Rodriguez, F., The European commission's proposed CO2 standards for heavy-duty vehicles. 2018 [Icct].
Wang, T., Zhang, Y., Zhang, J., Shu, G., Peng, Z., Analysis of recoverable exhaust energy from a light-duty gasoline engine. Appl Therm Eng 53:2 (2013), 414–419.
Koeberlein, D., Cummins SuperTruck program relevance - program objectives. Cummins, 2012.
Allain, M., Atherton, D., Gruden, I., Singh, S., Sisken, K., Daimler ’ s super truck program ; 50 % brake thermal efficiency 2012 directions in engine-efficiency and emissions. 2012.
Zhao, R., Zhang, H., Song, S., Tian, Y., Yang, Y., Liu, Y., Integrated simulation and control strategy of the diesel engine–organic Rankine cycle (ORC) combined system. Energy Convers Manag 156:100 (2018), 639–654.
Di Battista, D., Di Bartolomeo, M., Villante, C., Cipollone, R., On the limiting factors of the waste heat recovery via ORC-based power units for on-the-road transportation sector. Energy Convers Manag 155 (2018), 68–77.
Karvountzis-Kontakiotis, A., Pesiridis, A., Zhao, H., Alshammari, F., Franchetti, B., Pesmazoglou, I., et al. Effect of an ORC waste heat recovery system on diesel engine fuel economy for off-highway vehicles. SAE Technical Papers, 2017, 5–6 2017-01-0136 https://www.researchgate.net/publication/315576247_Effect_of_an_ORC_Waste_Heat_Recovery_System_on_Diesel_Engine_Fuel_Economy_for_Off-Highway_Vehicles/citation/download.
Hountalas, D.T., Mavropoulos, G.C., Katsanos, C., Knecht, W., Improvement of bottoming cycle efficiency and heat rejection for HD truck applications by utilization of EGR and CAC heat. Energy Convers Manag 53:1 (2012), 19–32.
Grelet, V., Dufour, P., Nadri, M., Reiche, T., Lemort, V., Modeling and control of Rankine based waste heat recovery systems for heavy duty trucks. IFAC-PapersOnLine 48 (2015), 568–573.
Seitz, D., Gehring, O., Bunz, C., Brunschier, M., Sawodny, O., Design of a nonlinear, dynamic feedforward part for the evaporator control of an Organic Rankine Cycle in heavy duty vehicles. IFAC-PapersOnLine 49:11 (2016), 625–632.
Torregrosa, A., Galindo, J., Dolz, V., Royo-Pascual, L., Haller, R., Melis, J., Dynamic tests and adaptive control of a bottoming organic Rankine cycle of IC engine using swash-plate expander. Energy Convers Manag 126 (2016), 168–176.
Peralez, J., Tona, P., Lepreux, O., Sciarretta, A., Voise, L., Dufour, P., Nadri, M., Improving the control performance of an organic rankine cycle system for waste heat recovery from a heavy-duty diesel engine using a model-based approach. Decis Contr, 2013, 6830–6836.
Peralez, J., Recuperation d’énergie par cycle de Rankine à bord d'un véhicule : commande et gestion d’énergie. 2015, PhD thesis, University de Lyon, France.
Lutz, R., Motisi, G., Bruemmer, R., Device and method for recovering waste heat energy and a utility vehicle. 2015, United States Patent DE102015016783A1.
Dickes, R., Charge-sensitive methods for the off-design performance characterization of organic Rankine cycle (ORC) power systems. 2019, PhD thesis, University of Liège, Belgium.
Grelet, V., Rankine cycle based waste heat recovery system applied to heavy duty vehicles: topological optimization and model based control. PhD thesis., 2016, University de Lyon, France and University of Liège, Belgium.
Galuppo, F., Reiche, T., Lemort, V., Dufour, P., Nadri, M., Huin, X., Waste heat recovery (WHR) assessment in complete truck simulation environment. 2018 SIA POWERTRAIN conference, 2018 May 2018, Rouen, France.
Vaja, I., Gambarotta, A., Internal combustion engine (ICE) bottoming with organic rankine cycles (ORCs). Energy 35:2 (2010), 1084–1093.
Preißinger, M., Schwöbel, J.A.H., Klamt, A., Brüggemann, D., Multi-criteria evaluation of several million working fluids for waste heat recovery by means of Organic Rankine Cycle in passenger cars and heavy-duty trucks. Appl Energy 206 (2017), 887–899.
Scaccabarozzi, R., Tavano, M., Invernizzi, C.M., Martelli, E., Comparison of working fluids and cycle optimization for heat recovery ORCs from large internal combustion engines. Energy 158 (2018), 396–416.
Guillaume, L., Lemort, V., Comparison of different ORC typologies for heavy-duty trucks by means of a thermo-economic optimization. Energy 182 (2019), 706–728.
Lopes, J., Douglas, R., McCullough, G., O'Shaughnessy, R., Hanna, A., Rouaud, C., Seaman, R., Review of Rankine cycle systems components for hybrid engines waste heat recovery. 2012, SAE Technical Paper Series 2012-01-1942.
Quoilin, Sylvain, Sustainable energy conversion through the use of Organic Rankine Cycles for waste heat recovery and solar applications. 2011, PhD Thesis, University of Liège, Belgium.
Incropera, F., Dewitt, D., Bergman, T., Lavine, A., Fundamentals of heat and mass transfer. 1993 Number 1986.
Winterton, R.H.S., Where did the Dittus and Boelter equation come from?. Int J Heat Mass Tran 41:4–5 (1998), 809–810.
Shah, M.M., New correlation for heat transfer during boiling flow through pipes. Build Eng 2407 (1976), 66–86.
Shah, M.M., A general correlation for heat transfer during film condensation inside pipes. Int J Heat Mass Tran 22:4 (1979), 547–556.
Kandlikar, S.G., Fundamental issues related to flow boiling in minichannels and microchannels. Exp Therm Fluid Sci 26:2–4 (2002), 389–407.
Chang, Y.J., Wang, C.C., A generalized heat transfer correlation for louver fin geometry. Int J Heat Mass Tran 40:3 (1997), 533–544.
Chan Kang, H., Jun, G.W., Heat transfer and flow resistance characteristics of Louver fin geometry for automobile applications. J Heat Tran, 133(10), 2011 101802(6pages).
El Hajal, J., Thome, J.R., Cavallini, A., Condensation in horizontal tubes, part 1: two-phase flow pattern map. Int J Heat Mass Tran 46:18 (2003), 3349–3363.
Kanefsky, P., Nelson, V., Ranger, M., A systems engineering approach to engine cooling design. SAE Technical Papers, 1999, SP 1541 Paper 1999-01-3780 https://www.sae.org/publications/books/content/sp-1541/.
Yang, B., Zhang, X., Yu, T., Shu, H., Fang, Z., Grouped grey wolf optimizer for maximum power point tracking of doubly-fed induction generator based wind turbine. Energy Convers Manag 133 (2017), 427–443.
Yang, B., Yu, T., Shu, H., Zhang, X., Qu, K., Jiang, L., Democratic joint operations algorithm for optimal power extraction of PMSG based wind energy conversion system. Energy Convers Manag 159 (2018), 312–326.
Galuppo, F., Dufour, P., Nadri, M., Reiche, T., Lemort, V., Experiment design for waste heat recovery modeling in heavy duty trucks. IFAC-PapersOnLine 51:31 (2018), 726–731.
Aufderheide, B., Bequette, B.W., Extension of dynamic matrix control to multiple models. Comput Chem Eng 27:8–9 (2003), 1079–1096.
Skogestad, S., Tuning for smooth PID control with acceptable disturbance rejection. Ind Eng Chem Res 45:23 (2006), 7817–7822.
Rivera, D., Morari, M., Skogestad, S., Internal model control. 4. PID controller design. American Chemical Society 25 (1986), 252–265.
