[4] He, H., Stroeven, P., Pirard, E., Courard, L., On the shape simulation of aggregate and cement particles in a DEM system. Adv Mater Sci Eng, 2015, 7, 10.1155/2015/692768 Article ID 692768.
[5] Dintcheva, N.T., La Mantia, F., Trotta, F., Luda, M., Camino, G., Paci, M., et al. Effects of filler type and processing apparatus on the properties of the recycled “light fraction” from municipal post-consumer plastics. Polym Adv Technol 12 (2001), 552–560.
[6] Hannawi, K., Kamali-Bernard, S., Prince, W., Physical and mechanical properties of mortars containing PET and PC waste aggregates. Waste Manage 30 (2010), 2312–2320.
[7] Reis, J., Chianelli-Junior, R., Cardoso, J., Marinho, F., Effect of recycled PET in the fracture mechanics of polymer mortar. Constr Build Mater 25 (2011), 2799–2804.
[8] Corinaldesi, V., Donnini, J., Nardinocchi, A., Lightweight plasters containing plastic waste for sustainable and energy-efficient building. Constr Build Mater 94 (2015), 337–345.
[9] Corinaldesi, V., Mazzoli, A., Moriconi, G., Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles. Mater Des 32 (2011), 1646–1650.
[10] Akçaözoğlu, S., Akçaözoğlu, K., Atiş, C.D., Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA). Compos Part B Eng 45 (2013), 721–726.
[11] Yesilata, B., Isıker, Y., Turgut, P., Thermal insulation enhancement in concretes by adding waste PET and rubber pieces. Constr Build Mater 23 (2009), 1878–1882.
[12] Iucolano, F., Liguori, B., Caputo, D., Colangelo, F., Cioffi, R., Recycled plastic aggregate in mortars composition: effect on physical and mechanical properties. Mater Des 52 (2013), 916–922.
[13] da Silva, A.M., de Brito, J., Veiga, R., Incorporation of fine plastic aggregates in rendering mortars. Constr Build Mater 71 (2014), 226–236.
[14] Albano, C., Camacho, N., Hernández, M., Matheus, A., Gutiérrez, A., Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios. Waste Manage 29 (2009), 2707–2716.
[15] Ferreira, L., de Brito, J., Saikia, N., Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate. Constr Build Mater 36 (2012), 196–204.
[16] Saikia, N., de Brito, J., Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Constr Build Mater 52 (2014), 236–244.
[17] Ismail, Z.Z., Al-Hashmi, E.A., Use of waste plastic in concrete mixture as aggregate replacement. Waste Manage 28 (2008), 2041–2047.
[18] Correia, J.R., Lima, J.S., de Brito, J., Post-fire mechanical performance of concrete made with selected plastic waste aggregates. Cem Concr Compos 53 (2014), 187–199.
[19] Sokołowska, J.J., Piotrowski, T., Garbacz, A., Kowalik, P., Effect of introducing recycled polymer aggregate on the properties of C-PC composites. Adv Mat Res, 2013, 520–526.
[20] Lo Monte, F., Bamonte, P., Gambarova, P.G., Physical and mechanical properties of heat-damaged structural concrete containing expanded polystyrene syntherized particles. Fire Mater 39 (2015), 58–71.
[21] Silva, R.V., de Brito, J., Saikia, N., Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates. Cem Concr Compos 35 (2013), 23–31.
[22] Kan, A., Demirboga, R., A novel material for lightweight concrete production. Cem Concr Compos 31 (2009), 489–495.
[23] Marzouk, O.Y., Dheilly, R.M., Queneudec, M., Valorization of post-consumer waste plastic in cementitious concrete composites. Waste Manage 27 (2007), 310–318.
[24] Gadea, J., Rodriguez, A., Campos, P.L., Garabito, J., Calderon, V., Lightweight mortar made with recycled polyurethane foam. Cem Concr Compos 32 (2010), 672–677.
[25] Choi, Y.-W., Moon, D.-J., Chung, J.-S., Cho, S.-K., Effects of waste PET bottles aggregate on the properties of concrete. Cem Concr Res 35 (2005), 776–781.
[26] Choi, Y.W., Moon, D.J., Kim, Y.J., Lachemi, M., Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles. Constr Build Mater 23 (2009), 2829–2835.
[27] Mounanga, P., Gbongbon, W., Poullain, P., Turcry, P., Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes. Cem Concr Compos 30 (2008), 806–814.
[28] Madandoust, R., Ranjbar, M.M., Mousavi, S.Y., An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene. Constr Build Mater 25 (2011), 3721–3731.
[29] Lo, T.Y., Cui, H.Z., Effect of porous lightweight aggregate on strength of concrete. Mater Lett 58:6 (2004), 916–919.
[30] Bentz, D.P., Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars. Cem Concr Compos 31 (2009), 285–289.
[31] Ramesan, A., Babu, S.S., Lal, A., Performance of light-weight concrete with plastic aggregate. Int J Eng Res Appl 5 (2015), 105–110.
[32] Wang, R., Meyer, C., Performance of cement mortar made with recycled high impact polystyrene. Cem Concr Compos 34 (2012), 975–981.
[33] EN 196-1, Methods of testing cement: determination of strength. September 1996.
[34] Lee, S.-T., Park, C.B., Foam extrusion: principles and practice. 2014, CRC press.
[35] EN 933-1, Tests for geometrical properties of aggregates: determination of particle size distribution, sieving method. April 1999.
[36] EN 1097-6, Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption. August 2013.
[37] EN 1097-3, Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids. October 1999.
[38] EN 1015-3, Methods of test for mortar for masonry: determination of consistence of fresh mortar (by flow table). June 2000.
[39] EN 12397-7, Testing hardened concrete: density of hardened concrete. June 2002.
[40] EN 206-1, Concrete: specification, performance, production and conformity. March 2006.
[41] ACI Committee 213, Guide for structural lightweight aggregate concrete (ACI 213R-87 reapproved 1999). 1987, American Concrete Institute, Farmington Hills.
