[en] Most of concrete formulations actually contain mineral additives that are used as an inert filler or supplementary cementitious material (as type II addition). These materials are generally used in order to increase concrete performances both in its fresh and hardened states. The mineral additives usually improve the consistency and workability of fresh concrete and reduce the water demand for a required concrete slump because of an additional volume of fines. The way of action depends on the physical and chemical characteristics of fillers. The study of surface free energies and electric conductivities of interstitial solutions of cement mixes modified by blast furnace slags and limestone fillers contributes to a better knowledge of hardening and interaction process.
Disciplines :
Civil engineering
Author, co-author :
Courard, Luc ; Université de Liège - ULiège > Département ArGEnCo > Matériaux de construction non métalliques du génie civil
Michel, Frédéric ; Université de Liège - ULiège > Département ArGEnCo > Matériaux de construction non métalliques du génie civil
Perkowicz, Sylwia; Warsaw University of Technology
Garbacz, Andrzej; Warsaw University of Technomogy > Department of Building Materials Engineering
Language :
English
Title :
Effects of limestone fillers on surface free energy and electrical conductivity of the interstitial solution of cement mixes
Publication date :
January 2014
Journal title :
Cement and Concrete Composites
ISSN :
0958-9465
eISSN :
1873-393X
Publisher :
Elsevier
Volume :
45
Pages :
111-116
Peer reviewed :
Peer Reviewed verified by ORBi
Name of the research project :
Development and use of self-compacting mortars for the repair of concrete infrastructures (2005-2007)
Funders :
Wallonia Brussels International (Belgium) and Government of Poland
N. Severinghaus S.J. Lefond, Fillers, filters and Absorbents in Industrial Minerals and Rocks 5th ed. 1983 American Institute of Mining, Metallurgical and Petroleum Engineers, Inc. New York 243 257
Courard L, Degeimbre R, Darimont A, Michel F, Willem X, Flamant St. 2005. Some effects of limestone fillers as a partial substitute for cement in mortar composition. In: Banthia N, editor. ConMat'05 third international conference on construction materials: performance, innovations and structural implications. Vancouver, Canada, August 22-24; 2005. p. 10 [Theme 3-Chapter 5].
J. Meerseman, P. Descamps, C. Lucion, J. Piérard, and V. Pollet Characterization of limestone fillers from wallonia for using in concrete technology Ciments, Bétons, Plâtres, Chaux (CBPC) 882 2006 29 36 [in French]
Michel F. Physical characterization of limestone fillers. Master Thesis. Faculté des Sciences Appliquées, Université de liège, Belgium; 2006. p. 204 [in French].
L. Courard, F. Michel, and J. Piérard Influence of clay in limestone fillers for self-compacting cement based composites Constr Building Mater 25 2011 1356 1361
Piérard J, Courard L, Michel F. Durabilité des bétons additionnés de fillers calcaires. Journées scientifiques du Regroupement Francophone pour la Recherche et la Formation dans le domaine du béton, Lausanne, Suisse, 28-29 September; 2008. p. 10 [in French].
Okamura H, Maekawa K, Ozawa K. High performance concrete. 1st ed.; 1993. p. 323.
Baron J, Ollivier J.-P. Les bétons: bases et données pour leur formulation. In: Eyrolles, Paris; 1997. p. 522 [in french].
J.L. Gallias, R. Kara-Ali, and J.P. Bigas The effect of fine mineral admixtures on water requirement of cement pastes Cem Concr Res 30 2000 1543 1549 (Pubitemid 32071545)
I.B. Topcu, and A. Ugurlu Effect of use of mineral filler on the properties of concrete Cem Concr Res 33 2003 1071 1075
M. Heikal, I. Aiad, and I.M. Helmy Portland cement clinker, granulated slag and by-pass cement dust composites Cem Concr Res 32 11 2002 1805 1812
M.N. Haque, D.J. Cook, and D.R. Morgan The influence of admixtures on the surface energy of Portland cement paste Mater Struct 9 4 1976 291 296
Bishnoi S, Scrivener K. Optimised continuum cement hydration modelling. In: Marchand J, Bissonnette B, Gagné R, Jolin M, Paradis F, editors. 2nd International symposium on advances in concrete through science and engineering. Québec, Canada, September 11-13; 2006. p. 63-74.
L. Courard, F. Michel, and M. Martin The evaluation of the surface free energy of liquids and solids in concrete technology Constr Building Mater 25 1 2011 260 266
J. Comyn Contact angles and adhesive bonding Int J Adhes Adhes 12 3 1992 145 149
W. Possart, and H. Kamusewitz The thermodynamics and wetting of real surfaces and their relationship to adhesion Int J Adhes Adhes 13 2 1993 77 84
L. Courard Evaluation of thermodynamic properties of concrete substrates and cement slurries modified with admixtures Mater Struct 35 2002 149 155 (Pubitemid 34684416)
P.J. Tumidalski Electrical conductivity of cement mortars Cem Concr Res 26 4 1996 529 534
A.J. Kinloch Adhesion and adhesives: science and technology 1987 Chapman and Hall London
S. Maximilien, J. Péra, and M. Chabannet Study of the reactivity of clinkers by means of the conductometric test Cem Concr Res 27 1 1997 63 73 (Pubitemid 127407569)
V.L. Bonavetti, V.F. Rahhal, and E.F. Irassar Studies on carboaluminate formation in limestone filler-blended cements Cem Concr Res 31 2001 853 859 (Pubitemid 32544486)
Heirman G, Vandewalle L, Van Gemert D. Influence of mineral additions and chemical admixtures on setting and volumetric autogenous shrinkage of SCC-equivalent mortars. In: De Schutter G, Boël V, editor. 5th International RILEM Symposium on Self Compacting Concrete. Gent, Belgium. September 3-5; 2007. p. 553-558.
A.M. Poppe, and G. De Schutter Cement hydration in the presence of high filler contents Cem Concr Res 35 2005 2290 2299 (Pubitemid 41690201)