Adamczyk, J. J. (1984), Model equation for simulating flows in multistage turbomachinery.
Aungier, R. H. (2003), Axial-Flow Compressors.
Baralon, S., Erikson, L.-E. & Hall, U. (1998), Validation of a throughflow time-marching finite-volume solver for transonic compressors, in 'Proceedings of the ASME Turbo Expo'.
Budo, A., Terrapon, V. E., Arnst, M., Hillewaert, K., Mouriaux, S., Rodriguez, B. & Bartholet, J. (2021), Application of a viscous through-flow model to a modern axial low-pressure compressor, Vol. 2A: Turbomachinery - Axial Flow Fan and Compressor Aerodynamics of Turbo Expo: Power for Land, Sea, and Air.
Carter, A. (1950), The Low Speed Performance Of Related Aerofoils In Cascades.
Föllner, S., Amedick, V., Bonhoff, B., Brillert, D. & Benra, F.-K. (2020), Model validation of an euler-based 2D-throughflow approach for multistage axial turbine analysis, in 'Proceedings of the ASME Turbo Expo', Vol. 29, pp. 185-186.
Jameson, A., Schmidt, W. & Turkel, E. (1981), Numerical solution of the euler equations by finite volume methods using runge kutta time stepping schemes, in '14th Fluid and Plasma Dynamics Conference'.
Jian, L., Dongrun, W., Jinfang, T., Mingmin, Z. & Xiaoqing, Q. (2020), The effects of incidence and deviation on the CFD-based throughflow analysis, in 'Proceedings of the ASME Turbo Expo', number 14293, pp. 1-9.
Johnsen, I. & Bullock, R. (1965), Aerodynamic Design of Axial-Flow Compressors, number SP-36.
Kónig, W. M., Hennecke, D. K. & Fottner, L. (1994), 'Improved Blade Profile Loss And Deviation Angle Models For Advanced Transonic Compressor Bladings: Part I - A Model For Subsonic Flow', ASME Journal of Turbomachinery 118(1), 73-80.
Lange, A., Vogeler, K., Gümmer, V., Schrapp, H. & Clemen, C. (2009), Introduction of a parameter based compressor blade model for considering measured geometry uncertainties in numerical simulation, in 'ASME Journal of Turbomachinery', number 59937, pp. 1-11.
Lange, A., Voigt, M., Vogeler, K., Johann, E., Royce, R., Kg, C. & Dahlewitz, D. (2012), Principal component analysis on 3D scanned compressor blades for probabilistic CFD simulation, in 'Proceedings of the AIIA Conference', number 1762, pp. 1-16.
Lieblein, S. (1960), 'Incidence and Deviation-Angle Correlations for Compressor Cascades', ASME Journal of Turbomachinery 82(3), 575-584.
Nigro, R. (2018), Uncertainty Quantification for Robust Design of Axial Compressors, PhD thesis.
Pacciani, R., Rubechini, F., Marconcini, M., Arnone, A., Cecchi, S. & Daccà, F. (2016), 'A CFD-based throughflow method with an explicit body force model and an adaptive formulation for the S2 streamsurface', Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 230(1), 16-28.
Pollard, D. & Gostelow, J. P. (1967), 'Some Experiments at Low Speed on Compressor Cascades', Journal of Engineering for Gas Turbines and Power 89(3), 427-436.
Righi, M., Pachidis, V., Könözsy, L. & Pawsey, L. (2018), 'Three-dimensional through-flow modelling of axial flow compressor rotating stall and surge', Aerospace Science and Technology 78, 271-279.
Simon, J.-F. (2007), Contribution to Throughflow Modelling for Axial Flow Turbomachines, PhD thesis.
Smith, B. R. (1994), A Near Wall Model for The k-l Two Equation Turbulence Model, in 'Proceedings of the AIIA Conference', number 2386, pp. 1-8.
Wu, C.-H. (1952), A general theory of three-dimesional flow in subsonic and supersonic turbomachines of axial-, radial-, and mixed-flow types, Technical report, NACA.
