M. Gavagni, P. Gardonio, and S. J. Elliott, "Theoretical study of a velometer sensor-piezoelectric patch actuator pair for direct velocity feedback control systems," Dept. Electr. Eng., Univ. Southampton, Southampton, U.K., Tech. Rep. 303, 2004.
P. Gardonio, E. Bianchi, and S. J. Elliott, "Smart panel with multiple decentralized units for the control of sound transmission. Part II: Design of the decentralized control units," J. Sound Vibrat., vol. 274, nos. 1-2, pp. 193-213, 2004.
Y. Aoki, P. Gardonio, M. Gavagni, C. Galassi, and S. J. Elliott, "Parametric study of a piezoceramic patch actuator for proportional velocity feedback control loop," J. Vibrat. Acoust., vol. 132, no. 6, pp. 1-10, 2010.
S. J. Elliott, P. Gardonio, T. J. Sors, and M. J. Brennan, "Active vibroacoustic control with multiple local feedback loops," J. Acoust. Soc. Amer., vol. 111, no. 2, pp. 908-915, 2002.
E. Bianchi, P. Gardonio, and S. J. Elliott, "Smart panel with multiple decentralized units for the control of sound transmission. Part III: Control system implementation," J. Sound Vibrat., vol. 274, nos. 1-2, pp. 215-232, 2004.
P. Gardonio, A. Aoki, and S. J. Elliott, "A smart panel with active damping wedges along the perimeter," Smart Mater. Struct., vol. 19, no. 6, pp. 065033-1-065033-15, 2010.
A. Preumont, Vibration Control of Active Structures, 2nd ed. London, U.K.: Kluwer, 2002.
V. Jayachandran and J. Q. Sun, "Unconditional stability domains of control systems using dual actuator-sensor pairs," J. Sound Vibrat., vol. 208, no. 1, pp. 159-166, 1997.
M. J. Balas, "Feedback control of flexible systems," IEEE Trans. Autom. Control, vol. 23, no. 4, pp. 673-679, Aug. 1978.
G. Gatti, M. Brennan, and P. Gardonio, "Active damping of a beam using a physically collocated accelerometer and piezoelectric patch actuator," J. Sound Vibrat., vol. 303, nos. 3-5, pp. 798-813, 2007.
M. J. Brennan, S. J. Elliott, and R. J. Pinnington, "The dynamic coupling between piezoceramic actuators and a beam," J. Acoust. Soc. Amer., vol. 102, no. 4, pp. 1931-1942, 1997.
P. Gardonio, M. Gavagni, and S. J. Elliott, "Velocity sensor with an internal feedback control loop," J. Smart Mater. Struct., vol. 14, no. 6, pp. 1517-1525, 2005.
P. Gardonio, M. Gavagni, and A. Bagolini, "Seismic velocity sensor with an internal sky-hook damping feedback loop," IEEE Sensors J., vol. 8, no. 11, pp. 1776-1784, Nov. 2008.
S. E. Alper, K. Azgin, and T. Akin, "A high-performance silicon-oninsulator MEMS gyroscope operating at atmospheric pressure," Sensors Actuat. A, vol. 135, no. 1, pp. 34-42, 2007.
S. E. Alper, Y. Temiz, and T. Akin, "A compact angular rate sensor system using a fully decoupled silicon-on-glass MEMS gyroscope," J. Microelectromech. Syst., vol. 17, no. 6, pp. 1418-1429, 2008.
K. Sahin, S. Sahin, S. E. Alper, and T. Akin, "A wide-bandwidth and high-sensitivity robust microgyroscope," J. Micromech. Microeng., vol. 19, no. 7, pp. 074004-1-074004-8, 2009.
C. Acar and A. Shkel, "Four degrees-of-freedom micromachined gyroscopes," J. Model. Simul. Microsyst., vol. 2, no. 1, pp. 71-82, 2001.
C. Acar and A. Shkel, "Nonresonant micromachined gyroscopes with structural mode-decoupling," IEEE Sensors J., vol. 3, no. 4, pp. 497-506, Aug. 2003.
C. Acar, C. Painter, A. Schofield, and A. Shkel, "Robust micromachined gyroscopes for automotive applications," in Proc. Nanotech Conf., vol. 3. 2005, pp. 375-378.
S. Joen, J. Lee, H. Jung, H. Chang, and Y. Kim, "Two-mass system with wide bandwidth for SiOG (si1icon on glass) vibratory gyroscopes," in Proc. 13th Int. Conf. Solid-State Sensors Actuat. Microsyst., Jun. 2005, pp. 539-542.
C. Acar and A. Shkel, "Inherently robust micromachined gyroscopes with 2-DOF sense-mode oscillator," J. Microelectromech. Syst., vol. 15, no. 2, pp. 380-387, 2006.
A. Schofield, A. Trusov, and A. Shkel, "Multi-degree of freedom tuning fork gyroscope demonstrating shock rejection," in Proc. IEEE Sensors, Oct. 2007, pp. 120-123.
A. Schofield, A. Trusov, and A. Shkel, "Effects of operational frequency scaling in multi-degree of freedom MEMS gyroscopes," IEEE Sensors J., vol. 8, no. 10, pp. 1672-1680, Oct. 2008.
Z. Wong, J. Yan, K. Soga, and A. Seshia, "A multi-degree-of-freedom electrostatic MEMS power harvester," in Proc. Power MEMS Conf., Dec. 2009, pp. 300-303.
U. Bartsch, J. Gaspar, and O. Paul, "A 2D electret-based resonant micro energy harvester," in Proc. IEEE 22nd Int. Conf. MEMS, Jan. 2009, pp. 1043-1046.
Y. Zhu, S. Moheimani, and M. Yuce, "A 2-DOF MEMS ultrasonic energy harvester," IEEE Sensors J., vol. 11, no. 1, pp. 155-161, Jan. 2011.
X. Tang and L. Zuo, "Enhanced vibration energy harvesting using dualmass systems," J. Sound Vibrat., vol. 330, no. 21, pp. 5199-5209, 2011.
M. Gavagni, P. Gardonio, and S. J. Elliot, "Design and fabrication of a micro-velocity sensor for direct velocity feedback control systems," in Proc. 6th Int. Symp. Active Noise Vibrat. Control, Sep. 2006, pp. 1-16.
S. Beeby, G. Ensell, M. Kraft, and N. White, MEMS Mechanical Sensors. London, U.K.: Artech House, 2004.
J. C. Lotters, W. Olthuis, P. H. Veltink, and P. Bergveld, "A sensitive differential capacitance to voltage converter for sensor applications," IEEE Trans. Instrum. Meas., vol. 48, no. 1, pp. 89-96, Feb. 1999.
M. Bao and H. Yang, "Squeeze film air damping in MEMS," Sensors Actuat. A, vol. 136, no. 1, pp. 3-27, 2007.
