Kim, B., and Cho, S., “Automated Vision-Based Detection of Cracks on Concrete Surfaces Using a Deep Learning Technique,” Sensors (Basel), V. 18, No. 10, 2018, p. 3452 doi: 10.3390/s18103452
Gillins, D. T.; Parrish, C.; Gillins, M. N.; and Simpson, C., “Eyes in the Sky: Bridge Inspections with Unmanned Aerial Vehicles,” Report No. FHWA-OR-RD-18-11, Federal Highway Administration, Washington, DC, 2018.
Ham, Y.; Han, K. K.; Lin, J. J.; and Golparvar-Fard, M., “Visual Monitoring of Civil Infrastructure Systems via Camera-Equipped Unmanned Aerial Vehicles (UAVs): A Review of Related Works,” Visualization in Engineering, V. 4, No. 1, 2016, p. 1 doi: 10.1186/s40327-015-0029-z
Zaborac, J.; Athanasiou, A.; Salamone, S.; Bayrak, O.; and Hrynyk, T. D., “Crack-Based Shear Strength Assessment of Reinforced Concrete Members Using a Fixed-Crack Continuum Modeling Approach,” Journal of Structural Engineering, ASCE, V. 146, No. 4, 2020, p. 04020024. doi: 10.1061/(ASCE)ST.1943-541X.0002564
Calvi, P. M.; Bentz, E. C.; and Collins, M. P., “Model for Assessment of Cracked Reinforced Concrete Membrane Elements Subjected to Shear and Axial Loads,” ACI Structural Journal, V. 115, No. 2, Mar. 2018, pp. 501-509. doi: 10.14359/51701093
Lantsoght, E. O. L.; van der Veen, C.; Walraven, J. C.; and de Boer, A., “Case Study on Aggregate Interlock Capacity for the Shear Assessment of Cracked Reinforced-Concrete Bridge Cross Sections,” Journal of Bridge Engineering, ASCE, V. 21, No. 5, 2016, p. 04016004. doi: 10.1061/(ASCE) BE.1943-5592.0000847
Mihaylov, B. I.; Bentz, E. C.; and Collins, M. P., “Two-Parameter Kinematic Theory for Shear Behavior of Deep Beams,” ACI Structural Journal, V. 110, No. 3, May-June 2013, pp. 447-455.
Campana, S.; Fernández Ruiz, M.; Anastasi, A.; and Muttoni, A., “Analysis of Shear-Transfer Actions on One-Way RC Members Based on Measured Cracking Pattern and Failure Kinematics,” Magazine of Concrete Research, V. 65, No. 6, 2013, pp. 386-404. doi: 10.1680/macr.12.00142
Cavagnis, F.; Ruiz, M. F.; and Muttoni, A., “An Analysis of the Shear-Transfer Actions in Reinforced Concrete Members without Transverse Reinforcement Based on Refined Experimental Measurements,” Structural Concrete, V. 19, No. 1, 2017, pp. 1-16.
Qambar, M., “Effect of Wide Loading Elements and Shear Span-to-Depth Ratio on the Behavior of Shear Critical Reinforced Concrete Deep Beams,” MSc thesis, North Carolina State University, Raleigh, NC, 2020, 268 pp.
Kupfer, H.; Hilsdorf, H. K.; and Rusch, H., “Behavior of Concrete under Biaxial Stresses,” ACI Journal Proceedings, V. 66, No. 8, Aug. 1969, pp. 656-666.
Li, B.; Maekawa, K.; and Okamura, H., “Contact Density Model for Stress Transfer Across Cracks in Concrete,” Journal of Faculty of Engineering, The University of Tokyo, V. 40, 1989, pp. 9-52.
Walraven, J. C., “Fundamental Analysis of Aggregate Interlock,” Journal of the Structural Division, V. 107, No. 11, 1981, pp. 2245-2270. doi: 10.1061/JSDEAG.0005820
Calvi, P. M.; Bentz, E. C.; and Collins, M. P., “Pure Mechanics Crack Model for Shear Stress Transfer in Cracked Reinforced Concrete,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr. 2017, pp. 545-554. doi: 10.14359/51689460
Langer, M., “Evaluation of the Load-Bearing Mechanisms in Coupling Beams and Shear Walls based on DIC Measurements,” MSc thesis, University of Liège, Liège, Belgium, 2019, 136 pp.
Calvi, P. M.; Bentz, E. C.; and Collins, M. P., “Reversed Cyclic Experiments on Shear Stress Transfer across Cracks in Reinforced Concrete Elements,” ACI Structural Journal, V. 113, No. 4, July-Aug. 2016, pp. 851-859. doi: 10.14359/51688926
Proestos, G. T.; Palipana, D. K.; and Mihaylov, B. I., “Evaluating the Shear Resistance of Deep Beams Loaded or Supported by Wide Elements,” Engineering Structures, V. 226, 2021, p. 111368. doi: 10.1016/j. engstruct.2020.111368
CSA A23.3:19, “Design of Concrete Structures,” Canadian Standards Association, Mississauga, ON, Canada, 2019, 295 pp.
ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19),” American Concrete Institute, Farmington Hills, MI, 2019, 623 pp.
