Grüter, H.,; Matter, M.,; Oehlmann, K.,; Hicks, M., Drying of sewage sludge—An important step in waste disposal. Water Science and Technology 1990, 22(12), 57–63.
Vaxelaire, J.,; Bongiovanni, J.,; Mousques, P.,; Puiggali, J., Thermal drying of residual sludge. Water Research 2000, 34(17), 4318–4323.
Arlabosse, P.,; Chavez, S.,; Lecomte, D., Method for thermal design of paddle dryers:Application to municipal sewage sludge. Drying Technology 2004, 22(10), 2375–2393.
Reyes, A.,; Eckholt, M.,; Troncoso, F.,; Efremov, G., Drying kinetics of sludge from a wastewater treatment plant. Drying Technology 2004, 22(9), 2135–2150.
Léonard, A.,; Blacher, S.,; Marchot, P.,; Pirard, J-P.,; Crine, M., Convective drying of wastewater sludges:Influence of air temperature, superficial velocity, and humidity on the kinetics. Drying Technology 2005, 23(8), 1667–1679.
Tao, T.,; Peng, X.,; Lee, D., Thermal drying of wastewater sludge:Change in drying area owing to volume shrinkage and crack development. Drying Technology 2005, 23(3), 669–682.
Werle, S.,; Wilk, R.K., A review of methods for the thermal utilization of sewage sludge:The polish perspective. Renewable Energy 2010, 35(9), 1914–1919.
Bennamoun, L.,; Crine, M.,; Léonard, A., Convective drying of wastewater sludge:Introduction of shrinkage effect in mathematical modeling. Drying Technology 2013, 31(6), 643–654.
Li, J.,; Bennamoun, L.,; Fraikin, L.,; Salmon, T.,; Toye, D.,; Schreinemachers, R.,; Léonard, A., Analysis of the shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Drying Technology 2014, 32(14), 1706–1717.
Léonard, A.,; Meneses, E.,; Le Trong, E.,; Salmon, T.,; Marchot, P.,; Toye, D.,; Crine, M., Influence of back mixing on the convective drying of residual sludges in a fixed bed. Water Research 2008, 42(10), 2671–2677.
Li, J.,; Fraikin, L.,; Salmon, T.,; Bennamoun, L.,; Toye, D.,; Schreinemachers, R.,; Léonard, A., Investigation on convective drying of mixtures of sewage sludge and sawdust in a fixed bed. Drying Technology 2015, 33(6), 704–712.
Berghel, J.,; Renström, R., Basic design criteria and corresponding results performance of a pilot-scale fluidized superheated atmospheric condition steam dryer. Biomass and Bioenergy 2002, 23(2), 103–112.
Srinivasakannan, C.,; Balasubramaniam, N., Drying of rubber wood sawdust using tray dryer. Particulate Science and Technology 2006, 24(4), 427–439.
Arlabosse, P.,; Ferrasse, J.H.,; Lecomte, D.,; Crine, M.,; Dumont, Y.,; Léonard, A., Efficient sludge thermal processing:From drying to thermal valorization. In Modern Drying Technology:Energy Savings; Tsotsas, E., Mujumdar, A.S., Eds.; Vol. 4; Wiley-VCH:Weinheim 2012.
Li, J.,; Plougonven, E.,; Fraikin, L.,; Salmon, T.,; Toye, D.,; Léonard, A., Image analysis of X-ray tomograms of sludge during convective drying in a pilot-scale fixed bed. Chemical Engineering Science 2015, 134, 222–229.
Tao, T.,; Peng, X.,; Lee, D., Structure of crack in thermally dried sludge cake. Drying Technology 2005, 23(7), 1555–1568.
Tao, T.,; Peng, X.,; Lee, D., Skin layer on thermally dried sludge cake. Drying Technology 2006, 24(8), 1047–1052.
Li, J.,; Plougonven, E.,; Fraikin, L.,; Salmon, T.,; Toye, D.,; Nistajakis, E.,; Léonard, A., Multiscale structure characterization of sawdust–wastewater sludge extrudates dried in a pilot-scale fixed bed. Biomass and Bioenergy 2015, 81, 98–107.
American Society of Agricultural Engineers. ASAE standard no. D245.5:Moisture relationships of plant-based agricultural products. ASAE:St. Joseph, MI, 1996; 452–464.
Fraikin, L.,; Herbreteau, B.,; Chaucherie, X.,; Nicol, F.,; Crine, M.,; Léonard, A., Impact of storage at 4°C on the study of sludge drying emissions. In 2nd European Conference on Sludge Management, September 9–10, Budapest, Hungary, 2010.
Léonard, A.,; Blandin, G.,; Crine, M., Importance of rheological properties when drying sludge in a fixed bed. Presented at the 4th Inter-American Drying Conference:Challenges for Efficient Drying Processes, Montreal, Canada, August 23–27, 2009.
Huron, Y.,; Salmon, T.,; Crine, M.,; Blandin, G.,; Léonard, A., Effect of liming on the convective drying of urban residual sludges. Asia‐Pacific Journal of Chemical Engineering 2010, 5(6), 909–914.
Toye, D.,; Crine, M.,; Marchot, P., Imaging of liquid distribution in reactive distillation packings with a new high-energy X-ray tomograph. Measurement Science and Technology 2005, 16(11), 2213–2220.
Aferka, S.,; Crine, M.,; Saroha, A.K.,; Toye, D.,; Marchot, P., In situ measurements of the static liquid holdup in katapak-sp12tm packed column using X-ray tomography. Chemical Engineering Science 2007, 62(21), 6076–6080.
Aferka, S.,; Marchot, P.,; Crine, M.,; Toye, D., Interfacial area measurement in a catalytic distillation packing using high energy X-ray CT. Chemical Engineering Science 2010, 65(1), 511–516.
Aferka, S.,; Viva, A.,; Brunazzi, E.,; Marchot, P.,; Crine, M.,; Toye, D., Tomographic measurement of liquid hold up and effective interfacial area distributions in a column packed with high performance structured packings. Chemical Engineering Science 2011, 66(14), 3413–3422.
Janzen, A.,; Steube, J.,; Aferka, S.,; Kenig, E.,; Crine, M.,; Marchot, P.,; Toye, D., Investigation of liquid flow morphology inside a structured packing using X-ray tomography. Chemical Engineering Science 2013, 102, 451–460.
Otsu, N., A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man, and Cybernetics 1979, 9(1), 62–66.
