[en] In recent years, the construction of increasingly taller and more efficient structures, especially in the field of towers and masts, has required the development of high-performance steel profiles that can withstand new loads. In response to this growing demand, high-strength hot-rolled angles up to S460 have been introduced to the steel market. However, despite the existence of evidence demonstrating that the detrimental influence of geometrical and material imperfections decreases with increasing yield strength, the same buckling curve is frequently recommended for different steel grades. For instance, in the forthcoming design specifications for hot-rolled sections in the next generation of Eurocodes, only the S460 grade benefits from a higher buckling curve while the same buckling curve is recommended for grades up to S420. In a first step, this paper illustrates the beneficial effect of the yield strength on the stability of steel angles subjected to pure compression and highlights the limitations of the current stepwise evolution of the imperfection factor in the design rules, based on a review of existing buckling tests and a series of numerical simulations on hot-rolled equal-leg angle members. In a second step, a new modified imperfection factor evolving with the steel grade is proposed and validated, in order to better reflect the beneficial effect of the yield strength on buckling resistance, for both existing and future emerging steel grades.
Disciplines :
Civil engineering
Author, co-author :
Saufnay, Loris ; Université de Liège - ULiège > Urban and Environmental Engineering
L. Saufnay, High-strength steels and innovative design approaches for sustainable steel structures, University of Liège, Liège, 2025.
L. Saufnay and J.-F. Demonceau, Economic and environmental assessment of high-strength steel grades, ce/papers, vol. 6, no. 3–4, pp. 527–532, 2023.
L. Saufnay and J.-F. Demonceau, Establishment of reliable relative price predictions for high-strength steel members, Steel Construction, 2023, doi:https://doi.org/10.1002/stco.202300013.
G.L. Griffis, G. Axmann, B.V. Patel, C.M. Waggoner, and J. Vinson, High-strength steel in the long-span retractable roof of reliant stadium, 2003 NASCC Proc., Baltimore, 2003.
N. Baddoo and A. Chen, High Strength Steel Design and Execution Guide, SCI (the Steel Construction 397 Institute), vol. 398, 2020.
K. Mela and M. Heinisuo, Weight and cost optimization of welded high strength steel beams, Eng. Struct., vol. 79, pp. 354–364, Nov. 2014, doi:10.1016/J.ENGSTRUCT.2014.08.028.
L. Cederfelt J.-O. Sperle High strength steel in the roof of swedbank arena savings in weight, cost and environmental impact Nordic Steel Construction Conference 2012 Olso Norway.
M. Sansom and R.M. Lawson, STROnger Steels in the Built Environment (STROBE) - Deliverable 5.1: WP 5: Life cycle assessment of comparative conventional strength & HSS designs, 2021.
L. Saufnay and J.-F. Demonceau, High-strength steels in steel structures: How to select the appropriate steel grade?, Structures, vol. 82, p. 110820, Dec. 2025, doi:10.1016/J.ISTRUC.2025.110820.
M.-Z. Bezas, J.-F. Demonceau, I. Vayas, and J.-P. Jaspart, Experimental and numerical investigations on large angle high strength steel columns, Thin-walled structures, vol. 159, p. 107287, 2021, doi:10.1016/j.tws.2020.107287.
H.Y. Ban, G. Shi, Y.J. Shi, and Y.Q. Wang, Column buckling tests of 420 MPa high-strength steel single equal angles, International Journal of Structural Stability and Dynamics, vol. 13, no. 02, p. 1250069, 2013, doi:10.1142/S0219455412500691.
A. Spiliopoulos, M.-E. Dasiou, P. Thanopoulos, and I. Vayas, Experimental tests on members made from rolled angle sections, Steel Construction, vol. 11, no. 1, pp. 84–93, 2018, doi:https://doi.org/10.1002/stco.201710023.
M. Kettler, G. Lichtl, and H. Unterweger, Experimental tests on bolted steel angles in compression with varying end supports, J. Constr. Steel Res., vol. 155, pp. 301–315, 2019, doi:https://doi.org/10.1016/j.jcsr.2018.12.030.
L. Saufnay, A. Beyer, J.-P. Jaspart, and J.-F. Demonceau, Experimental and Numerical Investigations on Closely Spaced Built-Up Angle Members, Journal of Structural Engineering, vol. 149, no. 4, p. 4023012, 2023, doi:10.1061/JSENDH.STENG-11642.
M.-Z. Bezas, J.-F. Demonceau, I. Vayas, and J.-P. Jaspart, Compression tests on large angle columns in high-strength steel, Steel Construction, vol. 15, no. 1, pp. 43–47, 2022, doi:https://doi.org/10.1002/stco.202100051.
Z. Huang, H. Liu, H. Liu, and Z. Li, Experimental study on stability behavior of equal-leg angle steel columns, Thin-Walled Structures, vol. 166, p. 108042, 2021, doi:https://doi.org/10.1016/j.tws.2021.108042.
M.-Z. Bezas et al., Buckling resistance of star-battened angle members made of high-strength steel, Structures, vol. 58, p. 105274, 2023, doi:https://doi.org/10.1016/j.istruc.2023.105274.
I. Vayas, A. Charalampakis, and V. Koumousis, Inelastic resistance of angle sections subjected to biaxial bending and normal forces, Steel Construction, vol. 2, no. 2, pp. 138–146, 2009, doi:https://doi.org/10.1002/stco.200910018.
N. Schillo and M. Feldmann, Buckling resistance of L-profiles in towers, masts and open line constructions, Stahlbau, vol. 84, no. 12, pp. 946–954, 2015, doi:https://doi.org/10.1002/stab.201510335.
H. Farhoud, M.-Z. Bezas, J.-F. Demonceau, J.-P. Jaspart, and I. Vayas, Buckling Strength of Rolled Angles: Comparison between International Codes, Journal of Structural Engineering, vol. 150, no. 9, p. 4024122, 2024, doi:10.1061/JSENDH.STENG-12984.
Y. Sun, D. Song, S. Sun, and Y. Guo, Behavior of large-size and high-strength steel angle subjected to eccentric load, Structures, vol. 57, p. 105161, 2023, doi:https://doi.org/10.1016/j.istruc.2023.105161.
L. Zhang and J.P. Jaspart, Stability of members in compression made of large hot-rolled and welded angles, Université de Liège, 2013.
P. Može, L.G. Cajot, F. Sinur, K. Rejec, and D. Beg, Residual stress distribution of large steel equal leg angles, Eng. Struct., vol. 71, pp. 35–47, Jul. 2014, doi:10.1016/J.ENGSTRUCT.2014.03.040.
H. Chen, H. Chen, K. Cao, and Y. Guo, Study on Axial Compression Stability of Q345 Large-Section Angle Steel Columns, Buildings, vol. 13, no. 4, 2023, doi:10.3390/buildings13041030.
H. Chen, D. Zeng, K. Cao, and Y. Guo, Buckling behavior and design of large-section angle steel columns under axial compression, Journal of Building Engineering, vol. 78, p. 107578, Nov. 2023, doi:10.1016/J.JOBE.2023.107578.
S. Kitipornchai and H.W. Lee, Inelastic experiments on angle and tee struts, J. Constr. Steel Res., vol. 6, no. 3, pp. 219–236, Jan. 1986, doi:10.1016/0143-974X(86)90035-0.
S. Chen and X. Wang, Buckling Strength of Single Angle Struts Part 1: Angles Subject to Axial Compression, Advances in Structural Engineering, vol. 16, no. 6, pp. 1129–1137, 2013, doi:10.1260/1369-4332.16.6.1129.
M.-Z. Bezas, J.-F. Demonceau, I. Vayas, and J.-P. Jaspart, Design rules for equal-leg angle members subjected to compression and bending, J. Constr. Steel Res., vol. 189, p. 107092, 2022.
CEN, EN1993–1-1:2005: Eurocode 3: Design of steel structures - Part 1–1: General rules and rules for buildings, Brussels, 2005
CEN, EN1993–1-1:2022: Eurocode 3: Design of steel structures - Part 1–1: General rules and rules for buildings, Brussels, 2022
CEN, EN 1993-3-1: Design of steel structures - Part 3-1: Towers, masts and chimneys, Brussels, 2005.
CEN prEN 1993-3 Design of steel structures - Part 3: Towers, masts and chimneys. Brussels. p. 2022.
CEN, EN1993-1-5: Eurocode 3: Design of steel structures – Part 1-5: Plated structural elements, Brussels, 2005.
M.-Z. Bezas, J.-P. Jaspart, I. Vayas, and J.-F. Demonceau, New Consistent Set of Design Equations for Equal-leg Angle Sections and Members, ce/papers, vol. 5, no. 4, pp. 874–881, 2022, doi:https://doi.org/10.1002/cepa.1830.
Vayas I., Reyes R., Arnau M.R., Évora C., Delgado A. Innovative solutions for design and strengthening of telecommunications and transmission lattice towers using large angles from high strength steel and hybrid techniques of angles with FRP strips (ANGELHY): Final report. 2021.
M.-Z. Bezas, J.-F. Demonceau, I. Vayas, and J.-P. Jaspart, Classification and cross-section resistance of equal-leg rolled angle profiles, J. Constr. Steel Res., vol. 185, p. 106842, 2021, doi:https://doi.org/10.1016/j.jcsr.2021.106842.
S. Antonodimitraki et al., Buckling resistance of angle bracing members with one-leg bolted end connections, ce/papers, vol. 6, no. 3–4, pp. 1157–1162, 2023, doi:https://doi.org/10.1002/cepa.2432.
M. Kettler, A. Taras, and H. Unterweger, Member capacity of bolted steel angles in compression – Influence of realistic end supports, J. Constr. Steel Res., vol. 130, pp. 22–35, 2017, doi:https://doi.org/10.1016/j.jcsr.2016.11.021.
B. Behzadi-Sofiani, L. Gardner, M.A. Wadee, P.B. Dinis, and D. Camotim, Behaviour and design of fixed-ended steel equal-leg angle section columns, J. Constr. Steel Res., vol. 182, p. 106649, 2021, doi:https://doi.org/10.1016/j.jcsr.2021.106649.
D. Camotim, P.B. Dinis, and A. Landesmann, Behavior, Failure, and Direct Strength Method Design of Steel Angle Columns: Geometrical Simplicity versus Structural Complexity, Journal of Structural Engineering, vol. 146, no. 11, p. 4020226, 2020, doi:10.1061/(ASCE)ST.1943-541X.0002742.
J. Strating and H. Vos, Computer Simulation of the ECCS Buckling Curve using a Monte-Carlo Method, in Construction Métallique, vol. 2, 1973, pp. 23–39.
J. Rondal and R. Maquoi, Single equation for SSRC column-strength curves, Journal of the Structural Division, vol. 105, no. 1, pp. 247–250, 1979.
R. Maquoi and J. Rondal, Mise en équation des nouvelles courbes européennes de flambement, 1978.
D. Sfintesco, Fondement expérimental des courbes européennes de flambement, Construction métallique, vol. 3, pp. 5–12, 1970.
H. Beer and G. Schulz, Bases théoriques des courbes européennes de flambement, Construction Métallique, vol. 3, no. 485, pp. 37–57, 1970.
X. Meng and L. Gardner, Behavior and design of normal-and high-strength steel SHS and RHS columns, Journal of Structural Engineering, vol. 146, no. 11, p. 4020227, 2020.
S.H. Al-Sayed and R. Bjorhovde, Experimental study of single angle columns, J. Constr. Steel Res., vol. 12, no. 2, pp. 83–102, 1989.
S.M. R. Adluri and M.K. S. Madugula, Flexural Buckling of Steel Angles: Experimental Investigation, Journal of Structural Engineering, vol. 122, no. 3, pp. 309–317, 1996, doi:10.1061/(ASCE)0733-9445(1996)122:3(309).
S.M. R. Adluri and M.K. S. Madugula, Development of Column Curve for Steel Angles, Journal of Structural Engineering, vol. 122, no. 3, pp. 318–325, 1996, doi:10.1061/(ASCE)0733-9445(1996)122:3(318).
K. Cao, Y.J. Guo, and D.W. Zeng, Buckling behavior of large-section and 420 MPa high-strength angle steel columns, J. Constr. Steel Res., vol. 111, pp. 11–20, Aug. 2015, doi:10.1016/J.JCSR.2015.03.014.
S. Qu, J. Wang, Y. Guo, J. Hao, and X. Yang, Experiment and code-based study on high-strength steel pin-ended angles under axial compression, Thin-Walled Structures, vol. 149, p. 106541, Apr. 2020, doi:10.1016/J.TWS.2019.106541.
R. Maquoi, Some improvements to the buckling design of centrally loaded columns, in Structural Stability Research Council, Proceedings of the Annual Meeting, 1982.
B. Johansson, Buckling Resistance of Structures of High Strength Steel, in Use and application of high-performance steels for steel structures, IABSE., International Association for Bridge and Structural Engineering (IABSE), 2005, ch. 5.3, pp. 120–128.
M. Feldmann et al., Rules on high strength steels (RUOSTE): Final report, 2016. Accessed: Jul. 13, 2021. [Online]. Available: https://op.europa.eu/en/publication-detail/-/publication/515285b0-c820-11e6-a6db-01aa75ed71a1.
B. Somodi and B. Kövesdi, Flexural buckling resistance of cold-formed HSS hollow section members,” J. Constr. Steel Res., vol. 128, pp. 179–192, 2017.
B. Somodi and B. Kövesdi, Flexural buckling resistance of welded HSS box section members,” Thin-Walled Structures, vol. 119, pp. 266–281, 2017.
L. Saufnay, J.-P. Jaspart, and J.-F. Demonceau, Improvement of the prediction of the flexural buckling resistance of hot-rolled mild and high-strength steel members, Eng. Struct., vol. 315, p. 118460, 2024.
N. Baddoo et al., Stronger steels in the built environment (STROBE): Final report, 2021.
X. Yun, Y. Zhu, X. Meng, and L. Gardner, Welded steel I-section columns: Residual stresses, testing, simulation and design, Eng. Struct., vol. 282, p. 115631, 2023, doi:https://doi.org/10.1016/j.engstruct.2023.115631.
J. Jönsson and T.-C. Stan, European column buckling curves and finite element modelling including high strength steels, J. Constr. Steel Res., vol. 128, pp. 136–151, 2017.
H. Fang, T.-M. Chan, and B. Young, Structural performance of cold-formed high strength steel tubular columns, Eng. Struct., vol. 177, pp. 473–488, 2018, doi:https://doi.org/10.1016/j.engstruct.2018.09.082.
Greisch office and University of Liège. FineLg: non-linear finite element analysis program: user’s manual. Liège; 2018.
ABAQUS, “Abaqus 6.14: User’s manual, Simulia, no. Version 6.14, p. v6, 2014.
N. Boissonnade and H. Somja, Influence of imperfections in FEM modelling of lateral torsional buckling, in Proceedings of the Annual Stability Conference, 2012, pp. 18–21.
N. Boissonnade, H. Degée, J. Naumes, and M. Oppe, Experimental and numerical investigations for I-girders in bending and shear stiffened by trapezoidal stiffeners, Advanced Steel Construction, vol. 4, no. 1, pp. 1–12, 2008.
V. de Goyet, L’analyse statique non linéaire par la méthode des éléments finis des structures spatiales formées de poutres à section non symétrique, Université de Liège, 1989.
M.Z. Bezas, J.P. Jaspart, I. Vayas, and J.F. Demonceau, Design recommendations for the stability of transmission steel lattice towers, Eng. Struct., vol. 252, p. 113603, Feb. 2022, doi:10.1016/J.ENGSTRUCT.2021.113603.
J. Wang and L. Gardner, Flexural buckling of hot-finished high-strength steel SHS and RHS columns, Journal of Structural Engineering, vol. 143, no. 6, p. 4017028, 2017.
M.-Z. Bezas, Design of lattice towers from hot-rolled equal leg steel angles. Université de Liège (Belgium), 2021.
CEN, “EN10025-2: Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels,” Brussels, 2019.
CEN, EN10025-4: Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels, Brussels, 2019.
T. Tankova, L.S. da Silva, and F. Rodrigues, Buckling curve selection for HSS welded I-section members, Thin-Walled Structures, vol. 177, p. 109430, 2022.
R.C. Spoorenberg, H.H. Snijder, L.-G. Cajot, and N. Popa, Buckling curves for heavy wide flange QST columns based on statistical evaluation, J. Constr. Steel Res., vol. 101, pp. 280–289, 2014.
CEN, FprEN1993-1-14: Eurocode 3: Design of steel structures — Part 1-14: Design assisted by finite element analysis, Brussels, 2024.
J.O. Gomes Jr, H. Carvalho, L.S. da Silva, J.O. Ferreira Filho, and A. Lavall, Assessment of design procedures for the buckling resistance of hot-rolled steel equal leg angles under concentric and eccentric compression, in Structures, 2023, p. 105308.
ECCS, Manual on stability of steel structures. S. l: [s. n.], 1976.
G. Shi, Z. Zhang, L. Zhou, and Y. Gao, Experimental study and modeling of residual stresses of Q420 large-section angles, J. Constr. Steel Res., vol. 167, p. 105958, 2020, doi:https://doi.org/10.1016/j.jcsr.2020.105958.
H. Ban, G. Shi, Y. Shi, and Y. Wang, Residual Stress Tests of High-Strength Steel Equal Angles, Journal of Structural Engineering, vol. 138, no. 12, pp. 1446–1454, 2012, doi:10.1061/(ASCE)ST.1943-541X.0000585.
J.V. Bhilawe and L.M. Gupta, Experimental investigation of steel equal angle subjected to compression, Engineering Structures and Technologies, vol. 7, no. 2, pp. 55–66, 2015, doi:10.3846/2029882X.2015.1113892.
L.N. Dissanayake, J. Yang, F. Walport, and L. Gardner, Residual stress model for hot-rolled steel I-sections, Eng. Struct., vol. 366, p. 123378, Nov. 2026, doi:10.1016/J.ENGSTRUCT.2026.123378.
A. Skiadopoulos, A. de C. e Sousa, and D.G. Lignos, Experiments and proposed model for residual stresses in hot-rolled wide flange shapes, J. Constr. Steel Res., vol. 210, p. 108069, 2023.
S. Antonodimitraki, M.-Z. Bezas, J. Maesschalck, O. Anwaar, I. Vayas, and J.-F. Demonceau, Effect of Joints on the Buckling Resistance of Angle Members Made of S460 Steel – Experimental Investigations, Jun. 2024, The Swedish Institute of Steel Construction. doi:10.5281/zenodo.12384699.
CEN, EN1990: Eurocode - basis of structural and geotechnical design, Brussels, 2023.
T. Tankova, L. Simões Da Silva, L. Marques, C. Rebelo, and A. Taras, Towards a standardized procedure for the safety assessment of stability design rules, J. Constr. Steel Res., vol. 103, pp. 290–302, Dec. 2014, doi:10.1016/J.JCSR.2014.09.010.
E. Halliwell, Putting the net-zero hierarchy into practice: Build clever, The Structural Engineer: journal of the Institution of Structural Engineer, vol. 102, no. 3, pp. 10–11, 2024.
The Institution of Structural Engineers (IStructE), The hierarchy of net zero design. Accessed: Aug. 23, 2024. [Online]. Available: https://www.istructe.org/resources/blog/the-hierarchy-of-net-zero-design/.
