J. I. ADACHI, E. DETOURNAY, AND A. DRESCHER, Determination of rock strength parameters from cutting tests, in Proceedings of the 2nd North American Rock Mechanics Symposium (NARMS 1996), Rotterdam, 1996, Balkema, Leiden, The Netherlands, 1996, pp. 1517-1523.
R. ALMENARA AND E. DETOURNAY, Cutting experiments in sandstones with blunt PDC cutters, in Proceedings of the International Society of Rock Mechanics Symposium EuRock '92, Thomas Telford, London, 1992, pp. 215-220.
J. F. BRETT, The genesis of torsional drillstring vibrations, SPE Drill. Eng., September (1992), pp. 168-174.
N. CHALLAMEL, Rock destruction effect on the stability of a drilling structure, J. Sound Vibration, 233 (2000), pp. 235-254.
C. CANUDAS DE Wit, H. OLSON, K. J. ASTROM, AND P. LISCHINSKY, A new model for control of systems with friction, IEEE Trans. Automat. Control, 40 (1995), pp. 419-425.
E. DETOURNAY and P. DEFOURNY, A phenomenological model of the drilling action of drag bits, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 29 (1992), pp. 13-23.
R. P. H. FAASSEN, N. VAN DE WOUW, J. A. J. OOSTERLING, AND H. NIJMEIJER, Prediction of regenerative chatter by modeling and analysis of high-speed milling, Internat. J. Machine Tool and Manufacture, 43 (2003), pp. 1437-1445.
A. F. FILIPPOV, Differential equations with discontinuous right-hand side, Amer. Math. Soc. Transl., 42 (1964), pp. 199-231.
C. GERMAY, Self-Excited Vibrations of Drag Bits, Master's thesis, University of Minnesota, 2002.
T. INSPERGER, G. STEPAN, AND J. TURI, State dependent delay model for regenerative cutting processes, in Proceedings of the Fifth EUROMECH Nonlinear Dynamics Conference (ENOC 2005), Eindhoven, The Netherlands, 2005, pp. 1124-1129.
J. JANSEN, L. VAN DEN STEEN, AND E. ZACHARIASEN, Active damping of torsional drillstring vibrations with a hydraulic top drive, SPE Drilling Completion, 10 (1995), pp. 250-254.
R. I. LEINE, D. H. VAN CAMPEN, and W. J. G. KEULTJES, Stick-slip whirl interaction in drillstring dynamics, J. Vibration Acoustics, 124 (2002), pp. 209-220.
N. MIHAJLOVIC, A. A. VAN VEGGEL, N. VAN DE WOUW, AND H. Nijmeijer, Analysis of friction induced limit cycling in an experimental drill-string system, J. Dynam. Systems Measurement and Control, 126 (2004), pp. 709-720.
E. M. NAVARRO-Lopez AND R. SUAREZ-Cortez, Practical approach to modelling and controlling stickslip oscillations in oilwell drillstrings, in Proceedings of the IEEE International Conference on Control Applications, 2004, IEEE Press, Piscataway, NJ, pp. 1454-1460.
T. S. PARKER AND L. O. CHUA, Practical Numerical Algorithms for Chaotic Systems, Springer-Verlag, New York, 1989.
D. R. PAVONE AND J. P. DESPLANS, Application of high sampling rate downhole measurements for analysis and cure of stick-slip in drilling, in Proceedings of the SPE Annual Technical Conference and Exhibition, 1994, SPE 28324, pp. 335-345.
T. RICHARD, C. GERMAY, AND E. DETOURNAY, Self-excited stick-slip oscillations of drill bits, C. R. Mécanique, 332 (2004), pp. 619-626.
T. RICHARD, C. GERMAY, AND E. DETOURNAY, Self-excited vibrations of drilling systems with drag bits, J. Sound Vibration, 305 (2007), pp. 432-456.
A. F. A. SERRARENS, M. J. G. VAN DE MOLENGRAFT, J. J. KOK, AND L. VAN DEN STEEN, H1 control for suppressing stick-slip in oil well drillstrings, IEEE Control Systems Mag., 18 (1998), pp. 19-30.
G. STEPAN, Delay-differential equation models for machine tool chatter, in Dynamics and Chaos in Manufacturing Processes, F. C. Moon, ed., Wiley, New York, 1998, pp. 165-191.
A. R. TEEL, L. MOREAU, AND D. NESIC, A unified framework for input-to-state stability in systems with two time scales, IEEE Trans. Automat. Control, 48 (2003), pp. 1526-1544.
J. TLUSTY AND M. POLACEK, The stability of machine tool against self-excited-vibrations in machining, in Proceedings of the ASME Production Engineering Research Conference, American Society of Mechanical Engineers, New York, 1963, pp. 465-474.