Article (Scientific journals)
Recent Advances in Experimental Techniques for Flow and Mass Transfer Analyses in Thermal Separation Systems
Hampel, U.; Schubert, M.; Alexander, D. Ö. ß et al.
2020In Chemie Ingenieur Technik, 92 (7), p. 926-948
Peer Reviewed verified by ORBi
 

Files


Full Text
20_CIT_Hampel.pdf
Publisher postprint (5.79 MB)
Request a copy

All documents in ORBi are protected by a user license.

Send to



Details



Keywords :
Experimental techniques; Measurement techniques; Thermal separation systems; Thermal Engineering; Complex geometries; Follow up; Mass transfer analysis; Separation units; Thermal separation; Mass transfer
Abstract :
[en] Modelling flow and mass transfer of thermal separation equipment constitutes one of the most challenging tasks in fluids process engineering. The difficulty of this task comes from the multiscale multiphase flow phenomena in rather complex geometries. Both analysis of flow and mass transfer on different scales as well as validation of models and simulation results require advanced experimental and measurement techniques. As a follow-up to intensive discussions during the 2019 Tutzing Symposium “Separation Units 4.0” a wide set of available modern experimental technologies is presented. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Disciplines :
Engineering, computing & technology: Multidisciplinary, general & others
Author, co-author :
Hampel, U.;  Helmholtz-Zentrum Dresden-Rossendorf, Institut für Fluiddynamik, Bautzner Landstraße 400, Dresden, 01328, Germany, Technische Universität Dresden, Institut für Energietechnik, Dresden, 01062, Germany
Schubert, M.;  Helmholtz-Zentrum Dresden-Rossendorf, Institut für Fluiddynamik, Bautzner Landstraße 400, Dresden, 01328, Germany
Alexander, D. Ö. ß;  Helmholtz-Zentrum Dresden-Rossendorf, Institut für Fluiddynamik, Bautzner Landstraße 400, Dresden, 01328, Germany
Sohr, J.;  Technische Universität Dresden, Institut für Energietechnik, Dresden, 01062, Germany
Vishwakarma, V.;  Helmholtz-Zentrum Dresden-Rossendorf, Institut für Fluiddynamik, Bautzner Landstraße 400, Dresden, 01328, Germany, Technische Universität Dresden, Institut für Energietechnik, Dresden, 01062, Germany
Repke, J.-U.;  Technische Universität Berlin, Institut für Prozess- und Verfahrenstechnik, Straße des 17. Juni 135, Berlin, 10623, Germany
Gerke, S. J.;  Technische Universität Berlin, Institut für Prozess- und Verfahrenstechnik, Straße des 17. Juni 135, Berlin, 10623, Germany
Leuner, H.;  Technische Universität Berlin, Institut für Prozess- und Verfahrenstechnik, Straße des 17. Juni 135, Berlin, 10623, Germany
Rädle, M.;  Hochschule Mannheim, Center for Mass Spectrometry and Optical Spectroscopy, John-Deere-Straße 81A, Mannheim, 68163, Germany
Kapoustina, V.;  Hochschule Mannheim, Center for Mass Spectrometry and Optical Spectroscopy, John-Deere-Straße 81A, Mannheim, 68163, Germany
Schmitt, L.;  Hochschule Mannheim, Center for Mass Spectrometry and Optical Spectroscopy, John-Deere-Straße 81A, Mannheim, 68163, Germany
Grünewald, M.;  Ruhr-Universität Bochum, Lehrstuhl für Fluidverfahrenstechnik, Universitätsstraße 150, Bochum, 44801, Germany
Brinkmann, J. H.;  Ruhr-Universität Bochum, Lehrstuhl für Fluidverfahrenstechnik, Universitätsstraße 150, Bochum, 44801, Germany
Plate, D.;  Ruhr-Universität Bochum, Lehrstuhl für Fluidverfahrenstechnik, Universitätsstraße 150, Bochum, 44801, Germany
Kenig, E. Y.;  Universität Paderborn, Fakultät für Maschinenbau, Lehrstuhl für Fluidverfahrenstechnik, Pohlweg 55, Paderborn, 33098, Germany
Lutters, N.;  Universität Paderborn, Fakultät für Maschinenbau, Lehrstuhl für Fluidverfahrenstechnik, Pohlweg 55, Paderborn, 33098, Germany
Bolenz, L.;  Universität Paderborn, Fakultät für Maschinenbau, Lehrstuhl für Fluidverfahrenstechnik, Pohlweg 55, Paderborn, 33098, Germany
Buckmann, F.;  Universität Paderborn, Fakultät für Maschinenbau, Lehrstuhl für Fluidverfahrenstechnik, Pohlweg 55, Paderborn, 33098, Germany
Toye, Dominique  ;  Université de Liège - ULiège > Department of Chemical Engineering > Génie de la réaction et des réacteurs chimiques
Arlt, W.;  Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Separation Science and Technology, Egerlandstraße 3, Erlangen, 91058, Germany
Linder, T.;  Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Separation Science and Technology, Egerlandstraße 3, Erlangen, 91058, Germany
Hoffmann, Rainer;  Linde Aktiengesellschaft, Engineering Divisionn, Dr.-Carl-von-Lin-de-Straße 6–14, 82049 Pullach bei Munchen, Germany
Klein, H.;  Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, Garching, 85748, Germany
Rehfeldt, S.;  Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, Garching, 85748, Germany
Winkler, T.;  Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, Garching, 85748, Germany
Bart, H.-J.;  Technische Universität Kaiserslautern, Lehrstuhl für Thermische Verfahrenstechnik, PF 3049, Kaiserslautern, 67653, Germany
Wirz, D.;  Technische Universität Kaiserslautern, Lehrstuhl für Thermische Verfahrenstechnik, PF 3049, Kaiserslautern, 67653, Germany
Schulz, J.;  Technische Universität Kaiserslautern, Lehrstuhl für Thermische Verfahrenstechnik, PF 3049, Kaiserslautern, 67653, Germany
Scholl, S.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Augustin, W.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Jasch, K.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Schlüter, F.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Schwerdtfeger, N.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Jahnke, S.;  Technische Universität Braunschweig, Institute for Chemical and Thermal Process Engineering, Langer Kamp 7, Braunschweig, 38106, Germany
Jupke, A.;  RWTH Aachen University, Aachener Verfahrenstechnik, Fluidverfahrenstechnik, Forckenbeckstraße 51, Aachen, 52074, Germany
Kabatnik, C.;  RWTH Aachen University, Aachener Verfahrenstechnik, Fluidverfahrenstechnik, Forckenbeckstraße 51, Aachen, 52074, Germany
Braeuer, A. S.;  Technische Universität Bergakademie Freiberg (TUBAF), Institute of Thermal-, Environmental and Resources' Process Engineering (ITUN), Leipziger Straße 28, Freiberg, 09599, Germany
D'Auria, M.;  Technische Universität Bergakademie Freiberg (TUBAF), Institute of Thermal-, Environmental and Resources' Process Engineering (ITUN), Leipziger Straße 28, Freiberg, 09599, Germany
Runowski, T.;  Bayer AG, Engineering & Technology, Thermal Separation Technologies, Leverkusen, 51368, Germany
Casal, M. F.;  Bayer AG, Engineering & Technology, Thermal Separation Technologies, Leverkusen, 51368, Germany
Becker, K.;  Bayer AG, Engineering & Technology, Thermal Separation Technologies, Leverkusen, 51368, Germany
David, A.-L.;  Bayer AG, Engineering & Technology, Thermal Separation Technologies, Leverkusen, 51368, Germany
Górak, A.;  TU Dortmund University, Department of Biochemical and Chemical Engineering, Laboratory of Fluid Separations, Emil-Figge-Straße 70, Dortmund, 44227, Germany
Skiborowski, M.;  TU Dortmund University, Department of Biochemical and Chemical Engineering, Laboratory of Fluid Separations, Emil-Figge-Straße 70, Dortmund, 44227, Germany
Groß, K.;  TU Dortmund University, Department of Biochemical and Chemical Engineering, Laboratory of Fluid Separations, Emil-Figge-Straße 70, Dortmund, 44227, Germany
Qammar, H.;  TU Dortmund University, Department of Biochemical and Chemical Engineering, Laboratory of Fluid Separations, Emil-Figge-Straße 70, Dortmund, 44227, Germany
More authors (36 more) Less
Language :
English
Title :
Recent Advances in Experimental Techniques for Flow and Mass Transfer Analyses in Thermal Separation Systems
Publication date :
2020
Journal title :
Chemie Ingenieur Technik
ISSN :
0009-286X
eISSN :
1522-2640
Publisher :
Wiley-VCH Verlag
Volume :
92
Issue :
7
Pages :
926-948
Peer reviewed :
Peer Reviewed verified by ORBi
Available on ORBi :
since 01 July 2020

Statistics


Number of views
82 (5 by ULiège)
Number of downloads
3 (3 by ULiège)

Scopus citations®
 
25
Scopus citations®
without self-citations
8
OpenCitations
 
16

Bibliography


Similar publications



Contact ORBi