Adelmann B, Ngo C, Hellmann R (2015) High aspect ratio cutting of metals using water jet guided laser. Int J Adv Manuf Technol. 10.1007/s00170-015-7161-8
Al-Sulaiman FA, Yilbas BS, Ahsan M (2006) CO2 laser cutting of a carbon/carbon multi-lamelled plain-weave structure. J Mater Process Technol. 10.1016/j.jmatprotec.2005.12.004
Aslam M (2013) Bulk etching of silicon wafer and development of a polyimide membrane. In: Journal of physics: conference series, vol 439. Institute of Physics Publishing. 10.1088/1742-6596/439/1/012029
Battaglia J, Perrottet D, Housh R, Richerzhagen B (2018) Synova has re-invented the laser: no heat damage, no beam divergence, no cutting gas, no deposition. Laser Institute of America, p M905. 10.2351/1.5060916
Baumeister M, Dickmann K, Hoult T (2006) Fiber laser micro-cutting of stainless steel sheets. Appl Phys A Mater Sci Process. 10.1007/s00339-006-3687-9
Bessonov A, Kirikova M, Haque S et al (2014) Highly reproducible printable graphite strain gauges for flexible devices. Sens Actuators A Phys. 10.1016/j.sna.2013.11.034
Booth HJ, Abbott CE, Allott RM, Boehlen KL, Fieret J, Greuters J, Trimble P, Pedder J (2005) Laser micromachining techniques for industrial MEMS applications. In: Photon processing in microelectronics and photonics IV, vol 5713. SPIE, p 190. 10.1117/12.599414
Chen KS, Ou KS (2015) MEMS residual stress characterization: methodology and perspective. In: Handbook of silicon based MEMS materials and technologies, 2nd edn. Elsevier Inc., pp 398–412. 10.1016/B978-0-323-29965-7.00017-8
Chen X, Wang Y, Wang Z, Liu H, Chi G (2018) Study on micro reciprocated wire-EDM for complex indexing structure. In: Procedia CIRP, vol 68. Elsevier B.V., pp 120–125. 10.1016/j.procir.2017.12.033
Di S, Chu X, Wei D et al (2009) Analysis of kerf width in micro-WEDM. Int J Mach Tools Manuf. 10.1016/j.ijmachtools.2009.04.006
Dupont F, Stoukatch S, Laurent P et al (2018) 355 nm UV laser patterning and post-processing of FR4 PCB for fine pitch components integration. Opt Lasers Eng. 10.1016/j.optlaseng.2017.08.014
Fedosejevs R, Argument M, Sardarli A et al (2003) Laser micromachining for microfluidic, microelectronic and MEMS applications. Proc Int Conf MEMS NANO Smart Syst. 10.1109/icmens.2003.1221964
Gao S, Huang H (2017) Recent advances in micro- and nano-machining technologies. Front Mech Eng 12(1):18–32. 10.1007/s11465-017-0410-9
Gaspar C, Olkkonen J, Passoja S, Smolander M (2017) Paper as active layer in inkjet-printed capacitive humidity sensors. Sensors (Switzerland). 10.3390/s17071464
Ghany KA, Newishy M (2005) Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CW Nd:YAG laser. J Mater Process Technol. 10.1016/j.jmatprotec.2005.02.251
Gower MC (2000) Industrial applications of laser micromachining. Opt Express. 10.1364/oe.7.000056
Harrey PM, Ramsey BJ, Evans PSA, Harrison DJ (2002) Capacitive-type humidity sensors fabricated using the offset lithographic printing process. Sens Actuators B Chem. 10.1016/s0925-4005(02)00240-x
Herzog D, Jaeschke P, Meier O, Haferkamp H (2008) Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP. Int J Mach Tools Manuf. 10.1016/j.ijmachtools.2008.04.007
Hsu W-T (2008) Recent progress in silicon MEMS oscillators. In: Proceedings of the 40th annual precise time and time interval systems and applications meeting, Reston, Virginia, December 2008, pp 135–146
Huff M (2002) MEMS fabrication. Sens Rev. 10.1108/02602280210697087
Karatas C, Keles O, Uslan I, Usta Y (2006) Laser cutting of steel sheets: influence of workpiece thickness and beam waist position on kerf size and stria formation. J Mater Process Technol. 10.1016/j.jmatprotec.2005.08.017
Knowles MRH, Rutterford G, Karnakis D, Ferguson A (2007) Micro-machining of metals, ceramics and polymers using nanosecond lasers. Int J Adv Manuf Technol. 10.1007/s00170-007-0967-2
LaFratta CN, Simoska O, Pelse I et al (2015) A convenient direct laser writing system for the creation of microfluidic masters. Microfluid Nanofluidics. 10.1007/s10404-015-1574-4
Lau GK, Shrestha M (2017) Ink-jet printing of micro-electro-mechanical systems (MEMS). Micromachines. 10.3390/mi8060194
Lee S, Park S, Il Cho D (1999) Surface/bulk micromachining (SBM) process: a new method for fabricating released MEMS in single crystal silicon. J Microelectromechanical Syst. 10.1109/84.809055
Li T, Zhou C, Liu Z, Wang W (2011) Computational and experimental study of nanosecond laser ablation of crystalline silicon. Int Commun Heat Mass Transf. 10.1016/j.icheatmasstransfer.2011.05.010
Liao Y, Song J, Li E et al (2012) Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing. Lab Chip. 10.1039/c2lc21015k
Maeda R, Takahashi M, Sasaki S (2007) Commercialization of MEMS and nano manufacturing. In: Proceedings of the 6th international IEEE conference on polymers and adhesives in microelectronics and photonics, polytronic, pp 20–23. 10.1109/POLYTR.2007.4339130
Mai TA, Richerzhagen B, Stay K (2018) Recent advances in precision machining of various materials with the laser microjet®. Laser Institute of America, p M704. 10.2351/1.5061151
Meijer J (2004) Laser beam machining (LBM), state of the art and new opportunities. J Mater Process Technol 149:2–17. 10.1016/j.jmatprotec.2004.02.003
Molina-Lopez F, Briand D, De Rooij NF (2012) All additive inkjet printed humidity sensors on plastic substrate. Sens Actuators B Chem. 10.1016/j.snb.2012.02.042
Montaseri MH, Xie J, Chang H, Chao Z, Wood G, Kraft M (2015) Atmospheric pressure mode localization coupled resonators force sensor. In: 2015 transducers—2015 18th international conference on solid-state sensors, actuators and microsystems, TRANSDUCERS 2015. Institute of Electrical and Electronics Engineers Inc., pp 1183–1186. 10.1109/TRANSDUCERS.2015.7181140
Müller F, Monaghan J (2000) Non-conventional machining of particle reinforced metal matrix composite. Int J Mach Tools Manuf. 10.1016/s0890-6955(99)00121-2
Okamoto Y, Ikeda T, Kurihara H, Okada A, Kido M (2018) Control of kerf width in multi-wire EDM slicing of semiconductors with circular section. In: Procedia CIRP, vol 68. Elsevier B.V., pp 100–103. 10.1016/j.procir.2017.12.030
Pahuja R, Ramulu M, Hashish M (2017) Abrasive waterjet profile cutting of thick titanium/graphite fiber metal laminate. In: ASME International, p V002T02A013. 10.1115/imece2016-67136
Park ES, Chen Y, Liu TJK, Subramanian V (2013) A new switching device for printed electronics: inkjet-printed microelectromechanical relay. Nano Lett. 10.1021/nl4028632
Rahman MT, Rahimi A, Gupta S, Panat R (2016) Microscale additive manufacturing and modeling of interdigitated capacitive touch sensors. Sens Actuators A Phys. 10.1016/j.sna.2016.07.014
Saari M, Cox B, Richer E et al (2015) Fiber encapsulation additive manufacturing: an enabling technology for 3D printing of electromechanical devices and robotic components. 3D Print Addit Manuf. 10.1089/3dp.2015.0003
Sekitani T, Takamiya M, Noguchi Y, Nakano S, Kato Y, Hizu K, Kawaguchi H, Sakurai T, Someya T (2006) A large-area flexible wireless power transmission sheet using printed plastic MEMS switches and organic field-effect transistors. In: Technical digest—International electron devices meeting, IEDM. 10.1109/IEDM.2006.346764
Skylar-Scott MA, Gunasekaran S, Lewis JA (2016) Laser-assisted direct ink writing of planar and 3D metal architectures. Proc Natl Acad Sci. 10.1073/pnas.1525131113
Spletzer M, Raman A, Wu AQ et al (2006) Ultrasensitive mass sensing using mode localization in coupled microcantilevers. Appl Phys Lett. 10.1063/1.2216889
Stoukatch S, Dupont F, Seronveaux L, Vandormael D, Kraft M (2018) Additive low temperature 3D printed electronic as enabling technology for IoT application. In: 2017 IEEE 19th electronics packaging technology conference, EPTC 2017, vol 2018. Institute of Electrical and Electronics Engineers Inc., pp 1–6. 10.1109/EPTC.2017.8277554
Thiruvenkatanathan P, Yan J, Seshia AA (2009a) Common mode rejection in electrically coupled MEMS resonators utilizing mode localization for sensor applications. In: 2009 IEEE international frequency control symposium joint with the 22nd European frequency and time forum, pp 358–363. 10.1109/FREQ.2009.5168201
Thiruvenkatanathan P, Yan J, Woodhouse J, Seshia AA (2009b) Enhancing parametric sensitivity in electrically coupled MEMS resonators. J Microelectromechanical Syst. 10.1109/jmems.2009.2025999
Tsutsumi N, Hirota J, Kinashi K, Sakai W (2017) Direct laser writing for micro-optical devices using a negative photoresist. Opt Express. 10.1364/oe.25.031539
Vaithilingam J, Saleh E, Körner L et al (2018) 3-Dimensional inkjet printing of macro structures from silver nanoparticles. Mater Des. 10.1016/j.matdes.2017.10.070
Vescio G, López-Vidrier J, Leghrib R et al (2016) Flexible inkjet printed high-k HfO2-based MIM capacitors. J Mater Chem C. 10.1039/c5tc03307a
Wang Y, Zhao C, Wang C, Cerica D, Baijot M, Pachkawade V, Ghorbani A, Boutier M, Vanderplasschen A, Kraft M (2017) A reversible method to characterize the mass sensitivity of a 3-Dof mode localized coupled resonator under atmospheric pressure, proceedings. 10.3390/proceedings1040493
Wang Y, Zhao C, Wang C et al (2018) A mass sensor based on 3-DOF mode localized coupled resonator under atmospheric pressure. Sens Actuators A Phys. 10.1016/j.sna.2018.06.028
Wei J, Ye Y, Sun Z et al (2016) Control of the kerf size and microstructure in Inconel 738 superalloy by femtosecond laser beam cutting. Appl Surf Sci. 10.1016/j.apsusc.2016.02.162
Yokota T, Nakano S, Sekitani T, Someya T (2008) Plastic complementary microelectromechanical switches. Appl Phys Lett. 10.1063/1.2959644
Zhang H, Huang J, Yuan W, Chang H (2016) A high-sensitivity micromechanical electrometer based on mode localization of two degree-of-freedom weakly coupled resonators. J Microelectromechanical Syst. 10.1109/jmems.2016.2598780
Zhao C, Wood GS, Xie J et al (2016) A three degree-of-freedom weakly coupled resonator sensor with enhanced stiffness sensitivity. J Microelectromechanical Syst. 10.1109/jmems.2015.2490204
