Implementation of a damage evolution law for dual-phase steels in Gurson-type models

[en] This paper is a contribution to the phenomenological modeling of damage evolution in DP steels in the framework of Gurson’s approach. It is based on recent results of X-ray tomography in-situ tensile tests and subsequent one-dimensional metallurgical void nucleation models proposed in [C. Landron et al., Scripta Materialia 63 (2010) 973—976]. A macroscopic void nucleation law for DP steels is proposed, covering a wide range of stress triaxialities. The respective effects of nucleation, growth and coalescence are clearly separated. Validations with respect to experimental porosity measurements were performed for several monotonic loading cases and for two loading sequences involving large strains and strain-path changes.

Disciplines :

Materials science & engineering

Author, co-author :

Balan, Tudor

Lemoine, Xavier

Maire, eric

Habraken, Anne ; Université de Liège > Département ArGEnCo > Département ArGEnCo

Language :

English

Title :

Implementation of a damage evolution law for dual-phase steels in Gurson-type models

Publication date :

September 2015

Journal title :

Materials and Design

ISSN :

0264-1275

eISSN :

1873-4197

Publisher :

Elsevier, Amsterdam, Netherlands

Issue :

Pages :

1213-1222

Peer reviewed :

Peer Reviewed verified by ORBi

Available on ORBi :

since 06 October 2015

Statistics

Number of views

81 (9 by ULiège)

Number of downloads

246 (3 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Abbassi F., Belhadj T., Mistou S., Zghal A. Parameter identification of a mechanical ductile damage using Artificial Neural Networks in sheet metal forming. Mater. Des. 2013, 45:605-615.
N. H. Abid, R. K. Abu Al-Rub, A. N. Palazotto, Computational modeling of the effect of equiaxed heterogeneous microstructures on strength and ductility of dual phase steels, Comput. Mater. Sci. 103 (2015) 20-37.
Achouri M., Germain G., Dal Santo P., Saidane D. Experimental characterization and numerical modeling of micromechanical damage under different stress states. Mater. Des. 2013, 50:207-222.
M. Ben Bettaieb, X. Lemoine, O. Bouaziz, A-M. Habraken, L. Duchêne, Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements, Mech. Mater. 43 (2011) 139-156.
M. Ben Bettaieb, X. Lemoine, L. Duchêne, A-M. Habraken, On the numerical integration of an advanced Gurson model, Int. J. Numer. Methods Eng. 85 (2012) 1049-1072.
Cao T.-S., Maire E., Verdu C., Bobadilla C., Lasne P., Montmitonnet P., Bouchard P.-O. Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model. Comput. Mater. Sci. 2014, 84:175-187.
Cazacu O., Revil-Baudard B., Lebensohn R.A., Garajeu M. New analytic criterion describing the combined effect of pressure and third invariant on yielding of porous solids with von Mises matrix. J. Appl. Mech. 2013, 80:064501.
Chu C.C., Needleman A. Void nucleation effects in biaxially stretched sheets. J. Eng. Mater. Technol. 1980, 102:249-256.
Fansi J., Balan T., Lemoine X., Maire E., Landron C., Bouaziz O., BenBettaieb M., Habraken A.M. Numerical investigation and experimental validation of physically based advanced GTN model for DP steels. Mater. Sci. Eng. A 2013, 569:1-12.
Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth, part 1 - yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol. 1977, 99:2-15.
Haddadi H., Belhabib S. Improving the characterization of a hardening law using digital image correlation over an enhanced heterogeneous tensile test. Int. J. Mech. Sci. 2012, 62:47-56.
Hassannejadasl A., Green D.E., Altenhof W.J., Maris C., Mason M. Numerical modeling of multi-stage tube hydropiercing. Mater. Des. 2013, 46:235-246.
He M., Li F., Wang Z. Forming limit stress diagram prediction of aluminum alloy 5052 based on GTN model parameters determined by in situ tensile test. Chin. J. Aeronaut. 2011, 24:378-386.
Helbert A.L., Feaugas X., Clavel M. Effect of microstructural parameters and backstress on damage mechanisms in alpha/beta titanium alloys. Acta Metall. 1998, 46:939-951.
Kadkhodapour J., Butz A., Ziaei Rad S. Mechanisms of void formation during tensile testing in a commercial dual-phase steel. Acta Mater. 2011, 59:2575-2588.
Kami A., Dariani B.M., Vanini A.S., Comsa D.S., Banabic D. Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model. J. Mater. Process. Technol. 2015, 216:472-483.
Landron C. Ductile damage characterization in dual-phase steels using X-ray tomography 2011, (PhD Thesis), INSA Lyon, France.
Landron C., Bouaziz O., Maire E., Adrien J. Characterization and modeling of void nucleation by interface decohesion in dual phase steels. Scr. Mater. 2010, 63:973-976.
Landron C., Maire E., Bouaziz O., et al. Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels. Acta Mater. 2011, 59:7564-7573.
Landron C., Bouaziz O., Maire E., Adrien J. Experimental investigation of void coalescence in a dual phase steel using X-ray tomography. Acta Mater. 2013, 61:6821-6829.
Mahnken R. Aspects on the finite-element implementation of the Gurson model including parameter identification. Int. J. Plast. 1999, 15:1111-1137.
Maire E., Bouaziz O., Di Michiel M., Verdu C. Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Mater. 2008, 56:4954-4964.
Malcher L., Andrade Pires F.M., César de Sá J.M.A. An extended GTN model for ductile fracture under high and low stress triaxiality. Int. J. Plast. 2014, 54:193-228.
Mansouri L.Z., Chalal H., Abed-Meraim F. Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis. Mech. Mater. 2014, 76:64-92.
Matsuno T., Teodosiu C., Maeda D., Uenishi A. Mesoscale simulation of the early evolution of ductile fracture in dual-phase steels. Int. J. Plast. 2015, 74:17-34.
Nahshon K., Hutchinson J. Modification of the Gurson model for shear failure. European Journal of Mechanics A/Solids 2008, 27:1-17.
Niazi M.S., Meinders V.T., Wisselink H.H., ten Horn C.H.L.J., Klaseboer G., van den Boogaard A.H. A plasticity induced anisotropic damage model for sheet forming processes. Key Eng. Mater. 2013, 554-557:1245-1251.
Nielsen K., Tvergaard V. Ductile shear failure or plug failure of spot welds modeled by modified Gurson model. Eng. Fract. Mech. 2010, 77:1031-1047.
Requena G., Maire E., Leguen C., Thuillier S. Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography. Mater. Sci. Eng. A 2014, 589:242-251.
Revil-Baudard B., Cazacu O., Thuillier S., Maire E. Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data. Mech. Res. Commun. 2013, 50:77-82.
Rice J.R., Tracey D.M. On the ductile enlargement of voids in triaxial stress fields. Journal of the Mechanics and Physics of Solids 1969, 17:201-217.
Saeidi N., Ashrafizadeh F., Niroumand B., Forouzan M.R., Barlat F. Damage mechanism and modeling of void nucleation process in a ferrite-martensite dual phase steel. Eng. Fract. Mech. 2014, 127:97-103.
Schmitt J.H., Shen E.L., Raphanel J.L. A parameter for measuring the magnitude of a change of strain path: validation and comparison with experiments on low carbon steel. Int. J. Plast. 1994, 10:535-551.
Shinohara Y., Besson J., Madi Y. Anisotropic damage behavior in high-strength line pipe steels. International Journal of Offshore and Polar Engineering 2012, 22:83-89.
Sirinakorn T., Wongwises S., Uthaisangsuk V. A study of local deformation and damage of dual phase steel. Mater. Des. 2014, 64:729-742.
Springmann M., Kuna M. Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental and numerical techniques. Comput. Mater. Sci. 2005, 32:544-552.
Sun X., Choi K.S., Liu W.N., Khaleel M.A. Predicting failure modes and ductility of dual phase steels using plastic strain localization. Int. J. Plast. 2009, 25:1888-1909.
Thuillier S., Maire E., Brunet M. Ductile damage in aluminum alloy thin sheets: correlation between micro-tomography observations and mechanical modeling. Mater. Sci. Eng. A 2012, 558:217-225.
Troufflard J., Requena G., Thuillier S., Maire E. Ductile damage in tension and bending for DP980 steel sheets. Key Eng. Mater. 2013, 554-557:110-117.
Tvergaard V., Needleman A. Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 1984, 32:157-169.
Uthaisangsuk V., Prahl U., Bleck W. Modeling of damage and failure in multiphase high strength DP and TRIP steels. Eng. Fract. Mech. 2011, 78:469-486.
Xue L. Constitutive modeling of void shearing effect in ductile fracture of porous materials. Eng. Fract. Mech. 2008, 75:3343-3366.