A lab-scale manufacturing system environment to investigate data-driven production control approaches

Analysis of manufacturing systems; Data-driven control; Physical models; Simulation; Data-driven methods; Optimal threshold; Partial information; Physical systems; Production process; Threshold policies; Work-in-progress inventories; Software; Control and Systems Engineering; Hardware and Architecture; Industrial and Manufacturing Engineering

Abstract :

[en] Controlling production and release of material into a manufacturing system effectively can lower work-in-progress inventory and cycle time while ensuring the desired throughput. With the extensive data collected from manufacturing systems, developing an effective real-time control policy helps achieving this goal. Validating new control methods using the real manufacturing systems may not be possible before implementation. Similarly, using simulation models can result in overlooking critical aspects of the performance of a new control method. In order to overcome these shortcomings, using a lab-scale physical model of a given manufacturing system can be beneficial. We discuss the construction and the usage of a lab-scale physical model to investigate the implementation of a data-driven production control policy in a production/inventory system. As a data-driven production control policy, the marking-dependent threshold policy is used. This policy leverages the partial information gathered from the demand and production processes by using joint simulation and optimization to determine the optimal thresholds. We illustrate the construction of the lab-scale model by using LEGO Technic parts and controlling the model with the marking-dependent policy with the data collected from the system. By collecting data directly from the lab-scale production/inventory system, we show how and why the analytical modeling of the system can be erroneous in predicting the dynamics of the system and how it can be improved. These errors affect optimization of the system using these models adversely. In comparison, the data-driven method presented in this study is considerably less prone to be affected by the differences between the physical system and its analytical representation. These experiments show that using a lab-scale manufacturing system environment is very useful to investigate different data-driven control policies before their implementation and the marking-dependent threshold policy is an effective data-driven policy to optimize material flow in manufacturing systems.

Disciplines :

Production, distribution & supply chain management

Author, co-author :

Khayyati, Siamak ; Université de Liège - ULiège > HEC Liège Research > HEC Liège Research: Business Analytics & Supply Chain Mgmt ; College of Engineering, Koç University, Turkey

Tan, Barış ; College of Engineering, Koç University, Turkey ; College of Administrative Sciences and Economics, Koç University, Turkey

Language :

English

Title :

A lab-scale manufacturing system environment to investigate data-driven production control approaches

Publication date :

July 2021

Journal title :

Journal of Manufacturing Systems

ISSN :

0278-6125

eISSN :

1878-6642

Publisher :

Elsevier B.V.

Volume :

Pages :

283 - 297

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

https://api.elsevier.com/content/article/PII:S0278612521001266?httpAccept=text/xml

Funders :

TÜBİTAK - Scientific and Technological Research Council of Turkey

Available on ORBi :

since 13 January 2026

Statistics

Number of views

8 (0 by ULiège)

Number of downloads

1 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

OpenAlex citations

Bibliography

Negri, E., Fumagalli, L., Macchi, M., A review of the roles of digital twin in CPS-based production systems. Proc Manuf 11 (2017), 939–948.
Glatt, M., Sinnwell, C., Yi, L., Donohoe, S., Ravani, B., Aurich, J.C., Modeling and implementation of a digital twin of material flows based on physics simulation. J Manuf Syst 58 (2021), 231–245.
Attridge, A., Williams, M.A., Tennant, C., The role of physical modelling in the design verification stage of the automotive NPI process in the premium sector. Int J Autom Technol Manag 7:1 (2007), 32–54.
Pignataro, M.A., Lobaccaro, G., Zani, G., Digital and physical models for the validation of sustainable design strategies. Autom Constr 39 (2014), 1–14.
Yu, K., Budhiraja, A.K., Buebel, S., Tokekar, P., Algorithms and experiments on routing of unmanned aerial vehicles with mobile recharging stations. J Field Robot 36:3 (2019), 602–616.
Uhlemann, T.H.-J., Lehmann, C., Steinhilper, R., The digital twin: realizing the cyber-physical production system for Industry 4.0. Proc CIRP 61 (2017), 335–340.
Haag, S., Anderl, R., Digital twin-proof of concept. Manuf Lett 15 (2018), 64–66.
Autiosalo, J., Ala-Laurinaho, R., Mattila, J., Valtonen, M., Peltoranta, V., Tammi, K., Towards integrated digital twins for industrial products: case study on an overhead crane. Appl Sci, 11(2), 2021, 683.
Liu, M., Fang, S., Dong, H., Xu, C., Review of digital twin about concepts, technologies, and industrial applications. J Manuf Syst, 2020.
Ivanov, D., Tang, C.S., Dolgui, A., Battini, D., Das, A., Researchers’ perspectives on Industry 4.0: multi-disciplinary analysis and opportunities for operations management. Int J Prod Res 59:7 (2021), 2055–2078.
Tao, F., Qi, Q., Liu, A., Kusiak, A., Data-driven smart manufacturing. J Manuf Syst 48 (2018), 157–169.
Lee, D.-H., Yang, J.-K., Lee, C.-H., Kim, K.-J., A data-driven approach to selection of critical process steps in the semiconductor manufacturing process considering missing and imbalanced data. J Manuf Syst 52 (2019), 146–156.
Li, L., A systematic-theoretic analysis of data-driven throughput bottleneck detection of production systems. J Manuf Syst 47 (2018), 43–52.
Khayyati, S., Tan, B., Data-driven control of a production system by using marking-dependent threshold policy. Int J Prod Econ, 226, 2019, 107607.
Akcay, A., Biller, B., Tayur, S., Improved inventory targets in the presence of limited historical demand data. Manuf Serv Oper Manag 13:3 (2011), 297–309.
Hou, Z.-S., Wang, Z., From model-based control to data-driven control: survey, classification and perspective. Inf Sci 235 (2013), 3–35.
Sobel, M.J., The optimality of full service policies. Oper Res 30:4 (1982), 636–649.
Paraschos, P.D., Koulinas, G.K., Koulouriotis, D.E., Reinforcement learning for combined production-maintenance and quality control of a manufacturing system with deterioration failures. J Manuf Syst 56 (2020), 470–483.
Polotski, V., Kenne, J.-P., Gharbi, A., Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information. J Manuf Syst 56 (2020), 558–572.
Bayraktar, E., Ludkovski, M., Inventory management with partially observed nonstationary demand. Ann Oper Res 176:1 (2010), 7–39.
Arifoğlu, K., Özekici, S., Inventory management with random supply and imperfect information: a hidden Markov model. Int J Prod Econ 134:1 (2011), 123–137.
Khayyati, S., Tan, B., A machine learning approach for implementing data-driven production control policies. Int J Prod Res, 2021, 1–22.
Jang, Y.J., Yosephine, V.S., LEGO robotics based project for industrial engineering education. Int J Eng Educ 32:3 (2016), 1268–1278.
Syberfeldt, A., A LEGO factory for teaching simulation-based production optimization. Industrial simulation conference, ISC’2010, Budapest, Hungary. EUROSIS-ETI, 2010, 89–94.
Lugaresi, G., Lin, Z., Frigerio, N., Zhang, M., Matta, A., Active learning experience in simulation class using a LEGO based manufacturing system. 2019 winter simulation conference. 2019 Winter Simulation Conference, 2019.
Sanchez, A., Bucio, J., Improving the teaching of discrete-event control systems using a LEGO manufacturing prototype. IEEE Trans Educ 55:3 (2011), 326–331.
Travaglini, D., Manufacturing system based on LEGO-robotics: development of physical and digital models. Master's thesis. 2018, Politecnico Milano, Milan, Italy.
Lugaresi, G., Travaglini, D., Matta, A., A LEGO manufacturing system as demonstrator for a real-time simulation proof of concept. 2019 winter simulation conference. 2019 winter simulation conference, 2019.
Lugaresi, G., Alba, V.V., Matta, A., Lab-scale models of manufacturing systems for testing real-time simulation and production control technologies. J Manuf Syst 58 (2020), 93–108.
Lugaresi, G., Matta, A., Automated manufacturing system discovery and digital twin generation. J Manuf Syst 59 (2021), 51–66.
Song, J.-S., Zipkin, P., Inventory control in a fluctuating demand environment. Oper Res 41:2 (1993), 351–370.
Caldentey, R.A., Analyzing the Make-to-Stock queue in the supply chain and eBusiness Settings. PhD thesis. 2001, Massachusetts Institute of Technology.