Reference : Sur la mesure des pressions de coupe lors d'un fraisage en bout
Reports : External report
Engineering, computing & technology : Mechanical engineering
Sur la mesure des pressions de coupe lors d'un fraisage en bout
Debongnie, Jean-François mailto [Université de Liège - ULiège > Département d'aérospatiale et mécanique > Méthodes de fabrication >]
[en] Cutting pressures ; milling ; measure
[en] In turning operations, the measure of cutting pressures does not present difficulties, as these pressures are obtained by dividing by the cutting section the forces whose three components may be measured. The case of milling operations is completely different, firstly because of the tool rotation, and secoundly because the cutting section continually varies. Therefore, the cutting pressure has to be measured indirectly, using a model of the cutting force variation with the cutting section. In this paper, two such models are presented, the first one assuming that the cutting pressure is independent of the cutting section, the second one using Kienzle's model.
Etude de la faisabilité d'une simulation de l'usinage

File(s) associated to this reference

Fulltext file(s):

Open access
LMF-D36.pdfAuthor postprint223.27 kBView/Open

Bookmark and Share SFX Query

All documents in ORBi are protected by a user license.