[en] The bi-axial experimental equipment [Flores, P., Rondia, E., Habraken, A.M., 2005a. Development
of an experimental equipment for the identification of constitutive laws (Special Issue). International Journal of Forming Processes] developed by Flores enables to perform Bauschinger shear tests and successive or simultaneous simple shear tests and plane strain tests. Flores investigates the material behavior with the help of classical tensile tests and the ones performed in his bi-axial machine in order to identify the yield locus and the hardening model. With tests performed on one steel grade, the methods applied to identify classical yield surfaces such as [Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic materials. Proceedings of the Royal Society of London A 193, 281–297; Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the 7th North American Metalworking Conf. (NMRC), SME, Dearborn, MI, pp. 191–197] ones as well as isotropic Swift type hardening, kinematic Armstrong–Frederick or Teodosiu and Hu hardening models are explained. Comparison with the Taylor–Bishop–Hill yield locus is also provided. The effect of both yield locus and hardening model choices is presented for two applications: plane strain tensile test and Single Point Incremental Forming (SPIF).
Disciplines :
Materials science & engineering
Author, co-author :
Flores, Paulo
Duchene, Laurent ; Université de Liège - ULiège > Département Argenco : Secteur MS2F > Département Argenco : Secteur MS2F
Bouffioux, Chantal ; Université de Liège - ULiège > Département Argenco : Secteur MS2F > Département Argenco : Secteur MS2F
Lelotte, T.
Henrard, Christophe ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Pernin, N.
Van Bael, A.
He, S.
Duflou, J.
Habraken, Anne ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Language :
English
Title :
Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming
Publication date :
2007
Journal title :
International Journal of Plasticity
ISSN :
0749-6419
Publisher :
Pergamon Press - An Imprint of Elsevier Science, Oxford, United Kingdom
Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. GEGB Report RD/B/N731, Berkeley Nuclear Laboratories.
Banabic B., Bunge H.-J., Pöhlandt K., and Tekkaya A.E. Formability of Metallic Materials (2000), Springer pp. 139-140
Bouvier S., Teodosiu C., Haddadi H., and Tabacaru V. Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains. Journal de Physique IV 105 (2003) 215-222
Bouvier S., Haddadi H., Levée P., and Teodosiu C. Simple shear test: experimental techniques and characterizations of the plastic anisotropy of rolled sheets at large strains. Journal of Material Processing Technology 172 1 (2005) 96-103
Brunet M., Morestin F., and Godereaux S. Nonlinear kinematic hardening identification for anisotropic sheet metals with bending-unbending tests. Journal of Engineering Materials and Technology 123 (2001) 378-383
Duchêne L., de Montleau P., El Houdaigui F., Bouvier S., and Habraken A.M. Analysis of texture evolution and hardening behavior during deep drawing with an improved mixed type FEM element. In: Smith L.M., Pourboghrat F., Yoon J.-W., and Stoughton T.B. (Eds). Proc. of the 6th Inter. Conf. and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, On the Cutting Edge of Technology NUMISHEET, Detroit, MI, USA. AIP 778 (2005) 409-414
Duflou J.R., Szekeres A., and Vanherck P. Force measurements for single point incremental forming: an experimental study. Advanced Materials Research 6-8 (2005) 441-448
Flores, P., 2006, Development of experimental equipment and identification procedures for sheet metal constitutive laws. Ph.D. thesis, ULG, Liège.
Flores P., Rondia E., and Habraken A.M. Development of an experimental equipment for the identification of constitutive laws (Special Issue). International Journal of Forming Processes (2005) 117-137
Flores P., Moureaux P., and Habraken A.M. Material identification using a bi-axial test machine. Advances in Experimental Mechanics IV 3-4 (2005) 91-97
Fratini L., Ambrogio G., Di Lorenzo R., Filice L., and Micari F. Influence of mechanical properties of the sheet material on formability in single point incremental forming. CIRP Annals 53 1 (2004) 207-210
Habraken A.M., and Cescotto S. An automatic remeshing technique for finite element simulation of forming processes. International Journal Numerical Methods in Engineering 30/8 (1990) 1503-1525
Habraken A.M., and Duchêne L. Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity 20 (2004) 1525-1560
Haddadi H., Bouvier S., Banu M., Maier C., and Teodosiu C. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification. International Journal of Plasticity 22 12 (2006) 2226-2271
He S., Van Bael A., Van Houtte P., Szekeres A., Duflou J.R., Henrard C., and Habraken A.M. Finite element modeling of incremental forming of aluminium sheets. Advanced Materials Research 6-8 (2005) 525-532
He S., Van Bael A., Van Houtte P., Tunckol Y., Duflou J., Henrard C., Bouffioux C., and Habraken A.M. Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In: Banabic D. (Ed). Proceedings of the 8th ESAFORM Conference on Material Forming (2005), The Publishing House of the Romanian Academy 711-714
Henrard C., Habraken A.M., Szekeres A., Duflou J.R., He S., Van Bael A., and Van Houtte P. Comparison of FEM simulations for the incremental forming process. Advanced Materials Research 6-8 (2005) 533-542
Hill R. A theory of the yielding and plastic flow of anisotropic materials. Proceedings of the Royal Society of London A 193 (1948) 281-297
Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the 7th North American Metalworking Conf. (NMRC), SME, Dearborn, MI, pp. 191-197.
Hosford W.F. Reflections on the Dependence of Plastic Anisotropy on Texture. Materials Science and Engineering A 257 (1998) 1-8
Hu W. An orthotropic yield criterion in a 3-D general stress state. International Journal of Plasticity 21 (2005) 1771-1796
Iseki H. An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller. Journal of Materials Processing Technology 111 (2001) 150-154
Jeswiet J., Micari F., Hirt G., Bramley A., Duflou J., and Allwood J. Asymmetric single point incremental forming of sheet metal. CIRP Annals (2005) 54/2
Kuwabara T., Ikeda S., and Kuroda K. Measurement and analysis of differential work hardening in cold-rolled steel sheet under bi-axial tension. Journal of Material Processing Technology 80-81 (1998) 517-523
Lelotte, T., Gerday, A.F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A.M., 2005. Axes rotation during simple shear test: measurement and predictions. In: VIII Int. Conf. on Comp. Plasticity (COMPLAS VIII), Barcelona, Spain, pp. 1027-1030.
Li S., Hoferlin E., Van Bael A., Van Houtte P., and Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change. International Journal of Plasticity 19 (2003) 647-674
Marquardt D.W. An algorithm for least-squares estimation of non-linear parameters. Journal of the Society for Industrial and Applied Mathematics 11 (1963) 431-440
Peeters B., Hoferlin E., Van Houtte P., and Aernoudt E. Assessment of crystal plasticity based calculation of lattice spin of polycrystalline metals for FE implementation. International Journal of Plasticity 17 (2001) 819-836
Stoughton T.B., and Yoon J.W. Review of Drucker's postulate and the issue of plastic stability in metal forming. International Journal of Plasticity 22 (2006) 391-433
Teodosiu C., and Hu Z. Microstructure in the continuum modelling of plastic anisotropy. In: Carstensen J.V., Leffers T., Lorentzen T., Pedersen O.B., Sorensen B.F., and Winther G. (Eds). Proceedings of the 19th Riso International Symposium on Materials Science: Modelling of Structure and Mechanics of Materials from Microscale to Product (1998), Riso National Laboratory, Roskilde, Denmark 149-168
Tong W. A plane stress anisotropic plastic flow theory for orthotropic sheet metals. International Journal of Plasticity 22 (2006) 497-535
Van Houtte P. A comprehensive mathematical formulation of an extended Taylor-Bishop-Hill model featuring relaxed constraints, the Renouard-Wintenberger theory and a strain rate sensitivity model. Textures and Microstructures 8-9 (1988) 313-350
Van Houtte, P., 2002. ODFLAM Software. Part of the latest version of MTM-FHM Software System, Katholieke Universiteit Leuven.
Wang, J., Wagoner, R.H., 2004. A new hexahedral solid element for 3D FEM simulation of sheet metal forming. In: Proceedings of the 8th Numiform Conference, vol. 712 (1), pp. 2181-2186.
Yoon J.W., Barlat F., Dick R.E., and Karabin M.E. Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. International Journal of Plasticity 22 (2006) 174-193