“Product-oriented engineering” applied to the development of porous scaffolds for tissue engineering

de Bien, Charlotte; Ounally, T; Collard, Valérie; Jérôme, Christine; Léonard, Angélique; Toye, Dominique

Request a copy

Paper published in a journal (Scientific congresses and symposiums)

“Product-oriented engineering” applied to the development of porous scaffolds for tissue engineering

de Bien, Charlotte; Ounally, T; Collard, Valérie et al.

2014 • In World Congress in Industrial Process Tomography

Peer reviewed

Permalink
https://hdl.handle.net/2268/183148

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

“Product-oriented engineering” applied to the development of porous scaffolds for tissue engineering.pdf

Publisher postprint (644.28 kB)

Request a copy

All documents in ORBi are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Keywords :

Biopolymer porous scaffolds; Microstructure 3D; Permeability; Polylactic acid; Tissue engineering; X-ray microcomputed tomography; Young’s modulus; Computerized tomography; Elastic moduli; Mechanical permeability; Microstructure; Polyesters; Polymer blends; Scaffolds (biology); Tissue; Tomography; End-use properties; Freeze-drying process; Microcomputed tomography; Operating condition; Poly lactic acid; Porous scaffold; Tension compressions; X ray microtomography

Abstract :

[en] This work applies a “product-oriented engineering” approach to the development of porous scaffolds for tissue engineering. Polylactic acid scaffolds were obtained by a freeze-drying process. Their 2D/3D microstructure was characterized by X-ray microtomography and related to the operating conditions used. Two types of scaffold end-use properties were characterized in relation to their microstructure: the mechanical and the transport properties. Scaffold young's modulus was computed from data measured on tension-compression devices. To evaluate the permeability, Darcy’s experiments were carried out. The obtained results allowed highlighting the quantitative relationships existing between elaboration conditions, microstructure and end-use properties of the fabricated PLA scaffolds. © 2014 International Society for Industrial Process Tomography.

Disciplines :

Chemical engineering

Author, co-author :

de Bien, Charlotte ; Université de Liège > Département de chimie appliquée > Génie chimique - Procédés et développement durable

Ounally, T

Collard, Valérie ; Université de Liège > Centre d'études et de rech. sur les macromolécules (CERM)

Jérôme, Christine ; Université de Liège > Département de chimie (sciences) > Chimie des macromolécules et des matériaux organiques (CERM)

Léonard, Angélique ; Université de Liège > Département de chimie appliquée > Génie chimique - Procédés et développement durable

Toye, Dominique ; Université de Liège > Département de chimie appliquée > Génie de la réaction et des réacteurs chimiques

Language :

English

Title :

“Product-oriented engineering” applied to the development of porous scaffolds for tissue engineering

Publication date :

2014

Event name :

7th World Congress in Industrial Process Tomography

Event place :

Krakow, Poland

Event date :

du 02 septembre 2013 au 05 septembre 2013

Journal title :

World Congress in Industrial Process Tomography

Peer reviewed :

Peer reviewed

Available on ORBi :

since 23 June 2015

Statistics

Number of views

58 (8 by ULiège)

Number of downloads

3 (2 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

Bibliography

Chou, L., Mann, R., Coughlin, M., Mcpeake, W., Mizel, M., 2007. Stress fracture as a complication of autogenous bone graft harvest from the distal tibia, Baltimore: Williams Wilkins.
Laurencin, C., Khan, Y., El-Amin, S.F., 2005. Bone graft substitutes, Expert Review of Medical Devices 3, p. 49.
Maquet, V., Jérôme, R., 1997. Porous Materials for Tissue Engineering, in Liu D.-M., Dixit V., Editors. Uetikon-Zuerich: Trans Tech Publications Ltd, pp. 15-42.
Freyman, T.M., Yannas, I.V., Gibson, L.J., 2001. Cellular materials as porous scaffolds for tissue engineering, Progress in Materials Science 46, pp. 273-282.
Razak, S.I.A., Sharif, N.F.A., Rahman, W.A.W., 2012. Biodegradable Polymers and their Bone Applications: A review, International Journal of Basic & Applied Sciences IJBAS-IJENS 12, pp. 31-49.
Gogolewski, S., Pineda, L., Busing, C.M., 2000. Bone regeneration in segmental defects with resorbable polymeric membrane IV. Does the polymer chemical composition affect the healing process?, Biomaterials 21, pp. 2513-2520.
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., Kumar, D.S., 2011. Polymeric Scaffolds in Tissue Engineering Application: A review, International Journal of Polymer Science, pp. 1-19.
Maquet, V., Martin, D., Malgrange, B., Franzen, R., Schoenen, J., Moonen, G., Jérôme, R., 2000. Peripheral nerve regeneration using bioresorbable macroporous polylactide scaffolds, Journal of Biomedical Materials Research 52, pp. 639-651.
Maquet, V., Martin, D., Scholtes, F., Schoenen, J., Moonen, G., Jérôme, R., 2001. Poly(D,L-lactide) foams modified by poly(ethylene oxide)-block-poly(DL-lactide) copolymers and a-FGF: in vitro and in vivo evaluation for spinal cord regeneration, Biomaterials 22, pp. 1137-1146.
Oshima, Y., Harwood, F.L., Coutts, R.D., Kubo, T., Amiel, D., 2009 Variation of Mesenchymal Cells in Polylactic Acid Scaffold in an Osteochondral Repair Model, Tissue Engineering 15: Part C, pp. 595-604.
Maquet, V., Blacher, S., Pirard, R., Pirard, J.-P., Jérôme, R., 2000. Characterization of Porous Polylactide Foams by Image Analysis and Impedance Spectroscopy, Langmuir 16, pp. 10463-10470.
Lasprilla, A.J., Martinez, G.A., Lunelli, B.H., Jardini, A.L., Filho, R.M., 2012. Poly-lactic acid synthesis for application in biomedical devices - A review, Biotechnology Advances 30, pp. 321-328.
Schugens, C., Maquet, V., Grandfils, C., Jérôme, R., Teyssié, P., 1996. Biodegradable and macroporous polylactide implants for cell transplantation: I. Preparation of macroporous polylactide supports by solid-liquid phase separation, Polymer 37, pp. 1027-1038.
Schugens, C., Maquet, V., Grandfils, C., Jérôme, R., Teyssié, P., 1996. Polylactide macroporous biodegradable implants for cell transplantation: II. Preparation of polylactide foams by liquid-liquid phase separation, Journal of Biomedical Materials Research 30, pp. 449-461.
Gobin, A.S., Froude, V.E., Mathur, A.B., 2005. Structural and mechanical characteristics of silk fibroin and chitosan blend scaffolds for tissue regeneration, Journal of Biomedical Materials Research Part A, pp. 74 465.
Ochoa, I., Sanz-Herrera, J.A., Garcia-aznar, J.M., Doblare, M., Yunos, D.M., Boccaccini, A.R., 2009. Permeability evaluation of 45S5 Bioglass-based scaffolds for bone tissue engineering, Journal of Biomechanics 42, pp. 257-260.
Despois, J., Mortensen, A., 2005. Permeability of open-pore microcellular materials, Acta Materialia 53, pp. 1381-1388.
Jones, J. R., Poologasundarampillai, G., Atwood, R.C., Bernard, D., Lee, P.D., 2007. Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds, Biomaterials 28, pp. 1404-1413.
Dias, M.R., Fernandes, P.R., Guedes, J.M., Hollister, S.J., 2012. Permeability analysis of scaffolds for bone tissue engineering, Journal of Biomechanics 45, pp. 938-944.
Lee, N.K., Oh, H.J., Hong, C.M., Suh, H., Hong, S.H., 2009. Comparison of the synthetic biodegradable polymers, polylactide (PLA), and polylactic-co-glycolic acid (PLGA) as scaffolds for artificial cartilage, Biotechnology and Bioprocess Engineering 14, pp. 180-186.
Pan, Z., Ding, J., 2012. Poly(lactide-co-glycolide) porous scaffolds for tissue engineering and regenerative medicine, Interface Focus 2, pp. 366-377
Jiang, T., Nukavarapu, S.P., Deng, M., Jabbarzadeh, E., Kofron, M.D., Doty, S.B., Abdel-Fattah, W.I., Laurencin, C.T., 2010. Chitosan-poly(lactide-co-glycolide) microsphere-based scaffolds for bone tissue engineering: In vitro degradation and in vivo bone regeneration studies, Acta Biomateriala 6, p. 3457.
Croisier, F., Jérôme, C., 2013. Chitosan-based biomaterials for tissue engineering, European Polymer Journal 49, pp. 780-792.
Grandfils, C., Flandroy, P., Jérôme, R., 1996. Control of the biodegradation rate of poly(dl-lactide) microparticles intended as chemoembolization materials, Journal of Controlled Release 38, pp. 109-122.
Lu, L., Peter, S.J., Lyman, M.D., Lai, H.-L., Leite, S.M., Tamada, J.A., Uyama, S., Vacanti, J.P., Langer, R., Mikos, A.G., 2000. In vitro and in vivo degradation of porous poly(DL-lactic-co-glycolic acid) foams, Biomaterials 21, pp. 1837-1845.
Wu, L., Ding, J., 2004. In vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering, Biomaterials 25, pp. 5821-5830.