Airey, P., and Verran, J. (2007). Potential use of copper as a hygienic surface; problems associated with cumulative soiling and cleaning. J. Hosp. Infect. 67:271-277.
Anastasiadis, S. H., Retsos, H., Pispas, S., Hadjichristidis, N., and Neophytides, S. (2003). Smart polymer surfaces. Macromolecules. 36:1994-1999.
Auer, F., Harenburg, J., and Roth, C. (2001). Functional layers on metals: Tailored properties by sol-gel technology. Materialwiss. Werkstofftech. 32:767-773.
Augustin, W., Zhang, J., Bialuch, L, Geddert, T., and Scholl, S. (2006). Modifiezierte Oberfl̈achenbeschichtugen zur Foulingminderung auf ẅarmeiibertragenden Flachen. Chem. Ing. Tech. 78:607-612.
Azeredo, J., Visser, J., and Oliveira, R. (1999). Exopolymers in bacterial adhesion: Interpretation in terms of DLVO and XDLVO theories. Colloid Surf. B-Biointerfaces. 14:141-148.
Bachmann, R. T., and Edyvean, R. G. J. (2006). AFM study of the colonization of stainless steel by Aquabacterium commune. Int. Biodeterior. Biodegrad. (2006). 58:112-118.
Bansal, B., Chen, X. D., and Müller-Steinhagen, H. (2003). Use of noncrystallising particles to mitigate crystallisation fouling. Int. Comm. Heat Mass Transf. 30:695-706.
Barthlott, W., and Neinhuis, C. (1997). Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta. 202:1-8.
Bayoudh, S., Ponsonnet, L., Ben Ouada, H., Bakhrouf, A., and Othmane, A. (2005). Bacterial detachment from hydrophilic and hydrophobic surfaces using a microjet impingement. Colloid Surf. A-Physicochem. Eng. Asp. 266:160-167.
Beech, I.B. (2004).Corrosion of technical materials in the presence of biofilms - current understanding and state-of-the art methods of study. Int. Biodeterior. Biodegrad. 53:177-183.
Bellon-Fontaine, M.-N., Rault, J., and van Oss, C. J. (1996). Microbial adhesion to solvents: A novel method to determine the electron-donor/electron acceptor or Lewis acid-base properties of microbial cells. Colloid Surf. BBiointerfaces. 7:47-53.
Belmar-Beiny, M. T., and Fryer, P. (1993). Preliminary stages of fouling from whey protein solutions. J. Dairy Res. 60:467-483.
Belmar-Beiny, M. T., Gotham, S. M., Paterson, W. R., and Fryer, P. J. (1993). The effect of reynolds number and fluid temperature in whey protein fouling. J. Food Eng. 19:119-139.
Beresford, M. R., Andrew, P.W., and Shama, G. (2001). Listeria monocytogenes adheres to many materials found in food-processing environments. J. Appl. Microbiol. 90:1000-1005.
Bhushan, B., and Jung, Y. C. (2007). Wetting study of patterned surfaces for superhydrophobicity. Ultramicroscopy. 107:1033-1041.
Bird, M. R., and Fryer, P. J. (1991). An experimental study of the cleaning of surfaces fouled by whey proteins. Trans IChemE. 69:13-21.
Bobe, U., and Wildbrett, G. (2006). Anforderungen an Werkstoffe und Werkstoffoberflachen bezuglich Reinigbarkeit und Bestandigkeit.Chem. Ing. Tech. 78:1615-1622.
Bobe, U., Hofmann, J., Sommer, K., Beck, U., and Reiners, G. (2007). Adhesion - where cleaning starts. Trends Food Sci. Technol. 18:S36-S39.
Boonaert, C. (2000). Lactic acid bacteria: From surface properties to a nanoscale approach of adhesion, PhDDiss. Université Catholique de Louvain, Belgium.
Boonaert, C. J. P., and Rouxhet, P. O. (1998). Influence of cell growth phase and support surface preconditioning on adhesion of Lactococcus lactis. Med. Fac. Landbouww. Univ. Gent. 63:1147-1154.
Boonaert, C. J. P., Dufréne, Y., and Rouxhet, P. G. (2002). Adhesion (primary) of microorganisms onto surfaces. In: Encyclopedia Environmental Microbiology. Bitton G., Ed. pp 113-132. John Wiley, NY.
Bos, R., van der Mei, H. C., and Busscher, H. J. (1999). Physico-chemistry of initial microbial adhesive interactions its mechanisms and methods for study. Ferns Microbiol. Rev. 23:179-230.
Bossart, O., and Calzaferri, G. (2007). Self assembly of zeolite L crystals on biological self-cleaning surfaces. Microporous Mesoporous Mat. 109:392-397.
Boulangé-Petermann, L., Baroux, B., and Bellon-Fontaine, M.-N. (1993) The influence of metallic surface wettability on bacterial adhesion. In:Contact Angle, Wettability and Adhesion. pp. 839-848. Mittal, K. S., Ed., VSP, Philadelphia.
Boulangé-Petermann, L., Debacq, C., Poiret, P., and Cromieres, B. (2003) Effect of the physical chemistry of polymeric coating surfaces on fouling and cleanability with particular reference to the food industry. In: Contact Angle, Wettability and Adhesion. 3rd Ed., pp. 501-519. Mittal, K. L., Ed. VPS, Philadelphia.
Boulangé-Petermann, L., Gabet, C., and Baroux, B. (2006). On the respective effect of the surface energy and micro-geometry in cleaning ability of bare and coated steels. Colloid Surf. A-Physicochem. Eng. Asp. 272: 56-62.
Boulangé-Petermann, L., Jullien, C., Dubois, P. E., Bénézech, T., and Faille, C. (2004). Influence of surface chemistry on the hygienic status of industrial stainless steel. Biofouling. 20:25-33.
Boulangé-Petermann, L. (1996). Processes of Bioadhesion on stainless steel surfaces and cleanability:Areviewwith special reference to the food industry. Biofouling. 10:275-300.
Boulangé-Petermann, L., Robine, E., Ritoux, S., and Cromieres, B. (2004). Hygienic assessment of polymeric coatings by physico-chemical and microbiological approaches. J. Adhes. Sci. Technol. 18:213-225.
Boyd, R. D., Cole, D., Rowe, D., Verran, J., Coultas, S. J., Paul, A. J., West, R. H., and Goddard, D. T. (2000). Surface characterization of glass and poly(methyl methacrylate) soiled with a mixture of fat, oil, and starch. J. Adhes. Sci. Technol. 14:1195-1207.
Boyd, R. D., Cole, D., Rowe, D., Verran, J., Paul, A. J., and West, R. H. (2001). Cleanability of soiled stainless steel as studied by atomic force microscopy and time of flight secondary ionmass spectrometry. J.Food Prot. 64: 87-93.
Boyd, R. D., Verran, J., Hall, K. E., Underbill, C., Hibbert, S., and West, R. (2001). The cleanability of stainless steel as determined by X-ray photoelectron spectroscopy. Appl. Surf. Sci. 172:135-143.
Bozzi, A., Yuranova, T., Guasaquillo, I., Laub, D., and Kiwi, J. (2005). Selfcleaning of modified cotton textiles by TiO2 at low temperaturesunder daylight irradiation. J. Photochem. Photobiol A-Chem. 174:156-164.
Britten, M., Green, M. L., Boulet, M., and Paquin, P. (1988). Deposit formation on heated surfaces: Effect of interface energetics. J. Dairy Res. 55:551-562.
Cai, R., Van, G. M., Aw, P. K., and Itoh, K. (2006). Solar-driven self-cleaning coating for a painted surface. C.R. Chimie. 9:829-835.
Caillou, S., Gerin, P. A., Nonckreman, C. J., Fleith, S., Dupont-Gillain, C. C., Landoulsi, J., Pancera, S. M., Genet, M. J., and Rouxhet, P. O. (2008). Enzymes at solid surfaces: Nature of the interfaces and physico-chemical processes. Electrochimica Acta, (in press.)
Callewaert, M., Rouxhet, P. O., and Boulangé-Petermann, L. (2005).Modifying stainless steel surfaces with responsive polymers: Effect of PS-PAA and PNIPAAM on cell adhesion and oil removal. J. Adhes. Sci. Technol. 19:765-781.
Carman, M. L., Estes, T. G., Feinberg, A. W., Schumacher, J. F., Wilkerson, W., Wilson, L. H., Callow, M. E., Callow, J. A., and Brennan, A. B. (2006). Engineered antifouling microtopographies correlating wettability with cell attachment. Biofouling. 22:11-21.
Carneiro, J. O., Teixeira, V., Portinha, A., Magãlhães, A., Coutinho, P., Tavares, C. J., and Newton, R. (2007). Iron-doped photocatalytic TiO2 sputtered coatings on plastics for self-cleaning applications. Mater. Sci. Eng. B-Solid State Mater. Adv. Technol. 138:144-150.
Cassie, A. B. D., and Baxter, S. (1944). Wettability on porous surfaces. Trans. Faraday Soc. 40:546-551.
Changani, S. D., Belmar-Beiny, M. T., and Fryer, P. J. (1997). Engineering and chemical factors associated with fouling and cleaning in milk processing. Exp. Therm. Fluid Sci. 14:392-406.
Chappard, D., Degasne, L, Hure, G., Legrand, E., Audran, M., and Basle, M. F. (2003). Image analysis measurements of roughness by texture and fractal analysis correlate with contact profilometry. Biomaterials. 24:1399-1407.
Cheng, Y.-T., Rodak, D. E., Angelopoulos, A., and Gacek, T. (2005). Microscopic observations of condensation of water on lotus leaves. Appl. Phys. Lett. 87: 194112-1-3.
Chibowski, E., and Gonzáles-Caballero, F. (1993). Theory and Practice of thinlayer wicking. Langmuir. 9:330-340.
Child, T. (2006). Antimicrobial surfaces in the food industry. New Food. 2:52- 56.
Cho, E. G., Kim, Y. D., and Cho, C. (2004). Thermally responsive poly(Nisopropylacrylamide) monolayer on gold: Synthesis, surface characterization, and protein interaction/adsorption studies. Polymer. 45:3195-3204.
Clint, J. H., and Wicks, A. C. (2001). Adhesion under water: Surface energy considerations. International Journal of Adhesion & Adhesives. 21:267-273.
Clint, J. H., Adhesion and components of solid surface energies. Curr. Opin. Colloid Interface Sci. 6:28-33.
Cong, Q., Chen, G.-H., Fang, Y., and Ren, L.-Q. (2004). Super-hydrophobic characteristics of butterfly wing surface. J. Bionics Eng. 1:249-255.
Crowe, J. A., and Genzer, J. (2005). Creating responsive surfaces with tailored wettability switching kinetics and reconstruction reversibility. J. Am. Chem. Soc. 127:17610-17611.
da Silva, R. M. P., Mano, J. F., and Reis, R. L. (2007). Smart thermoresponsive coatings and surfaces for tissue engineering: Switching cell-material boundaries. Trends Biotechnol. 25:577-583.
Daoud, W. A., Xin, J. H., Zhang, Y. H., and Mak, C. L. (2006). Pulsed laser deposition of superhydrophobic thin Teflon films on cellulosic fibers. Thin Solid Films. 515:835-836.
Detry, J. G., Rouxhet, P. G., Boulangé-Petermann, L., Deroanne, C., and Sindic, M. (2007). Cleanability assessment of model solid surfaces with a radial-flow cell. Colloid Surf. A-Physicochem. Eng. Asp. 302:540-548.
Drehlich, J., Tormoen, G. W., and Beach, E. R. (2004). Determination of solid surface tension from particle-substrate pull-off forces measured with the atomic force microscope. J. Colloid Inter. Sci. 280:484-497.
Du, J.W., Hajas, J., Scholz, W., Wooker, A., Frank, A., Jadliwala, J., Weber, B., and Wessels, W. (2005). New additive to enhance surface cleanability. Surf. Coat. Int. Pt. A-Coat. 88:18-22.
Dufŕene, Y. F., Boonaert, C. J. P., and Rouxhet, P. G. (1999). Role of proteins in the adhesion of Azospirillum brasilense to model substrata. In: Effect of Mineral-Organic-Microorganism Interactions on Soil and Freshwater Environments. pp. 261-274. Berthelin, J., Huang, P. M., Bollay, J. M., and Andreux, F., Eds. Kluwer Academic / Plenum Publishers, New York.
Dupont-Gillain, Ch. C., Adriaensen, Y., Derclaye, S., and Rouxhet, P. O. (2000). Plasma-oxidised polystyrene: Wetting properties and surface reconstruction. Langmuir. 16:8194-8200.
EHEDG. (2007). Materials of contraction for equipment in contact with food. Trends Food Sci. Technol. 18:S40-S50.
El Feninat, F., Elouatik, S., Ellis, T. H., Sacher, E., and Stangel, L. (2001). Quantitative assessment of surface roughness as measured by AFM: Application to polished human dentin. Appl. Surf. Sci. 183:205-215.
Ferrari, M., Ravera, F., Rao, S., and Liggieri, L. (2006). Surfactant adsorption at superhydrophobic surfaces. Appl. Phys. Lett. 89:053104-1-4.
Flint, S., Palmer, J., Bloemen, K., Brooks, J., and Crawford, R. (2001). The growth of Bacillus stearothermophilus on stainless steel. J. Appl. Microbiol. 90:151-157.
Flint, S. H., Brooks, J. D., and Bremer, P. J. (2000). Properties of the stainless steel substrate, influencing the adhesion of thermo-resistant streptococci. J. Food Eng. 43:235-242.
Foschino, R., Picozzi, C., Civardi, A., Bandini, M., and Faroldi, P. (2003). Comparison of surface sampling methods an cleanability assessment of stainless steel surfaces subjected or not to shot peening. J. Food Eng. 60: 375-381.
Frank, J. F., and Chmielewski, R. (2001). Influence of surface finish on the cleanability of stainless steel. J. Food Prot. 64:1178-1182.
Fukuzaki, S., Urano, H., and Nagata, K. (1995). Adsorption of protein onto stainless steel surfaces. J. Ferment. Bioeng. 80:6-11.
Gadelmawla, E. S., Koura, M. M., Maksoud, T. M. A., Elewa, I. M., and Soliman, H. H. (2002). Roughness parameters. J. Mater. Process. Technol. 123:133-145.
Gao, L., and McCarthy, T. J. (2007). How Wenzel and Cassie were Wrong. Langmuir. 23:3762-3765.
Geesey, G. G., Gillis, R. J., Avci, R., Daly, D., Hamilton, M., Shope, P., and Harkin, G. (1996). The influence of surface features on bacterial colonization and subsequent substratum chemical changes of 316L stainless steel. Corrosion Sci. 38:73-95.
Genzer, J., and Efimenko, K. (2006). Recent developments in superhydrophobic surfaces and their relevance to marine fouling: A review. Biofouling. 22:339-360.
Giessler, S., Just, E., and Störger, R. (2006). Easy-to-clean properties Just a temporary appearance? Thin Solid Films. 502:252-256.
Gil, E. S., and Hudson, S. M. (2004). Stimuli-responsive polymers and their bioconjugates. Progr. Polym. Sci. 29:1173-1222.
Good, R. J. (1993). Contact angle, wetting, and adhesion: A critical review. In: Contact Angle, Wettability and Adhesion, Mittal, K. S., Ed., VSP, Philadelphia. 3-36.
Gould, P. Smart, clean surfaces. Materials Today. 6:44-48.
Gudipati, C. S., Finlay, J. A., Callow, J. A., Callow, M. E., and Wooley, K. L. (2005). The antifouling and fouling-release performances of hyperbranched fluoropolymer (HBFP) poly(ethylene glycol) (PEG) composite coating evaluated by adsorption of biomacromolecules and the green fouling alga. Ulva, Langmuir. 21:3044-3053.
Guillemot, G., Vaca-Medina, G., Martin-Yken, H., Vernhet, A., Schmitz, P., and Mercier-Bonin, M. (2006). Shear-flowinduced detachment of Saccharomyces cerevisiae from stainless steel: Influence of yeast and solid surface properties. Colloid Surf. B-Biointerfaces. 49:126-135.
Hashimoto, K., Irie, H., and Fujishima, A. (2005). TiO2 Photocatalysis: A historical overview and future prospects. Jpn. J. Appl. Phys. 44: 8269-8285.
Herminghaus, S. (2000). Roughness-induced non-wetting. Europhys. Lett. 52:165-170.
Hilbert, L. R., Bagge-Ravn, D., Kold, J., and Gram, L. (2003). Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance. Int. Biodeterior. Biodegrad. 52:175-185.
Hofmann, J., and Sommer, K. (2006). Hygienic design von anlagen und deren qualifizierungsmethoden. Chem. Ing. Tech. 78:1605-1614.
Holah, J. (2000). Food processing equipment design and cleanability, F-FE 377A/00, Dublin.
Holah, J. T., and Thorpe, R. H. (1990). Cleanability in relation to bacterial retention on unused and abraded domestic sink material. J. Appl. Bacter. 69:599-608.
Irie, H., and Hashimoto, H. (2005). Photocatalytic active surfaces and photoinduced high hydrophilicity/high hydrophobicity. Hdb. Env. Chem. 2:425-450.
Ista, L. K., Pérez-Luna, V. H., and Lopez, G. P. (1999). Surface-grafted, environmentally sensitive polymers for biofilm release. Appl Env. Microbiol. 65:1603-1609.
Jackson, L. S., Al-Taher, F. M., Moorman, M., DeVries, J. W., Tippett, R., Swanson, K. M. J., Fu, T. J., Salter, R., Dunaif, G., Estes, S., Albillos, S., and Gendel, S. M. (2008). Cleaning and other control and validation strategies to prevent allergen cross-contact in food-processing operations. J. FoodProt. 71:445-448.
Jahn, R., and Truckenbrodt, H. (2004). A simple fractal analysis method of the surface roughness. J. Mater. Process. Technol. 145:40-45.
Jennings, W. G. (1965). Theory and practice of hard-surface cleaning. Adv. Food Res. 14:325-458.
Jones, W. C. (1985). Testing surfaces for cleanliness. Metal Finishing. October:13-15.
Jullien, C., Bénezéch, T., Carpentier, B., Lebret, V., and Faille, C. (2002). Identification of surface characteristics relevant to the hygienic status of stainless steel for the food industry. J. Food Eng. 56:77-87.
Jung, Y. C., and Bhushan, B. (2007). Wetting transition of water droplets on superhydrophobic patterned surfaces. Scripta Mater. 57:1057-1060.
Kallio, T., Alajoki, S., Pore, V., Ritala, M., Laine, J., Leskelä, M., and Stenius, P. (2006). Antifouling properties of TiO2: Photocatalytic decomposition and adhesion of fatty and rosin acids, sterols and lipophilic wood extractives. Colloid Surf. A-Physicochem. Eng. Asp. 291:162-176.
Kang, X., Zi, W.-W., Xu, Z.-G., and Zhang, H.-L. (2007). Controlling the micro/nanostructure of self-cleaning polymer coating. Appl. Surf. Sci. 253:8830-8834.
Kaplan, M. C., Jégou, A., Chaufer, B., Rabiller-Baudry, M., and Michalski, M. C. (2002). Adsorption of lysozyme on membrane material and cleaning with non-ionic surfactant characterized through contact angle measurements. Desalination. 146:149-154.
Karbowiak, T., Debeaufort, F., and Voilley, A. (2006). Importance of surface tension characterisation for food, pharmaceutical and packaging products: A review. Crit. Rev. Food Sci. Nutr. 46:391-407.
Karlsson, C., Wahlgren, M., and Tragardh, C. (1998). Some surface-related aspects of the cleaning of new and reused stainless-steel surfaces fouled by protein. Int. Dairy J. 8:925-933.
Krishnan, S., Ayothi, R., Hexemer, A., Finlay, J. A., Sohn, K. E., Perry, R., Ober, C. K., Kramer, E. J., Callow, M. E., Callow, J. A., and Fischer, D. A. (2006). Anti-biofouling properties of comblike block copolymers with amphiphilic side chains. Langmuir. 22:5075-5086.
Krishnan, S., Wang, N., Ober, C. K., Finlay, J. A., Callow, M. E., Callow, J. A., Hexemer, A., Sohn, K. E., Kramer, E. J., and Fischer, D. A. (2006). Comparison of the fouling release properties of hydrophobic fluorinated and hydrophilic pegylated block copolymer surfaces: Attachment strength of the diatom Navicula and the Green Alga Ulva. Biomacromolecules. 7:1449-1462.
Kuisma, R., Fröberg, L., Kymäläinen, H. R., Pesonen-Leinonen, E., Piispanen, M., Melamies, P., Hautala, M., Sjöberg, A. M., and Hupa, L. (2007). Microstructure and cleanability of uncoated and fluoropolymer, zirconia and titania coated ceramic glazed surfaces. J. Em. Ceram. Soc. 27:101-108.
Kuisma, R., Pesonen-Leibonen, E., Redsven, I., Kymäläinen, H.-R., Saarikoski, I., Sjöberg, A.-M., and Hautala, M. (2005). Utilization of profilometry, SEM, AFM and contact angle measurement in describing surfaces of plastic floor coverings and explaining their cleanability. Surf. Sci. 584:119-125.
Kulkarni, S.M., Maxcy, R. B., and Arnold, R. G. (1975). Evaluation of soil deposition and removal processes: An interpretive review. J. Dairy Sci. 58:1922-1936.
Kulkulka, D. J., and Devgun, M. (2007). Fluid temperature and velocity effect on fouling. Appl. Therm. Eng. 27:2732-2744.
Kumar, A., Srivastava, A., Galaev, I. Y., and Mattiasson, B. (2007). Smart polymers: Physical forms and bioengineering applications. Progr. Polym. Sci. 32:1205-1237.
Kumar, G., and Prabhu, K. N. (2007). Review of non-reactive and reactive wetting of liquids on surfaces. Adv. Colloid Interface Sci. 133:61-89.
Lacroix, L. M., Lejeune, M., Ceriotti, L., Kormunda, M., Meziani, T., Colpo, P., and Rossi, F. (2005). Tuneable rough surfaces:Anewapproach for elaboration of superhydrophobic films. Surf. Sci. 592:182-188.
Leclercq-Perlat, M. N., and Lalande, M. (1994). Cleanability in relation to surface chemical composition and surface finishing of some materials commonly used in food industries. J.Food Eng. 23:501-517.
Leclercq-Perlat, M. N., Tissier, J. P., and Benezech, T. (1994). Cleanability of stainless steel in relation to chemical modifications due to industrial cleaning procedures used in the dairy industry. J. Food Eng. 23:449-465.
Lee, J. H., Lee, S. J., Khang, G., and Lee, H. B. (2000). The effect of fluid shear stress on endothelial cell adhesiveness to polymer surfaces with wettability gradient. J. Colloid Inter. Sci. 230:84-90.
List, W., and Müller, J. (2005). Reinigungsvalidierung unter besonderer Beriicksichtigung von Proteinriickstanden. Pharm. Ind. 67:1359-1365.
Liu, W., Fryer, P. J., Zhang, Z., and Liu, Y. (2006). Identification of cohesive and adhesive effects in the cleaning of food fouling deposits. Innovative Food Science and Emerging Technologies. 7:263-269.
Lugscheider, E., Bobzin, K., and Moller, M. (1999). The effect of PVD layer constitution on surface free energy. Thin Solid Films. 355-356:367-373.
Ma, M., and Hill, R. M. (2006). Superhydrophobic surfaces. Current Opinion in Colloid & Interfaces Science. 111:193-202.
Määttä, J., Koponen, H. K., Kymäläinen, H., Pesonen-Leinonen, E., Uusi-Rauva, A., Hurme, K. R., Sjöberg, A. M., Suvanto, M., and Pakkanen, T. A. (2007). Effect of platicizer and surface topography on the cleanability of platicized PVC materials. Appl. Surf. Sci. 253:5003-5010.
Määttä, J., Piispanen, M., Kuisma, R., Kymäläinen, H.-R., Uusi-Rauva, A., Hurme, K.-R., Areva, S., Sjöberg, A.-M., and Hupa, L. (2007). Effect of coating on the cleanability of glazed surfaces. J. Eur. Ceram. Soc. 27:4555-4560.
Meilert, K. T., Laub, D., and Kiwi, J. (2005). Photocatalytic self cleaning of midified cotton textiles by TiO2 clusters attached by chemical spacers. J. Mol. Catal A-Chem. 237:101-108.
Mellot, N. P., Durucan, C., and Guglielmi, M. (2006). Commercial and laboratory prepared titanium dioxide films for self-cleaning glasses: Photocatalytic performance and chemical stability. Thin Solid Films. 502:112-120.
Mettler, E., and Carpentier, B. (1998). Variation over time of microbial load and physicochemical properties of floor materials after cleaning in food industry premises. J. Food Prot. 61:57-65.
Michalski, M. C., and Briard, V. (2003). Fat-related surface tension and wetting properties of milk. Milchwissenschaft. 58:26-29.
Michalski, M.C., and Saramago, B. (2000). Static and dynamicwetting behavior of triglycerides on solid surfaces. J. Colloid Inter. Sci. 227:380-389.
Michalski, M. C., Brogueira, P., Gonçalves da Silva, A., and Saramago, B. (2001). Topography of collapsed triglyceride monolayers on glass. Eur. J. Lipid Sci. Technol. 103:677-682.
Michalski, M. C., Desobry, S., and Hardy, J. (1997). Food materials adhesion: A review. Crit. Rev. Food Sci. Nutr. 37:591-619.
Michalski, M. C., Desobry, S., and Hardy, J. (1998). Adhesion of edible oils and food emulsions to rough surfaces. Lebensmittel-Wissenschaft und Technologic. 31:495-502.
Michalski, M. C., Desobry, S., Babak, V., and Hardy, J. (1999). Adhesion of food emulsions to packaging and equipment surfaces. Colloid Surf. APhysicochem. Eng. Asp. 149:107-121.
Michalski, M. C., Desobry, S., Mousavi, M., and Hardy, J. (1998). Prediction of mass residues on food-contact surfaces from edible oils and their emulsions. J. Food Eng. 37:271-291.
Michalski, M. C., Desobry, S., Pons, M. N., and Hardy, J. (1998). Adhesion of edible oils to food contact surfaces. JAOCS. 75:447-454.
Michalski, M. C., Hardy, J., and Saramago, B. (1998).On the surface free energy of PVC/EVA polymer blends: Comparison of different calculation methods. J. Colloid Inter. Sci. 208:319-328.
Milledge, J. J., and Jowitt, R. (1980). The cleanability of stainless steel used as a food contact surface. Inst. Food. Sci. Technol Proceed. 13:57-62.
Miwa, M., Nakajima, A., Fujishima, A., Hashimoto, K., and Watanabe, T. (2000). Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces. Langmuir. 16:5754-5760.
Nandkumar, M. A., Yamato, M., Kushida, A., Konno, C., Hirose, M., Kikuchi, A., and Okano, T. (2002). Two-dimensional cell sheet manipulation of heterotypically co-cultured lung cells utilizing temperature-responsive culture dishes results in long-term maintenance of differentiated epithelial cell functions. Biomaterials. 23:1121-1130.
Narine, S. S., and Marangoni, A. G. (1999). Relating structure of fat crystal networks to mechanical properties: A review. Food Res. Int. 32:227-248.
Nath, N., and Chilkoti, A. (2002). Creating "smart" surfaces using stimuli responsive polymers. Adv. Mater. 14:1243-1247.
Nosonovsky, M., and Bhushan, B. (2007). Hierarchical roughness makes superhydrophobic states stable. Micro electron. Eng. 84:382-386.
Okano, T., Yamada, N., Okuhara, M., Sakai, H., and Sakurai, Y. (1995).Mechanism of cell detachment from temperature-moulated, hyrophilic-hydrophobic polymer surfaces. Biomaterials. 16:297-303.
Otten, A., and Herminghaus, S. (2004). How plants keep dry: A physicist's point of view. Langmuir. 20:2405-2408.
Owens, D. K., and Wendt, R. C. (1969). Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 13:1741-1747.
Paria, S. (2003). Studies on surfactant adsorption at the cellulose water interface, Ph D Diss. Indian Institute of Technology, Bombay, Powai, Mumbai, India.
Parkar, S. G., Flint, S. H., and Brooks, J. D. (2004). Evaluation of the effect of cleaning regimes on biofilms of thermophilic bacilli on stainless steel. J. Appl. Microbiol. 96:110-116.
Parkar, S. G., Flint, S. H., Palmer, J. S., and Brooks, J. D. (2001). Factors influencing attachment of thermophilic bacilli to stainless steel. J. Appl. Microbiol. 90:901-908.
Parkin, I. P., and Palgrave, R. G. (2005). Self-cleaning coatings. J. Mater. Chem. 15:1689-1695.
Patankar, N. A. (2003). On the modeling of hydrophobic contact angles on rough surfaces. Langmuir. 19:1249-1253.
Planinsek, O., Trojak, A., and Srcic, S. (2001). The dispersive component of the surface free energy of powders assessed using inverse gas chromatography and contact angle measurements. Int. J. Pharm. 221:211-217.
Poljacek, S. M., Risovic, D., Furic, K., and Gojo, M. (2008). Comparison of fractal and profilometric methods for surface topopgraphy characterization. Appl. Surf. Sci. 3449-3458.
Quittet, C., and Nelis, H. (1999). Guide HACCP Secteur produits laitiers, 1, Gembloux, Les Presses Agronomiques de Gembloux A.S.B.L.
Rabiller-Baudry, M., Bégoin, L., Delaunay, D., Paugman, L., and Chaufer, B. (2008). A dual approach of membrane cleaning based on physico-chemistry and hydrodynamics Application to PES membrane of dairy industry. Chem. Eng. Process. 47:267-275.
Rabiller-Baudry, M., Delaunay, D., Paugman, L., Bégoin, L., and Chaufer, B. (2006). Role of physico-chemical and hydrodynamic aspects in cleaning of spiral PES ultrafiltration membranes of dairy industry. Desalination. 1999:390-392.
Robine, E., Boulangé-Petermann, L., and Derangere, D. (2002). Assessing bacterial properties of materials: The case of metallic surfaces in contact with air. J. Microbiol. Methods. 49:225-234.
Rosmaninho, R., and Melo, L. F. (2006). Calcium phosphate deposition from simulated milk ultrafiltrate on different stainless steel-based surfaces. Int. Dairy J. 16:81-87.
Rosmaninho, R., and Melo, L. F. (2007). Effect of protein on calcium phosphate deposition in turbulent flow as a function of surface properties. Exp. Therm. Fluid Sci. 32:375-386.
Rosmaninho, R., and Melo, L. F. (2008). Protein-calcium phosphate interactions in fouling of modified stainless steel surfaces by simulated milk. Int. Dairy J. 18:72-80.
Rosmaninho, R., Rizzo, G., Müller-Steinhagen, H., and Melo, L. F. (2008). Deposition from a milk mineral solution on novel heat transfer surfaces under turbulent flow conditions. J. Food Eng. 85:29-41.
Rosmaninho, R., Rocha, F., Rizzo, G., M̈uller Steinhagen, H., and Melo, L. (2007). Calcium phosphate fouling on TiN-coated stainless steel surfaces: Role of ions and particles. Chem. Eng. Sci. 62:3821-3831.
Rosmaninho, R., Santos, O., Nylander, T., Paulsson, M., Beuf, M., Benezech, T., Yiantsios, S., Andritsos, N., Karabelas, A., Rizzo, G., Müuller-Steinhagen, H., and Melo, L.F. (2007).Modified stainless steel surfaces targeted to reduce fouling Evaluation of fouling by milk components. J. Food Eng. 80:1176-1187.
Rowan, C. (2005). Cleaning and sanitizing. Food & Beverage International. June: 46-49.
Saikhwan, P., Geddert, T., Augustin, W., Scholl, S., Paterson, W. R., and Wilson, D. I. (2006). Effect of surface treatment on cleaning of a model food soil. Surf. Coat. Technol. 201:943-951.
Santos, O., Nylander, T., Paulsson, M., and Trägardh, C. (2006). Whey protein adsorption onto steel surfaces effect of temperature, flow rate, residence time and aggregation. J.Food Eng. 74:523-528.
Santos, O., Nylander, T., Rosmaninho, R., Rizzo, G., Yiantsios, S., Andritos, N., Karabelas, A., Müller-Steinhagen, H., Melo, L., Boulangé-Petermann, L., Gabet, C., Braem, A., Tragardh, C., and Paulsson, M. (2004). Modified Stainless steel surfaces targeted to reduce fouling surface chracterization. J. Food Eng. 64:63-79.
Santos, O., Nylander, T., Schillén, K., Paulsson, M., and Tragardh, C. (2006). Effect of surface and bulk solution properties on the adsorption of whey protein onto steel surfaces at high temperature. J. Food Eng. 73:174-189.
Schlüsser, H. J., Zur Reinigung fester Oberflächen in der Lebensmittelindustrie. Milchwissenschaft. 25:133-145.
Schmähling, J., Hamprecht, F. A., and Hoffmann, D. M. P. (2006). A threedimensional measure of surface roughness based on mathematical morphology. Int. J. Mach. Tools Manuf. 46:1764-1769.
Serro, A. P., and Saramago, B. (2003). Influence of sterilization on the mineralization of titanium implants induced by incubation in various biological model fluids. Biomaterials. 24:4749-4760.
Serro, A. P., Bastos, M., Costa Pessoa, J., and Saramago, B. (2004). Bovine serum albumin conformational changes upon adsorption on titania and on hydroxyapatite and their relation with biomineralization. J. Biomed. Mater. Res. 70A:420-427.
Serro, A. P., Gispert, M. P., Martins, M. C. L., Brogueira, P., Colaço, R., and Saramago, B. (2006). Adsorption of albumin on prosthetic materials: Implication for tribological behavior. J. Biomed. Mater. Res. 78A:581-589.
Sharma, S. K., and Rao, K. H. (2002). Analysis of different approaches for the evaluation of surface energy of microbial cells by contact angle goniometry. Adv. Colloid Interface Sci. 98:341-463.
Siebold, A., Walliser, A., Nardin, M., Oppliger, M., and Schultz, J. (1997). Capillary rise for thermodynamic characterization of solid particle surface. J. Colloid Inter. Sci. 186:60-70.
Stephan, O., Weisz, N., Vieths, S., Weiser, T., Rabe, B., and Vatterott, W. (2004). Protein quantification, sandwitch ELISA, and real-time PCR used to monitor industrial cleaning procedures for contamination with peanut and celery allergens. J.AOAC Int. 87:1448-1457.
Sun, T., Wang, G., Feng, L., Liu, B., Ma, Y., Jiang, L., and Zhu, D. (2004). Reversible switching between superhydrophilicity and superhydrophobicity. Angew. Chem. Int. Ed. 43:357-360.
Tanaka, M., Komagata, M., Tsukada, M., and Kamiya, H. (2008). Fractal analysis of the influence of surface roughness of toner particles on their flow properties and adhesion behavior. Powder Technol. 186:1-8.
Taylor, J. H., and Holah, J. T. (1996). A comparative evaluation with respect to the bacterial cleanability of a range of wall and floor surface materials used in the food industry. J. Appl. Bacter. 81:262-266.
Teixeira, P., Azeredo, J., Oliveira, R., and Chibowski, E. (1998). Interfacial interactions between nitrifying bacteria andmineral carriers in aqueousmedia determined by contact angle measurements and thin layer wicking. Colloid Surf. B-Biointerfaces. 12:69-75.
Thoreau, V., Boulangé, L., and Joud, J.-C. (2005). Adsorption from Dextran solutions: Influence of stainless steel substrates. Colloid Surf. A-Physicochem. Eng. Asp. 261:141-146.
Tomasetti, E., Rouxhet, P. O., and Legras, R. (1998). Viscoelastic behavior of polymer surface duringwetting and dewetting processes. Langmuir. 14:3435-3439.
Tsuda, Y., Kikuchi, A., Yamato, M., Nakao, A., Sakurai, Y., Umezu, M., and Okano, T. (2005). The use of patterned dual thermoresponsive surfaces for the collective recovery as co-cultured cell sheets. Biomaterials. 26: 1885-1893.
van Oss, C. J. (2007). Development and application of the interfacial tension between water and organic or biological surfaces. Colloid Surf. B-Biointerfaces. 54:2-9.
van Oss, C. J., Good, R. J., and Chaudhury, M. K. (1988). Additive and nonadditive surface tension components and the interpretation of contact angles. Langmuir. 4:884-891.
Verran, J., Airey, P., Packer, A., and Whitehead, K. A. (2008). Chapter 8: Microbial retention on open food contact surfaces and implications for food contamination. Adv. Appl. Microbiol. 64:223-246.
Verran, J., Boyd, R. D., Hall, K., and West, R. H. (2001). Microbiological and chemical analyses of stainless steel and ceramics subjected to repeated soiling and cleaning treatments. J. Food Prot. 64:1377-1387.
Verran, J., Rowe, D. L., and Boyd, R. D. (2001). The effect of nanometer dimension topographical features on the hygienic status of stainless steel. J. Food Prot. 64:1183-1187.
Verran, J., Rowe, D. L., Cole, D., and Boyd, R. D. (2000). The use of the atomic force microscope to visualise and measure wear of food contact surfaces. Int. Biodeterior. Biodegrad. 46:99-105.
Watson, G. S., andWatson, J. A. (2004).Natural nano-structures on insects - possible fonctions of ordered arrays characterized by atomic force microscopy. Appl. Surf. Sci. 235:139-144.
Wenzel, R. N. (1936). Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28:988-994.
Whitehead, K. A., Colligon, J., and Verran, J. (2005). Retention of microbial cells in substratum surface features of micrometer and sub-micrometer dimensions. Colloid Surf. BBiointerfaces. 41:129-138.
Whitehead, K. A., Rogers, D., Colligon, J., Wright, C., and Verran, J. (2006).Use of the atomic force microscope to determine the effects of substratum surface topography on the ease of bacterial removal. Colloid Surf. B-Biointerfaces. 51:44-53.
Wilson, L. (2005). Challenges in cleaning: Recent developments and future prospects. Heat Transf. Eng. 26:51-59.
Wirtanen, G., Ahola, H., andMattila-Sandholm, T. (1995). Evaluation of cleaning procedures inelimination of biofilm from stainless steel surfaces in open process equipment. Trans IChemE Part C. 73:9-16.
Wirtanen, G., Husmark, U., and Mattila-Sandholm, T. (1996). Microbial evaluation of the biotransfer potential from surfaces with bacillus biofilms after rinsing and cleaning procedures in closed food-processing systems. J.Food Prot. 59:727-733.
Wolansky, G., and Marmur, A. (1999). Apparent contact angles on rough surfaces: TheWenzel equation revisited. Colloid Surf. A-Physicochem. Eng. Asp. 156:381-388.
Wu, L. Y. L., Soutar, A. M., and Zeng, X. T. (2005). Increasing hydrophobicity of sol-gel hard coatings by chemical and morphological modifications. Surf. Coat. Technol. 198:420-424.
Xia, R, Feng, L., Wang, S., Sun, T., Song, W., Jiang, W., and Jiang, L. (2006). Dual-responsive surfaces that switch between superhydrophilicity and superhydrophobicity. Adv. Mater. 18:432-436.
Yamato, M., Konno, C., Kikuchi, A., and Okano, T. (2002). Thermally responsive polymer-grafted surfaces facilitate patterned cell seeding and co-culture. Biomaterials. 23:561-567.
Yamato, M., Konno, C., Kushida, A., Hirose, M., Utsumi, M., Kikuchi, A., and Okano, T. (2000). Release of adsorbed fibronectin from temperatureresponsive culture surfaces requires cellular activity. Biomaterials. 21:981-986.
Yang, J., McGuire, J., and Kolbe, E. (1991). Use of the equilibrium contact angle as an index of contact surface cleanliness. J. Food Prot. 54:879-884.
Yokota, S., Matsuyama, K., Kitaoka, T., and Wariishi, H. (2007). Thermally responsive wettability of self-assembled methylcellulose nanolayers. Appl. Surf. Sci. 253:5149-5154.
Yu, M., Gu, G., Meng, W. D., and Qing, F. L. (2007). Superhydrophobic cotton fabric coating based on a complex layer of silica nanoparticles and perfluorooctylated quaternary ammonium silane coupling agent. Appl Surf. Sci. 253:3669-3673.
Yuranova, T., Mosteo, R., Bandara, J., Laub, D., and Kiwi, J. (2006). Selfcleaning cotton textiles surfaces modified by photoactive SiO2/TiO2 coating. J. Mol. Catal. A-Chem. 244:160-167.
Zhang, H., Lamb, R., and Lewis, J. (2005). Engineering nanoscale roughness on hydrophobic surface preliminary assessment of fouling behaviour. Sci. Technol. Adv. Mater. 6:236-239.
Zhao, Q., Liu, Y., Wang, C., Wang, S., and Müller-Steinhagen, H. (2005). Effect of surface free energy on the adhesion of biofouling and crystalline fouling. Chem. Eng. Sci. 60:4858-4865.
Zhu, Y., Shi, M., Wu, X., and Yang, S. (2007). Amphiphilic copolymer grafted "smart surface" enhanced by surface roughness. J. Colloid Inter. Sci. 315:580-587.
