Boman Romain

Département d'aérospatiale et mécanique

A&M

See author's contact details
ORCID
0000-0002-4883-0383
Main Referenced Co-authors
Ponthot, Jean-Philippe  (145)
Papeleux, Luc  (50)
Terrapon, Vincent  (16)
Legrand, Nicolas (14)
Laugier, Maxime (13)
Main Referenced Keywords
ALE formalism (22); éléments finis (19); simulation numérique (18); Finite Element Method (14); finite element method (14);
Main Referenced Unit & Research Centers
A&M - Aérospatiale et Mécanique - ULiège [BE] (6)
Thermodynamique des Phénomènes Irréversibles (3)
LTAS-MN2L (2)
Thermodynamique des Phénomènes Irréversibles (TPI) (2)
Laboratoire de Mécanique Numérique Non Linéaire (MN²L) (1)
Main Referenced Disciplines
Mechanical engineering (127)
Materials science & engineering (51)
Engineering, computing & technology: Multidisciplinary, general & others (28)
Aerospace & aeronautics engineering (16)
Computer science (6)

Publications (total 198)

The most downloaded
5018 downloads
Boman, R. (1997). Méthodes itératives pour la résolution de grands systèmes non linéaires [Master’s dissertation, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/13575 https://hdl.handle.net/2268/13575

The most cited

75 citations (Scopus®)

Chiu, L. N. S., Falzon, B. G., Boman, R., Chen, B., & Yan, W. (November 2015). Finite element modelling of composite structures under crushing load. Composite Structures, 131, 215–228. doi:10.1016/j.compstruct.2015.05.008 https://hdl.handle.net/2268/181562

Bobach, B.-J., Boman, R., Carbonell, J. M., Papeleux, L., Fernandez Sanchez, E. F., & Ponthot, J.-P. (2024). A Unified Thermo-Fluid–Solid Formulation for FSI and Phase Change Problems Based on the Particle Finite Element Method. International Journal of Computational Methods. doi:10.1142/s0219876223420082
Peer Reviewed verified by ORBi

Lacroix, M., Février, S., Fernandez Sanchez, E. F., Papeleux, L., Boman, R., & Ponthot, J.-P. (February 2024). A comparative study of interpolation algorithms on non-matching meshes for PFEM-FEM fluid-structure interactions. Computers and Mathematics with Applications, 155, 51-65. doi:10.1016/j.camwa.2023.11.045
Peer reviewed

Chatar, N., Boman, R., Fischer, V., Segura, V., Julémont, C., & Tseng, J. (2024). Growing sabers: Mandibular shape and biomechanical performance trajectories during the ontogeny of Smilodon fatalis. Anatomical Record. doi:10.1002/ar.25504
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., Tianyu Zhang, Bobach, B.-J., Papeleux, L., Février, S., Lacroix, M., Boman, R., & Ponthot, J.-P. (December 2023). Simulation of the Friction Melt Bonding (FMB) process using the FEM + PFEM [Paper presentation]. Workshop on Friction Stir based processes, Louvain-la-Neuve, Belgium.
Peer reviewed

Lacroix, M., Février, S., Fernandez Sanchez, E. F., Papeleux, L., Boman, R., & Ponthot, J.-P. (10 October 2023). Comparison of Interpolation Algorithms on Non-Matching Meshes for Partitioned Thermo-Mechanical Fluid-Structure Interactions [Paper presentation]. 9th International Conference on Particle-Based Methods, Milan, Italy.
Editorial reviewed

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Papeleux, L., Boman, R., & Ponthot, J.-P. (June 2023). A new remeshing strategy relying on level-set functions for the Particle Finite Element Method [Paper presentation]. International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), Chania, Greece.
Peer reviewed

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2023). Efficient Roll-Forming Simulation Using Non-Conformal Meshes with Hanging Nodes Handled by Lagrange Multipliers. Metals. doi:10.3390/met13050895
Peer Reviewed verified by ORBi

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., Papeleux, L., & Ponthot, J.-P. (2023). A particle finite element method based on Level–Set functions. Journal of Computational Physics, 112187. doi:10.1016/j.jcp.2023.112187
Peer Reviewed verified by ORBi

Crovato, A., Prado, A. P., Cabral, P. H., Boman, R., Terrapon, V., & Dimitriadis, G. (April 2023). A discrete adjoint full potential formulation for fast aerostructural optimization in preliminary aircraft design. Aerospace Science and Technology, 138. doi:10.1016/j.ast.2023.108332
Peer Reviewed verified by ORBi

Chatar, N., Boman, R., Fallon Gaudichon, V., MacLaren, J. A., & Fischer, V. (2023). ‘Fossils’: A new, fast and open-source protocol to simulate muscle-driven biomechanical loading of bone. Methods in Ecology and Evolution. doi:10.1111/2041-210X.14051
Peer Reviewed verified by ORBi

Falla, R., Bobach, B.-J., Boman, R., Ponthot, J.-P., & Terrapon, V. (2023). Mesh adaption for two-dimensional bounded and free-surface flows with the particle finite element method. Computational Particle Mechanics. doi:10.1007/s40571-022-00541-2
Peer reviewed

Février, S., Boman, R., & Ponthot, J.-P. (02 September 2022). Particle Finite Element Method for simulations of Selective Laser Melting with vaporization [Paper presentation]. ACOMEN Congress 2022, Liège, Belgium.
Editorial reviewed

Bobach, B.-J., Boman, R., Celentano, D., Terrapon, V., & Ponthot, J.-P. (02 September 2022). Towards a PFEM-based unified thermo-fluid-solid simulation tool for phase change problems [Paper presentation]. 8th international conference on "Advanced COmputational Methods in ENgineering", Liège, Belgium.
Editorial reviewed

Lacroix, M., Février, S., Boman, R., Remacle, J.-F., & Ponthot, J.-P. (01 September 2022). Particle Finite Element Method (PFEM) for 2D/3D Fluid-Structure Interactions, Including Contact Interactions [Paper presentation]. 8th International Conference on Advanced Computational Methods in Engineering, Liège, Belgium.
Editorial reviewed

Tanaka Nunes, G., Papeleux, L., Boman, R., Martiny, P., Adam, L., & Ponthot, J.-P. (31 August 2022). Using FEM and a crack band model with damaged induced anisotropy to predict damage on continuous fiber ceramic matrix composites [Paper presentation]. ACOMEN.

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., & Ponthot, J.-P. (2022). Generalized-alpha scheme in the PFEM for velocity-pressure and displacement-pressure formulations of the incompressible Navier-Stokes equations. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.7101
Peer Reviewed verified by ORBi

Février, S., Boman, R., & Ponthot, J.-P. (09 June 2022). Particle Finite Element Method for simulations of Selective Laser Melting with vaporization [Paper presentation]. ECCOMAS Congress 2022, Oslo, Norway.
Editorial reviewed

Lacroix, M., Février, S., Boman, R., Remacle, J.-F., & Ponthot, J.-P. (06 June 2022). Particle Finite Element Method for 2D/3D Fluid-Structure Interactions, Including Contact Interactions [Paper presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering, Oslo, Norway.
Editorial reviewed

Fernandez Sanchez, E. F., Février, S., Lacroix, M., Boman, R., & Ponthot, J.-P. (07 January 2022). Application of the Generalized-alpha time integration scheme in PFEM for solving the incompressible Navier-Stokes equations [Paper presentation]. European Community on Computational Methods in Applied Sciences (ECCOMAS), Oslo, Norway.
Peer reviewed

Crovato, A., Boman, R., Terrapon, V., Dimitriadis, G., Prado, A., & Cabral, P. (2022). FAST FULL POTENTIAL BASED AEROSTRUCTURAL OPTIMIZATION CALCULATIONS FOR PRELIMINARY AIRCRAFT DESIGN. In Proceedings of the 19th International Forum on Aeroelasticity and Structural Dynamics. International Forum on Aeroelasticity and Structural Dynamics.
Editorial reviewed

Chatar, N., Boman, R., Fallon Gaudichon, V., Maclaren, J., Goyens, J., & Fischer, V. (2022). A new, high-speed protocol to run muscle-driven biomechanical simulations trough finite element analyses [Poster presentation]. XIX Annual Conference of the European Association of Vertebrate Palaeontologists, Benevento, Italy. doi:10.18563/pv.eavp2022
Editorial reviewed

Boemer, D., Carretta, Y., Laugier, M., Legrand, N., Papeleux, L., Boman, R., & Ponthot, J.-P. (October 2021). An advanced model of lubricated cold rolling with its comprehensive pilot mill validation. Journal of Materials Processing Technology, 296. doi:10.1016/j.jmatprotec.2021.117175
Peer Reviewed verified by ORBi

Fallon Gaudichon, V., Boman, R., Chatar, N., Maclaren, J., & Fischer, V. (07 September 2021). Uncovering the biomechanical disparity of Cretaceous marine reptile feeding via finite element analysis [Paper presentation]. 69th Symposium on Vertebrate Palaeontology and Comparative Anatomy, Oxford, United Kingdom.

Bobach, B.-J., Falla, R., Boman, R., Terrapon, V., & Ponthot, J.-P. (2021). Phase change driven adaptive mesh refinement in PFEM. In ESAFORM 2021: proceedings of the 24th International Conference on Material Forming : 14-16 April 2021. doi:10.25518/esaform21.3861
Peer reviewed

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (2021). Element activation method and non-conformal dynamic remeshing strategy to model additive manufacturing. In ESAFORM 2021: proceedings of the 24th International Conference on Material Forming : 14-16 April 2021. doi:10.25518/esaform21.2320
Peer reviewed

Bobach, B.-J., Boman, R., Celentano, D., Terrapon, V., & Ponthot, J.-P. (2021). Simulation of the Marangoni Effect and Phase Change Using the Particle Finite Element Method. Applied Sciences, 11 (11893). doi:10.3390/app112411893
Peer Reviewed verified by ORBi

Liegeois, K., Boman, R., Phipps, E. T., Wiesner, T. A., & Arnst, M. (01 September 2020). GMRES with embedded ensemble propagation for the efficient solution of parametric linear systems in uncertainty quantification of computational models. Computer Methods in Applied Mechanics and Engineering, 369. doi:10.1016/j.cma.2020.113188
Peer Reviewed verified by ORBi

Crovato, A., Almeida, H., Vio, G., Silva, G., Prado, A., Breviglieri, C., Güner, H., Cabral, P., Boman, R., Terrapon, V., & Dimitriadis, G. (11 April 2020). Effect of Levels of Fidelity on Steady Aerodynamic and Static Aeroelastic Computations. Aerospace, II. doi:10.3390/aerospace7040042
Peer Reviewed verified by ORBi

Mertens, P., Boman, R., Dickheuer, S., Krasikov, Y., Krimmer, A., Leichtle, D., Liegeois, K., Linsmeier, C., Litnovsky, A., Marchuk, O., Rasinski, M., & De Bock, M. (September 2019). On the use of rhodium mirrors for optical diagnostics in ITER. Fusion Engineering and Design, 146 (part B), 2514-2518. doi:10.1016/j.fusengdes.2019.04.031
Peer Reviewed verified by ORBi

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (September 2019). Addition of a finite element activation method in an existing thermomechanical finite element code to model additive manufacturing [Paper presentation]. Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), Pavia, Italy.

Liegeois, K., Boman, R., Phipps, E., Mertens, P., Krasikov, Y., & Arnst, M. (25 June 2019). Ensemble propagation for efficient uncertainty quantification: Application to the thermomechanical modeling of a first mirror for the ITER core CXRS diagnostics [Paper presentation]. UNCECOMP 2019 / 3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering.

Boemer, D., Carretta, Y., Boman, R., Papeleux, L., Legrand, N., Laugier, M., & Ponthot, J.-P. (03 June 2019). Coupling procedure of a cold rolling lubrication model with finite element asperity flattening [Paper presentation]. 8th International Conference on Coupled Problems in Science and Engineering, Sitges, Spain.

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (27 May 2019). Element activation strategy for Additive Manufacturing, based on the element deletion algorithm [Poster presentation]. 4th Workshop on Metal Additive Manufacturing, KU Leuven, Leuven, Belgium.

Liegeois, K., Boman, R., Phipps, E., & Arnst, M. (25 April 2019). Efficient parametric computations using ensemble propagation for high dimensional finite element models [Paper presentation]. CÉCI Scientific Meeting.

Liegeois, K., Boman, R., Phipps, E., & Arnst, M. (28 February 2019). Ensemble Propagation for Efficient Uncertainty Quantification of Mechanical Contact Problems [Paper presentation]. SIAM Conference on Computational Science and Engineering.

Boemer, D., Carretta, Y., Boman, R., Ponthot, J.-P., & Papeleux, L. (13 February 2019). Advances in cold rolling modeling at ULiège [Paper presentation]. Modélisation numérique du laminage à froid lubrifié en lubrification flexible, Maizières-lès-Metz, France.

Cerquaglia, M. L., Thomas, D., Boman, R., Terrapon, V., & Ponthot, J.-P. (2019). A fully partitioned Lagrangian framework for FSI problems characterized by free surfaces, large solid deformations and displacements, and strong added-mass effects. Computer Methods in Applied Mechanics and Engineering, 348, 409-442. doi:10.1016/j.cma.2019.01.021
Peer Reviewed verified by ORBi

Thomas, D., Cerquaglia, M. L., Boman, R., Economon, T., Alonso, J., Dimitriadis, G., & Terrapon, V. (2019). CUPyDO - An integrated Python environment for coupled fluid-structure simulations. Advances in Engineering Software. doi:10.1016/j.advengsoft.2018.05.007
Peer Reviewed verified by ORBi

Crovato, A., Boman, R., Güner, H., Dimitriadis, G., Terrapon, V., Almeida, H., Prado, A., Breviglieri, C., Cabral, P., & Silva, G. (2019). A Full Potential Static Aeroelastic Solver for Preliminary Aircraft Design. In Proceedings of the 18th International Forum on Aeroelasticity and Structural Dynamics (IFASD2019). International Forum on Aeroelasticity and Structural Dynamics.
Editorial reviewed

Bruchon, J., Bergheau, J.-M., & Boman, R. (Eds.). (November 2018). Computational methods in welding and additive manufacturing. Comptes Rendus Mécanique, 346 (11), 997-1122. doi:10.1016/j.crme.2018.08.009
Peer Reviewed verified by ORBi

Thomas, D., Cerquaglia, M. L., Boman, R., Dimitriadis, G., & Terrapon, V. (13 September 2018). Demonstration of a unified and flexible coupling environment for nonlinear fluid-structure interaction [Paper presentation]. Collaborative Conference on Physics Series, CCPS 2018, Barcelona, Spain.

Boman, R., Papeleux, L., & Ponthot, J.-P. (29 August 2018). Effective development of a finite-element solver at the University [Paper presentation]. ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Tarbes, France.

Arnst, M., Ponthot, J.-P., & Boman, R. (August 2018). Comparison of stochastic and interval methods for uncertainty quantification of metal forming processes. Comptes Rendus Mécanique, 346 (8), 634-646. doi:10.1016/j.crme.2018.06.007
Peer Reviewed verified by ORBi

Boutenel, F., Delhomme, M., Velay, V., & Boman, R. (August 2018). Finite element modelling of cold drawing for high-precision tubes. Comptes Rendus Mécanique, 346 (8), 665-677. doi:10.1016/j.crme.2018.06.005
Peer Reviewed verified by ORBi

Laruelle, C., Boman, R., Papeleux, L., & Ponthot, J.-P. (28 May 2018). Finite Element activation strategy in the numerical simulation of Additive Manufacturing Processes [Poster presentation]. 3rd Workshop on Metal Additive Manufacturing, Liège, Liège, Belgium.

Liegeois, K., Boman, R., Phipps, E., Wiesner, T., & Arnst, M. (17 April 2018). On the Ensemble Propagation for Efficient Uncertainty Quantification of Mechanical Contact Problems [Paper presentation]. SIAM Conference on Uncertainty Quanti cation 2018.

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (April 2018). Continuous roll forming including in-line welding and post-cut within an ALE formalism. Finite Elements in Analysis and Design, 143, 11-31. doi:10.1016/j.finel.2018.01.005
Peer Reviewed verified by ORBi

Carretta, Y., Hunter, A., Boman, R., Ponthot, J.-P., Legrand, N., Laugier, M., & Dwyer-Joyce, R. (2018). Ultrasonic roll bite measurements in cold rolling: Contact length and strip thickness. Proceedings of the Institution of Mechanical Engineers. Part J, Journal of Engineering Tribology, 232 (2), 179-192. doi:10.1177/1350650117712314
Peer Reviewed verified by ORBi

Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (2018). Thermomechanical simulations of blanking process operated over a wide range of punch velocities. Journal of Physics. Conference Series, 1063, 012014. doi:10.1088/1742-6596/1063/1/012014
Peer Reviewed verified by ORBi

Arnst, M., Abello Álvarez, B., Ponthot, J.-P., & Boman, R. (15 November 2017). Itô-SDE MCMC method for Bayesian characterization of errors associated with data limitations in stochastic expansion methods for uncertainty quantification. Journal of Computational Physics, 349, 59-79. doi:10.1016/j.jcp.2017.08.005
Peer Reviewed verified by ORBi

Carretta, Y., Hunter, A., Boman, R., Ponthot, J.-P., Legrand, N., Laugier, M., & Dwyer-Joyce, R. (November 2017). Ultrasonic roll bite measurements in cold rolling - roll stress and deformation. Journal of Materials Processing Technology, 249, 1-13. doi:10.1016/j.jmatprotec.2017.05.036
Peer Reviewed verified by ORBi

Liegeois, K., Boman, R., Mertens, P., Panin, A., Phipps, E., & Arnst, M. (19 July 2017). Ensemble propagation for efficient uncertainty quantification on emerging architectures: Application to thermomechanical contact [Poster presentation]. Quantification of Uncertainty: Improving Efficiency and Technology, Trieste, Italy.

Wautelet, G., Boman, R., & Ponthot, J.-P. (05 July 2017). On some Improvements of the Augmented Lagrangian Treatment for Solving Frictional Contact Problems [Paper presentation]. 5th International Conference on Computational Contact Mechanics, Lecce, Italy.

Cerquaglia, M. L., Boman, R., Deliège, G., Papeleux, L., & Ponthot, J.-P. (14 June 2017). PFEM-FEM coupling for fluid-structure interaction problems involving free surfaces and large solid deformations [Paper presentation]. VII International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2017).

Carretta, Y., Bech, J., Legrand, N., Laugier, M., Ponthot, J.-P., & Boman, R. (June 2017). Numerical modelling of micro-plasto-hydrodynamic lubrication in plane strip drawing. Tribology International, 110, 378-391. doi:10.1016/j.triboint.2016.10.046
Peer Reviewed verified by ORBi

Thomas, D., Variyar, A., Boman, R., Economon, T. D., Alonso, J. J., Dimitriadis, G., & Terrapon, V. (2017). Staggered strong coupling between existing fluid and solid solvers through a Python interface for fluid-structure interaction problems. In Proceedings of the VII International Conference on Coupled Problems in Science and Engineering.
Peer reviewed

Carretta, Y., Bech, J., Legrand, N., Laugier, M., Boman, R., & Ponthot, J.-P. (February 2017). Numerical modelling of microscopic lubricant flow in sheet metal forming. Application to plane strip drawing. International Journal for Numerical Methods in Engineering, 112, 203-237. doi:10.1002/nme.5509
Peer Reviewed verified by ORBi

Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., & Ponthot, J.-P. (2017). The particle finite element method for the numerical simulation of bird strike. International Journal of Impact Engineering. doi:10.1016/j.ijimpeng.2017.05.014
Peer Reviewed verified by ORBi

Cerquaglia, M. L., Deliège, G., Boman, R., & Ponthot, J.-P. (2017). Preliminary assessment of the possibilities of the Particle Finite Element Method in the numerical simulation of bird impact on aeronautical structures. Procedia Engineering, 173, 101-108. doi:10.1016/j.proeng.2016.12.043
Peer Reviewed verified by ORBi

Agelet de Saracibar, C., Boman, R., Bussetta, P., Cajas, J. C., Cervera, M., Chiumenti, M., Coll, A., Dadvand, P., Hernández Ortega, J., Houzeaux, G., Pasenau de Riera, M. Á., & Ponthot, J.-P. (2017). Numerical Methods. In G. Schmitz & U. Prahl (Eds.), Handbook of Software Solutions for ICME (pp. 487-531). Springer.

Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (December 2016). Application of Uncoupled Damage Models to Predict Ductile Fracture in Sheet Metal Blanking. Key Engineering Materials, 725, 483-488. doi:10.4028/www.scientific.net/KEM.725.483
Peer Reviewed verified by ORBi

Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (December 2016). Application of uncoupled damage models to predict ductile fracture in sheet metal blanking [Paper presentation]. 13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications - AEPA2016, Hiroshima, Japan.

Boman, R. (2016). Développer du code avec une équipe de "non-geeks" à l'ULg [Paper presentation]. Geeks Anonymes, Liège, Belgium.

Cerquaglia, M. L., Deliège, G., Boman, R., & Ponthot, J.-P. (09 June 2016). Two novel ways to impose free-slip boundary conditions in fluid-structure interaction problems using the Particle Finite Element Method [Paper presentation]. ECCOMAS 2016.

Arnst, M., Liegeois, K., Boman, R., & Ponthot, J.-P. (18 May 2016). Comparison of interval and stochastic methods for uncertainty quantification in metal forming [Paper presentation]. ICOMP International Conference on COmputational methods in Manufacturing Processes.

Canales Cardenas, C., Boman, R., & Ponthot, J.-P. (May 2016). Thermomechanical simulation of blanking operated at high punch velocities [Paper presentation]. 2nd International conference on COmputational methods in Manufacturing Processes - ICOMP’2016, Liège, Belgium.

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (April 2016). Lagrangian and arbitrary Lagrangian Eulerian simulations of complex roll-forming processes. Comptes Rendus Mécanique, 344 (4-5), 251-266. doi:10.1016/j.crme.2016.02.005
Peer Reviewed verified by ORBi

Mengoni, M., Ponthot, J.-P., & Boman, R. (February 2016). Mesh Management Methods in Finite Element Simulations of Orthodontic Tooth Movement. Medical Engineering and Physics, 38 (2), 140-147. doi:10.1016/j.medengphy.2015.11.005
Peer Reviewed verified by ORBi

Cerquaglia, M. L., Deliège, G., Boman, R., Terrapon, V., & Ponthot, J.-P. (2016). Free-slip boundary conditions for simulating free-surface incompressible flows through the Particle Finite Element Method. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.5439
Peer Reviewed verified by ORBi

Bussetta, P., Feulvarch, E., Tongne, A., Boman, R., Bergheau, J.-M., & Ponthot, J.-P. (2016). Two 3D thermomechanical numerical models of friction stir welding processes with a trigonal pin. Numerical Heat Transfer. Part A, Applications, 70 (9), 995-1008. doi:10.1080/10407782.2016.1214498
Peer Reviewed verified by ORBi

Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017
Peer Reviewed verified by ORBi

Chiu, L. N. S., Falzon, B. G., Boman, R., Chen, B., & Yan, W. (November 2015). Finite element modelling of composite structures under crushing load. Composite Structures, 131, 215–228. doi:10.1016/j.compstruct.2015.05.008
Peer Reviewed verified by ORBi

Bussetta, P., Dialami, Chiumenti, M., Agelet de Saracibar, C., Cervera, M., Boman, R., & Ponthot, J.-P. (November 2015). 3D numerical models using a fluid or a solid formulation of FSW processes with non-cylindrical pin. Advanced Modeling and Simulation in Engineering Sciences, 2 (27). doi:10.1186/s40323-015-0048-2
Peer Reviewed verified by ORBi

Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (28 September 2015). On some drawbacks and possible improvements of a Lagrangian Finite Element method for simulating incompressible flows [Paper presentation]. Particles 2015.

Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (08 September 2015). On some drawbacks and possible improvements of a Particle Finite Element Method for simulating incompressible flows [Paper presentation]. 8th International Workshop on Meshfree Methods.

Canales Cardenas, C., Boman, R., Bussetta, Habraken, A., & Ponthot, J.-P. (July 2015). Comparison of fracture prediction models on sheet metal blanking simulations [Paper presentation]. 4th International Conference on Computational Modeling of Fracture and Failure - CFRAC 2015, Cachan, France.

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (July 2015). Lagrangian and Arbitrary Lagrangian Eulerian Simulations of Complex Roll Forming Processes [Paper presentation]. 9th European Solid Mechanics Conference (ESMC 2015), Madrid, Spain.

Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (June 2015). A Low-Cost Digital Image Correlation Technique for Characterising the Shear Deformation of Fabrics for Draping Studies. Strain, 51 (3), 180-189. doi:10.1111/str.12131
Peer Reviewed verified by ORBi

Arnst, M., Abello Álvarez, B., Boman, R., & Ponthot, J.-P. (26 May 2015). Parametric uncertainty quantification in the presence of modeling errors: Bayesian approach and application to metal [Paper presentation]. UNCECOMP International Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crète, Greece.

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2015). Simulations lagrangienne et arbitraire lagrangienne eulérienne du procédé de profilage. In Actes du 12e Colloque National en Calcul des Structures.

Canales Cardenas, C., Boman, R., Bussetta, P., & Ponthot, J.-P. (April 2015). Numerical prediction of resulting rollover shapes and sheared edges after blanking process [Paper presentation]. 1st. Pan-American Congress on Computational Mechanics, Buenos Aires, Argentina.

Cerquaglia, M. L., Deliège, G., Boman, R., Papeleux, L., Terrapon, V., & Ponthot, J.-P. (2015). On some drawbacks and possible improvements of a Lagrangian finite element approach for simulating incompressible flows. In E. Oñate, M. Bischoff, D. R. J. Owen, P. Wriggers, ... T. Zohdi, Proceedings of the IV International Conference on Particle-Based Methods – Fundamentals and Applications. Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).

Hubert, C., Dubois, A., Dubar, L., Laugier, M., Legrand, N., Boman, R., Ponthot, J.-P., & Carretta, Y. (2015). Complementary approaches for the numerical simulation of the Micro- Plasto-Hydrodynamic Lubrication regime. Key Engineering Materials, 651-653, 492-497. doi:10.4028/www.scientific.net/KEM.651-653.492
Peer Reviewed verified by ORBi

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (2015). Simulations lagrangienne et arbitraire lagrangienne eulérienne du procédé de profilage. In CSMA 2015 - 12e Colloque National en Calcul des Structures.

Bussetta, P., Boman, R., & Ponthot, J.-P. (2015). Efficient 3D transfer operators based on numerical integration. International Journal for Numerical Methods in Engineering, 102 (3-4), 892-929. doi:10.1002/nme.4821
Peer Reviewed verified by ORBi

Boman, R., & Ponthot, J.-P. (November 2014). Metafor - Object Oriented Finite Element Code for the Simulation of Large Deformations of Solids [Poster presentation]. EU-US Frontiers of Engineering Symposium, Seattle, Washington, United States.

Crutzen, Y., Boman, R., Papeleux, L., & Ponthot, J.-P. (September 2014). Lagrangian and Arbitrary Lagrangian Eulerian Simulations of Stationary and Non-Stationary Roll Forming Processes [Paper presentation]. 1st International conference on COmputational methods in Manufacturing Processes (ICOMP'2014), Saint-Étienne, France.

Laugier, M., Boman, R., Legrand, N., Ponthot, J.-P., Tornicelli, M., Bech, J., & Carretta, Y. (June 2014). Micro-plasto-hydrodynamic lubrication: a fundamental mechanism in cold rolling. Advanced Materials Research, 966-967, 228-241. doi:10.4028/www.scientific.net/AMR.966-967.228
Peer reviewed

Boman, R. (16 May 2014). Numerical simulation of nonlinear mechanical problems using Metafor [Paper presentation]. Sixth CÉCI Scientific Meeting, Bruxelles, Belgium.

Boman, R., Koeune, R., & Ponthot, J.-P. (2014). Numerical Simulation of Double Cup Extrusion Test Using the Arbitrary Lagrangian Eulerian Formalism. In S. R. Idelsohn (Ed.), Numerical Simulations of Coupled Problems in Engineering (pp. 29-53). Switzerland: Springer. doi:10.1007/978-3-319-06136-8_2
Peer reviewed

Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (May 2014). Implementation of a non-orthogonal constitutive model for the finite element simulation of textile composite draping. Applied Mechanics and Materials, 553, 76-81. doi:10.4028/www.scientific.net/AMM.553.76
Peer reviewed

Bussetta, P., Dialami, N., Boman, R., Chiumenti, M., Agelet de Saracibar, C., Cervera, M., & Ponthot, J.-P. (2014). Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non‐Cylindrical Pin. Steel Research International, 85 (6), 968-979. doi:10.1002/srin.201300182
Peer Reviewed verified by ORBi

Bouffioux, C., Boman, R., Caillet, N., Rich, N., Ponthot, J.-P., & Habraken, A. (2014). Effect of the kinematic hardening in the simulations of the straightening of long rolled profiles. Key Engineering Materials, 611-612, 178-185. doi:10.4028/www.scientific.net/KEM.611-612.178
Peer Reviewed verified by ORBi

Boman, R., & Ponthot, J.-P. (16 December 2013). Arbitrary Lagrangian Eulerian simulations of stationary and non-stationary metal forming processes. AIP Conference Proceedings, 1567, 762-767. doi:10.1063/1.4850082
Peer Reviewed verified by ORBi

Ponthot, J.-P., Boman, R., Jeunechamps, P.-P., Papeleux, L., & Deliège, G. (December 2013). An implicit erosion algorithm for the numerical simulation of metallic and composite materials submitted to high strain rate. Proceedings of Indian National Science Academy, 79/4 (Part A), 519-528. doi:10.16943/ptinsa/2013/v79i4/47987
Peer Reviewed verified by ORBi

Rossi, B., Degée, H., & Boman, R. (15 September 2013). Numerical simulation of the Roll forming of thin-walled sections and evaluation of corner strength enhancement. Finite Elements in Analysis and Design, 72, 13-20. doi:10.1016/j.finel.2013.04.002
Peer Reviewed verified by ORBi

Chiu, L. N. S., Falzon, B. G., Boman, R., Chen, B., & Yan, W. (2013). Verification of a novel material model to predict damage in composite structures. In International Conference on Structural Integrity and Fracture.
Peer reviewed

Pierce, R. S., Falzon, B. G., Thompson, M. C., & Boman, R. (2013). Contributions to the process modelling of resin infusion under flexible tooling (RIFT) manufacturing for composite aerostructures. In Proceedings of ICCM19.
Peer reviewed

Boman, R., Koeune, R., & Ponthot, J.-P. (2013). Numerical Simulation of Double Cup Extrusion Test using the Arbitrary Lagrangian Eulerian Formalism. In Proceedings of Coupled Problems 2013.
Peer reviewed

Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (June 2013). Numerical simulations of asperity crushing using boundary conditions encountered in cold-rolling. Key Engineering Materials, 554-557, 850-857. doi:10.4028/www.scientific.net/KEM.554-557.850
Peer Reviewed verified by ORBi

Bussetta, P., Dialami, N., Boman, R., Chiumenti, M., Agelet de Saracibar, C., Cervera, M., & Ponthot, J.-P. (2013). Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin. In Proceedings of "V International Conference on Computational Methods for Coupled Problems in Science and Engineering".

Boman, R., & Ponthot, J.-P. (March 2013). Enhanced ALE Data Transfer Strategy for Explicit and Implicit Thermomechanical Simulations of High-Speed Processes. International Journal of Impact Engineering, 53, 62-73. doi:10.1016/j.ijimpeng.2012.08.007
Peer Reviewed verified by ORBi

Pierce, R. S., Falzon, B. G., & Boman, R. (2013). Relating Local Permeability Changes to the Deformation of Preforms during the Manufacture of Complex-Shaped Composite Structures. In Proceedings of the 15th Australian Aeronautical Conference.
Peer reviewed

Chiu, L. N. S., Falzon, B. G., & Boman, R. (2013). A Continuum Damage Mechanics Model for the Analysis of the Crashworthiness of Composite Structures: A work in progress. In Proceedings of the 15th Australian Aeronautical Conference.

Ponthot, J.-P., Koeune, R., & Boman, R. (2013). A continuous fluid/solid transition model for semi-solid material modeling. Application to thixoforging. In 33° SENAFOR (CD) (pp. 08).

Boman, R., & Ponthot, J.-P. (07 December 2012). Efficient ALE mesh management for 3D quasi-Eulerian problems. International Journal for Numerical Methods in Engineering, 92 (10), 857-890. doi:10.1002/nme.4361
Peer Reviewed verified by ORBi

Boman, R., Parrico, A., Legrand, N., & Ponthot, J.-P. (October 2012). Arbitrary Lagrangian Eulerian Modelling of Tension Levelling. Matériaux et Techniques, 100 (Hors série 2012), 40-42.

Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (October 2012). Three-dimensional Modelling of Asperity Crushing [Paper presentation]. Journées Annuelles de la SF2M 2012, Paris, France.

Boman, R., & Ponthot, J.-P. (2012). ALE Simulations of Metal Forming Processes. In Akhtar S. Khan, Farhoud Kabirian, ... Jian Liu (Eds.), Non-linear Response of Conventional & Advanced Materials, and Multi-scale Modeling (pp. 40-42). NEAT Press.
Peer reviewed

Carretta, Y., Boman, R., Legrand, N., Laugier, M., & Ponthot, J.-P. (2012). Mixed Lubrication Regime in Cold Strip Rolling. In 2nd Annual ArcelorMittal CFD and Thermomechanics Days 2012.

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2012). Generating smooth surface meshes from multi-region medical images. International Journal for Numerical Methods in Biomedical Engineering, 28 (6-7), 642-660. doi:10.1002/cnm.1471
Peer Reviewed verified by ORBi

D'Otreppe, V., Mengoni, M., Boman, R., & Ponthot, J.-P. (14 November 2011). Image-based Finite Element Mesh Generation for Microstructures [Paper presentation]. Fifth International Conference on Advanced COmputational Methods in ENgineering (ACOMEN 2011), Liège, Belgium.

Bussetta, P., Boman, R., & Ponthot, J.-P. (2011). Comparison of Data Transfer Methods between Meshes in the Frame of the Arbitrary Lagrangian Eulerien Formalism. In Proceedings of "Fifth International Conference on Advanced COmputationalMethods in ENgineering".

Rossi, B., Boman, R., & Degée, H. (2011). Effects of the roll forming process on the mechanical properties of thin-walled sections made of non linear metallic materials. In Proceedings of the 6th International Conference on Thin Walled Structures: ICTWS2011, Timisoara 5-7 September 2011 (pp. 633-640).
Peer reviewed

Carretta, Y., Boman, R., Stephany, A., Legrand, N., Laugier, M., & Ponthot, J.-P. (September 2011). METALUB – A Slab Method Software for the Numerical Simulation of Mixed Lubrication Regime in Cold Strip Rolling. Proceedings of the Institution of Mechanical Engineers. Part J, Journal of Engineering Tribology, 225 (9), 894-904. doi:10.1177/1350650111410126
Peer Reviewed verified by ORBi

Boman, R., & Ponthot, J.-P. (2011). Numerical Simulation of Stationary Roll Forming using ALE formalism. In E. Oñate, D. R. J. Owen, D. Peric, ... B. Suàrez (Eds.), Computational Plasticity XI - Fundamentals and Applications.

Boman, R., & Ponthot, J.-P. (2011). Continuous Metal Forming Process Simulation using the Arbitrary Lagrangian Eulerian Formulation. Steel Research International, 367-372.
Peer Reviewed verified by ORBi

Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (05 July 2011). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber [Poster presentation]. XXIIIrd congress of the International Society of Biomechanics, Brussels, Belgium.

Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2011). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber. In XXIIIrd congress of the International Society of Biomechanics, July 3-7, 2011 (pp. 208). Brussels, Belgium: International Society of Biomechanics.
Peer reviewed

Jeunechamps, P.-P., Boman, R., Papeleux, L., & Ponthot, J.-P. (2011). Damage and Fracture of Materials Submitted to High Strain Rates. A Thermomechanically Implicit Coupled Approach with Element Erosion. In Proceedings of the 3rd International Conference on Impact Loading of Lightweight Structures.

Carretta, Y., Boman, R., Stephany, A., Bouache, T., Canivenc, R., Montmitonnet, P., Legrand, N., Laugier, M., & Ponthot, J.-P. (2011). Thermomechanical simulation of roll forming process based on the coupling of two independent solvers. In Proceedings of the IV International Conference on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2011.
Peer reviewed

Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (01 June 2011). Influence of thermoelectric coupling on pacemaker activity generated by mechano-electric feedback in a one-dimensional ring-shaped model of cardiac fiber [Poster presentation]. 2011 NHLBI /VCU - World Congress on Mathematical Modeling and Computational Simulation of Cardio vascular and Cardiopulmonary Dynamics, Williamsburg, VA, United States.

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2011). Generating smooth surface meshes from labelled medical datasets. In P. Nithiarasu, R. Löhner, R. van Loon, I. Sazonov, ... X. Xie (Eds.), CMBE11: 2nd International Conference on Computational & Mathematical Biomedical Engineering, 30 March - 1 April, 2011, Washington D.C. U.S.A (First edition, March 2011, pp. 213-216). Alexandria, VA, United States: All American Printing inc.
Peer reviewed

Boman, R., & Ponthot, J.-P. (March 2011). Continuous Roll Forming Simulation using Arbitrary Lagrangian Eulerian Formalism. Key Engineering Materials, 473, 564-571. doi:10.4028/www.scientific.net/KEM.473.564
Peer Reviewed verified by ORBi

Boman, R., Papeleux, L., & Ponthot, J.-P. (2011). Développement d’un outil de calcul de la charge de ruine des roues aubagées en titane. (2). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/93608

Boman, R., & Ponthot, J.-P. (February 2011). Application of the Arbitrary Lagrangian Eulerian Formalism to Stationary Roll Forming Simulations. Advanced Materials Research, 189-193, 1827-1833. doi:10.4028/www.scientific.net/AMR.189-193.1827
Peer reviewed

Ponthot, J.-P., & Boman, R. (2011). Advances in Metal Forming Simulation of using Arbitrary Lagrangian Eulerian Formalism. In A. Khan, C. Meredith, ... B. Farrokh (Eds.), Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling : Proceedings of PLASTICITY'11, Seventeenth International Symposium on Plasticity and its Current Applications (pp. 223-225). Maryland, United States: Neat Press.
Peer reviewed

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (26 November 2010). Multiple Material Mesh Generation For Biomedical Applications [Poster presentation]. National Committee on Biomedical Engineering - National Day, Brussels, Belgium.

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010). Multiple material mesh generation for biomedical applications. In Proceedings of the 9th belgian day on biomedical engineering.
Peer reviewed

Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (26 November 2010). Influence of thermoelectric coupling on ectopic beats generated by mechano-electric feedback (MEF) in a one-dimensional cardiac fiber model [Poster presentation]. 9th Belgian Day on Biomedical Engineering, Bruxelles, Belgium.

Collet, A., Desaive, T., Pierard, L., Boman, R., & Dauby, P. (2010). Influence of thermoelectric coupling on ectopic beats generated by mechano-electric feedback (MEF) in a one-dimensional cardiac fiber model. In 9th Belgian Day on Biomedical Engineering, Friday November 26th 2010 in the Academy Palace, Hertogstraat 1, 1000 Brussels.
Peer reviewed

Vigneron, L. M., Boman, R., Ponthot, J.-P., Robe, P., Warfield, S. K., & Verly, J. (01 August 2010). Enhanced FEM-based Modeling of Brain Shift Deformation in Image-Guided Neurosurgery. Journal of Computational and Applied Mathematics, 234, 2046-2053. doi:10.1016/j.cam.2009.08.062
Peer Reviewed verified by ORBi

Boman, R., & Ponthot, J.-P. (2010). Continuous Roll Forming Simulation Using Arbitrary Lagrangian Eulerian Formalism. In N. Khalili, S. Valliappan, Q. Li, ... A. Russell (Eds.), Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics (pp. 278). Sydney, Australia: Centre for Infrastructure Engineering and Safety.

Boman, R., & Ponthot, J.-P. (15 June 2010). New Advances in Numerical Simulation of Stationary Processes using Arbitrary Lagrangian Eulerian Formalism. Application to Roll Forming Process. AIP Conference Proceedings, 1252, 133-140. doi:10.1063/1.3457540
Peer Reviewed verified by ORBi

Boman, R. (2010). Développement d’un formalisme Arbitraire Lagrangien Eulérien tridimensionnel en dynamique implicite. Application aux opérations de mise à forme [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/83526

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2010). Smooth multiple-region mesh generation for biomedical applications. In ECCM 2010, 4th European Conference on Computational Mechanics (on CD-ROM).
Peer reviewed

Boman, R., & Ponthot, J.-P. (2010). Advances in Numerical Simulation of Stationary Processes using Arbitrary Lagrangian Eulerian Formalism. Application to Roll Forming Process. In ECCM 2010, 4th European Conference on Computational Mechanics (on CD-ROM).

Boman, R., Papeleux, L., & Ponthot, J.-P. (2010). Développement d’un outil de calcul de la charge de ruine des roues aubagées en titane. (1). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84180

Boman, R., & Ponthot, J.-P. (2009). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (8). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84171

Boman, R., Depauw, A., Hérisson, D., & Ponthot, J.-P. (2009). Stationary Roll Forming Simulation using Arbitrary Lagrangian Eulerian Formalism. In Proceedings of International Roll Forming Congress 2009 (pp. 33-40).
Peer reviewed

Depauw, A., Hérisson, D., Boman, R., & Kergen, R. (2009). Roll forming of Ultra High Strength Steels: progresses in experimental and modelling knowledge. In Proceedings of International Roll Forming Congress 2009 (pp. 101-108).
Peer reviewed

Boman, R., & Ponthot, J.-P. (2009). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (7). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84170

D'Otreppe, V., Boman, R., & Ponthot, J.-P. (2009). Génération de maillages pour la creation de modèles biomécaniques du cerveau. In M. Raous, P. Pasquet, ... C. Rey (Eds.), Neuvième Colloque National en Calcul des Structures (pp. 527-532). Massy, France: Copie Clean.

Boman, R., & Ponthot, J.-P. (2008). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (6). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84169

Boman, R. (November 2008). Modelling of forming using Metafor – a large strains FE software [Paper presentation]. University of Birmingham.

Boman, R., Papeleux, L., & Ponthot, J.-P. (2008). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Forming Process. In P. Hora (Ed.), Numisheet 2008: 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (pp. 405-410). ETH Zurich, Switzerland: Institute of Virtual Manufacturing.
Peer reviewed

Vigneron, L. M., Boman, R., Ponthot, J.-P., Robe, P., Warfield, S. K., & Verly, J. (2008). Issues in FEM-based Modeling of Brain Shift in Neurosurgery. In M. Hogge, R. Van Keer, L. Noels, L. Stainier, J.-P. Ponthot, J.-F. Remacle, ... E. Dick (Eds.), Proceedings of ACOMEN’2008, Advanced Computational Methods in Engineering (on CD-ROM). Belgium: University of Liège.
Peer reviewed

Boman, R., Papeleux, L., & Ponthot, J.-P. (2008). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (5). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84167

Ponthot, J.-P., Boman, R., Papeleux, L., Wouters, P., Daolio, G., Duroux, P., & Kergen, R. (2008). An Efficient Numerical Model for the Numerical Simulation of Forming Processes. In A. Khan & B. Farrokh (Eds.), Mechanics and Mechanisms of Finite Plastic Deformation : Proceedings of PLASTICITY'08, Fourteenth International Symposium on Plasticity and its Current Applications (pp. 70-72). Maryland, United States: Neat Press.
Peer reviewed

Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). An Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of Forming Processes. In International Workshop 2007: Advancements in Design Optimization of Materials, Structures and Mechanical Systems (pp. 142-151).

Vigneron, L., Boman, R., Robe, P., Warfield, S. K., & Verly, J. (2007). 3D FEM/XFEM-based Biomechanical Brain Modeling for Preoperative Image Update. In K. Miller, K. D. Paulsen, A. A. Young, ... P. M. F. Nielsen (Eds.), MICCAI 2007 Workshop Proceedings : Computational Biomechanics for Medicine II (pp. 33-42).
Peer reviewed

Fancello, E., Vigneron, L., Noels, L., Ponthot, J.-P., Boman, R., & Stainier, L. (2007). Identificación de parámetros de viscoelasticidad finita aplicada a la simulación del comportamiento mecánico de masa encefálica. In Congreso Iberoamericano de Ingenieria Mecanica.
Peer reviewed

Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Forming Process. In D. R. J. Owen & E. Oñate (Eds.), COMPLAS 2007 : IX International Conference on Computational Plasticity Fundamentals and Applications (on CD-ROM).

Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (4). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84166

Boman, R., Papeleux, L., & Ponthot, J.-P. (17 May 2007). A General Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of 3D forming Processes. AIP Conference Proceedings, 908, 179-184. doi:10.1063/1.2740808
Peer Reviewed verified by ORBi

Boman, R., Papeleux, L., & Ponthot, J.-P. (2007). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (3). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84164

Verly, J., Vigneron, L. M., Boman, R., Phillips, C. L., & Chellaoui, K. (2007). Le rôle de l’ingénieur en imagerie médicale [Paper presentation]. Meeting of the 160th anniversary of the AILg (Association des Ingénieurs sortis de l’Université de Li`ege): L’ingénieur et les sciences du vivant, Liège, Belgium.

Vigneron, L., Boman, R., Ponthot, J.-P., Robe, P. A., Warfield, S. K., & Verly, J. (2007). Navigation neurochirurgicale basée sur des modèles biomécaniques [Paper presentation]. Meeting of the 160th anniversary of the AILg (Association des Ingénieurs sortis de 14 l’Université de Liège): L’ingénieur et les sciences du vivant, Liège, Belgium.

Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Cold Roll Forming and Metal Cutting Simulation using a 3D Arbitrary Lagrangian Eulerian Formulation. In G. de Saxcé & N. Moës (Eds.), Modeling in Mechanical and Civil Engineering : Collection of Papers from Prof. Nguyen Dang Hung's former students. HCM City, Vietnam: Vietnam National University Ho Chi Minh City Publishing House.

Verly, J., Kavec, M., Vigneron, L., Phillips, C., Boman, R., Libertiaux, V., Ponthot, J.-P., Cescotto, S., Robe, P., Martin, D., Wikler, D., Levivier, M., & Brotchi, J. (November 2006). Problems and Challenges of Image-Guided Neurosurgical Navigation and Intervention. Lecture Notes in Computer Science, 4263, 35. doi:10.1007/11902140_4
Peer reviewed

Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (2). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84163

Boman, R., Papeleux, L., Bui, Q. V., & Ponthot, J.-P. (03 July 2006). Application of the Arbitrary Lagrangian Eulerian Formulation to the Numerical Simulation of Cold Roll Forming Process. Journal of Materials Processing Technology, 177 (1-3), 621-625. doi:10.1016/j.jmatprotec.2006.04.120
Peer Reviewed verified by ORBi

Vigneron, L., Boman, R., Robe, P., Warfield, S. K., & Verly, J. (2006). Preoperative Brain Image Update with FEM- and XFEM-based Biomechanical Model. In 7th World Congress on Computational Mechanics (on CD-ROM).

Boman, R., Papeleux, L., Viet, B. Q., & Ponthot, J.-P. (2006). A 3D Arbitrary Lagrangian Eulerian Formulation for the Numerical Simulation of Forming Processes. Application to cold roll forming and metal cutting. In C. A. Mota Soares (Ed.), Proceedings of ECCM 2006, III European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering (on CD-ROM).
Peer reviewed

Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D. Santos & A. Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).
Peer reviewed

Boman, R., Papeleux, L., & Ponthot, J.-P. (2006). Etudes sur la simulation de la tenue thermo-mécanique d'assemblages complexes. (1). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84162

Verly, J., Kavec, M., Vigneron, L. M., Phillips, C. L., Boman, R., Libertiaux, V., Ponthot, J.-P., Cescotto, S., Robe, P. A., Martin, D., Wikler, D., Levivier, M., & Brotchi, J. (2006). Problem and challenges of image-guided neurosurgical navigation and intervention [Paper presentation]. 21st International Symposium on Computer and Information Sciences (ISCIS), Istanbul, Turkey.

Vigneron, L. M., Boman, R., Robe, P. A., Warfield, S. K., & Verly, J. (2006). Preoperative Brain Image Update with FEM- and XFEM-based Biomedical Model [Paper presentation]. 7th World Congress on Computational Mechanics (WCCM6), Los Angeles, CA, United States.

Boman, R., & Ponthot, J.-P. (2005). Prédiction numérique de l’angle de surformage en profilage à froid. (4). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84161

Boman, R., Papeleux, L., Viet, B. Q., Ponthot, J.-P., Wouters, P., & Kergen, R. (05 August 2005). An ALE Model for Numerical Simulation of Cold Roll Forming Process. AIP Conference Proceedings, 778, 768-773. doi:10.1063/1.2011315
Peer Reviewed verified by ORBi

Boman, R. (May 2005). ALE simulations using Metafor [Paper presentation]. Laboratoire de Physique et Mécanique des Matériaux (LPMM).

Viet, B. Q., Papeleux, L., Boman, R., Ponthot, J.-P., Wouters, P., Kergen, R., & Daolio, G. (2005). Numerical Simulation of Cold Roll Forming Process. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 141-144). The Romanian Academy Publishing House Bucharest.
Peer reviewed

Chabrand, P., Dubois, F., Graillet, D., Boman, R., & Ponthot, J.-P. (March 2005). Numerical simulation of tribological devices used as a set of benchmarks for comparing contact algorithms. Finite Elements in Analysis and Design, 41 (6), 637-665. doi:10.1016/j.finel.2004.08.001
Peer Reviewed verified by ORBi

Boman, R. (February 2005). Architecture de Metafor - code EF orienté objet [Paper presentation]. CODICIEL Scientific Meeting, Paris, France.

Boman, R., & Ponthot, J.-P. (01 October 2004). Finite Element Simulation of Lubricated Contact in Rolling using the Arbitrary Lagrangian-Eulerian Formulation. Computer Methods in Applied Mechanics and Engineering, 193 (39-41), 4323-4353. doi:10.1016/j.cma.2004.01.034
Peer Reviewed verified by ORBi

Boman, R., Papeleux, L., & Ponthot, J.-P. (2004). Prédiction numérique de l’angle de surformage en profilage à froid. (3). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84159

Boman, R. (November 2003). Compléments de C++ [Paper presentation]. ULg - Université de Liège.

Boman, R., Papeleux, L., & Ponthot, J.-P. (2003). Prédiction numérique de l’angle de surformage en profilage à froid. (2). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84157

Verly, J., Vigneron, L., Petitjean, N., Martin, C., Guran, R., Boman, R., & Robe, P. (February 2003). Human-Visual-System-Based Fusion of Multimodality 3D Neuroimagery using Brain-Shift-Compensating Finite-Element-Based Deformable Models. Proceedings of SPIE: The International Society for Optical Engineering, 5029, 338-349. doi:10.1117/12.487088
Peer reviewed

Boman, R. (January 2003). Simulation of metal forming processes : Numerical aspects of contact and friction [Paper presentation]. LaCaN, Barcelona, Spain.

Boman, R., & Ponthot, J.-P. (09 September 2002). Numerical Simulation of Lubricated Contact in Rolling Processes. Journal of Materials Processing Technology, 125-126, 405-411. doi:10.1016/S0924-0136(02)00291-1
Peer Reviewed verified by ORBi

Boman, R., Papeleux, L., & Ponthot, J.-P. (2002). Prédiction numérique de l’angle de surformage en profilage à froid. (1). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84155

Boman, R., & Ponthot, J.-P. (2001). Numerical Simulation of Lubricated Contact between Solids in Metal Forming Processes using the Arbitrary Lagrangian Eulerian Formulation. In Simulation of Material Processing: Theory, Methods and Application: Proceedings of the 7th International Conference NUMIFORM 2001 (pp. 45-53). Taylor & Francis.
Peer reviewed

Boman, R., & Ponthot, J.-P. (2000). Arbitrary Lagrangian Eulerian Method for the Simulation of Lubricated Contact between Solids in Metal Forming Processes. In M. Pietryk, J. Kusiak, J. Majta, P. Hartley, ... I. Pillinger (Eds.), Metal Forming 2000 (pp. 57-62). Rotterdam, Netherlands: Balkema.
Peer reviewed

Boman, R., & Ponthot, J.-P. (2000). ALE Methods for Determining Stationary Solutions Metal Forming Processes. In E. Oñate, G. Bugeda, ... B. Suárez (Eds.), Proceedings of ECCOMAS 2000/COMPLAS VI, European Congress on Computational Methods in Applied Sciences and Engineering.
Peer reviewed

Boman, R. (2000). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme. (3ème année FRIA). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84177

Boman, R., & Ponthot, J.-P. (2000). ALE Update Procedures for Stationary Solutions of Metal Forming Processes. In Proceedings of the 5th National Belgian Congress on Theoretical and Applied Mechanics (pp. 195-197).

Boman, R., & Ponthot, J.-P. (February 2000). Finite Elements for the Lubricated Contact Between Solids in Metal Forming Processes. Acta Metallurgica Sinica, 13 (1), 319-327.
Peer Reviewed verified by ORBi

Boman, R. (2000). Eléments Finis de Lubrification pour la Prise en Compte du Frottement dans la Simulation de Processus de Formage des Matériaux. In P. Chabrand, M. Jean, ... M. Raous (Eds.), Colloque National Mécamat 2000.

Garcìa Garino, C., Ponthot, J.-P., Boman, R., & Oliver, J. (1999). A Quasi-Coulomb Model for Frictional Contact Interfaces. In MECOM'99 - Proceedings of the 6th Argentine Congress on Computational Mechanics.
Peer reviewed

Boman, R. (1999). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme. (2ème année FRIA). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84176

Garcìa Garino, C., Ponthot, J.-P., Boman, R., & Oliver, J. (1999). A Symmetric Tangent Operator Recovery via Quasi-Coulomb Model for Frictional Contact Between Solids in Large Deformation Analysis. In ECCM’99, European Conference on Computational Mechanics.
Peer reviewed

Boman, R., & Ponthot, J.-P. (1999). Numerical Methods for the Lubricated Contact Between Solids in Metal Forming Processes. In ECCM’99, European Conference on Computational Mechanics.
Peer reviewed

Boman, R., & Ponthot, J.-P. (1999). ALE Methods for Stationary Solutions of Metal Forming Processes. In J. A. Covas (Ed.), Proceedings of the Second ESAFORM Conference on Material Forming (pp. 585-588).
Peer reviewed

Boman, R., Colantonio, L., & Ponthot, J.-P. (1998). Effective Iterative Solvers for Highly Non-Linear & Large Deformation Pressure Dependent Problems. In R. Van Keer, B. Verhegghe, M. Hogge, ... E. Noldus (Eds.), Proceedings of ACOMEN'98, Advanced Computational Methods in Engineering, part 2: Contributed papers (pp. 133-140). Maastricht, Netherlands: Shaker Publishing.

Boman, R. (1998). Formulation Arbitraire Lagrangienne-Eulérienne pour le contact lubrifié entre solides. Applications aux opérations de mise à forme. (1ère année FRIA). ULg - Université de Liège. https://orbi.uliege.be/handle/2268/84175

Boman, R., Colantonio, L., & Ponthot, J.-P. (1998). Iterative Solvers for Large Pressure Dependent Problems. In J. Huétink & F. P. T. Baaijens (Eds.), Proceedings of the Sixth International Conference on Numerical Methods in Industrial Forming Processes (pp. 225-231).
Peer reviewed

Boman, R. (1997). Méthodes itératives pour la résolution de grands systèmes non linéaires [Master’s dissertation, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/13575

Contact ORBi