[en] An empirical frictional correction factor to the isentropic nozzle model has been developed for application to refrigerant leakage modeling in scroll, rotary and other similar compressors. This correction factor is derived by calculating the leakage mass flow rate with a compressible, variable area, real gas properties model and referencing the results to an isentropic nozzle model. The ratio of flows is correlated to the Reynolds number, a characteristic length and the leakage gap width. A representative selection of fluids and geometries are employed. For all the correlations, at least 93% of the points are predicted within an absolute error band of 20%.
Disciplines :
Mechanical engineering
Author, co-author :
Bell, Ian ; Université de Liège - ULiège > Département d'aérospatiale et mécanique > Systèmes énergétiques
Groll, Eckhard
Braun, James E.
W. Travis, Horton
Language :
English
Title :
A computationally efficient hybrid leakage model for positive displacement compressors and expanders
T. Afjei, P. Suter, and D. Favrat Experimental analysis of an inverter-driven scroll compressor with liquid injection 1992 Compressor Engineering Conference at Purdue University 1992
Y. Chen, N. Halm, E. Groll, and J. Braun Mathematical modeling of scroll compressor. Part I - compression process modeling Int. J. Refrigeration 25 2002 731 750
N.-K. Cho, Y. Youn, B.-C. Lee, and M.-K. Min The characteristics of tangential leakage in scroll compressors for air-conditioners 15th International Compressor Engineering Conference at Purdue University 2000 No. 807-814
Z. Fan, and Z. Chen A calculating method for gas leakage in compressor 1994 Compressor Conference at Purdue University 1994
N. Ishii, K. Bird, K. Sano, M. Oono, S. Iwamura, and T. Otokura Refrigerant leakage flow evaluation for scroll compressors 1996 Compressor Conference at Purdue University 1996
D.J. Kang, J.W. Kim, and C.B. Sohn Effects of leakage flow model on the thermodynamic performance of a scroll compressor 2002 International Compressor Engineering Conference at Purdue University 2002
B.-C. Lee, T. Yanagisawa, M. Fukuta, and S. Choi A study on the leakage characteristics of tip seal mechanism in the scroll compressor 2002 International Compressor Engineering Conference at Purdue University 2002
E. Lemmon Pseudo-pure fluid equations of state for the refrigerant blends R-410A, R-404A, R-507A, and R-407C Int. J. Thermophys. 24 4 2003 991 1006
E. Lemmon, R.T. Jacobsen, S.G. Penoncello, and D. Friend Thermodynamic properties of air and mixtures of nitrogen, argon, and oxygen from 60 to 2000 K at pressures to 2000 MPa J. Phys. Chem. Ref. Data 29 3 2000 331 385
H. Li, D. Wang, H. Wang, and P. Chen Research of oil-injected scroll compressor working process 1992 Compressor Engineering Conference at Purdue University 1992 pp. 118b1-118b13
D.L. Margolis, S. Craig, G. Nowakowski, and M. Inada Modeling and simulation of a scroll compressor using bond graphs 1992 International Compressor Engineering Conference at Purdue University 1992
R. Puff, and M. Krueger Influence of the main constructive parameters of a scroll compressor on its efficiency 1992 International Compressor Engineering Conference at Purdue University 1992
R. Span, E.W. Lemmon, R.T. Jacobsen, W. Wagner, and A. Yokozeki A reference equation of state for the thermodynamic properties of nitrogen for temperatures from 63.151 to 1000 K and pressures to 2200 K J. Phys. Chem. Ref. Data 29 2000 1361 1433
R. Span, and W. Wagner A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100 K at pressures up to 800 MPa J. Phys. Chem. Ref. Data 25 1996 1509 1596
K. Suefuji, M. Shiibayashi, and K. Tojo Performance analysis of hermetic scroll compressors 1992 International Compressor Engineering Conference at Purdue University 1992
R. Tillner-Roth, and H.D. Baehr A international standard formulation for the thermodynamic properties of 1,1,1,2-tetrafluoroethane (HFC-134a) for temperatures from 170 K to 455 K and pressures up to 70 MPa J. Phys. Chem. Ref. Data 23 1994 657 729
K. Tojo, M. Ikegawa, N. Maeda, S. Machida, M. Shiibayashi, and N. Uchikawa Computer modeling of scroll compressor with self adjusting back-pressure mechanism 1986 International Compressor Engineering Conference at Purdue University 1986
C.-H. Tseng, and Y.-C. Chang Family design of scroll compressors with optimization Appl. Therm. Eng. 26 2006 1074 1086
C. Wassgren ME 510 Gas Dynamics Class Notes 2009 Purdue University Boiler Copy Maker
T. Yanagisawa, and T. Shimizu Leakage losses with a rolling piston type rotary compressor. II. Leakage losses through clearances on rolling piston faces Int. J. Refrigeration 8 3 1985 152 158
Y. Youn, N.-K. Cho, B.-C. Lee, and M.-K. Min The characteristics of tip leakage in scroll compressors for air conditioners 2000 International Compressor Engineering Conference at Purdue University 2000
X. Yuan, Z. Chen, and Z. Fan Calculating model and experimental investigation of gas leakage 1992 International Compressor Engineering Conference at Purdue University 1992