[en] We successfully prepared NASICON-type Na3V2(PO4)2F3 (NVPF) and a Na3V2(PO4)2F3/carbon nanotubes (CNT) composite by spray-drying followed by heat treatment in argon for 2 hours at 600 °C. The addition of CNT in the spray-drying solution creates a CNT network within the NVPF particles. After grinding, the smaller NVPF particles remain linked by CNT. Thanks to this conducting network, the composite powder displays competitive electrochemical performance when cycled against lithium in hybrid-ion batteries (2–4.6 V vs. Li+/Li) with specific capacities of 125 mAh.g−1 at C/10, 103 mAh.g−1 at 1C and 91 mAh.g−1 at 4C, together with 97.5% capacity retention at 1C over 100 cycles with coulombic efficiency of 99.4%. These results demonstrate that sodium vanadium (III) fluorophosphate electrode material can be obtained in a time-efficient way using the easily up-scalable spray-drying method.
Research Center/Unit :
GreenMat CESAM - Complex and Entangled Systems from Atoms to Materials - ULiège
Disciplines :
Chemistry
Author, co-author :
Eshraghi, Nicolas ; Université de Liège > Département de chimie (sciences) > LCIS - GreenMAT
F.R.S.-FNRS - Fonds de la Recherche Scientifique [BE] BATWAL project [PE Plan Marshall 2.vert] Beware Fellowship Academia [2015-1, RESIBAT no. 1510399] FRIA - Fonds pour la Formation à la Recherche dans l'Industrie et dans l'Agriculture [BE]
[1] Palomares, V., Serras, P., Villaluenga, I., Hueso, K.B., Carretero-González, J., Rojo, T., Na-ion batteries, recent advances and present challenges to become low cost energy storage systems. Energy Environ. Sci. 5 (2012), 5884–5901, 10.1039/c2ee02781j.
[2] Song, W., Ji, X., Chen, J., Wu, Z., Zhu, Y., Ye, K., Hou, H., Jinga, M., Banks, C.E., Mechanistic investigation of ion migration in Na3V2(PO4)2F3 hybrid-ion batteries. Phys. Chem. Chem. Phys. 17 (2015), 159–165, 10.1039/C4CP04649H.
[3] Slater, M.D., Kim, D., Lee, E., Johnson, C.S., Sodium-ion batteries. Adv. Funct. Mater. 23 (2013), 947–958, 10.1002/adfm.201200691.
[4] Islam, M.S., Fisher, C.A.J., Islam, S.M., Fisher, C.A.J., Lithium and sodium battery cathode materials: computational insights into voltage, diffusion and nanostructural properties. Chem. Soc. Rev. 43 (2014), 185–204, 10.1039/c3cs60199d.
[5] Liu, Z., Hu, Y., Dunstan, M.T., Huo, H., Hao, X., Zou, H., Zhong, G., Yang, Y., Grey, C.P., Local structure and dynamics in the Na-ion battery positive electrode material Na3V2(PO4)2F3. Chem. Mater. 2 (2014), 2513–2521, 10.1021/cm403728w.
[6] Gover, R.K.B., Bryan, A., Burns, P., Barker, J., The electrochemical insertion properties of sodium vanadium fluorophosphate, Na3V2(PO4)2F3. Solid State Ionics. 177 (2006), 1495–1500, 10.1016/j.ssi.2006.07.028.
[7] Song, W., Liu, S., A sodium vanadium three-fluorophosphate cathode for rechargeable batteries synthesized by carbothermal reduction. Solid State Sci. 15 (2013), 1–6, 10.1016/j.solidstatesciences.2012.09.012.
[8] Kumar, P.R., Jung, Y.H., Lim, C.H., Kim, D.K., Na3V2O2x(PO4)2F3-2x: a stable and high-voltage cathode material for aqueous sodium-ion batteries with high energy density. J. Mater. Chem. A Mater. Energy Sustain. 3 (2015), 6271–6275, 10.1039/C5TA00980D.
[9] Clark, J.M., Barpanda, P., Yamada, A., Islam, M.S., Sodium-ion battery cathodes Na 2 FeP 2 O 7 and Na 2 MnP 2 O 7: diffusion behaviour for high rate performance. J. Mater. Chem. A 2 (2014), 11807–11812, 10.1039/C4TA02383H.
[10] Serras, P., Palomares, V., Goñi, A., Kubiak, P., Rojo, T., Electrochemical performance of mixed valence Na3V2O2x(PO4)2F3-2x/C as cathode for sodium-ion batteries. J. Power Sources 241 (2013), 56–60, 10.1016/j.jpowsour.2013.04.094.
[11] Song, W., Cao, X., Wu, Z., Chen, J., Huangfu, K., Wang, X., Huang, Y., Ji, X., A study into the extracted ion number for NASICON structured Na3V2(PO4)3 in sodium-ion batteries. Phys. Chem. Chem. Phys. 16 (2014), 17681–17687, 10.1039/c4cp01821d.
[12] Song, W., Ji, X., Wu, Z., Yang, Y., Zhou, Z., Li, F., Chen, Q., Banks, C.E., Exploration of ion migration mechanism and diffusion capability for Na 3V2(PO4)2F3 cathode utilized in rechargeable sodium-ion batteries. J. Power Sources 256 (2014), 258–263, 10.1016/j.jpowsour.2014.01.025.
[13] Song, W., Cao, X., Wu, Z., Chen, J., Zhu, Y., Hou, H., Lan, Q., Ji, X., Investigation of the sodium ion pathway and cathode behavior in Na3V2(PO4)2F3 combined via a first principles calculation. Langmuir. 30 (2014), 12438–12446, 10.1021/la5025444.
[14] Shakoor, R. a., Seo, D.-H., Kim, H., Park, Y.-U., Kim, J., Kim, S.-W., Gwon, H., Lee, S., Kang, K., A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries. J. Mater. Chem. 22 (2012), 20535–20541, 10.1039/c2jm33862a.
[15] Chihara, K., Kitajou, A., Gocheva, I.D., Okada, S., Yamaki, J.I., Cathode properties of Na3M2(PO4) 2F3 [M=Ti, Fe, V] for sodium-ion batteries. J. Power Sources 227 (2013), 80–85, 10.1016/j.jpowsour.2012.10.034.
[16] Lin, Z., Wang, J., Low-cost Nanomaterials Toward Greener and More Efficient Energy Applications. 2014, 10.1007/978-1-4471-6473-9.
[17] Bianchini, M., Brisset, N., Fauth, F., Weill, F., Elkaim, E., Suard, E., Masquelier, C., Croguennec, L., Na 3 V 2 (PO 4) 2 F 3 Revisited: A High-Resolution Diffraction Study. Chem. Mater. 26 (2014), 4238–4247, 10.1021/cm501644g.
[18] Le Meins, J.-M., Crosnier-Lopez, M.-P., Hemon-Ribaud, A., Courbion, G., Phase Transitions in the Na3M2(PO4)2F3 Family (M=Al3+, V3+, Cr3+, Fe3+, Ga3+): Synthesis, Thermal, Structural, and Magnetic Studies. J.Solid State Chem. 148 (1999), 260–277, 10.1006/jssc.1999.8447.
[19] Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., Croguennec, L., Comprehensive Investigation of the Na3V2(PO4)2F3-NaV2(PO4)2F3 System by Operando High Resolution Synchrotron X-ray Diffraction. Chem. Mater. 27 (2015), 3009–3020, 10.1021/acs.chemmater.5b00361.
[20] Jiang, T., Chen, G., Li, A., Wang, C., Wei, Y., Sol-gel preparation and electrochemical properties of Na3V2(PO4)2F3/C composite cathode material for lithium ion batteries. J. Alloys Compd. 478 (2009), 604–607, 10.1016/j.jallcom.2008.11.147.
[21] Song, W., Ji, X., Wu, Z., Zhu, Y., Li, F., Yao, Y., Banks, C.E., Multifunctional dual Na3V2(PO4)2F3 cathode for both lithium-ion and sodium-ion batteries. RSC Adv., 4, 2014, 11375, 10.1039/c3ra47878e.
[22] Feng, Q., Peng, K., Huang, Z., Yan, W., Tang, S., Liu, Q., An investigation of Li0.6Na2.4V2(PO4)2F3 cathode with NASICON structure in lithium-ion battery. J. Power Sources 280 (2015), 703–709, 10.1016/j.jpowsour.2015.01.062.
[24] Park, Y.-U., Seo, D.-H., Kim, B., Hong, K.-P., Kim, H., Lee, S., Shakoor, R.a., Miyasaka, K., Tarascon, J.-M., Kang, K., Tailoring a fluorophosphate as a novel 4 V cathode for lithium-ion batteries. Sci. Rep., 2, 2012, 704, 10.1038/srep00704.
[25] Yu, F., Zhang, J.J., Yang, Y.F., Song, G.Z., Preparation and electrochemical performance of Li3V2(PO4)(3)/C cathode material by spray-drying and carbothermal method. J. Solid State Electrochem. 14 (2010), 883–888, 10.1007/s10008-009-0882-6.
[26] Ju, S.H., Kang, Y.C., LiFePO4/C cathode powders prepared by spray pyrolysis from the colloidal spray solution containing nano-sized carbon black. Mater. Chem. Phys. 107 (2008), 328–333, 10.1016/j.matchemphys.2007.07.025.
[27] Brisbois, M., Krins, N., Hermann, R.P., Schrijnemakers, A., Cloots, R., Vertruyen, B., Boschini, F., Spray-drying synthesis of Na2FePO4F/carbon powders for lithium-ion batteries. Mater. Lett. 130 (2014), 263–266, 10.1016/j.matlet.2014.05.121.
[28] Sen, D., Bahadur, J., Mazumder, S., Verma, G., Hassan, P. a., Bhattacharya, S., Vijai, K., Doshi, P., Nanocomposite silica surfactant microcapsules by evaporation induced self assembly: tuning the morphological buckling by modifying viscosity and surface charge. Soft Matter., 8, 2012, 1955, 10.1039/c1sm06964k.
[29] Tsapis, N., Dufresne, E.R., Sinha, S.S., Riera, C.S., Hutchinson, J.W., Mahadevan, L., Weitz, D.A., Onset of buckling in drying droplets of colloidal suspensions. Phys. Rev. Lett. 94 (2005), 1–4, 10.1103/PhysRevLett.94.018302.
[30] Quemeneur, F., Quilliet, C., Faivre, M., Viallat, A., Pépin-Donat, B., Gel phase vesicles buckle into specific shapes. Phys. Rev. Lett. 108 (2012), 1–5, 10.1103/PhysRevLett.108.108303.