[en] Overheating exposure over time can lead to discomfort, productivity reduction, and health issues for the occupants in buildings. The time-integrated overheating evaluation methods are introduced to describe, in a synthetic way, the extent of overheating over a span of time and predict the uncomfortable phenomena. This paper reviews the time-integrated overheating evaluation methods that are applicable to residential buildings in temperate climates of Europe. We critically analyze the methods found in (i) 11 international standards, namely, EN 15251 (2006), EN 16798 (2019), ISO 7730 (2004), ISO 17772 (2017–2018), ASHRAE 55 (2017), ASHRAE 55 (2020), CIBSE Guide A (2006), CIBSE TM52 (2013), CIBSE Guide A (2015), CIBSE TM59 (2017), and Passive House (2015), (ii) five national building codes based on the Energy Performance of Building Directive (EPBD) in Belgium, France, Germany, the UK, and the Netherlands, and (iii) two studies in the scientific literature. For each method, we present the thermal comfort models along with the time-integrated overheating indices and criteria. The methods are analyzed according to some key measures in order to identify their scope, strength, and limitations. We found that most standards recommend the static comfort models for air-conditioned buildings and the adaptive comfort models for non-air-conditioned ones. We also found a promising method based on three indices, namely, Indoor Overheating Degree (IOD), Ambient Warmness Degree (AWD), and overheating escalation factor (aIOD=AWD) that allows for a multi-zonal and climate change-sensitive overheating assessment. Finally, some guidance is provided for practice and future developments.
Research center :
Sustainable Building Design Lab
Disciplines :
Energy
Author, co-author :
Rahif, Ramin ; Université de Liège - ULiège > Département ArGEnCo > Techniques de construction des bâtiments
Amaripadath, Deepak ; Université de Liège - ULiège > Département ArGEnCo > Techniques de construction des bâtiments
Attia, Shady ; Université de Liège - ULiège > Département ArGEnCo > Techniques de construction des bâtiments
Language :
English
Title :
Review on Time-Integrated Overheating Evaluation Methods for Residential Buildings in Temperate Climates of Europe
Publication date :
01 December 2021
Journal title :
Energy and Buildings
ISSN :
0378-7788
eISSN :
1872-6178
Publisher :
Elsevier, Amsterdam, Netherlands
Volume :
252C
Pages :
111463
Peer reviewed :
Peer Reviewed verified by ORBi
Name of the research project :
[OCCuPANt] Impacts of climate change on buildings in Belgium during summer
J. Garssen, C. Harmsen, J. De Beer. The effect of the summer 2003 heat wave on mortality in the Netherlands, Eurosurveillance 10(7) 2005 13SP 557-14, 10.2807/esm.10.07.00557-en.
M. Perry, N. Golding. Range of environmental temperature conditions in the United Kingdom, Met Office, Department of Transport, Exeter, UK, 2011. [Online]. Available: https://www.onr.org.uk/transport/temperature-range-report.pdf.
Pirard, P., et al. Summary of the mortality impact assessment of the 2003 heat wave in France. Eurosurveillance 10:7 (2005), 7–8.
Fink, A.H., Brücher, T., Krüger, A., Leckebusch, G.C., Pinto, J.G., Ulbrich, U., The 2003 European summer heatwaves and drought–synoptic diagnosis and impacts. Weather 59:8 (2004), 209–216.
Johansen, B.E., The encyclopedia of global warming science and technology. 2009, ABC-CLIO, Santa Barbara, California.
Santamouris, M., Innovating to zero the building sector in Europe: Minimising the energy consumption, eradication of the energy poverty and mitigating the local climate change. Sol. Energy 128 (2016), 61–94, 10.1016/j.solener.2016.01.021.
Santamouris, M., et al. Urban heat island and overheating characteristics in Sydney, Australia. An analysis of multiyear measurements. Sustainability, 9(5), 2017, 712, 10.3390/su9050712.
T. Oke. The heat island of the urban boundary layer: characteristics, causes and effects, in Wind climate in cities, Springer, 1995, pp. 81–107.
Oleson, K., Contrasts between urban and rural climate in CCSM4 CMIP5 climate change scenarios. J. Clim. 25:5 (2012), 1390–1412, 10.1175/JCLI-D-11-00098.1.
Nguyen, A.-T., Reiter, S., Rigo, P., A review on simulation-based optimization methods applied to building performance analysis. Appl. Energy 113 (2014), 1043–1058, 10.1016/j.apenergy.2013.08.061Get rights and content.
Oikonomou, E., Davies, M., Mavrogianni, A., Biddulph, P., Wilkinson, P., Kolokotroni, M., Modelling the relative importance of the urban heat island and the thermal quality of dwellings for overheating in London. Build. Environ. 57 (2012), 223–238, 10.1016/j.buildenv.2012.04.002.
Mavrogianni, A., Pathan, A., Oikonomou, E., Biddulph, P., Symonds, P., Davies, M., Inhabitant actions and summer overheating risk in London dwellings. Build. Res. Inf., 45(1–2), 2017, 10.1080/09613218.2016.1208431.
Psomas, T., Heiselberg, P., Duer, K., Bjørn, E., Overheating risk barriers to energy renovations of single family houses: multicriteria analysis and assessment. Energy Build. 117 (2016), 138–148, 10.1016/j.enbuild.2016.02.031.
Hamdy, M., Carlucci, S., Hoes, P.-J., Hensen, J.L.M., The impact of climate change on the overheating risk in dwellings—A Dutch case study. Build. Environ. 122 (Sep. 2017), 307–323, 10.1016/j.buildenv.2017.06.031.
P. Symonds et al., Overheating in English dwellings: comparing modelled and monitored large-scale datasets, Build. Res. Inf., 45(1–2) 2016 10.1080/09613218.2016.1224675.
Lan, L., Tsuzuki, K., Liu, Y., Lian, Z., Thermal environment and sleep quality: a review. Energy Build. 149 (2017), 101–113, 10.1016/j.enbuild.2017.05.043Get.
Hooyberghs, H., Verbeke, S., Lauwaet, D., Costa, H., Floater, G., De Ridder, K., Influence of climate change on summer cooling costs and heat stress in urban office buildings. Clim. Change 144:4 (2017), 721–735, 10.1007/s10584-017-2058-1.
HHSRS, “HHSRS Guidance for Landlords and Property-Related Professionals,” London, UK, 2006. [Online]. Available: https://www.gov.uk/government/publications/ housing-health-and-safety-rating-system-guidance-for-landlords-and-property-related-professionals.
Brücker, G., Vulnerable populations: lessons learnt from the summer 2003 heat waves in Europe. Eurosurveillance 10:7 (2005), 1–2, 10.2807/esm.10.07.00551-en.
Fouillet, A., et al. Excess mortality related to the August 2003 heat wave in France. Int. Arch. Occup. Environ. Health 80:1 (2006), 16–24, 10.1007/s00420-006-0089-4.
Johnson, H., Kovats, S., McGregor, G., Stedman, J., Gibbs, M., Walton, H., The impact of the 2003 heat wave on daily mortality in England and Wales and the use of rapid weekly mortality estimates. Eurosurveillance 10:7 (2005), 15–16, 10.2807/esm.10.07.00558-en.
J.-M. Robine, S. L. Cheung, S. Le Roy, H. Van Oyen, F. R. Herrmann. Report on excess mortality in Europe during summer 2003, EU Community Action Programme Public Health Grant Agreem. 2005114 2007 28.
J.-M. Robine et al., Death toll exceeded 70,000 in Europe during the summer of 2003, C. R. Biol., 331(2) 2008 10.1016/j.crvi.2007.12.001.
Enescu, D., A review of thermal comfort models and indicators for indoor environments. Renew. Sustain. Energy Rev. 79 (Nov. 2017), 1353–1379, 10.1016/j.rser.2017.05.175.
EN 15251, EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. European Committee for Standardization, Brussels, Belgium, 2006.
ISO 7730, ISO 7730: Ergonomics of the Thermal Environment. Analytical Determination and Interpretation of Thermal Comfort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria. International Standards Organization Geneva, 2004.
McLeod, R.S., Swainson, M., Chronic overheating in low carbon urban developments in a temperate climate. Renew. Sustain. Energy Rev. 74 (Jul. 2017), 201–220, 10.1016/j.rser.2016.09.106.
ANSI/ASHRAE Standard 55, Standard 55–2017: Thermal Environmental Conditions for Human Occupancy. American Society of Heating, Refrigerating and Air Conditioning Engineers: Atlanta, GA, USA, 2017.
Carlucci, S., Pagliano, L., A review of indices for the long-term evaluation of the general thermal comfort conditions in buildings. Energy Build. 53 (2012), 194–205, 10.1016/j.enbuild.2012.06.015.
Beshir, M., Ramsey, J.D., Heat stress indices: a review paper. Int. J. Ind. Ergon. 3:2 (1988), 89–102.
Taleghani, M., Tenpierik, M., Kurvers, S., van den Dobbelsteen, A., A review into thermal comfort in buildings. Renew. Sustain. Energy Rev. 26 (2013), 201–215, 10.1016/j.rser.2013.05.050.
D. Khovalyg et al., “Critical review of standards for indoor thermal environment and air quality,” Energy Build. 2020 109819 10.1016/j.enbuild.2020.109819.
Carlucci, S., Bai, L., de Dear, R., Yang, L., Review of adaptive thermal comfort models in built environmental regulatory documents. Build. Environ. 137 (2018), 73–89, 10.1016/j.buildenv.2018.03.053.
Cheng, Y., Niu, J., Gao, N., Thermal comfort models: a review and numerical investigation. Int. Workshop Vent. Comf. Health Transp. Veh. 47 (2012), 13–22, 10.1016/j.buildenv.2011.05.011.
Van Hoof, J., Mazej, M., Hensen, J.L., Thermal comfort: research and practice. Front. Biosci. 15:2 (2010), 765–788, 10.2741/3645.
Halawa, E., van Hoof, J., The adaptive approach to thermal comfort: a critical overview. Energy Build. 51 (2012), 101–110, 10.1016/j.enbuild.2012.04.011.
Yang, L., Yan, H., Lam, J.C., Thermal comfort and building energy consumption implications – A review. Appl. Energy 115 (2014), 164–173, 10.1016/j.apenergy.2013.10.062.
Zhao, Q., Lian, Z., Lai, D., Thermal comfort models and their developments: a review. Energy Built Environ. 2:1 (Jan. 2021), 21–33, 10.1016/j.enbenv.2020.05.007.
Roaf, S., Nicol, F., Humphreys, M., Tuohy, P., Boerstra, A., Twentieth century standards for thermal comfort: promoting high energy buildings. Archit. Sci. Rev. 53:1 (2010), 65–77, 10.3763/asre.2009.0111.
S. Carlucci. Thermal comfort assessment of buildings, Springer, 2013, 10.1007/978-88-470-5238-3.
Zero Carbon Hub, Impacts of Overheating: Evidence Review. 2015, Zero Carbon Hub, London, England.
NHBC. Overheating in new homes: A review of the evidence, National House-Building Council, UK., 2012.
Hendel, M., Azos-Diaz, K., Tremeac, B., Behavioral adaptation to heat-related health risks in cities. Energy Build. 152 (2017), 823–829, 10.1016/j.enbuild.2016.11.063.
European Commission (EC), “Eurostat - Tables, Graphs and Maps Interface (TGM) table,” 2017. Accessed: May 19, 2021. [Online]. Available: https://ec.europa.eu/eurostat/web/main/help/first-visit/tgm.
Kovats, R.S., Hajat, S., Heat stress and public health: a critical review. Annu. Rev. Public Health 29:1 (2008), 41–55, 10.1146/annurev.publhealth.29.020907.090843.
Lomas, K.J., Porritt, S.M., Overheating in buildings: lessons from research. Build. Res. Inf., 2017, 10.1080/09613218.2017.1256136.
Yannas, S., Rodríguez-Álvarez, J., Domestic overheating in a temperate climate: feedback from London Residential Schemes. Sustain. Cities Soc., 59, 2020, 102189, 10.1016/j.scs.2020.102189.
Mavrogianni, A., et al. The impact of occupancy patterns, occupant-controlled ventilation and shading on indoor overheating risk in domestic environments. Build. Environ. 78 (2014), 183–198, 10.1016/j.buildenv.2014.04.008.
T. Psomas, P. Heiselberg, K. Duer, M.M. Andersen. Comparison and statistical analysis of long-term overheating indices applied on energy renovated dwellings in temperate climates, Indoor Built Environ. 27(3) 2018 10.1177/1420326X16683435.
R. Birchmore, K. Davies, P. Etherington, R. Tait, A. Pivac. Overheating in Auckland homes: testing and interventions in full-scale and simulated houses, Build. Res. Inf. 45(1–2) 2016, 10.1080/09613218.2017.1232857.
Elsharkawy, H., Zahiri, S., The significance of occupancy profiles in determining post retrofit indoor thermal comfort, overheating risk and building energy performance. Build. Environ., 172, 2020, 106676, 10.1016/j.buildenv.2020.106676.
Fletcher, M.J., Johnston, D.K., Glew, D.W., Parker, J.M., An empirical evaluation of temporal overheating in an assisted living Passivhaus dwelling in the UK. Build. Environ. 121 (2017), 106–118, 10.1016/j.buildenv.2017.05.024.
Pathan, A., Mavrogianni, A., Summerfield, A., Oreszczyn, T., Davies, M., Monitoring summer indoor overheating in the London housing stock. Energy Build. 141 (2017), 361–378, 10.1016/j.enbuild.2017.02.049.
Mulville, M., Stravoravdis, S., The impact of regulations on overheating risk in dwellings. Build. Res. Inf., 44(5–6), 2016, Aug, 10.1080/09613218.2016.1153355.
W.V. Lee, K. Steemers. Exposure duration in overheating assessments: a retrofit modelling study, Build. Res. Inf. 45(1–2) 2016, 10.1080/09613218.2017.1252614.
L. Rodrigues, V. Sougkakis, M. Gillott. Investigating the potential of adding thermal mass to mitigate overheating in a super-insulated low-energy timber house, Int. J. Low-Carbon Technol. 11(3) 2016 10.1093/ijlct/ctv003.
United Nations (UN), “World Population Prospects - Population Division“,” United Nations. Accessed: May 19, 2021. [Online]. Available: https://population.un.org/wpp/Download/Standard/Population/.
United Nations (UN), “Demographic Yearbook - Table 3: Population by sex, rate of population increase, surface area and density,” United Nations Statistics division, 2014. Accessed: May 19, 2021. [Online]. Available: http://unstats.un.org/unsd/demographic/products/dyb/dyb2012/Table03.pdf.
De Vecchi, R., Sorgato, M.J., Pacheco, M., Cândido, C., Lamberts, R., ASHRAE 55 adaptive model application in hot and humid climates: the Brazilian case. Archit. Sci. Rev. 58:1 (2015), 93–101, 10.1080/00038628.2014.981145.
Yuan, Y., Shim, J., Lee, S., Song, D., Kim, J., Prediction for overheating risk based on deep learning in a zero energy building. Sustainability, 12(21), 2020, 8974, 10.3390/su12218974.
Recast, E., Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast). Off. J. Eur. Union, 18(06), 2010, 2010.
IBGE, “Performance Energétique des Bâtiments: Guide des exigences et des procédures de la réglementation Travaux PEB en Région de Bruxelles Capitale,” Brussels, Belgium, 2017.
Vlaams Energie- en Klimaatagentschap, Bijlage V Bepalingsmethode EPW: BEPALINGSMETHODE VAN HET PEIL VAN PRIMAIR ENERGIEVERBRUIK VAN RESIDENTIËLE EENHEDEN. 2020, Flanders, Belgium.
Gouvernement Wallon, “Méthode PER 2018: MÉTHODE DE DÉTERMINATION DU NIVEAU DE CONSOMMATION D’ÉNERGIE PRIMAIRE DES UNITES RESIDENTIELLES,” Wallonia, Belgium, 2018.
V. Fux, “Thermische Gebäudesimulation zum sommerlichen Wärmeschutz nach DIN 4108-2: 2013,” Hochsch. Für Tech. Stuttg., 2013.
Krone, U., Ascione, F., Bianco, N., Tschirner, T., Böttcher, O., Prescriptive-and performance-based approaches of the present and previous German DIN 4108–2. Hourly energy simulation for comparing the effectiveness of the methods. Energy Procedia 75 (2015), 1315–1324.
Ministère de la transition écologique, “Réglementation environnementale RE2020,” France, 2020.
HM Government, “The Building Regulations 2010: Conservation of fuel and power in new dwellings, Approved Document L1A,” 2013 edition incorporating 2016 amendments, UK.
HM Government, “The Building Regulations 2010: Conservation of fuel and power in existing dwellings, Approved Document L1B,” 2010 edition incorporating 2010, 2011, 2013. 2016, and 2018 amendments, UK.
DCLG, “Housing Standards Review: Summary of Responses,” Department for Communities and Local Government, London, UK, ISBN: 978-1-4098-4178-4, 2014. [Online]. Available: https://www.gov.uk/government/consultations/housing-standards-review-consultation.
HM Government, “The Building Regulations 2010: Conservation of fuel and power in new dwellings, Approved Document L1A,” 2013 edition, UK.
BRE (DECC), “SAP 2012: The Government's Standard Assessment Procedure for Energy Rating of Dwellings,” Watford, UK, 2012.
UK Government, “Approved Document [X] – Overheating.” Jan. 2021. Accessed: Aug. 30, 2021. [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/953752/Draft_guidance_on_heating.pdf.
NTA 8800, NTA 8800: Energieprestatie van gebouwen-Bepalingsmethode. Royal Netherlands Standardization Institute, Delft, Netherlands, 2019.
BRE (DECC), “SAP 2012: The Government's Standard Assessment Procedure for Energy Rating of Dwellings,” Watford, UK, 2012.
I. I. Publicatie, “74; Thermische behaaglijkheid e eisen voor de binnentemperatuur in gebouwen, Stichting ISSO,” Rotterdam Neth., 2004.
van der Linden, A.C., Boerstra, A.C., Raue, A.K., Kurvers, S.R., de Dear, R.J., Adaptive temperature limits: a new guideline in The Netherlands: A new approach for the assessment of building performance with respect to thermal indoor climate. Energy Build. 38:1 (2006), 8–17, 10.1016/j.enbuild.2005.02.008.
Willand, N., Ridley, I., Pears, A., Relationship of thermal performance rating, summer indoor temperatures and cooling energy use in 107 homes in Melbourne, Australia. Energy Build. 113 (2016), 159–168, 10.1016/j.enbuild.2015.12.032.
Nicol, J.F., Raja, I.A., Allaudin, A., Jamy, G.N., Climatic variations in comfortable temperatures: the Pakistan projects. Energy Build. 30:3 (1999), 261–279, 10.1016/S0378-7788(99)00011-0.
Fato, I., Martellotta, F., Chiancarella, C., Thermal comfort in the climatic conditions of Southern Italy. Trans.-Am. Soc. Heat. Refrig. AIR Cond. Eng. 110:2 (2004), 578–593.
De Dear, R.J., Auliciems, A., Validation of the predicted mean vote model of thermal comfort in six Australian field studies. ASHRAE Trans. 91:2 B (1985), 452–468.
Schiller, G.E., A comparison of measured and predicted comfort in office buildings. ASHRAE Trans. 96:1 (1990), 609–622.
Busch, J.F., Thermal responses to the Thai office environment. ASHRAE Trans. 96:1 (1990), 859–872.
Busch, J.F., A tale of two populations: thermal comfort in air-conditioned and naturally ventilated offices in Thailand. Energy Build. 18:3 (1992), 235–249, 10.1016/0378-7788(92)90016-A.
van der Linden, K., Boerstra, A.C., Raue, A.K., Kurvers, S.R., Thermal indoor climate building performance characterized by human comfort response. Energy Build. 34:7 (2002), 737–744, 10.1016/S0378-7788(01)00144-X.
Heidari, S., Sharples, S., A comparative analysis of short-term and long-term thermal comfort surveys in Iran. Energy Build. 34:6 (2002), 607–614, 10.1016/S0378-7788(02)00011-7.
Yamtraipat, N., Khedari, J., Hirunlabh, J., Thermal comfort standards for air conditioned buildings in hot and humid Thailand considering additional factors of acclimatization and education level. Sol. Energy 78:4 (2005), 504–517, 10.1016/j.solener.2004.07.006.
R. De Dear and G. S. Brager, “Developing an adaptive model of thermal comfort and preference,” UC Berkeley Cent. Built Environ., 1998, Accessed: Feb. 03, 2020. [Online]. Available: https://escholarship.org/uc/item/4qq2p9c6.
Andreasi, W.A., Lamberts, R., Cândido, C., Thermal acceptability assessment in buildings located in hot and humid regions in Brazil. Build. Environ. 45:5 (2010), 1225–1232, 10.1016/j.buildenv.2009.11.005.
P. Ole Fanger, J. Toftum. Extension of the PMV model to non-air-conditioned buildings in warm climates, Energy Build. 34(6) 2002 533–536 10.1016/S0378-7788(02)00003-8.
M.A. Humphreys, J. Fergus Nicol. The validity of ISO-PMV for predicting comfort votes in every-day thermal environments, Energy Build. 34(6) 2002 667–684 10.1016/S0378-7788(02)00018-X.
Parkinson, T., de Dear, R., Brager, G., Nudging the adaptive thermal comfort model. Energy Build., 206, 2020, 109559, 10.1016/j.enbuild.2019.109559.
Basu, R., Samet, J.M., Relation between elevated ambient temperature and mortality: a review of the epidemiologic evidence. Epidemiol. Rev. 24:2 (2002), 190–202, 10.1093/epirev/mxf007.
Hughes, B.R., Chaudhry, H.N., Ghani, S.A., A review of sustainable cooling technologies in buildings. Renew. Sustain. Energy Rev. 15:6 (2011), 3112–3120, 10.1016/j.rser.2011.03.032.
Hughes, C., Natarajan, S., Summer thermal comfort and overheating in the elderly. Build. Serv. Eng. Res. Technol. 40:4 (2019), 426–445, 10.1177/0143624419844518.