Buckling Strength of Rolled Angles: Comparison between International Codes

Farhoud, Hamdy; Bezas, Marios-Zois; Demonceau, Jean-François; Jaspart, Jean-Pierre; Vayas, Ioannis

doi:10.1061/jsendh.steng-12984

Request a copy

Article (Scientific journals)

Buckling Strength of Rolled Angles: Comparison between International Codes

Farhoud, Hamdy; Bezas, Marios-Zois; Demonceau, Jean-François et al.

2024 • In Journal of Structural Engineering, 150 (9)

Editorial Reviewed verified by ORBi

Permalink
https://hdl.handle.net/2268/320551

DOI
10.1061/jsendh.steng-12984

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

farhoud-et-al-2024-buckling-strength-of-rolled-angles-comparison-between-international-codes.pdf

Publisher postprint (2.2 MB)

Request a copy

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Equal-leg angles; bucklin; Eurocode 3; AISC; stability of members; numerical simulations

Abstract :

[en] Angle profiles belong to the most common steel profiles used in several types of civil engineering structures, such as in lattice towers. Although, in such towers, they are usually considered as axially loaded (truss) members, an additional bending moment develops due to the eccentricity between the point of load application and the gravity center of the profile. Therefore, this paper focuses on the buckling resistance of single-angle members subjected to combined compression and bending. The investigations have been performed through numerical parametrical studies and have been compared to different normative documents where interaction equations are provided.

Disciplines :

Civil engineering

Author, co-author :

Farhoud, Hamdy ; Ph.D. Student, Dept. of Civil and Environmental Engineering, Henry M. Rowan College of Engineering, Rowan Univ., Glassboro, NJ 08028 (corresponding author). ORCID: .

Bezas, Marios-Zois ; Université de Liège - ULiège > Urban and Environmental Engineering

Demonceau, Jean-François ; Université de Liège - ULiège > Urban and Environmental Engineering

Jaspart, Jean-Pierre ; Université de Liège - ULiège > Département ArGEnCo > Adéquation des structures de génie civil aux exigences de fontionnement et de performances technico-économiques

Vayas, Ioannis ; Emeritus Professor, School of Civil Engineering, Institute of Steel Structures, National Technical Univ. of Athens, Athens 15772, Greece. ORCID: .

Language :

English

Title :

Buckling Strength of Rolled Angles: Comparison between International Codes

Publication date :

September 2024

Journal title :

Journal of Structural Engineering

ISSN :

0733-9445

eISSN :

1943-541X

Publisher :

American Society of Civil Engineers (ASCE)

Volume :

150

Issue :

Peer reviewed :

Editorial Reviewed verified by ORBi

Additional URL :

https://ascelibrary.org/doi/pdf/10.1061/JSENDH.STENG-12984

Available on ORBi :

since 11 July 2024

Statistics

Number of views

35 (2 by ULiège)

Number of downloads

1 (0 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenAlex citations

Bibliography

ANSI/AISC (American Institute of Steel Construction). 2022. Specification for structural steel buildings. ANSI/AISC 360-22. Chicago: ANSI.
Ban, H. Y., G. Shi, Y. J. Shi, and, Y. Q. Wang. 2013. " Column buckling tests of 420MPa high strength steel single equal angles." Int. J. Struct. Stab. Dyn. 13 (2): 1250069. https://doi.org/10.1142/S0219455412500691.
Behzadi-Sofiani, B., L. Gardner, and, M. A. Wadee. 2021. " Stability and design of fixed-ended stainless steel equal-leg angle section compression members." Eng. Struct. 249 (Dec): 113281. https://doi.org/10.1016/j.engstruct.2021.113281.
Bezas, M.-Z. 2022. " Design of lattice towers from hot-rolled equal leg steel angles." Ph.D. thesis, Dept. of Urban and Environmental Engineering, Univ. of Liège and National Technical Univ. of Athens.
Bezas, M.-Z., J. F. Demonceau, I. Vayas, and, J.-P. Jaspart. 2021 a. " Classification and cross-section resistance of equal-leg rolled angle profiles." J. Constr. Steel Res. 185 (Aug): 106842. https://doi.org/10.1016/j.jcsr.2021.106842.
Bezas, M.-Z., J. F. Demonceau, I. Vayas, and, J.-P. Jaspart. 2021 b. " Experimental and numerical investigations on large angle high strength steel columns." Thin-Walled Struct. 159 (Feb): 107287. https://doi.org/https://doi.org/10.1016/j.tws.2020.107287.
Bezas, M.-Z., J. F. Demonceau, I. Vayas, and, J.-P. Jaspart. 2022. " Design rules for equal-leg angle members subjected to compression and bending." J. Constr. Steel Res. 189 (Feb): 107092. https://doi.org/https://doi.org/10.1016/j.jcsr.2021.107092.
BS (British Standard). 2008. Execution of steel structures and aluminium structures-Part 2. BS EN 1090-2. London: BS.
CEN (Comité Européen de Normalisation). 1994. Structural steel equal and unequal leg angles-Part 2. Tolerances on shapes and dimensions. EN 10056-2. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2005. Design of steel structures-Part 1-1.2005. General rules and rules for buildings. EN 1993-1-1. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2006 a. Design of steel structures-Part 1-5. Plated structures elements. EN 1993-1-5. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2006 b. Design of steel structures-Part 3.2006. Towers, Masts and Chimneys. Tower and masts. EN 1993-3-1. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2006 c. Eurocode 3: Design of steel structures-Part 1-3.2006. General rules-Supplementary rules for cold-formed members and sheeting. EN 1993-1-3. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2012. Overhead electrical lines exceeding Ac 1 kV-Part 1: General requirements-Common specifications. EN 50341-1 2012. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2020. Eurocode 3: Design of steel structures-Part 1-3. General rules-Supplementary rules for cold-formed members and sheeting. prEN 1993-1-3. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2021. Design of steel structures-Part 3.2021. Towers, masts and chimneys. prEN 1993-3. Brussels, Belgium: CEN.
CEN (Comité Européen de Normalisation). 2022. Design of steel structures-Part 1-14.2018. Design assisted by finite element analysis. FprEN1993-1-1. Brussels, Belgium: CEN.
De Menezes, A. A., D. S. Vellasco, P. C. G. De Lima, and, A. T. Da Silva. 2019. " Experimental and numerical investigation of austenitic stainless steel hot-rolled angles under compression." J. Constr. Steel Res. 152 (Apr): 42-56. https://doi.org/https://doi.org/10.1016/j.jcsr.2018.05.033.
Dinis, P. B., D. Camotim, and, A. Landesmann. 2019. " Design of simply supported hot-rolled steel short-to-intermediate angle columns." Steel Constr. 12 (4): 278-290. https://doi.org/https://doi.org/10.1002/stco.201900029.
ECCS (European Convention for Constructional Steelwork). 1976. Manual on stability of steel structures. Brussels, Belgium: ECCS.
Farhoud, H. 2022. " Design of members from class 1 to 4 equal leg angles according to the provisions of EN1993-1-3 and EN1993-3, Annex F." Master's thesis, Analysis and Design of Earthquake Resistant Structures, National Technical Univ. of Athens.
Fisher, J. M. 2000. Load and resistance factor design specification for single-angle members. Chicago: American Institute of Steel Construction.
Kettler, M., and, H. Unterweger. 2019. " Laboratory tests on bolted steel angles in compression with varying end support conditions." [In German.] Stahlbau 88 (5): 447-459. https://doi.org/https://doi.org/10.1002/stab.201900013.
Liang, Y., V. V. K. Jeyapragasam, L. Zhang, and, O. Zhao. 2019. " Flexural-torsional buckling behaviour of fixed-ended hot-rolled austenitic stainless steel equal-leg angle section columns." J. Constr. Steel Res. 154 (Mar): 43-54. https://doi.org/https://doi.org/10.1016/j.jcsr.2018.11.019.
Moze, P., L.-G. Cajot, F. Sinur, K. Rejec, and, D. Beg. 2014. " Residual stress distribution of large steel equal leg angles." Eng. Struct. 71 (Jul): 35-47. https://doi.org/10.1016/j.engstruct.2014.03.040.
Shi, G., Z. Liu, H. Ban, Y. Zhang, Y. Shi, and, Y. Wang. 2012. " Tests and finite element analysis on the local buckling of 420 MPa steel equal angle columns under axial compression." Steel Compos. Struct. 12 (1): 31-51. https://doi.org/10.12989/scs.2012.12.1.031.
Shifferaw, Y., and, B. W. Schafer. 2014. " Cold-formed steel lipped and plain angle columns with fixed ends." Thin-Walled Struct. 80 (Jul): 142-152. https://doi.org/10.1016/j.tws.2014.03.001.
Spiliopoulos, A., M. E. Dasiou, P. Thanopoulos, and, I. Vayas. 2018. " Experimental tests on members made from rolled angle sections." Steel Constr. Des. Res. 11 (1): 84-93. https://doi.org/10.1002/stco.201710023.
Vayas, I., A. Charalampakis, and, V. Koumousis. 2009. " Inelastic resistance of angle sections subjected to biaxial bending and normal forces." Steel Constr. Des. Res. 2 (2): 138-146. https://doi.org/10.1002/stco.200910018.
Vayas, I., J. P. Jaspart, A. Bureau, M. Tibolt, S. Reygner, and, M. Papavasiliou. 2021. " Telecommunication and transmission lattice towers from angle sections-The ANGELHY project." ce/papers 4 (2-4): 210-217. https://doi.org/10.1002/cepa.1283.