Paper published in a book (Scientific congresses and symposiums)
Quantification of geometric variability effects through a viscous through-flow model: sensitivity analysis of the manufacturing tolerance effects on performance of modern axial-flow compressor blades
Budo, Arnaud ; Université de Liège - ULiège > Aérospatiale et Mécanique (A&M)
Hillewaert, Koen ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Design of Turbomachines
Arnst, Maarten ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Computational and stochastic modeling
Le Men, Thibault; Safran Aero Boosters
Terrapon, Vincent ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Modélisation et contrôle des écoulements turbulents
Language :
English
Title :
Quantification of geometric variability effects through a viscous through-flow model: sensitivity analysis of the manufacturing tolerance effects on performance of modern axial-flow compressor blades
Dow, E. A., and Wang, Q., 2015. “The Implications of Tolerance Optimization on Compressor Blade Design”. Journal of Turbomachinery, 137(10), 10. 101008.
Bestle, D., and Flassig, P., 2010. “Optimal aerodynamic compressor blade design considering manufacturing noise”. In proceeding of the ISSMO conference.
Garzon, V. E., and Darmofal, D. L., 2003. “Impact of Geometric Variability on Axial Compressor Performance”. Journal of Turbomachinery, 125(4), 12, pp. 692-703.
Nigro, R., 2018. “Uncertainty Quantification for Robust Design of Axial Compressors”. PhD thesis.
Goodhand, M. N., Miller, R. J., and Lung, H. W., 2014. “The Impact of Geometric Variation on Compressor Two-Dimensional Incidence Range”. Journal of Turbomachinery, 137(2), 09. 021007.
Lange, A., Voigt, M., Vogeler, K., Johann, E., Royce, R., Kg, C., and Dahlewitz, D., 2012. “Principal component analysis on 3D scanned compressor blades for probabilistic CFD simulation”. In Proceedings of the AIIA Conference, no. 1762, pp. 1-16.
Simon, J.-F., 2007. “Contribution to throughflow modelling for axial flow turbomachines”. PhD thesis.
Adamczyk, J. J., 1984. Model equation for simulating flows in multistage turbomachinery. Tech. Rep. NASA 86869.
Budo, A., Terrapon, V. E., Arnst, M., Hillewaert, K., Mouriaux, S., Rodriguez, B., and Bartholet, J., 2021. “Application of a viscous through-flow model to a modern axial low-pressure compressor”. Vol. 2A: Turbomachinery - Axial Flow Fan and Compressor Aerodynamics of Turbo Expo: Power for Land, Sea, and Air.
Smith, B. R., 1994. “A Near Wall Model for The k-l Two Equation Turbulence Model”. AIIA(2386), pp. 1-8.
Baralon, S., Erikson, L.-E., and Hall, U., 1998. “Validation of a throughflow time-marching finite-volume solver for transonic compressors”. In Proceedings of the ASME Turbo Expo.
Pacciani, R., Rubechini, F., Marconcini, M., Arnone, A., Cecchi, S., and Daccà, F., 2016. “A CFD-based throughflow method with an explicit body force model and an adaptive formulation for the S2 streamsurface”. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230(1), pp. 16-28.
Lieblein, S., 1960. “Incidence and Deviation-Angle Correlations for Compressor Cascades”. ASME Journal of Turbomachinery, 82(3), pp. 575-584.
Aungier, R. H., 2003. Axial-Flow Compressors.
Carter, A., 1950. The Low Speed Performance Of Related Aerofoils In Cascades.
Johnsen, I., and Bullock, R., 1965. Aerodynamic Design of Axial-Flow Compressors. Tech. Rep. NASA SP-36.
Pollard, D., and Gostelow, J. P., 1967. “Some Experiments at Low Speed on Compressor Cascades”. Journal of Engineering for Gas Turbines and Power, 89(3), pp. 427-436.
Jameson, A., Schmidt, W., and Turkel, E., 1981. “Numerical solution of the euler equations by finite volume methods using runge kutta time stepping schemes”. In 14th Fluid and Plasma Dynamics Conference.
Gourdain, N., 2015. “Prediction of the unsteady turbulent flow in an axial compressor stage. part 1: Comparison of unsteady rans and les with experiments”. Computers & Fluids, 106, pp. 119-129.
König, W. M., Hennecke, D. K., and Fottner, L., 1994. “Improved Blade Profile Loss And Deviation Angle Models For Advanced Transonic Compressor Bladings: Part I - A Model For Subsonic Flow”. ASME Journal of Turbomachinery, 118(1), pp. 73-80.
Budo, A., Terrapon, V. E., Hillewaert, K., and Bartholet, J., 2023. “Assessment of geometrical variability effects through a viscous through-flow model applied to modern axial-flow compressor blades”. In Proceedings of 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, no. 307, pp. 1-12.
Cao, T., Hield, P., and Tucker, P. G., 2017. “Hierarchical immersed boundary method with smeared geometry”. Journal of Propulsion and Power, 33(5), pp. 1151-1163.
