2P Grids. In Z. Huang, Z. Xu, N. Rountree, L. Lefevre, H. Shen, J. Hine, ... Y. Pan (Eds.), Ninth International Conference On Parallel And Distributed Computing, Applications And Technologies : PDCAT 2008 (pp. 252-258). Los Alamitos, United States - California: IEEE Computer Society. doi:10.1109/PDCAT.2008.24
Peer reviewed

Dethier, G., Marchot, P., & de Marneffe, P.-A. (May 2008). Architecture of a Grid-Enabled Lattice-Boltzmann Middleware [Poster presentation]. Advanced COmputational Methods in ENgineering (Acomen) 2008, Liège, Belgium.

Léonard, A., Meneses, E., Le Trong, E., Salmon, T., Marchot, P., Toye, D., & Crine, M. (10 February 2008). Influence of Back Mixing on the Convective Drying of Residual Sludges in a Fixed Bed. Water Research, 42 (10-11), 2671-2677. doi:10.1016/j.watres.2008.01.020
Peer Reviewed verified by ORBi

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2008). In situ observation of wall effects in activated carbon filters by X-ray microtomography. Separation and Purification Technology, 64 (1), 127-130. doi:10.1016/j.seppur.2008.08.008
Peer Reviewed verified by ORBi

Aferka, S., Marchot, P., Crine, M., & Toye, D. (2008). Interfacial area measurement in a Katapak™ SP12 catalytic distillation column using high energy X-ray CT. In CHISA 2008 - 18th International Congress of Chemical and Process Engineering.
Peer reviewed

Léonard, A., Toye, D., Marchot, P., & Crine, M. (November 2007). Applications de la microtomographie à rayons X en génie des procédés [Paper presentation]. Séminaire donné à "l’Université Libre de Bruxelles, Service de Génie Chimique, Bruxelles, Belgium.

Léonard, A., Toye, D., Marchot, P., & Crine, M. (2007). Intérêt de la microtomographie à rayons X pour la formulation de produits agroalimentaires. In SFGP (Ed.), Récents progrès en génie des procédés N° 96 2007 : actes du 11° Congrès de la Société Française de Génie des Procédés 9-10-11 Octobre 2007, Saint-Étienne, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Léonard, A., Wullens, H., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Visualisation d'effets de paroi dans des lits de charbon actif par microtomographie à rayons X. In SFGP (Ed.), Récents progrès en génie des procédés N° 96 2007 : actes du 11° Congrès de la Société Française de Génie des Procédés 9-10-11 Octobre 2007, Saint-Étienne, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Dethier, G., Marchot, P., de Marneffe, P.-A., & Briquet, C. (2007). A Grid-enabled Lattice-Boltzmann-based modelling system. In R. Wyrzykowski, J. Dongarra, K. Karczewski, ... J. Wasniewski (Eds.), Parallel Processing and Applied Mathematics (pp. 1275-1284). Heidelberg, Germany: Springer. doi:10.1007/978-3-540-68111-3_135
Peer reviewed

Jia, X., Xu, C., Caulkin, R., Williams, R. A., Stitt, H., Nijemeisland, M., Aferka, S., Crine, M., Léonard, A., Toye, D., & Marchot, P. (2007). Validation of DigiPac Simulations of packed columns using x-ray microtomography. In H. Mc Cann & G. A. Johansen (Eds.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (pp. 382-389). Virtual Centre for Industrial Process Tomography.
Peer reviewed

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Observation of wall effects in activated carbon filters by x-ray µCT. In H. Mc Cann & G. A. Johansen (Eds.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (pp. 342-347). Virtual Centre for Industrial Process Tomography.
Peer reviewed

Toye, D., Aferka, S., Calvo, S., Léonard, A., Crine, M., Saroha, A., & Marchot, P. (2007). Mesure de la distribution des phases dans une mousse métallique par radiographie et micro-tomographie à rayons X. In Récents Progrès en Génie des Procédés - N°95 - Actes des 5èmes Journées francophones sur les réacteurs gaz-liquide et gaz-liquide-solide, 12-15 juin 2007, Carry-le-Rouet, France. Paris, France: Lavoisier - Technique et Documentation.
Peer reviewed

Toye, D., Aferka, S., Calvo, S., Léonard, A., Crine, M., Saroha, A., & Marchot, P. (2007). Phase distribution measurements in metallic foam using x-ray radiography and micro-tomography. In G. A. Johansen & H. Mc Cann (Ed.), Proceedings of the 5th World Congress on Industrial Process Tomography, Bergen, Norway, September 6-9, 2007 (CD-ROM) (pp. 761-767). Virtual Centre for Industrial Process Tomography.
Peer reviewed

Abdullah, J., Aferka, S., Crine, M., Saroha, A. K., Toye, D., & Marchot, P. (2007). Investigating the liquid distribution in a reactive distillation packing using high energy x-ray tomography. AIP Conference Proceedings, 914, 760-766. doi:10.1063/1.2747510
Peer Reviewed verified by ORBi

Aferka, S., Crine, M., Saroha, A. K., Toye, D., & Marchot, P. (2007). In situ measurements of the static liquid holdup in Katapak-SP12 (TM) packed column using X-ray tomography. Chemical Engineering Science, 62 (21), 6076-6080. doi:10.1016/j.ces.2007.06.025
Peer Reviewed verified by ORBi

Calvo, S., Beugre, D. A., Aferka, S., Saroha, A., Toye, D., Crine, M., & Marchot, P. (2007). Modélisation d'un écoulement diphasique au sein d'un empilage structuré. In SFGP (Ed.), Récents Progrès en Génie des procédés - N°96 - Des réponses industrielles pour une société en mutation - Actes du 11ème Congrès de la Société française de Génie des procédés - 9-11 octobre 2007, Saint Etienne, France. Lavoisier Technique et Documentation.
Peer reviewed

Aferka, S., Saroha, A., Toye, D., Crine, M., & Marchot, P. (2007). Mesure de la distribution des phases dans une colonne de distillation réactive par tomographie à rayons X. In Récents Progrès en Génie des Procédés - N°95 - Actes des 5èmes Journées francophones sur les réacteurs gaz-liquide et gaz-liquide-solide, 12-15 juin 2007, Carry-le-Rouet, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Lecocq, R., Calvo, S., Saroha, A., Toye, D., Crine, M., & Marchot, P. (2007). Simple heuristic model of an aerosol filter. In SFGP (Ed.), Récents Progrès en Génie des procédés - N°96 - Des réponses industrielles pour une société en mutation - Actes du 11ème Congrès de la Société francophone de Génie des Procédés, 9-11 octobre 2007, Saint-Etienne, France. Lavoisier Technique et Documentation.
Peer reviewed

Marchot, P., Beugre, D. A., Crine, M., Dethier, G., Léonard, A., & Toye, D. (2007). Lattice Boltzmann 3D flow simulations in a hepa aerosol filter, on a computing grid [Paper presentation]. ECCE6 - 6th European Congress of Chemical Engineering, 16-21 septembre 2007, Copenhague, Denmark.

Léonard, A., Wullens, H., Blacher, S., Marchot, P., Toye, D., Crine, M., & Lodewyckx, P. (2007). Observation of wall effects in activated carbon filters by X-ray μCT. In 5th World Congress in Industrial Process Tomography (pp. 342-347). International Society for Industrial Process Tomography.
Peer reviewed

Léonard, A., Toye, D., Marchot, P., & Crine, M. (26 October 2006). Application des techniques tomographiques en génie des procédés [Paper presentation]. Séminaire donné à "l’École des Mines d’Albi-Carmaux, Centre Rapsodee, Albi, France.

Léonard, A., Blacher, S., Marchot, P., Crine, M., & Lodewyckx, P. (2006). Study of organic and water vapours adsorption on carbon filters by X-ray microtomography. In Fourth International Symposium on Process Tomography in Poland, 2006, Varsóvia. Varsovia, Poland: Warsaw University of Technology.
Peer reviewed

Lecocq, R., Léonard, A., Toye, D., Crine, M., & Marchot, P. (September 2006). Simulation of transport processes in fiber filters: Combining a lattice Boltzmann CFD method and a particle tracking method [Poster presentation]. µTomo3D, BVM/SBM Symposium on Electron/X-ray Tomography and 3D Image Processing, Leuven, Belgium.

Léonard, A., Marchot, P., Pirard, J.-P., Crine, M., & Blacher, S. (September 2006). Use of x-ray microtomography coupled to image analysis for cracks detection and quantification [Poster presentation]. IAMG’2006 Annual Conference, Liège, Belgium.

Alié, C., Ferauche, F., Léonard, A., Lambert, S., Tcherkassova, N., Heinrichs, B., Crine, M., Marchot, P., Loukine, E., & Pirard, J.-P. (15 March 2006). Pd-Ag/SiO2 xerogel catalyst forming by impregnation on alumina foams. Chemical Engineering Journal, 117 (1), 13-22. doi:10.1016/j.cej.2005.11.011
Peer Reviewed verified by ORBi

Toye, D., Fransolet, E., Léonard, A., Crine, M., & Marchot, P. (14 March 2006). Techniques tomographiques : des outils de choix pour l’étude des réacteurs polyphasiques [Paper presentation]. Journée thématique « Les avancées des métrologies pour les réacteurs polyphasiques », Paris, France.

Toye, D., Fransolet, E., Crine, M., & Marchot, P. (14 March 2006). Techniques tomographiques : des outils de choix pour l’étude des réacteurs polyphasiques [Paper presentation]. Journée thématique « Les avancées des métrologies pour les réacteurs polyphasiques », Paris, France.

Lecocq, R., Calvo, S., Saroha, A., Toye, D., Crine, M., & Marchot, P. (2006). Simple heuristic model of an aerosol filter [Poster presentation]. 17th International Congress of Chemical and Process Engineering –CHISA 2006, 27-31 août 2006, Prague, Czechia.

Aferka, S., Saroha, A., Toye, D., Crine, M., & Marchot, P. (2006). Liquid distribution through a Katapak column by X-ray tomography [Paper presentation]. PROCTOM2006 - 4th International Symposium on Process Tomography in Poland, September 14-15, 2006, Warsaw, Poland.

Aferka, S., Saroha, A., Toye, D., Marchot, P., & Crine, M. (2006). Liquid flow distribution in catalytic distillation columns : use of high-energy X-ray tomography. In AIChE (Ed.), AIChE Annual Meeting, Conference Proceedings, San Francisco, CA, United States, Nov. 12-17, 2006. New Yourk, United States - New York: American Institute of Chemical Engineers.
Peer reviewed

Kouakou, E., Salmon, T., Marchot, P., & Crine, M. (2006). Influence of operating parameters on nitrite. In Proceeding of the International Symposium on Environmental Biotechnology.
Peer reviewed

Fransolet, E., Marchot, P., Crine, M., & Toye, D. (2006). Flow pattern characteristics in a stirred tank in presence of a non-Newtonian fluid and a rotor-stator mixer using particle image velocimetry [Poster presentation]. TRACER 4 - Fourth International Conference On Tracers and Tracing Methods, 3-5 Octobre 2006, Autrans, France.

Kouakou, E., Pirard, J.-P., Marchot, P., & Crine, M. (2006). Etude du colmatage dans un bioréacteur membranaire à recirculation externe utilisé en nitrification partielle. In Proceedings of MEMPRO 3 - Intégration des membranes dans les procédés.
Peer reviewed

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2006). Caractérisation des écoulements en présence d’un agitateur rotor-stator et d’un fluide non newtonien en cuve agitée par vélocimétrie par images de particules [Poster presentation]. 10ème Congrès Francophone de Vélocimétrie Laser, 19-22 septembre 2006, Toulouse, France.

Aferka, S., Saroha, A., Toye, D., Marchot, P., & Crine, M. (2006). Liquid flow distribution in catalytic distillation columns: Use of high energy X-ray tomography. In AIChE, AIChE Annual Meeting, Conference Proceedings. United States: AIChE.
Peer reviewed

Fransolet, E., Crine, A., Marchot, P., & Toye, D. (November 2005). Analysis of gas holdup in bubble columns with non-Newtonian fluid using electrical resistance tomography and dynamic gas disengagement technique. Chemical Engineering Science, 60 (22 Sp. Iss. SI), 6118-6123. doi:10.1016/j.ces.2005.03.046
Peer Reviewed verified by ORBi

Toye, D., Crine, M., & Marchot, P. (November 2005). Imaging of liquid distribution in reactive distillation packings with a new high-energy x-ray tomograph. Measurement Science and Technology, 16 (11), 2213-2220. doi:10.1088/0957-0233/16/11/012
Peer Reviewed verified by ORBi

Kouakou, E., Salmon, T., Toye, D., Marchot, P., & Crine, M. (November 2005). Gas-liquid mass transfer in a circulating jet-loop nitrifying MBR. Chemical Engineering Science, 60 (22 Sp. Iss. SI), 6346-6353. doi:10.1016/j.ces.2005.04.025
Peer Reviewed verified by ORBi

Lecocq, R., Toye, D., Maquet, V., Léonard, A., Marchot, P., Jérôme, R., & Crine, M. (October 2005). Étude de la texture poreuse d'un matériau polymère cellulaire utilisé en ingénierie tissulaire par microtomographie à rayons X [Poster presentation]. 7èmes Journées d'Etude sur les Milieux Poreux ­ JEMP2005, Bordeaux, France.

Lecocq, R., Toye, D., Maquet, V., Léonard, A., Marchot, P., Jérôme, R., & Crine, M. (October 2005). Analyse quantitative de la texture poreuse d'un matériau polymère cellulaire basée sur des images de microtomographie à rayons X [Poster presentation]. Imageries et polymères, Bordeaux, France.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (June 2005). Image analysis of X-ray microtomograms of soft materials during convective drying: 3D measurements. Journal of Microscopy, 218 (Pt 3), 247-252. doi:10.1111/j.1365-2818.2005.01485.x
Peer Reviewed verified by ORBi

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (February 2005). Moisture profiles determination during convective drying using x-ray microtomography. Canadian Journal of Chemical Engineering, 83 (1), 127-131. doi:10.1002/cjce.5450830121
Peer Reviewed verified by ORBi

Toye, D., Abdullah, J. D., Crine, M., & Marchot, P. (2005). 3D imaging of reactive distillation packings with a new high energy x-ray tomograph. In A. Jong, M. Takei, R. A. William, ... M. Zeidan (Eds.), Proceedings of 4th World Congress in Industrial Process Tomography (WCIPT4), Aizu, Japan, 5-8 septembre 2005 (pp. 458-463). Manchester, United Kingdom: Virtual Centre for Industrial Process Tomography.
Peer reviewed

Toye, D., Fransolet, E., Simon, D., Crine, M., L'Homme, G., & Marchot, P. (2005). Possibilities and limits of application of electrical resistance tomography in hydrodynamics of bubble columns. Canadian Journal of Chemical Engineering, 83 (1), 4-10. doi:10.1002/cjce.5450830103
Peer Reviewed verified by ORBi

Toye, D., Le Trong, E., Marchot, P., & Crine, M. (2005). High energy, high resolution x-ray tomography applied to catalytic distillation packings [Paper presentation]. CHEMCON2005 – 58th annual session of Indian Institute of chemical engineers, 14-17 décembre 2005, New Delhi, India.

Kouakou, E., Salmon, T., Fransolet, E., Toye, D., Marchot, P., & Crine, M. (2005). Transfert de matière gaz-liquide et mélange dans un réacteur membranaire à recirculation interne. In C. Azzaro-Pantel, J. Bertrand, M. Cabassud, C. Frances, M. Poux, H. Roux-de Balmann, ... C. Xuereb (Eds.), Récents Progrès en Génie des procédés - N°92 - Le Génie des Procédés vers de nouveaux espaces, Actes du 10ème Congrès de la Société Française de Génie des Procédés, 20-22 septembre 2005, Toulouse, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2005). Evolution de l'écoulement de fluides non-newtoniens avec le temps d'agitation en cuve agitée par vélocimétrie par images de particules. In SFGP (Ed.), Récents Progrès en Génie des procédés - N°92 - Le Génie des Procédés vers de nouveaux espaces, Actes du 10ème Congrès de la Société Française de Génie des Procédés, 20-22 septembre 2005, Toulouse, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Khoder Agha, R., De Weireld, G., Frère, M., Vanderhaeghen, J.-Y., Gilles, F., Su, B.-L., Salmon, T., Toye, D., Marchot, P., & Crine, M. (2005). Integrated adsorbent and process characterization. Application to air separation PSA processes [Paper presentation]. COPS VII - 7th International Symposium on the Characterisation of Porous Solids, 26-28 mai 2005, Aix-en-Provence, France.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2005). Convective drying of wastewater sludges: Influence of air temperature, superficial velocity, and humidity on the kinetics. Drying Technology, 23 (8), 1667-1679. doi:10.1081/DRT-200065082
Peer Reviewed verified by ORBi

Le Trong, E., Toye, D., Marchot, P., & Crine, M. (2005). Utilisation d’un nouveau tomographe à haute énergie pour extraire l’information structurale d’un échantillon de dévésiculeur [Poster presentation]. Journées d'Etude sur les Milieux Poreux – JEMP2005, 26-27 Octobre 2005, Bordeaux, France.

Kouakou, E., Salmon, T., Toye, D., Marchot, P., & Crine, M. (2005). Mass transfer, mixing and gas hold-up in a circulating jet-loop nitrifying MBR. In Proceedings of 7th World Congress of Chemical Enginnering - WCCE7, Glasgow, Scotland, 10-14 July 2005. Rugby, United Kingdom: Institution of Chemical Engineers.
Peer reviewed

Léonard, A., Vandevenne, P., Salmon, T., Marchot, P., & Crine, M. (September 2004). Wastewater sludge convective drying: Influence of sludge origin. Environmental Technology, 25 (9), 1051-1057. doi:10.1080/09593330.2004.9619398
Peer Reviewed verified by ORBi

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Electrical tomography investigation in bubble columns [Paper presentation]. Seminar on Tomography, Bangi, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Crine, M., & Marchot, P. (August 2004). Computed Tomography at the University of Liège – Chemical Engineering Laboratory [Paper presentation]. Seminar on Tomography, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Computed X-ray tomography investigations in packed beds [Paper presentation]. Seminar on Tomography, Bangi, Kajang, Malaysia.

Toye, D., Fransolet, E., Léonard, A., Marchot, P., & Crine, M. (August 2004). Image reconstruction in X-ray tomography [Paper presentation]. Seminar on Tomography, Bangi, Kajang, Malaysia.

Blacher, S., Léonard, A., Heinrichs, B., Tcherkassova, N., Ferauche, F., Crine, M., Marchot, P., Loukine, E., & Pirard, J.-P. (14 July 2004). Image analysis of X-ray microtomograms of Pd-Ag/SiO2 xerogel catalysts supported on Al2O3 foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 241 (1-mars Sp. Iss. SI), 201-206. doi:10.1016/j.colsurfa.2004.04.006
Peer Reviewed verified by ORBi

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (March 2004). Comparison of drying behaviours and rheological properties of two mechanically dewatered residual sludges [Paper presentation]. Meeting of the EFCE Working Party on Drying, Nuremberg, Germany.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2004). Measurement of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Drying Technology, 22 (7), 1695-1708. doi:10.1081/DRT-200025629
Peer Reviewed verified by ORBi

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2004). Visualisation de l'écoulement d'un fluide Non-Newtonien en cuve agitée par Vélocimétrie par Images de Particules : influence du temps de mélange [Poster presentation]. 9ème Congrès Francophone de Vélocimétrie Laser, 14-17 Septembre 2004, Bruxelles, Belgium.

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2004). Flow Pattern Evolution With Time Mixing Of Non-Newtonian Fluid In A Stirred Tank Using Particle Image Velocimetry. In American Society of Mechanical Engineering (ASME) (Ed.), Proccedings of 7th Biennal ASME Conference, Engineering Systems Design and Analysis – ESDA 2004, Manchester, United Kingdom,19 – 22 July 2004.
Peer reviewed

Gommes, C., Blacher, S., Bossuot, C., Marchot, P., Nagy, J. B., & Pirard, J.-P. (2004). Influence of the operating conditions on the production rate of multi-walled carbon nanotubes in a CVD reactor. Carbon, 42 (8-9), 1473-1482. doi:10.1016/j.carbon.2004.01.063
Peer Reviewed verified by ORBi

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2004). Flow visualisation of non-Newtonian fluids in a stirred tank using Particle Image Velocimetry : evolution with time [Paper presentation]. 5th international symposium on mixing in industrial processes- ISMIP 5, 1-4 June 2004, Seville, Spain.

Fransolet, E., Marchot, P., Toye, D., & Crine, M. (2004). Flow pattern evolution with time mixing of non-newtionian fluid in a stirred tank using particle image velocimetry. In ESDA, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004. Manchester, United Kingdom: ESDA.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (November 2003). Image analysis of X-ray microtomograms of soft materials during convective drying. Journal of Microscopy, 212 (Pt 2), 197-204. doi:10.1046/j.1365-2818.2003.01242.x
Peer Reviewed verified by ORBi

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (October 2003). 3D image analysis characterization of wastewater sludge extrudates submitted to convective drying [Paper presentation]. First International Meeting on Applied Physics - Aphys2003, Badajoz, Spain.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Use of X-ray microtomography to determine internal moisture profiles during convective drying of deformable materials. In G. Saravacos, Z. B. Maroulis, M. Krokida, ... V. T. Karathanos (Eds.), Proceedings of the European Drying Symposium - EuDrying03 (pp. 31-39).
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Convective drying of wastewater sludges: Influence of air temperature, superficial velocity and humidity on the kinetics. In Z. Pakowski (Ed.), X Drying Symposium, Lodz, 17-19 September 2003. Lodz, Poland: Politechnika Lodzla.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Moisture profiles determination during convective drying using X-ray microtomography. In Proceedings of the 3rd World Congress on Industrial Process Tomography, Banff, Canada (pp. 730-735). International Society for Industrial Process Tomography.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (September 2003). Application of X-ray microtomography to follow cracks development during convective drying of deformable materials [Poster presentation]. 4th European Congress of Chemical Engineering - ECCE4, Grenade, Spain.

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (September 2003). Non destructive measurement of shrinkage, cracks and moisture profiles by X-ray microtomography : application to wastewater sludge convective drying [Paper presentation]. Séminaire donné à l'Institute of Agrophysics, Polish Academy of Sciences, Lublin, Poland.

Blacher, S., Léonard, A., Tcherkassova, N., Ferauche, F., Heinrichs, B., Crine, M., Marchot, P., & Pirard, J.-P. (2003). Image analysis of X-ray microtomograms of Pd-Ag/SiO2 xerogel catalysts supported on Al2O3 foams [Poster presentation]. Third International Workshop on Characterization of Porous Materials: from Angstroms to Millimeters, Princeton, New Jersey, United States.

Fransolet, E., Coumont, V., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2003). Rétention gazeuse dans une colonne à bulles contenant un liquide visqueux non-newtonien. Tribune de l'Eau, 56 (622), 15-20.
Peer reviewed

Marchot, P., Fransolet, E., L'Homme, G., Simon, D., Toye, D., & Crine, M. (2003). Détermination du régime hydrodynamique dans une colonne à bulles par tomographie électrique résistive. In J. Legrand (Ed.), Récents Progrès en Génie des procédés - N°90 - Du rayonnement scientifique à la diffusion des technologies - Actes du 9ème Congrès de la Société Française de Génie des Procédés, 9-11 septembre 2003, Saint-Nazaire, France. Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Toye, D., L’Homme, G., Crine, M., & Marchot, P. (2003). Perspective in data fusion between X-ray computed tomography and electrical capacitance tomography in an absorption column. In 3rd World Congress on Industrial Process Tomography (pp. 68-73). International Society for Industrial Process Tomography.
Peer reviewed

Léonard, A., Blacher, S., Pirard, R., Marchot, P., Pirard, J.-P., & Crine, M. (2003). Multiscale texture characterization of wastewater sludges dried in a convective rig. Drying Technology, 21 (8), 1507-1526. doi:10.1081/DRT-120024490
Peer Reviewed verified by ORBi

Toye, D., L'Homme, G., Crine, M., & Marchot, P. (2003). Liquid distribution in a packed column : comparison between images obtained by X-ray computed tomography and by electrical capacitance tomography [Paper presentation]. 4th European Congress of Chemical Engineering – ECCE4, 21-25 septembre 2003, Granada, Spain.

Toye, D., L'Homme, G., Crine, M., & Marchot, P. (2003). Data fusion between X-ray computed tomography and electrical capacitance tomography images obtained on an absorption columns [Paper presentation]. 6th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering - GLS6, 17-20 août 2003, Vancouver, Canada.

Toye, D., Scheen, P., Crine, M., L'Homme, G., & Marchot, P. (2003). Distribution de la rétention dynamique de liquide dans une colonne à empilage : comparaison des résultats obtenus par tomographie à rayons X et par tomographie électrique capacitive. Tribune de l'Eau, 56, 21-26.
Peer reviewed

Toye, D., L'Homme, G., Crine, M., & Marchot, P. (2003). Perspectives in data fusion between x-ray computed tomography and electrical capacitance tomography in an absorption column. In T. Dyakowski, A. Kantzas, ... P. Ronson (Eds.), Proceedings of 3rd World Congress on Industrial Process Tomography, Banff, Canada, 2-5 septembre 2003 (pp. 68-73). Manchester, United Kingdom: Virtual Centre for Industrial Process Tomography.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., Pirard, J.-P., & Crine, M. (August 2002). 3D imaging of the texture evolution during convective drying of soft shrinkable materials [Poster presentation]. CHISA 2002, 15th International Congress of Chemical and Process Engineering, Prague, Czechia.

Fransolet, E., Crine, M., L'Homme, G., Toye, D., & Marchot, P. (August 2002). Electrical resistance tomography sensor simulations: comparison with experiments. Measurement Science and Technology, 13 (8), 1239-1247. doi:10.1088/0957-0233/13/8/311
Peer Reviewed verified by ORBi

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2002). Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. Drying Technology, 20 (4-5), 1053-1069. doi:10.1081/DRT-120004013
Peer Reviewed verified by ORBi

Fransolet, E., Coumont, V., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2002). Rétention gazeuse dans une colonne à bulles contenant un liquide visqueux non-newtonien [Poster presentation]. 4èmes Journées Francophones sur les Réacteurs Gaz-Liquide et Gaz-Liquide-Solide, 08-11 octobre 2002, Herbeumont-sur-Semois, Belgium.

Toye, D., Scheen, P., Crine, M., L'Homme, G., & Marchot, P. (2002). Distribution de la rétention dynamique de liquide dans une colonne à empilage : comparaison des résultats obtenus par tomographie à rayons X et par tomographie électrique capacitive [Poster presentation]. 4èmes Journées Francophones sur les Réacteurs Gaz-Liquide et Gaz-Liquide-Solide, 08-11 octobre 2002, Herbeumont-sur-Semois, Belgium.

Marchot, P., Fransolet, E., Crine, M., L'Homme, G., & Toye, D. (2002). Gas-liquid-solid bubble column investigation by electrical resistance tomography [Paper presentation]. 17th International Symposium on Chemical Reaction Engineering - ISCRE17, 25-28 août 2002, Hong Kong, China.

Fransolet, E., Toye, D., Crine, M., L'Homme, G., & Marchot, P. (2002). Comparison between temporal pressure and ERT signals in a bubble column [Paper presentation]. 15th International Congress of Chemical and Process Engineering –CHISA 2002", 25- 29 août 2002, Prague, Czechia.

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). Suivi du procédé de séchage thermique de boues d'épuration par microtomographie aux rayons X. In A. Latifi, J. Boudrant, ... J. Tonde (Eds.), Récents progrès en génie des procédés N°82 Vol.15 2001 : information, modélisation, simulation et optimisation (pp. 465-472). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. In Proceedings of the 6th World Congress of Chemical Engineering.
Peer reviewed

Léonard, A., Blacher, S., Marchot, P., & Crine, M. (2001). X-ray microtomography : a new tool to follow soft material shrinkage during convective drying. In Proceedings of the 2nd World Congress on Industrial Process Tomography, Hannover, Germany, Aug 29-31, 2001 (pp. 110-117).
Peer reviewed

Fransolet, E., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2001). Bubble-columns : local gas holdup determination by electrical resistance tomography. Chemie Ingenieur Technik, 73, 754.
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (2001). Liquid holdup distribution in a corrugated sheet structured packing measured by X-ray tomography. Chemie Ingenieur Technik, 73, 739.
Peer Reviewed verified by ORBi

Marchot, P., Toye, D., Pelsser, A. M., Crine, M., L'Homme, G., & Olujic, Z. (2001). Liquid distribution images on structured packing by X-ray computed tomography. AIChE Journal, 47 (6), 1471-1476. doi:10.1002/aic.690470622
Peer Reviewed verified by ORBi

Fransolet, E., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2001). Utilisation de la tomographie électrique résistive en vue de la caractérisation du fonctionnement d'une colonne à bulles. In R. Latifi, J. Boudrant, ... D. Tondeur (Eds.), Récents Progrès en Génie des procédés - N°82 - Information, Modélisation, Simulation et Optimisation - Actes du 8ème Congrès de la Société française de Génie des Procédés, 17-19 octobre 2001, Nancy, France (pp. 489-496). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Toye, D., Crine, M., L'Homme, G., Olujic, Z., & Marchot, P. (2001). Analyse de la distribution de la rétention dynamique de liquide dans une colonne gaz-liquide à garnissage par tomographie à rayons X. In R. Latifi, J. Boudrant, ... D. Tondeur (Eds.), Récents Progrès en Génie des procédés - N°82 - Information, Modélisation, Simulation et Optimisation - Actes du 8ème Congrès de la Société française de Génie des Procédés, 17-19 octobre 2001, Nancy, France (pp. 433-440). Lavoisier Technique et Documentation.
Peer reviewed

Fransolet, E., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2001). Imagerie par tomographie électrique résistive de la distribution des phases dans une colonne à bulles. In J. Boudrant, M.-N. Pons, ... H. Vivier (Eds.), Récents Progrès en Génie des procédés - N°78 - Visualisation-Image-Modélisation - Actes du Congrès VIM2001 (Visualisation - Image- Modélisation), 15-17 mai 2001, Nancy, France (pp. 101-107). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Toye, D., Marchot, P., Crine, M., L'Homme, G., & Olujic, Z. (2001). Liquid holdup distribution in a corrugated sheet structured packing measured by X-ray tomography [Paper presentation]. 3rd European Congress on Chemical Engineering – ECCE3, 26-28 juin 2001, Nuremberg, Germany.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (2001). Images tridimensionnelles de la rétention dynamique dans un empilage structuré obtenues par tomographie à rayons X. In Boudrant, M.-N. Pons, ... H. Vivier (Eds.), Récents Progrès en Génie des Procés - N°78 - Visualisation-Image-Modélisation - Actes du Congrès VIM2001 (Visualisation - Image- Modélisation), 15-17 mai 2001, Nancy, France (pp. 75-81). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

Olujic, Z., Marchot, P., Toye, D., Crine, M., & L'Homme, G. (2001). X-ray computed tomography : A key to revealing the secrets of small scale liquid maldistribution in packed beds [Paper presentation]. 2001 AIChE Petrochem Expo – Distillation symposium, 26 Avril 2001, Houston, United States - Texas.

Fransolet, E., Crine, M., L'Homme, G., Marchot, P., & Toye, D. (2001). Bubble columns : local gas holdup determination by electrical resistance tomography [Poster presentation]. 3rd European Congress on Chemical Engineering – ECCE3, 26-28 juin 2001, Nuremberg, Germany.

Fransolet, E., Crine, M., L'Homme, G., Toye, D., & Marchot, P. (2001). Analysis of electrical resistance tomography measurements obtained on a bubble column. Measurement Science and Technology, 12 (8), 1055-1060. doi:10.1088/0957-0233/12/8/310
Peer Reviewed verified by ORBi

Marchot, P., Toye, D., Crine, M., L'Homme, G., Pelsser, A.-M., & Olujic, Z. (2000). Imaging of liquid distributiion within corrugated sheet structured packing beds by X-ray computed tomography. Chemie Ingenieur Technik, 72, 1010.
Peer Reviewed verified by ORBi

Marchot, P., Toye, D., Crine, M., L'Homme, G., & Pelsser, A.-M. (2000). Imaging liquid distribution on Mellapak 250Y structured packing by X-ray tomography [Paper presentation]. DAE Working Party Technical Meeting, 04 mai 2000, Winterthur, Switzerland.

Marchot, P., Toye, D., Crine, M., L'Homme, G., Pelsser, A.-M., & Olujic, Z. (2000). Imaging of liquid distribution within corrugated sheet structured packing beds by X-ray computed tomography [Paper presentation]. VDI – Gesellschaft Verfahrentechnik und Chemieingenieurwesen Jahrestagung 2000, 20-22 Septembre 2000, Karlruhe, Germany.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1999). A compartimentalized model for trickle flow through packed beds based on x-ray tomograms. In G. Flamand (Ed.), Récents Progrès en Génie des procédés - N°69 - Tools fro process understanding and control - Proceedings of the 2nd European Congress on Chemical Engineering – ECCE2, 05 – 07 octobre 1999, Montpellier, France. Paris, France: Lavoisier, Technique et Documentation.
Peer reviewed

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1999). Modelling of the liquid distribution in a trickle flow packed column based upon X-ray tomography images. Chemical Engineering Communications, 175, 131-142. doi:10.1080/00986449908912143
Peer Reviewed verified by ORBi

Marchot, P., Toye, D., Crine, M., Pelsser, A.-M., & L'Homme, G. (1999). Investigation on liquid maldistribution in packed beds by X-ray tomography. Chemical Engineering Research and Design, 77, 511-518. doi:10.1205/026387699526548
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (August 1998). Trickle flow through packed beds : Use of systemic models in the interpretation of X-ray tomograms [Paper presentation]. Second International Symposium on Measuring Techniques for Multiphase Flow, Beijing, China.

Toye, D., Marchot, P., Crine, M., Pelsser, A. M., & L'Homme, G. (1998). Local measurements of void fraction and liquid holdup in packed columns using X-ray computed tomography. Chemical Engineering and Processing: Process Intensification, 37 (6), 511-520. doi:10.1016/S0255-2701(98)00058-0
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (October 1997). Investigating trickle flow in packed columns by X-ray tomography [Paper presentation]. 3rd International Conference and Exhibition on Electronic Measurements & Instruments (ICEMI'97), Beijing, China.

Toye, D., Crine, M., & Marchot, P. (30 September 1997). X-ray tomography in random packings [Paper presentation]. Workshop on Process Tomography, Hanovre, Germany.

Toye, D., Crine, M., Marchot, P., & L'Homme, G. (19 June 1997). Perspectives d'utilisation de la tomographie dans la description du fonctionnement des réacteurs à trois phases [Paper presentation]. Séminaire : "Utilisation de la tomographie à rayons X en Génie des réacteurs chimiques", Solaize, France.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1997). Modeling of the liquid phase distribution in a packed column based on the analysis of X-ray tomography images [Poster presentation]. 1st European Congress on Chemical Engineering (ECCE1), 4-7 mai 1997, Florence, Italy.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1997). Modelling of the liquid distribution in a packed column based upon X-ray tomography images [Paper presentation]. Frontiers in Industrial Process Tomography - II, 9-12 avril 1997, Delft, Netherlands.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1996). Modelling of multiphase flow in packed beds by computer-assisted x-ray tomography. Measurement Science and Technology, 7 (3), 436-443. doi:10.1088/0957-0233/7/3/027
Peer Reviewed verified by ORBi

Crine, M., Toye, D., & Marchot, P. (1996). L'hydrodynamique dans les lits bactériens : le rôle du garnissage [Paper presentation]. Séminaire "Biomasse Fixée", 31 mai 1996, Arlon, Belgium.

Abdullah, J., Aferka, S., Crine, M., Saroha, A., Toye, D., & Marchot, P. (1996). Investigating the liquid distribution in a reactive distillation packing using high energy X-ray tomography [Paper presentation]. 5th ISMTMF/IWPT2-5th International Symposium on Measurement Techniques for Multiphase Flows and 2nd International Workshop on Process Tomography, Macao, China, December 10-13, 2006, Macao, China.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1996). Computer-assisted tomography for liquid imaging in trickle-flow columns. In Non-invasive Monitoring of Multiphase Flows (pp. 107-139). Amsterdam, Netherlands: Elsevier Science Ltd.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1995). Analysis of liquid flow distribution in trickle bed reactor using computer assisted tomography. In M. S. Beck, B. S. Hoyle, M. A. Morris, R. A. Waterfall, ... R. A. Williams (Eds.), Process tomography - 1995 - Implementation for industrial processes (pp. 84-91). Manchester, United Kingdom: UMIST.

Crine, M., Toye, D., & Marchot, P. (1995). Les lits bactériens : de l'application à la recherche [Paper presentation]. Traitement et Réutilisation des Eaux Usées, 16-17 mai 1995, Casablanca, Morocco.

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1995). Analysis of liquid flow distribution in a trickle bed reactor. In Frontiers in Industrial Process Tomography (pp. 275-284). New York, United States: Engineering Foundation.

Pirson, A., MOHSINE, A., Marchot, P., Michaux, B., Van Cantfort, O., Pirard, J.-P., & LECLOUX, A. J. (1995). SYNTHESIS OF SIO2-TIO2 XEROGELS BY SOL-GEL PROCESS. Journal of Sol-Gel Science and Technology, 4 (3), 179-185. doi:10.1007/BF00488372
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1995). Analysis of Liquid Flow Distribution in Trickling Flow Reactor Using Computer-Assisted X-Ray Tomography. Chemical Engineering Research and Design, 73 (A3), 258-262.
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1995). Analysis of liquid flow distribution in trickling flow reactor using computer assisted x-ray tomography. Chemical Engineering Research and Design, 73 (A3), 258 - 262.
Peer Reviewed verified by ORBi

Toye, D., Crine, M., Marchot, P., & L'Homme, G. (1994). The use of large scale computer assisted tomography for the study of hydrodynamics in trickling filters [Poster presentation]. 13th International Symposium on Chemical Reaction Engineering (ISCRE 13), 25-28 août 1994, Baltimore, Maryland, United States.

Lekhlif, B., Toye, D., Marchot, P., & Crine, M. (1994). Interactions between the biofilm growth and the hydrodynamics in an aerobic trickling filter. Water Science and Technology, 29, 423-430. doi:10.2166/wst.1994.0788
Peer Reviewed verified by ORBi

Toye, D., Marchot, P., Crine, M., & L'Homme, G. (1994). The use of large scale computer assisted tomography for the study of hydrodynamics in trickling filters. Chemical Engineering Science, 49 (24B), 5271-5280. doi:10.1016/0009-2509(94)00395-5
Peer Reviewed verified by ORBi

Crine, M., Marchot, P., Toye, D., & L'Homme, G. (1994). Trickle flow in packed columns : new experimental and theoretical investigations. Trends in Chemical Engineering, 2, 319-332.
Peer reviewed

Groslambert, S., Granier, B., Marchot, P., & Crine, M. (1993). Use of neural networks for monitoring a bioreactor [Poster presentation]. First Forum of Young European Researchers, Liège, Belgium.

Ennen, A., Toye, D., Marchot, P., & Crine, M. (1993). The use of differential pressure transducer in the study of flow patterns in a trickle-bed reactor [Poster presentation]. 11th International Congress on Chemical and Process Engineering (CHISA), 29 août - 3 septembre 1993, Prague, Czechia.

Toye, D., Marchot, P., & Crine, M. (1993). Etude de la distribution du liquide dans les colonnes à garnissage par tomographie de rayons X. In C. Jallut & J. Cheron (Eds.), Récents Progrès en Génie des Procédés - N°26 - Visualisation des écoulements, des transferts et des structures - Actes de l'École de Printemps "Visualisation en Génie des Procédés", 25-27 mai 1993, Nancy, France (pp. 181-186). Paris, France: Lavoisier - Technique et Documentation.
Peer reviewed

Marchot, P., Crine, M., & L'Homme, G. (1992). Rational descriptionthe trickle flow through packed beds. Part I : Liquid distribution far form the distributer. Chemical Engineering, 48, 49-59.
Peer Reviewed verified by ORBi

Crine, M., Marchot, P., Lekhlif, B., & L'Homme, G. (1992). Macromixing versus hydrodynamics in trickle-flow columns. Chemical Engineering Science, 47, 2263-2268. doi:10.1016/0009-2509(92)87045-R
Peer Reviewed verified by ORBi

Crine, M., Marchot, P., & L'Homme, G. (1992). Statistical hydrodynamics in trickle flow columns. AIChE Journal, 38, 136-147. doi:10.1002/aic.690380114
Peer Reviewed verified by ORBi

Marchot, P., Crine, M., & L'Homme, G. (1992). Rational description of the trickle flow through packed beds. Part II : Radial spreading of the liquid. Chemical Engineering, 48, 61-70. doi:10.1016/0300-9467(92)85007-V
Peer Reviewed verified by ORBi

Groslambert, S., Granier, B., Marchot, P., & Crine, M. (1991). Use of neural networks for monitoring a bioreactor [Poster presentation]. Fourth Biotechnology Event : Monitoring Biosystems, Tervuren, Belgium.

Crine, M., Marchot, P., Schlitz, M., Lekhlif, B., & L'Homme, G. (1990). Hydrodynamique et distribution de temps de séjour dans les lits bactériens. In Les réacteurs gaz-liquide et gaz-liquide-solide (pp. 65-72). Paris, France: Lavoisier Technique et Documentation.
Peer reviewed

De la Cal, J., Crine, M., Marchot, P., Asua, J. M., & L'Homme, G. (1989). Rôle de la dispersion radiale et du mouillage local sur l'hétérogénéité de l'écoulement de liquide dans un lit bactérien. Tribune de l'Eau, 41, 49-54.
Peer reviewed

Marchot, P. (1989). Description stochastique de l'écoulement ruisselant dans les lits fixes [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/39244

Marchot, P., Crine, M., De la Cal, J. C., & Ausloos, M. (1988). Two phase flow through packed bed : static and dynamic accessibilities of the packing. In Disorder and Mixing (pp. 253-261). Nijhoff Publishers.

Lecloux, A. J., Verleye, P., Bronckart, J., Noville, F., Marchot, P., & Pirard, J.-P. (1988). Texture and sintering of zirconium dioxide-yttrium oxide ceramics. Reactivity of Solids, 4, 309-325. doi:10.1016/0168-7336(88)80002-0
Peer reviewed

Crine, M., & Marchot, P. (1988). Stochastic modeling of the gas-liquid trickling flow through a packed bed. Chemical and Biochemical Engineering, 2, 101-104.
Peer reviewed

Marchot, P., Crine, M., & L'Homme, G. (1987). Two phase flow through a packed bed : a stochastic model based on the percolation concepts. Chemical Engineering Journal, 36, 141-150. doi:10.1016/0300-9467(87)80020-5
Peer Reviewed verified by ORBi

Dodet, C., Noville, F., Crine, M., Marchot, P., Germain, A., & Pirard, J.-P. (1987). Oceanic polymetallic nodules : a catalyst for hydrotreatment of petroleum residua. Acta Chimica Hungarica, 124, 65-72.
Peer reviewed

Dodet, C., Noville, F., Crine, M., Marchot, P., Germain, A., & Pirard, J.-P. (1987). OCEANIC POLYMETALLIC NODULES - A CATALYST FOR HYDROTREATMENT OF PETROLEUM RESIDUES. Acta Chimica Hungarica, 124 (1), 65-72.
Peer reviewed

Dodet, C., Noville, F., Crine, M., Marchot, P., Germain, A., & Pirard, J.-P. (1986). Study of the texture of monodisperse silica sphere samples in the nano size range. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 19, 359-374.
Peer Reviewed verified by ORBi

Dodet, C., Noville, F., Crine, M., Marchot, P., & Pirard, J.-P. (1985). Hydrotreatment of petroleum atmospheric residua using oceanic polymetallic nodules in trickle bed reactor. Bulletin des Sociétés Chimiques Belges, 94, 1-5.
Peer reviewed

Dodet, C., Noville, F., Crine, M., Marchot, P., & Pirard, J.-P. (1984). Hydrodemetalation and hydrodesulfurization of petroleum residua using manganese nodules in trickle bed reactor. Applied Catalysis, 11, 251-258.
Peer reviewed

Dodet, C., Noville, F., Crine, M., Marchot, P., & Pirard, J.-P. (1984). Texture of manganese nodules used as a catalyst for demetalizing and desulfurizing petroleum residua. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 11, 187-197.
Peer Reviewed verified by ORBi

Crine, M., & Marchot, P. (October 1983). Cocurrent downward gas-liquid flow in granular packed beds. Part I Description of liquid flow structures. International Chemical Engineering, 23 (4), 663 - 671.
Peer reviewed

Crine, M., & Marchot, P. (1983). Cocurrent downward gas-liquid flow in packed beds. Part 2 : Stochastic model of liquid flow. International Chemical Engineering, 23, 663-671.
Peer reviewed

Crine, M., Asua, J. M., Marchot, P., & L'Homme, G. (1983). Teoria sobre la dispersion de la fase liquida en el flujo escurrido a traves de columnas de relleno. Latin American Journal of Chemical Engineering and Applied Chemistry, 13, 1-20.
Peer reviewed

Crine, M., & Marchot, P. (1981). Les écoulements gaz-liquide à co-courant vers le bas en lit granulaire fixe. 2ème partie : Modèle stochastique de l'écoulement du liquide. Entropie, 102, 37-43.
Peer reviewed

Crine, M., & Marchot, P. (1981). Measuring dynamic liquid holdup in trickle-bed reactors under actual operating conditions. Chemical Engineering Communications, 8, 365-371. doi:10.1080/00986448108912592
Peer Reviewed verified by ORBi

Crine, M., Marchot, P., & L'Homme, G. (1981). A phenomenological description of trickle-bed reactors : application to the hydrotreating of petroleum fractions. Chemical Engineering Communications, 35, 51-57.
Peer Reviewed verified by ORBi

Crine, M., & Marchot, P. (1981). Les écoulements gaz-liquide à co-courant vers le bas en lit granulaire fixe. 1ère partie : Description des structures d'écoulement du liquide. Entropie, 102, 28-36.
Peer reviewed

Crine, M., Asua, J. M., Marchot, P., & L'Homme, G. (1981). Dispersion of the liquid trickle flow thhrough packed-beds [Paper presentation]. 7th International Conress of Chemical Engineering, Chemical Design and Automation CHISA 81, Prague, CSK.

Crine, M., Marchot, P., & L'Homme, G. (1980). Liquid flow maldistribution in trickle-bed reactors. Chemical Engineering Communications, 7, 377-388.
Peer Reviewed verified by ORBi

Germain, A., Crine, M., & Marchot, P. (1979). Experimental determination of physical and chemical kinetic parameters in three phase catalytic systems. In Chemical Engineering of Gas-Liquid-Solid Reactions (pp. 7, pp. 187-217). Liège, Belgium: Cebedoc.

Crine, M., Marchot, P., & L'Homme, G. (1979). Mathematical modelling of the liquid trickling flow through a packed bed using the percolation theory. Computers and Chemical Engineering, 3, 515-518. doi:10.1016/0098-1354(79)80086-1
Peer Reviewed verified by ORBi

Crine, M., & Marchot, P. (1979). The modelling of catalytic trickle-bed reactors. In Chemical Engineering of Gas-Liquid-Solid Reactions (pp. 5, pp. 134-171). Liège, Belgium: Cebedoc.

Germain, A., Crine, M., Marchot, P., & L'Homme, G. (1978). Modelling of a trickle-bed reactor : the hydrogenation of 2-butanone on a ruthenium catalyst. In Chemical Engineering Houston (pp. 411-424).
Peer reviewed

Contact ORBi