Denton, J. D. and Dawes, W. N., 1999. "Computational fluid dynamics for turbomachinery design". Journal of Mechanical Engineering, Vol. 213 (2), pp. 107-124.
Horlock, J. H. and Denton, J. D., 2005. "A review of some early design practice using computational fluid dynamics and a current perspective". Journal of Turbomachinery, ASME 127(1), pp. 5-13.
Pinto, R., Afzal, A., D'Souza, L., and Ansari, Z. and Samee, A. 2016. "Computational Fluid Dynamics in Turbomachinery: A Review of State of the Art". Archives of Computational Methods in Engineering, 24.
Joly, M., Verstraete, T. and Paniagua, G., 2013. "Full Design of a Highly Loaded and Compact Contra-Rotating Fan Using Multidisciplinary Evolutionary Optimization". ASME, Vol. 6 of Proceedings of the ASME Turbo Expo, pp. 1-10. GT2013-94433.
Petrovic, M. V. and Dulikravich, G. S. and Martin, T. J., 2001. "Optimization of multistage turbines using a through-flow code". PartA: Journal of Power and Energy, Vol. 215(5), pp. 559-569.
Attia, M., 2005. "A Semi-Viscous Method for Designing Axial Compressors". Journal of Propulsion and Power, AIAA 21(5), pp. 792-796.
Youwei H., Jinju S., Peng S., Xuesong W., 2019. "Preference-Inspired Multi-Objective Throughflow-Design Optimization Approach of Axial Flow Compressor and its Application". ASME, Proceedings of the ASME Turbo Expo, pp. 1-10. GT2019-91701.
Pacciani, R., Marconcini, M., Arnone, A., 2017. "A CFD Based Throughflow Method with Three-Dimensional Flow Features Modelling". ETC12, Turbomachinery Fluid Dynamics and Thermodynamics, ETC2017-329.
Righi M., Pachidis V., Könözsy L., Pawsey L., 2018. "Three-dimensional through-flow modelling of axial flow compressor rotating stall and surge". Aerospace Science and Technology, Elsevier, Vol. 78, pp. 271-279.
Wiedermann, A, Petrovic, M. V., 2018. "Through-Flow Modeling of Single-and Two-Shaft Gas Turbines at Wide Operating Range". ASME, Vol. 2C of Proceedings of the ASME Turbo Expo, pp. 1-10. GT2018-75394.
Ricci, M., 2019. "CFD-Based Throughflow Analysis of Transonic Flows in Steam Turbines". Journal of Turbomachinery, ASME 141(11), pp. 1-10. GT2019-90851.
Jian L., Dongrun W., Jinfang T., Mingmin Z., Xiaoqing., 2020. "The Effects of Incidence and Deviation on the CFDBased Throughflow Analysis". ASME, Proceedings of the ASME Turbo Expo, pp. 1-9. GT2020-14293.
Jin G., Jun H., Xuegao W., Rong X., 2020. "A Three-Dimensional Unsteady Through-Flow Model for Rotating Stall in Axial Compressors". ASME, Proceedings of the ASME Turbo Expo, pp. 1-9. GT2020-16186.
Föllner S., Amedick V., Bonhoff B., Brillert D., Benra F.-K., 2020. "Model Validation of an Euler-Based 2DThroughflow Approach for Multistage Axial Turbine Analysis". ASME, Proceedings of the ASME Turbo Expo, pp. 1-10. GT2020-16229.
Wu, C.-H., 1952. A General Theory of Three-Dimensional Flow in Subsonic and Supersonic Turbomachines of Axial-, Radial-, and Mixed-Flow Types. Tech. Rep. NACA-TN-2604, NACA, Washington DC, Jan.
Cumpsty, N.A. 1989. Compressor Aerodynamics. Longman Scientific and Technical.
Baralon, S., Erikson, L-E, and Hall, U., 1998. "Validation of a Throughflow Time-Marching Finite-Volume Solver for Transonic Compressors". ASME, Paper 98-GT-47.
Simon, J.-F., 2007. "Contribution to Throughflow Modelling for Axial Flow Turbomachines". PhD thesis, University of Liege, Belgium.
Adamczyk, J. J., 1999. "Aerodynamic Analysis of Multistage Turbomachinery Flows in Support of Aerodynamic Design". Journal of Turbomachinery, ASME 122(2), pp. 189-217.
Adamczyk, J. J., 1984. "Model Equation for Simulating Flows in Multistage Turbomachinery". NASA-TM-86869.
Gourdain, N., 2015. "Prediction of the unsteady turbulent flow in an axial compressor stage. Part 1: Comparison of unsteady RANS and LES with experiments". Vol. 106 of Computers & Fluids, pp. 119-129.
De Laborderie, J., and S. Moreau. 2016. "Prediction of tonal ducted fan noise". Journal of Sound and Vibration 372, pp. 105-132.
Hirsch, C., Warzee, G., 1976. "A finite element method for the axisymmetric flow computation in a turbomachine". Int. J. Numer. Meth. Engng., 10: 93-113.
Lieblein, S., 1960. "Incidence and Deviation-Angle Correlations for Compressor Cascades". ASME, Vol. 82 of Trans. Journal of Basic Engineering, pp. 575-587.
Johnsen I.A., Bullock R.O., 1965. "Aerodynamic Design of Axial Flow Compressors". NASA, NASA SP-36, 1965.
Pollard, D., and Gostelow, J. P., 1967. "Some Experiments at Low Speed on Compressor Cascades". ASME, Vol. 89(3) of J. Eng. Power, pp. 427-436.
Gallimore, S. J., 1998. "Viscous Throughflow Modeling of Axial Compressor Bladerows Using a Tangential Blade Force Hypothesis". ASME, Vol. 120(4) of Journal of Turbomachinery, pp. 662-670.
Smith, B. R., 1994. "A Near Wall Model for the k-l Two Equation Turbulence Model". AIIA, 25th Fluid Dynamics Conference, Colorado Springs, pp. 1-9. Paper 94-2386.
Smith, B. R., 1995. "Prediction of Hypersonic ShockWave Turbulent Boundary Layer Interactions with the k-l Two Equation Turbulence Model". AIIA, 33rd Aerospace Sciences Meeting and Exhibit, pp. 1-9. Paper 95-0232.
König,W. M., Hennecke, D. K., and Fottner, L. 1996. "Improved Blade Profile Loss and Deviation Angle Models for Advanced Transonic Compressor Blading : Part I-A Model for Subsonic Flow, Part II-A Model for Supersonic Flow.". ASME, Vol. 118 of Journal of Turbomachinery, pp. 73-80. 94-GT-335.
Simon, J.-F., Léonard, O., 2006. "Modeling of 3-D Losses and Deviations in a Throughflow Analysis Tool". Vol. 16(3) of Journal of Thermal Science, pp. 1-7.
Manfredi, M., Fontaneto, F., 2020. "Transonic axial compressors loss correlations: Part I-analysis and update of loss models". ASME, Proceedings of the ASME Turbo Expo, pp. 1-14. GT2020-14713.
Thomas, J.-P., 2012. "Modélisation des tensions circonf érentielles en simulation méridienne d'écoulements en turbomachines". PhD thesis, University of Liege, Belgium.
Charbonnier, D., 2004. "Développement d'un modele de tensions déterministes instationnaires adpaté a la simulation de turbomachines multi-étagées". PhD thesis, University of Liege, Belgium.
