Aferka, S., Saroha, A., Toye, D., Marchot, P., Crine, M., 2006. Liquid flow distribution in catalytic distillation columns: use of high-energy X-ray tomography. In: Proceedings of AIChE Annual Meeting, Conference, 12-17 November 2006, San Francisco, CA, United States.
Aferka S., Marchot P., Crine M., Toye D. Interfacial area measurement in a catalytic distillation packing using high energy X-ray CT. Chem. Eng. Sci. 2010, 65:511-516.
ASAE, 1996. ASAE Standard no. D245.5: Moisture relationships of plant-based agricultural products. In: Joseph, St., (Ed.). American Society of Agricultural Engineers, MI, USA, pp. 452-464.
Athe P., Shakya S., Munshi P., Luke A., Mewes D. Characterization of multiphase flow in bubble columns using KT-1 signature and fractal dimension. Flow Meas. Instrum. 2013, 33:122-137.
Bennamoun L., Crine M., Léonard A. Convective drying of wastewater sludge: introduction of shrinkage effect in mathematical modeling. Dry. Technol. 2013, 31:643-654.
Bouguer P. Essai d'optique sur la Gradation de la Lumière 1729, Claude Jombert, Paris, France.
Brown K., Schluter S., Sheppard A., Wildenschild D. On the challenges of measuring interfacial characteristics of three-phase fluid flow with X-ray microtomography. J. Microsc. 2014, 253:171-182.
Calvo S., Beugre D., Crine M., Léonard A., Marchot P., Toye D. Phase distribution measurements in metallic foam packing using X-ray radiography and micro-tomography. Chem. Eng. Prog. 2009, 48:1030-1039.
Davit Y., Iltis G., Debenest G., Veran-Tissoires S., Wildenschild D., Gerino M., Quintard M. Imaging biofilm in porous media using X-ray computed microtomography. J. Microsc. 2011, 242:15-25.
Foumeny E.A., Roshani S. Mean voidage of packed beds of cylindrical particles. Chem. Eng. Sci. 1991, 46:2363-2364.
Ford J.J., Heindel T.J., Jensen T.C., Drake J.B. X-ray computed tomography of a gas-sparged stirred-tank reactor. Chem. Eng. Sci. 2008, 63:2075-2085.
Franka N.P., Heindel T.J. Local time-averaged gas holdup in a fluidized bed with side air injection using X-ray computed tomography. Powder Technol. 2009, 193:69-78.
Fraikin, L., Herbreteau, B., Chaucherie, X., Nicol, F., Crine, M., Léonard, A., 2010. Impact of storage at 4°C on the study of sludge drying emissions. In: Proceedings of the 2nd European Conference on Sludge Management, 9-10 September 2010, Budapest, Hungary.
Gulati S., Behling M., Munshi P., Luke A., Mewes D. Tomographic KT-1 signature of phase-fraction distributions in multiphase bubble columns. Flow Meas. Instrum. 2010, 21:249-254.
Hasatani M., Ltaya Y., Muroie K., Taniguchi S. Contraction characteristics of molded ceramics during drying. Dry. Technol. 1993, 11:815-830.
Kak A.C., Slaney M. Principles of Computerized Tomographic Imaging 1988, IEEE Press, New York.
Léonard A., Blacher S., Marchot P., Crine M. Use of X-ray microtomography to follow the convective heat drying of wastewater sludges. Dry. Technol. 2002, 20:1053-1069.
Léonard A., Blacher S., Marchot P., Pirard J.P., Crine M. Image analysis of X-ray microtomograms of soft materials during convective drying. J. Microsc. 2003, 212:197-204.
Léonard A., Vandevenne P., Salmon T., Marchot P., Crine M. Wastewater sludge convective drying: influence of sludge origin. Environ. Technol. 2004, 25:1051-1057.
Léonard A., Blacher S., Marchot P., Pirard J.P., Crine M. Measurement of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Dry. Technol. 2004, 22:1695-1708.
Léonard A., Meneses E., Le Trong E., Crine M. Influence of back mixing on the convective drying of residual sludges in a fixed bed. Water Res. 2008, 42:2671-2677.
Léonard A., Crine M., Stepanek F. Use of X-Ray tomography for drying-related applications. Modern Drying Technology, Volume 4: Energy Savings 2011, Wiley-VCH, Weinheim, Germany. E. Tsotsas, A.S. Mujumdar (Eds.).
Li J., Bennamoun L., Fraikin L., Salmon T., Toye D., Schreinemachers R., Léonard A. Analysis of the shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Dry. Technol. 2014, 32:1706-1717.
Li, J., Fraikin, L., Salmon, T., Plougonven, E., Toye, D., Léonard, A., 2014b. Convective drying behavior of sawdust/sludge mixtures in a fixed bed. In: Proceedings of the 4th European Conference on Sludge Management (ECSM 2014), 26-27 May 2014, K{double-struck} Kzmir, Turkey.
Li, J., Fraikin, L., Salmon, T., Toye, D., Léonard, A., 2014c. Convective drying of sawdust/sludge mixtures in a fixed bed: the effect of sludge origin. In: Proceedings of the 19th International Drying Symposium (IDS 2014), 24-27 August 2014, Lyon, France.
Li J., Fraikin L., Salmon T., Bennamoun L., Toye D., Schreinemachers R., Léonard A. Investigation on convective drying of mixtures of sewage sludge and sawdust in a fixed bed. Dry. Technol. 2015, 33:704-712.
Mahr B., Mewes D. CFD modelling and calculation of dynamic two-phase flow in columns equipped with structured packing. Chem. Eng. Res. Des. 2007, 85:1112-1122.
Marchot P., Toye D., Crine M., L'Homme G., Pelsser A.M., Olujic Z. Liquid distribution images on structured packing by x-ray computed tomography. AIChE J. 2001, 47:1471-1476.
Mayor L., Sereno A.M. Modelling shrinkage during convective drying of food materials: a review. J. Food Eng. 2004, 61:373-386.
Otsu N. A threshold selection method from gray-level histograms. IEEE Trans. Syst. Man Cybern. 1979, 9:62-67.
Parrilli A., Pagani S., Maltarello M.C., Santi S., Salerno A., Netti P.A., Giardino R., Rimondini L., Fini M. Three-dimensional cellular distribution in polymeric scaffolds for bone regeneration: a microCT analysis compared to SEM, CLSM and DNA content. J. Microsc. 2014, 255:20-29.
Pauwels E., Van Loo D., Cornillie P., Brabant L., Van Hoorebeke L. An exploratory study of contrast agents for soft tissue visualization by means of high resolution X-ray computed tomography imaging. J. Microsc. 2013, 250:21-31.
Putranto A., Chen X.D., Webley P.A. Modeling of drying of food materials with thickness of several centimeters by the reaction engineering approach (REA). Dry. Technol. 2011, 29:961-973.
Rémond R., Perré P., Mougel E. Using the concept of thin dry layer to explain the evolution of thickness, temperature and moisture content during convective drying of Norway spruce boards. Dry. Technol. 2005, 23:249-271.
Schmit C.E., Cartmel D.B., Eldridge R.B. The experimental application of X-ray tomography to a vapor-liquid contactor. Chem. Eng. Sci. 2001, 56:3431-3441.
Schmit C.E., Eldridge R.B. Investigation of X-ray imaging of vapor-liquid contactors. 1. Studies involving stationary objects and a simple flow system. Chem. Eng. Sci. 2004, 59:1255-1266.
Schmit C.E., Perkins J., Eldridge R.B. Investigation of X-ray imaging of vapor-liquid contactors. 2. Experiments and simulations of flows in an air-water contactor. Chem. Eng. Sci. 2004, 59:1267-1283.
Tao T., Peng X.F., Lee D.J. Thermal drying of wastewater sludge: change in drying area owing to volume shrinkage and crack development. Dry. Technol. 2005, 23:669-682.
Tao T., Peng X.F., Lee D.J. Structure of crack in thermally dried sludge cake. Dry. Technol. 2005, 23:1555-1568.
Tao T., Peng X.F., Lee D.J. Skin layer on thermally dried sludge cake. Dry. Technol. 2006, 24:1047-1052.
Toye D., Marchot P., Crine M., Pelsser A.M., L'Homme G. Local measurements of void fraction and liquid hold-up in packed columns using x-ray computed tomography. Chem. Eng. Prog. 1998, 37:511-520.
Toye D., Crine M., Marchot P. Imaging of liquid distribution in reactive distillation packings with a new high-energy X-ray tomograph. Meas. Sci. Technol. 2005, 16:2213-2220.
van Meel D.A. Adiabatic convection batch drying with recirculation of air. Chem. Eng. Sci. 1958, 9:36-44.
Vaxelaire J., Bongiovanni J.-M., Mousques P., Puiggali J.R. Thermal drying of residual sludge. Water Res. 2000, 34:4318-4323.
Viva A., Aferka S., Brunazzi E., Marchota P., Crine M., Toye D. Processing of X-ray tomographic images: a procedure adapted for the analysis of phase distribution in Mellapak Plus 752.Y and Katapak-SP packings. Flow Meas. Instrum. 2011, 22:279-290.
Zou R.P., Yu A.B. The packing of spheres in a cylindrical container: the thickness effect. Chem. Eng. Sci. 1995, 50:1504-1507.
