Vesilind, P.A.; Spinosa, L. Production and regulations. In Sludge into Biosolids, Processing, Disposal and Utilization; Spinosa, L.; Vesilind, P.A. Eds.; IWA Publishing: London, 2001; 3–18.
Spinosa, L. Evolution of sewage sludge regulations in Europe. Water Science and Technology 2001, 44(10), 1–8.
Lee, D.J.; Liu, J.C. Route to synthesize the sludge management processes. Water Science and Technology 2004, 49(10), 259–266.
Léonard, A.; Blacher, S.; Marchot, P.; Crine, M. Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. Drying Technology 2002, 20(4–5), 1053–1069.
Léonard, A.; Blacher, S.; Pirard, R.; Marchot, P.; Pirard, J.P.; Crine, M. Multiscale texture characterization of wastewater sludges dried in a convective rig. Drying Technology 2003, 21(8), 1507–1526.
Léonard, A.; Blacher, S.; Marchot, P.; Pirard, J.P.; Crine, M. Measurement of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Drying Technology 2004, 22(7), 1695–1708.
Léonard, A.; Blacher, S.; Marchot, P.; Pirard, J.P.; Crine, M. Convective drying of wastewater sludges: Influence of air temperature, superficial velocity, and humidity on the kinetics. Drying Technology 2005, 23(8), 1667–1679.
Tao, T.; Peng, X.F.; Lee, D.J. Thermal drying of wastewater sludge: Change in drying area owing to volume shrinkage and crack development. Drying Technology 2005, 23(3), 669–682.
Tao, T.; Peng, X.F.; Lee, D.J. Structure of crack in thermally dried sludge cake. Drying Technology 2005, 23(7), 1555–1568.
Arlabosse, P.; Chavez, S.; Lecomte, D. Method for thermal design of paddle dryers: Application to municipal sewage sludge. Drying Technology 2004, 22(10), 2375–2393.
Reyes, A.; Eckholt, M.; Troncoso, F.; Efremov, G. Drying kinetics of sludge from a wastewater treatment plant. Drying Technology 2004, 22(9), 2135–2150.
Font, R.; Gomez-Rico, M.F.; Fullana, A. Skin effect in the heat and mass transfer model for sewage sludge drying. Separation and Purification Technology 2011, 77(1), 146–161.
Bennamoun, L.; Crine, M.; Léonard, A. Convective drying of wastewater sludge: Introduction of shrinkage effect in mathematical modeling. Drying Technology 2013, 31(6), 643–654.
Bennamoun, L.; Fraikin, L.; Léonard, A. Modeling and simulation of heat and mass transfer during convective drying of wastewater sludge with introduction of shrinkage phenomena. Drying Technology 2014, 32(1), 13–22.
Hsu, J.P.; Tao, T.; Su, A.; Mujumdar, A.S.; Lee, D.J. Model for sludge cake drying accounting for developing cracks. Drying Technology 2010, 28(7), 922–926.
Léonard, A.; Meneses, E.; Le Trong, E.; Salmon, T.; Marchot, P.; Toye, D.; Crine, M. Influence of back mixing on the convective drying of residual sludges in a fixed bed. Water Research 2008, 42(10–11), 2671–2677.
Berghel, J.; Renstrom, R. Basic design criteria and corresponding results performance of a pilot-scale fluidized superheated atmospheric condition steam dryer. Biomass and Bioenergy 2002, 23(2), 103–112.
Srinivasakannan, C.; Balasubramaniam, N. Drying of rubber wood sawdust using tray dryer. Particulate Science and Technology 2006, 24(4), 427–439.
Arlabosse, P.; Ferrasse, J.H.; Lecomte, D.; Crine, M.; Dumont, Y.; Léonard, A. Efficient sludge thermal processing: From drying to thermal valorization. In Modern Drying Technology: Vol. 4. Energy Savings; Tsotsas, E.; Mujumdar, A.S. Eds.; Wiley-VCH: Weinheim, Germany, 2011; 295–329.
Garboczi, E.J. Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete. Cement and Concrete Research 2002, 32(10), 1621–1638.
Denis, E.P.; Barat, C.; Jeulin, D.; Ducottet, C. 3D complex shape characterization by statistical analysis: Application to aluminium alloys. Materials Characterization 2008, 59(3), 338–343.
Lin, C.L.; Miller, J.D. 3D characterization and analysis of particle shape using X-ray microtomography (XMT). Powder Technology 2005, 154(1), 61–69.
Job, N.; Sabatier, F.; Pirard, J.P.; Crine, M.; Léonard, A. Towards the production of carbon xerogel monoliths by optimizing convective drying conditions. Carbon 2006, 44(12), 2534–2542.
Aferka, S.; Marchot, P.; Crine, M.; Toye, D. Interfacial area measurement in a catalytic distillation packing using high energy X-ray CT. Chemical Engineering Science 2010, 65(1), 511–516.
Almazán, M.C.; Léonard, A.; López-Garzón, J.; Abdullah, J.; Marchot, P.; Blacher, S. 3D characterisation of the structure of activated carbon packed beds using X-ray microtomography. In 3rd International Workshop on Process Tomography (IWPT-3), Tokyo, Japan, April 17–19, 2009.
Toye, D.; Marchot, P.; Crine, M.; Pelsser, A.M.; L'Homme, G. Local measurements of void fraction and liquid hold-up in packed columns using X-ray computed tomography. Chemical Engineering and Processing 1998, 37(6), 511–520.
American Society of Agricultural Engineers. ASAE Standard No. D245.5: Moisture relationships of plant-based agricultural products; American Society of Agricultural Engineers: St. Joseph, MI, 1996.
Fraikin, L.; Herbreteau, B.; Chaucherie, X.; Nicol, F.; Crine, M.; Léonard, A. Impact of storage at 4°C on the study of sludge drying emissions. In 2nd European Conference on Sludge Management, Budapest, Hungary, September 9–10, 2010.
Li, J.; Bennamoun, L.; Fraikin, L.; Salmon, T.; Toye, D.; Schreinemachers, R.; Léonard, A. Analysis of the shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Drying Technology 2014, 32(14), 1706–1717.
Léonard, A.; Blandin, G.; Crine, M. Importance of rheological properties when drying sludge in a fixed bed. In 4th Inter-American Drying Conference: Challenges for Efficient Drying Processes, Montreal, Canada, August 23–27, 2009.
Toye, D.; Crine, M.; Marchot, P. Imaging of liquid distribution in reactive distillation packings with a new high-energy X-ray tomograph. Measurement Science and Technology 2005, 16(11), 2213–2220.
Otsu, N. A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man, and Cybernetics 1979, 9(1), 62–67.
Huron, Y.; Salmon, T.; Blandin, G.; Crine, M.; Léonard, A. Effect of liming on the convective drying of urban residual sludges. Asia-Pacific Journal of Chemical Engineering 2010, 5(6), 909–914.
Vaxelaire, J.; Puiggali, J.R. Analysis of the drying of residual sludge: From the experiment to the simulation of a belt dryer. Drying Technology 2002, 20(4–5), 989–1008.
Sherwood, T.K. The drying of solids—II. Industrial and Engineering Chemistry 1929, 21(10), 976–980.
Deng, W.; Li, X.; Yan, J.; Wang, F.; Chi, Y.; Cen, K. Moisture distribution in sludges based on different testing methods. Journal of Environmental Sciences 2011, 23(5), 875–880.
Li, J.; Fraikin, L.; Salmon, T.; Plougonven, E.; Toye, D.; Léonard, A. Convective drying behavior of sawdust–sludge mixtures in a fixed bed. In Fourth European Conference on Sludge Management—ECSM 2014, İzmir, Turkey, May 26–27, 2014.
Schultz, P.; Schlünder, E.U. Influence of additives on crust formation during drying, influence of additives on crust formation during drying. Chemical Engineering and Processing: Process Intensification 1990, 28(2), 133–142.
Gac, J.M.; Gradoń, L. A distributed parameter model for the spray drying of multicomponent droplets with a crust formation. Advanced Powder Technology 2013, 24(1), 324–330.
