Article (Scientific journals)
Compression Tests on Large Angle Columns in High Strength Steel
Bezas, Marios-Zois; Demonceau, Jean-François; Vayas, Ioannis et al.
2021In ce/papers, 4 (2-4), p. 1523-1529
Peer reviewed
 

Files


Full Text
2021_Compression Tests on Large Angle Columns in High Strength Steel_ Bezas,Demonceau,Vayas,Jaspart_Ernst&Sohn.pdf
Publisher postprint (1.12 MB)
Request a copy

All documents in ORBi are protected by a user license.

Send to



Details



Keywords :
Angle cross-sections; High strength steel; Buckling
Abstract :
[en] The paper discusses the stability behaviour of large angle columns in high strength steel subjected to compression loads. It presents a number of compression tests on such columns that have been performed at University of Liege with different eccentricities and slenderness and, as a result, different buckling failure modes observed. The experimental campaign is intended to widen the knowledge about the behaviour of high strength steel columns with large angle sections in compression and bending and so to complement previous experimental studies. The tests have been accompanied by numerical analyses and calculations of the load carrying capacities through present Eurocode prescribed methods. The numerical simulations have been carried out by application of the FEM software FINELG using beam elements and considering of relevant imperfections as well as geometrical and material non – linearities. The numerical and analytical results are compared and validated with the corresponding experimental ones and summarized in the present paper. The experimental campaign and the numerical simulations are part of the European-funded RFCS project ANGELHY “Innovative solutions for design and strengthening of telecommunications and transmission lattice towers using large angles from high strength steel and hybrid techniques of angles with FRP strips”.
Disciplines :
Civil engineering
Author, co-author :
Bezas, Marios-Zois  ;  Université de Liège - ULiège > Département ArGEnCo > Adéquat. struct. aux exig. de fonct.& perfor. techn.-écon.
Demonceau, Jean-François  ;  Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Vayas, Ioannis
Jaspart, Jean-Pierre  ;  Université de Liège - ULiège > Département ArGEnCo > Adéquat. struct. aux exig. de fonct.& perfor. techn.-écon.
Language :
English
Title :
Compression Tests on Large Angle Columns in High Strength Steel
Publication date :
01 September 2021
Journal title :
ce/papers
eISSN :
2509-7075
Publisher :
Ernst & Sohn (a Wiley brand), Berlin, Germany
Special issue title :
EUROSTEEL 2021 Sheffield — Steel's coming home
Volume :
4
Issue :
2-4
Pages :
1523-1529
Peer reviewed :
Peer reviewed
Name of the research project :
ANGELHY: Innovative solutions for design and strengthening of telecommunications and transmission lattice towers using large angles from high strength steel and hybrid techniques of angles with FRP strips
Funders :
RFCS - European Commission. Research Fund for Coal and Steel [BE]
Available on ORBi :
since 02 September 2021

Statistics


Number of views
75 (10 by ULiège)
Number of downloads
3 (3 by ULiège)

OpenCitations
 
0

Bibliography


Similar publications



Contact ORBi