The NSF funded Center for Polymeric Interfaces and Macromolecular Assemblies (CPIMA) under cooperative agreement DMR-9400354 The Swedish-American Foundation BELSPO - SPP Politique scientifique - Service Public Fédéral de Programmation Politique scientifique
(a) P. J. Flory, J. Am. Chem. Soc., 75, 2718 (1952);
(b) Y. H. Kim and O. W. Webster, J. Am. Chem. Soc., 112, 4592 (1990);
(c) H. R. Kricheldorf, Q. Z. Zhang, and G. Schwarz, Polymer, 23, 1821 (1982);
(d) H. R. Kricheldorf and G. Lohden, Macromol. Chem. Phys., 196, 1839 (1995);
(e) V. Percec and M. Kawasumi, Macromolecules, 25, 3843 (1992);
(f) M. Johansson, E. Malmström, and A. Huit, J. Polym. Sci., Part A: Chem. Ed., 31, 619 (1993);
(g) E. Malmström, M. Johansson, and A. Huit, Macromolecules, 28, 1698 (1995);
(h) C. Hawker, R. Lee, and J. M. J. Fréchet, Am. Chem. Soc., 113, 4583 (1991);
(i) B. I. Voit and J. Mourey, Macromolecules, 26, 8607 (1993).
(a) J. M. J. Fréchet, Science, 263, 1710 (1994);
(b) O. W. Webster, ibid, 251, 887 (1991);
(c) R. P. Quirk, D. J. Kinning, and L. J. Fetters, In Comprehensive Polymer Science, vol. 7, S. L. Aggarwal, Ed., Pergamon, New York, 1989, p. 1;
(d) D. A. Tomalia, H. Baker, J. Dewald, M. Hall, G. Kallos, R. Martin, J. Ryder, and P. Smith, Polym. J., 17, 117 (1985);
(e) C. J. Hawker, J. M. J. Fréchet, J. Am. Chem. Soc., 112, 7638 (1990);
(f) C. J. Hawker and J. M. J. Fréchet, In Comprehensive Polymer Science, Suppl. 2, S. L. Aggarwal, and S. Russo, Eds., Pergamon, Oxford, 1996, p. 71;
(g) D. A. Tomalia, A. M. Naylor, and W. A. Goddard, Jr., Angew. Chem. Int. Ed. Engl, 29, 138 (1990);
(h) H. Ihre, M. Johansson, E. Malmström, and A. Hult, Adv. Dendritic Macromol. 3, 1 (1996).
(a) D. A. Tomalia, D. M. Hedstrand, and M. S. Ferritto, Macromolecules, 24, 1435 (1991).
(b) R. Yin, D. R. Swanson, and D. A. Tomalia, Polym. Mater. Sci. Eng., 73, 277 (1995);
(c) M. Gauthier and M. Möller, Macromolecules, 24, 4548 (1991);
(d) M. Gautheir, W. Li, and L. Tichagwa, Polym. Mater. Sci. Eng., 73, 232 (1995);
(e) E. Cloutet, J. L. Fillaut, Y. Gnanou, and D. Astruc, J. Chem. Soc., Chem. Commun., 2433 (1994);
(f) E. Cloutet, J. L. Six, D. Taton, and Y. Gnanou, Polym. Mater. Sci. Eng., 73, 133 (1995);
(g) J.-L. Six and Y. Gnanou, Macromol. Symp., 95, 137 (1995);
(h) R. Grubbs, C. J. Hawker, J. Dao, and J. M. J. Fréchet, Angew. Chem. Int. Ed. Engl., 36, 270 (1997).
(a) C. J. Hawker, J. M. J. Fréchet, Polymer, 33, 1507 (1992);
(b) D. A. Tomalia, V. Berry, M. Hall, and D. M. Hedstrand, Macromolecules, 20, 1164 (1987);
(c) G. R. Newkome, C. N. Moorefield, G. R. Baker, M. J. Saunders, and S. H. Grossman, Angew. Chem., Int. Ed. Engl., 30, 1178 (1991);
(d) I. Gitsov, J. M. J. Fréchet, Macromolecules, 26, 6536 (1993);
(e) T. M. Chapman, G. L. Hillyer, E. J. Mahan, and K. A. Schaffer, J. Am. Chem. Soc., 116, 11,195 (1994);
(f) C. J. Hawker, K. L. Wooley, R. Lee, and J. M. J. Fréchet, Polym. Mater. Sci. Eng., 64, 73 (1991);
(g) W. Claussen, N. Schulte, and A. D. Schlüter, Macromol. Rapid Commun., 16, 89 (1995);
(h) K. L. Wooley, J. M. J. Fréchet, Polym. Mater. Sci. Eng., 67, 90 (1992);
(i) I. Gitsov, K. L. Wooley, C. J. Hawker, and J. M. J. Fréchet, Polym. Prepr., 32, 631 (1991).
(a) M. Trollsås and J. L. Hedrick, Macromolecules, 31, 4390 (1998);
(b) M. Trollsås, B. Atthoff, H. Claesson, and J. L. Hedrick, Macromolecules, 31, 3439 (1998).
M. Trollsås, J. L. Hedrick, D. Mecerreyes, Ph. Dubois, R. Jéröme, H. Ihre, and A. Huit, Macromolecues, 30, 8508 (1997).
M. Trollsås, J. L. Hedrick, D. Mecerreyes, Ph. Dubois, R. Jéröme, H. Ihre, and A. Huit, Macromolecules, 31, 2756 (1998).
M. Trollsås, J. L. Hedrick, Ph. Dubois, R. Jéröme, J. Polym. Sci.: Polym. Chem. Ed., Part A, 36, 1345 (1998).
J. S. Moore and S. I. Stupp, Macromolecules, 23, 65 (1990).
(a) D. Tian, P. Dubois, C. Grandfils, and R. Jéröme, Macromolecules, 30, 406 (1997);
(b) D. Tian, Ph.D. Thesis, University of Liege, Belgium, 1997;
(c) D. Tian, O. Halleux, Ph. Dubois, R. Jérôme, R. Sobry, and G. Van den Bossche, Macromolecules, 31, 924 (1998).
The polymerization of ε-caprolactone (and/or TOSUO) was initiated with bis-MPA or its derivatives using a catalytic amount of Sn(Oct)2. The polymerizations were carried out in the melt at 100°C (20 h). The polymers were then dissolved in THF and precipitated in cold methanol.
1H-NMR spectra were recorded with a Bruker AM 250 (250 MHz) spectrometer. The number average molecular weights were calculated from the intensity ratios of the -OCH2- methylene proton signals (δ = 3.65) in the 1H-NMR spectra. Size-exclusion chromatography was carried out on a Waters chromatograph connected to a Waters 410 differential refractometer. Four 5 μm Waters columns (300 × 7.7 mm) connected in series in order of increasing pore size (100, 1000, 105, and 106 Å) were used with THF as solvent. Glass transition temperatures (Tg) were recorded on a Perkin-Elmer DSC 7.
A general procedure for the preparation of AB2 functional α-carboxylic-ω-dihydroxy poly(ε-caprolactone) (3-n). Pd/C (0.40 g) was added to a solution of 1-20 (4.00 g) in THF (10 mL) and EtOAc (40 mL). The flask was evacuated and put under H2(g) atmosphere. The reaction was stopped after 24 h, the Pd/C was filtered off and the clear solution was precipitated into cold methanol. The obtained macromonomer was a white crystalline powder. Yield: 3.00 g.
Polymerization of α-carboxylic-ω-dihydroxy poly(ε-caprolactone) (1-20). The macromonomer 1-20 (1.00 g, 0.33 mmol) was dissolved in CH2Cl2 (3 mL) in a previously flamed flask, into which a solution of DPTS (16.0 mg, 0.05 mmol) in THF and then DCC (0.10 g, 0.50 mmol) was added. After 48 h the reaction mixture was precipitated into methanol and then filtered to yield 0.87 g (87%) of hyperbranched polymer 4-c.
Deacetalization of TOSUO containing copolymers: ε-CL/TOSUO block copolymer (2.4 mmol of TOSUO) and triphenylcarbenium tetrafluoroborate (2.5 mmol) were dissolved under stirring for 30 min in 100 mL of dichloromethane (3 wt % copolymer). The copolyester was recovered by precipitation in cold methanol. Reduction of ketone pendent groups into hydroxyl groups: Copolyester A (1.2 mmol of ketone) and sodium borohydride (1.45 mmol) were dissolved under stirring in a CH2Cl2/ ethanol (5/2 v/v) mixture (ca. 1.0 wt % copolymer for min. The polymer was isolated by precipitation in cold methanol.