[en] The use of recycled materials and porous aggregates such as rubber crumbs and volcanic gravel (pozzolana) for the drainage layer can lead to improving thermal behaviour of the green roofs. On the other hand, the thermal performances of green roofs can be affected by the thickness of substrate and drainage layer. Therefore, the main objective of this study was to adapt modelling characteristics for different thicknesses of substrate and drainage layers used under constant and variable temperatures and solar radiation: specific rubber crumbs and volcanic gravel behaviour has been modelled. The simultaneous heat and moisture transfers within the green roof were estimated as well. According to the results, the 9cm substrate was recommended to be used for the green roofs, once the thickness of drainage layer was 4cm. Moreover, the optimum thickness of pozzolana and rubber crumbs as drainage layer was 6cm and 7cm, respectively, once the thickness of the substrate was kept constant (5cm). By increasing the thickness of substrate and drainage layers, the fluctuation of internal ceiling temperature in the green roof models with the presence of humidity decreased, but not as much as that in the green roof models without the presence of humidity.
Disciplines :
Ingénierie civile
Auteur, co-auteur :
Kazemi, Mostafa ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Courard, Luc ; Université de Liège - ULiège > Département ArGEnCo > Matériaux de construction non métalliques du génie civil
Langue du document :
Anglais
Titre :
Modelling thermal and humidity transfers within green roof systems: effect of rubber crumbs and volcanic gravel
AkbarzadehBengar, H., Shahmansouri, A. A., AkkasZangebariSabet, N., Kabirifar, K., & Tam, W. Y. V. (2020). Impact of elevated temperatures on the structural performance of recycled rubber concrete: Experimental and mathematical modeling. Construction and Building Materials, 255, 119374. https://doi.org/10.1016/j.conbuildmat.2020.119374
Altamirano-Medina, H., Davies, M., Ridley, I., Mumovic, D., & Oreszczyn, T. (2009). Guidelines to avoid mould growth in buildings. Advances in Building Energy Research, 3 (1), 221–235. https://doi.org/10.3763/aber.2009.0308
Amiri Fard, F., Jafarpour, A., & Nasiri, F. (2019). Comparative assessment of insulated concrete wall technologies and wood-frame walls in residential buildings: A multi-criteria analysis of hygrothermal performance, cost, and environmental footprints. Advances in Building Energy Research, 1–33. https://doi.org/10.1080/17512549.2019.1600583
Antretter, F., Sauer, F., Schopfer, T., & Holm, A. (2011). Validation of a hygrothermal whole building simulation software. In Proc. of Building Simulation 2011, 12th Conference of International Building Performance Simulation Association, Sydney, 1694–1701.
ASHRAE Standard 160. (2009). Criteria for moisture-control design analysis in buildings.
AzariJafari, H., Shekarchi, M., Berenjian, J., & Ahmad, B. (2015). Enhancing workability retention of concrete containing natural zeolite by superplasticizers’ combination. Special Publication, 302, 416–424.
Berardi, U., GhaffarianHoseini, A., & GhaffarianHoseini, A. (2014). State-of-the-art analysis of the environmental benefits of green roofs. Applied Energy, 115, 411–428. https://doi.org/10.1016/j.apenergy.2013.10.047
Berndtsson, J. C., Emilsson, T., & Bengtsson, L. (2006). The influence of extensive vegetated roofs on runoff water quality. Science of the Total Environment, 48–63. https://doi.org/10.1016/j.scitotenv.2005.02.035
Bianchini, F., & Hewage, K. (2012). How ‘green’ are the green roofs? Lifecycle analysis of green roof materials. Building and Environment, 48, 57–65. https://doi.org/10.1016/j.buildenv.2011.08.019
Budaiwi, I., & Abdou, A. (2013). The impact of thermal conductivity change of moist fibrous insulation on energy performance of buildings under hot-humid conditions. Energy and Buildings, 60, 388–399. https://doi.org/10.1016/j.enbuild.2013.01.035
Burch, D. M., & Chi, J. (1997). MOIST −A PC program for predicting heat and moisture transfer in building envelopes, National Institute of Standards and Technology (NIST), Gaithersburg, USA, Special Publication 917.
CABR. (2014). Thermal design code for civil building (GB 50176-201X). China Building Industry Press.
Cascone, S. (2019). Green roof design: State of the art on technology and materials. Sustainability (Switzerland), 11 (11), 1–27. https://doi.org/10.3390/su11113020
Cascone, S., Catania, F., Gagliano, A., & Sciuto, G. (2018). A comprehensive study on green roof performance for retrofitting existing buildings. Building and Environment, 136, 227–239. https://doi.org/10.1016/j.buildenv.2018.03.052
Chenani, S. B., Lehvävirta, S., & Häkkinen, T. (2015). Life cycle assessment of layers of green roofs. Journal of Cleaner Production, 90, 153–162. https://doi.org/10.1016/j.jclepro.2014.11.070
Coma, J., Pérez, G., Castell, A., Solé, C., & Cabeza, L. F. (2014). Green roofs as passive system for energy savings in buildings during the cooling period: Use of rubber crumbs as drainage layer. Energy Efficiency, 7 (5), 841–849. https://doi.org/10.1007/s12053-014-9262-x
Coma, J., Pérez, G., Solé, C., Castell, A., & Cabeza, L. F. (2016). Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. RenewableEnergy, 85 (11), 1106–1115. https://doi.org/10.1016/j.renene.2015.07.074
Courard, L., Rondeux, M., Zhao, Z., & Michel, F. (2020). Use of recycled fine aggregates from C&DW for unbound road sub-base. Materials, 1–26.
Crafford, P. L., Wessels, C. B., & Blumentritt, M. (2018). Sustainability and wood constructions: A review of green building rating systems and life-cycle assessment methods from a South African and developing world perspective. Advances in Building Energy Research, 1–20. https://doi.org/10.1080/17512549.2018.1528884
Delgado, J. M. P. Q., Barreira, E., Ramos, N. M. M., & de Freitas, V. P. (2013). Hygrothermal numerical simulation tools applied to building physics. Springer-Verlag.
Deshmukh, G., Birwal, P., Datir, R., & Patel, S. (2017). Thermal insulation materials: A tool for energy conservation. Journal of Food Processing & Technology, 8 (04|4), 1–4. https://doi.org/10.4172/2157-7110.1000670
Dvoraka, B., & Volder, A. (2013). Rooftop temperature reduction from unirrigated modular green roofs in south-central Texas. Urban Forestry & Urban Greening, 12 (1), 28–35. https://doi.org/10.1016/j.ufug.2012.05.004
Ebadati, M., & Ehyaei, M. A. (2018). Reduction of energy consumption in residential buildings with green roofs in three different climates of Iran. Advances in Building Energy Research, 14 (1), 66–93. https://doi.org/10.1080/17512549.2018.1489894
Eksi, M., Rowe, D. B., Wichman, I. S., & Andresen, J. A. (2017). Effect of substrate depth, vegetation type, and season on green roof thermal properties. Energy and Buildings, 145, 174–187. https://doi.org/10.1016/j.enbuild.2017.04.017
Fan, X., Liu, W., & Wargocki, P. (2019). Physiological and psychological reactions of sub-tropically acclimatized subjects exposed to different indoor temperatures at a relative humidity of 70%. Indoor Air, 29 (2), 215–230. https://doi.org/10.1111/ina.12523
Ferrante, A., Boiardi, L., & Fotopoulou, A. (2015). On the viability of nearly zero energy buildings in the Mediterranean urban contexts. Advances in Building Energy Research, 9 (2), 190–223. https://doi.org/10.1080/17512549.2014.941008
Fraunhofer IBP (Fraunhofer Institute for Building Physics). (2015). WUFI Pro. [Computer software]. Fraunhofer IBP.
Jafari, K., & Toufigh, V. (2017). Experimental and analytical evaluation of rubberized polymer concrete. Construction and Building Materials, 155, 495–510. https://doi.org/10.1016/j.conbuildmat.2017.08.097
Jarrah, M., Khezrzadeh, H., Mofid, M., & Jafari, K. (2019). Experimental and numerical evaluation of pistonmetallic damper (PMD). Journal of Constructional Steel Research, 54, 99–109. https://doi.org/10.1016/j.jcsr.2018.11.024
Jim, C. Y. (2014). Air-conditioning energy consumption due to green roofs with different building thermal insulation. Applied Energy, 128, 49–59. https://doi.org/10.1016/j.apenergy.2014.04.055
Jim, C. Y., & Tsang, S. W. (2011). Modeling the heat diffusion process in the abiotic layers of green roofs. Energy and Buildings, 43 (6), 1341–1350. https://doi.org/10.1016/j.enbuild.2011.01.012
Jin, L., Zhang, Y., & Zhang, Z. (2017). Human responses to high humidity in elevated temperatures for people in hot-humid climates. Building and Environment, 114, 257–266. https://doi.org/10.1016/j.buildenv.2016.12.028
Kapsalis, V. C., Vardoulakis, E., & Karamanis, D. (2014). Simulation of the cooling effect of the roof added photovoltaics. Advances in Building Energy Research, 8 (1), 41–54. https://doi.org/10.1080/17512549.2014.890534
Karamanis, D., Kyritsi, E., Krimpalis, S., Vardoulakis, E., Gorgolis, G., Kapsalis, V., Mihalakakou, G., & Ökte, N. (2013). Cooling roofs through low temperature solar-heat transformations in hydrophilic porous materials. Advances in Building Energy Research, 7 (2), 235–243. https://doi.org/10.1080/17512549.2013.865562
Karatzas, K., & Katsifarakis, N. (2018). Modelling of household electricity consumption with the aid of computational intelligence methods. Advances in Building Energy Research, 12 (1), 84–96. https://doi.org/10.1080/17512549.2017.1314831
Kazemi, M., Hajforoush, M., KhakpourTalebi, P., Daneshfar, M., Shokrgozar, A., Jahandari, S., Saberian, M., & Li, J. (2020). In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test. Journal of Sustainable Cement-Based Materials, 9, 1–18. https://doi.org/10.1080/21650373.2020.1734983
Kazemi, M., Kafi, M. A., Hajforoush, M., & Kheyroddin, A. (2020). Cyclic behavior of steel ring filled with compressive plastic or concrete, installed in concentric bracing system. Asian Journal of Civil Engineering, 21 (1), 29–39. https://doi.org/10.1007/s42107-019-00181-7
Kazemi, M., Li, J., Harehdasht, S. L., Yousefieh, N., Jahandari, S., & Saberian, M. (2019). Non-linear behaviour of concrete beams reinforced with GFRP and CFRP bars grouted in sleeves. Structures, 23, 87–102. https://doi.org/10.1016/j.istruc.2019.10.013
Kazemi, M., Madandoust, R., & de Brito, J. (2019). Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing. Construction and Building Materials, 224, 630–638. https://doi.org/10.1016/j.conbuildmat.2019.07.110
Künzel, H. M. (1994). VerfahrenZurein- und zweidimensionalenBerechnung des- gekoppeltenWärme- und Feuchtetransports in BauteilenmitEinfachen Ken- nwerten. Universität Stuttgart.
Lei, K.-T., Tang, J.-S., & Chen, P.-H. (2019). Numerical simulation and experiments with green roofs for increasing indoor thermal comfort. Journal of the Chinese Institute of Engineers, 42 (4), 346–356. https://doi.org/10.1080/02533839.2019.1585207
Li, Y., & Zhu, Q. (2003). Simultaneous heat and moisture transfer with moisture sorption, condensation and capillary liquid diffusion in porous textiles. Textile Research Journal, 73 (6), 515–524. https://doi.org/10.1177/004051750307300609
Ling, H., Chen, C., Qin, H., Wei, S., Lin, J., Li, N., Zhang, M., Yu, N., & Li, Y. (2016). Indicators evaluating thermal inertia performance of envelops with phase change material. Energy and Buildings, 122, 175–184. https://doi.org/10.1016/j.enbuild.2016.04.009
Madandoust, R., & Kazemi, M. (2017). Numerical analysis of break-off test method on concrete. Construction and Building Materials, 151, 487–493. https://doi.org/10.1016/j.conbuildmat.2017.05.126
Madandoust, R., Kazemi, M., KhkapourTalebi, P., & de Brito, J. (2019). Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres. Construction and Building Materials, 223, 1038–1052. https://doi.org/10.1016/j.conbuildmat.2019.08.006
Mickovski, S. B., Buss, K., McKenzie, B. M., & Sökmener, B. (2013). Laboratory study on the potential use of recycled inert construction waste material in the substrate mix for extensive green roofs. Ecological Engineering, 61, 706–714. https://doi.org/10.1016/j.ecoleng.2013.02.015
Mohammadi, M., Kafi, M. A., Kheyroddin, A., & Ronagh, H. R. (2019). Experimental and numerical investigation of an innovative buckling-restrained fuse under cyclic loading. Structures, 22, 186–199. https://doi.org/10.1016/j.istruc.2019.07.014
Mohammed, B. S., Hossain, K. M. A., Swee, J. T. E., Wong, G., & Abdullahi, M. (2012). Properties of crumb rubber hollow concrete block. Journal of Cleaner Production, 23 (1), 57–67. https://doi.org/10.1016/j.jclepro.2011.10.035
Navarro, L., Garcia, A. D., Solé, C., Castell, A., & Cabeza, L. F. (2012). Thermal loads inside buildings with phase change materials: Experimental results. Energy Procedia, 20, 342–349. https://doi.org/10.1016/j.egypro.2012.11.040
Nematzadeh, M., Shahmansouri, A. A., & Fakoor, M. (2020). Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: Optimization and prediction via RSM and GEP. Construction and Building Materials, 252, 119057. https://doi.org/10.1016/j.conbuildmat.2020.119057
Ngan, G. (2004). Green roof policies: Tools for encouraging sustainable design. Landscape Architecture Canada Foundation, 2–49. http://www.gnla.ca/assets/Policy%20report.pdf
Oberndorfer, E., Lundholm, J., Bass, B., Coffman, R. R., Doshi, H., Dunnett, N., Gaffin, S., Kohler, M., Liu, K. K. Y., & Rowe, B. (2007). Green roofs as urban ecosystems: Ecological structures, functions, and services. BioScience, 57 (10), 823–833. https://doi.org/10.1641/B571005
Palla, A., Gnecco, I., & Lanza, L. G. (2009). Unsaturated 2D modelling of subsurface water flow in the coarse-grained porous matrix of a green roof. Journal of Hydrology, 379 (1-2), 193–204. https://doi.org/10.1016/j.jhydrol.2009.10.008
Papafotiou, M., Pergialioti, N., Tassoula, L., Massas, I., & Kargas, G. (2013). Growth of native aromatic xerophytes in an extensive Mediterranean green roof, as affected by substrate type and depth, and irrigation frequency. HortScience, 48 (10), 1327–1333. https://doi.org/10.21273/HORTSCI.48.10.1327
Parizotto, S., & Lamberts, R. (2011). Investigation of green roof thermal performance in temperate climate: A case study of an experimental building in Florianópolis city, Southern Brazil. Energy and Buildings, 43 (7), 1712–1722. https://doi.org/10.1016/j.enbuild.2011.03.014
Pérez, G., Coma, J., Solé, C., Castell, A., & Cabeza, L. F. (2012). Green roofs as passive system for energy savings when using rubber crumbs as drainage layer. Energy Procedia, 30, 452–460. https://doi.org/10.1016/j.egypro.2012.11.054
Pérez, G., Vila, A., Rincón, L., Solé, C., & Cabeza, L. F. (2012). Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material. Applied Energy, 97, 347–354. https://doi.org/10.1016/j.apenergy.2011.11.051
Pfretzschner, J., & Rodriguez, R. M. (1999). Acoustic properties of rubber crumbs. Polymer Testing, 18 (2), 81–92. https://doi.org/10.1016/S0142-9418(98)00009-9
Raji, B., Tenpierik, M. J., & van den Dobbelteen, A. (2015). The impact of greening systems on building energy performance: A literature review. Renewable & Sustainable Energy Reviews, 45, 610–623. https://doi.org/10.1016/j.rser.2015.02.011
Ramin, H., Hanafizadeh, P., Ehterami, T., & AkhavanBehabadi, M. A. (2019). Life cycle-based multi-objective optimization of wall structures in climate of Tehran. Advances in Building Energy Research, 13 (1), 18–31. https://doi.org/10.1080/17512549.2017.1344137
Saberian, M., Li, J., & Cameron, D. (2019a). Effect of crushed glass on behavior of crushed recycled pavement materials together with crumb rubber for making a clean green base and subbase. Journal of Materials in Civil Engineering, 31 (7), 04019108. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002765
Saberian, S., Li, J., & Setunge, S. (2019). Evaluation of permanent deformation of a new pavement base and subbase containing unbound granular materials, crumb rubber and crushed glass. Journal of Cleaner Production, 230, 38–45. https://doi.org/10.1016/j.jclepro.2019.05.100
Sadeghian, F., Haddad, A., Jahandari, S., Rasekh, H., & Ozbakkaloglu, T. (2020). Effects of electrokinetic phenomena on the load-bearing capacity of different steel and concrete piles: A small-scale experimental study. Canadian Geotechnical Journal. https://doi.org/10.1139/cgj-2019-0650
Sailor, D. J., & Hagos, M. (2011). An updated and expanded set of thermal property data for green roof growing media. Energy and Buildings, 43 (9), 2298–2303. https://doi.org/10.1016/j.enbuild.2011.05.014
Schafaczek, B., & Zirkelbach, D. (2013). Ermittlung von MaterialeigenschaftenundeffektivenÜbergangsparametern von Dachbegrünungenzurzuverlässigen Simulation der hygrothermischenVerhältnisse in und unterGründächernbeibeliebigenNutzungen und unterschiedlichenStandorten, ForschungsinitiativeZukunftBau, F 2863, Band.
Schulte-Wrede, M., Merk, M., Gamper, A., Winter, S., & Wolf, A. (2012). Hygrothermal behaviour of a large scale wooden flat roof structure in Central Europe. WCTE, 55–62.
Soleimani, S. S., Jahandari, S., Aberoumand, S., Rahmani, A., & Shokrgozar, A. (2020). Cu/Oil nanofluids flow over a semi-infinite plate accounting an experimental model. Heat Transfer Asian Research, 49 (3), 1338–1354. https://doi.org/10.1002/htj.21664
Stovin, V., Poë, S., De-Ville, S., & Berretta, C. (2015). The influence of substrate andvegetation configuration on green roof hydrological performance. Ecological Engineering, 85, 159–172. https://doi.org/10.1016/j.ecoleng.2015.09.076
Tabares-Velasco, P. C., Zhao, M., Peterson, N., Srebric, J., & Berghage, R. (2012). Validation of predictive heat and mass transfer green roof model with extensive green roof field data. Ecological Engineering, 47, 165–173. https://doi.org/10.1016/j.ecoleng.2012.06.012
Teemusk, A., & Mander, U. l. (2009). Green roof potential to reduce temperature fluctuations of a roof membrane: A case study from Estonia. Building and Environment, 44 (3), 643–650. https://doi.org/10.1016/j.buildenv.2008.05.011
Theodosiou, T. (2011). Green roofs in buildings: Thermal and environmental behavior. Advances in Building Energy Research, 3 (1), 271–288. https://doi.org/10.3763/aber.2009.0311
Ting, M.-H. (2011). Numerical simulation of the general insulation material in the application of increasing indoor thermal comfort. [Master Thesis, Department of Civil Engineering, National Taiwan University]. (In Chinese).
Toghroli, A., Mehrabi, P., Shariati, M., Trung, N. T., Jahandari, S., & Rasekh, H. (2020). Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers. Construction and Building Materials, 252, 1–22. https://doi.org/10.1016/j.conbuildmat.2020.118997
Tommasi, P., Verrucci, L., & Rotonda, T. (2015). Mechanical properties of a weak pyroclastic rock and their relationship with microstructure. Canadian Geotechnical Journal, 52 (2), 211–223. https://doi.org/10.1139/cgj-2014-0149
Tsutsumi, H., Tanabe, S., Harigaya, J., Iguchi, Y., & Nakamura, G. (2007). Effect of humidity on human comfort and productivity after step changes from warm and humid environment. Building and Environment, 42 (12), 4034–4042. https://doi.org/10.1016/j.buildenv.2006.06.037
Uhl, M., & Schiedt, L. (2008). Green roof storm water retention –monitoring results. In 11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31/ 8-5/9.
Vertaľ, M., Zozulák, M., Vašková, A., & Korjenic, A. (2018). Hygrothermal initial condition for simulation process of green building construction. Energy and Buildings, 167, 166–176. https://doi.org/10.1016/j.enbuild.2018.02.004
Vesuviano, G., & Stovin, V. (2013). A generic hydrological model for a green roof drainage layer. Water Science & Technology, 68 (4), 769–775. https://doi.org/10.2166/wst.2013.294
Vijayaraghavan, K. (2016). Green roofs: A critical review on the role of components, benefits, limitations and trends. Renewable and Sustainable Energy Reviews, 57, 740–752. https://doi.org/10.1016/j.rser.2015.12.119
Vijayaraghavan, K. U., Joshi, U. M., & Balasubramanian, R. (2012). A field study to evaluate runoff quality from green roofs. Water Research, 46 (4), 1337–1345. https://doi.org/10.1016/j.watres.2011.12.050
Vila, A., Pérez, G., Solé, C., Fernández, A. I., & Cabeza, L. F. (2012). Use of rubber crumbs as drainage layer in experimental green roofs. Building and Environment, 48, 101–106. https://doi.org/10.1016/j.buildenv.2011.08.010
Wanielista, M., Kelly, M., & Hardin, M. (2008). A comparative analysis of green roof designs including depth of media, drainage layer materials, and pollution control media. Florida Department of Environmental Protection.
Yu, C., & Hien, W. N. (2009). Thermal impact of strategic landscaping in cities: A review. Advances in Building Energy Research, 3 (1), 237–260. https://doi.org/10.3763/aber.2009.0309
Zhao, Z., Courard, L., Groslambert, S., Jehin, T., Léonard, A., & Jianzhuang, X. (2020). Use of recycled concrete aggregates from precast block for the production of new building blocks: An industrial scale study. Resources, Conservation and Recycling, 157. https://doi.org/10.1016/j.resconrec.2020.104786
Zirkelbach, D. (2017, April 19–21). Green roofs− hygrothermal simulation of moisture and energy performance. Proceedings of the 1st International Conference on Construction Materials for Sustainable Future, Zadar, Croatia (pp. 810–815).
Zirkelbach, D., Mehra, S.-R., Sedlbauer, K.-P., Künzel, H.-M., Stöckl, B. (2017). A hygrothermal green roof model to simulate moisture and energy performance of building components. Energy and Buildings, 145, 79–91. https://doi.org/10.1016/j.enbuild.2017.04.001
