de Coulon Y, Smith T, Hermann J, Chevroulet M & Rudolf F: Design and test of a precision servo-accelerometer with digital output, 7th Int. Conf. Solid-State Sensors and Actuators (Transducer '93), Yokohama, pp.832-835, 1993.
Howe RT, Boser BE & Pisano AP: Polysilicon integrated microsystems: technologies and applications, Sensors & Actuators, Vol.A56, No.1-2, pp.167-177, 1996.
ADXL05 - monolithic accelerometer with signal conditioning, Analog Devices, Norwood, MA, datasheet, 1995.
Spineanu A, Benabes P & Kielbasa R: A piezoelectric accelerometer with sigma-delta servo technique, Sensors & Actuators, A60, pp.127-133, 1997.
Rockstad HK, Tang TK, Reynolds JK, Kenny TW, Kaiser WJ & Gabrielson TB: A miniature, high-sensitivity, electron tunnelling accelerometer, Sensors & Actuators, A53, pp.227-231, 1996.
Storgaard-Larsen T, Bouwstra S. & Leistiko O: Opto-mechanical accelerometer based on strain sensing by Bragg grating in a planar waveguide, Sensors & Actuators, A52, pp.25-32, 1996.
http://www.sensonor.com/
Yazdi N & Najafi K: An all-silicon single wafer fabrication technology for precision microaccelerometers, 9th International Conference on Solid-State Sensors and Actuators (Transducer '97), Chicago, Vol.2, pp.1181-1184, 1997.
Lemkin MA: Micro accelerometer design with digital feedback control, University of California, Berkeley, PhD dissertation, 1997.
Lemkin MA & Boser BA: Three-axis micromachined accelerometer with a CMOS position-sense interface and digital offset-trim electronics, IEEE J. of Solid-State Circuits, Vol.34, No.4, pp.456-468, 1999.
Weinberg M, Bernstein J, Cho S, King AT, Kourepenis A, Ward P & Sohn J: A micromachined comb-drive tuning fork gyroscope for commercial applications, Proc. Sensors Expo, pp.187-193, Cleveland, 1994.
Xuesong J, Seeger JI, Kraft M & Boser BE: A monolithic surface micromachined Z-axis gyroscope with digital output (to be published at the Symposium on VLSI Circuits, Hawaii, June 2000).
Geiger W, Folkmer B, Merz J, Sandmaier H & Lang W: A new silicon rate gyroscope, Sensors & Actuators, A73, pp.45-51, 1999.
Putty MW: A micromachined vibrating ring gyroscope, PhD dissertation, Univ of Michigan, Ann Arbor, 1995.
Hopkin I: Performance and design of a silicon micromachined gyro, Proc. Symp. Gyro Technology, pp. 1.0-1.11, Stuttgart, 1997.
Junneau T, Pisano AP & Smith JH: Dual axis operation of a micromachined rate gyroscope 9th Int. Conf. Solid-State Sensors and Actuators (Transducer '97), Chicago, Vol.2, pp.883-886, 1997.
Fukatsu K, Murakoshi T & Esashi M: Electrostatically levitated micro motor for inertia measurement system, Transducer '99, 3P2.16, 1999.
Kraft M & Evans A: System level simulation of an electrostatically levitated disk, Proc. 3rd Conf. on Modelling and Simulation of Microsystems, pp. 130-133, San Diego, March 2000.