Download

Full Text

• 2005, "Pressure Measurement By Crusher Gauges Nato Approved Tests For Crusher Gauges", AEP-23 Ed. 2, NATO Standardization Agency, NATO.
• 1997, "NATO Piezo Gauge Replacement Programme", AC/225(LG/3-SG/1)D/3(Rev.), NATO.
• 2004, "COMBINATION ELECTRONIC PRESSURE, VELOCITY AND ACTION TIME (EPVAT) TEST PROCEDURE", PFP(NAAG-LG/3-SG/1)D1 Ch. 12, NATO.
• 2011, "Edition Synthétique des decisions C.I.P. en vigueur", Bureau Permanent C.I.P., Brussels, Belgium.
• SAAMI/ANSI standards, SAAMI Technical Committee, available at http://www.saami.org, last accessed 30 November 2012.
• National Instruments LabVIEW, http://www.ni.com/labview/, last accessed 30 November 2012.
• Zerilli, F., and Armstrong, R., 1990, "Description of tantalum deformation behavior by dislocation mechanics based constitutive relations", J. Appl. Phys., 68, pp. 1580-1591.
• Johnson, G. R., Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures", Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, pp. 541-547.
• Kolsky, H., 1949, "An Investigation of the Mechanical Properties of Materials at Very High Loading Rates", Proc. Phys. Soc. London, B62, pp. 676.
• Hopkinson, B., 1914, "A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets", Roy. Soc. Phil. Trans., A213, pp. 437-456.
• Meyers, M., 1994, "Dynamic Behavior of Materials", John Wiley & Sons Inc, New York, USA.
• Bai, Y., and Dodd, B., 1992, "Adiabatic Shear Localization", Pergamon Press, UK.
• Banerjee, B., 2005, "An evaluation of plastic flow stress models for the simulation of high-temperature and high-strain-rate deformation of metals", Dept. of Mechanical Engineering, University of Utah, USA.
• ANSYS Autodyn, http://www.ansys.com, last accessed 30 November 2012.