Rotation of axes for anisotropic metal in FEM simulations

[en] For the FE simulations relying on elasto-plastic models based on anisotropic yield locus description, it is important for the simulation accuracy to follow a Cartesian reference frame, where the yield locus is expressed. The classical formulations like the Hill 1948 model keep a constant shape of the yield locus when other texture based yield loci regularly update their shape. However in all these cases, the rotation of the Cartesian reference frame must be known. For simple shear tests performed on steel sheets, experimental displacements provide the actual updated position of initial orthogonal grids. The initial and final texture measurements give information on the average crystals rotation. For Hill constitutive law and texture based models, this paper compares the experimental results with different ways to follow the Cartesian reference frame: the co-rotational method, an original method based on the constant symmetric local velocity gradient and the Mandel spin computed by four different methods.

Disciplines :

Materials science & engineering

Author, co-author :

Duchene, Laurent ; Université de Liège - ULiège > Département Argenco : Secteur MS2F > Département Argenco : Secteur MS2F

Lelotte, Thomas

Flores, Paulo

Bouvier, Salima

Habraken, Anne ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo

Language :

English

Title :

Rotation of axes for anisotropic metal in FEM simulations

Publication date :

2008

Journal title :

International Journal of Plasticity

ISSN :

0749-6419

Publisher :

Elsevier Science B.V., Amsterdam, Netherlands

Issue :

Pages :

397–427

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

http://dx.doi.org/10.1016/j.ijplas.2007.03.015

Available on ORBi :

since 08 April 2009

Statistics

Number of views

132 (21 by ULiège)

Number of downloads

472 (25 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

Bibliography

Bacroix B., and Hu Z. Texture evolution during strain path changes in low carbon steel sheets. Metall. Trans. A 26A (1995) 601-613
Bacroix B., Genevois P., and Teodosiu C. Plastic anisotropy in low carbon steels subjected to simple shear with strain path changes. Eur. J. Mech. A/Solids 13 (1994) 661-675
Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic materials. Int. J. Plast. 7 (1991) 693-712
Belytschko T., and Bindeman L.P. Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems. Comput. Methods Appl. Mech. Engrg. 88 (1991) 311-340
Bouvier S., Haddadi H., Levée P., and Teodosiu C. Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains. J. Mater. Process. Technol. 172 (2006) 96-103
Casotto S., Pascon F., Habraken A.M., and Bruschi S. Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. Int. J. Machine Tools Manufact. 45 (2005) 657-664
Castagne S., Remy M., and Habraken A.M. Development of a mesoscopic cell modeling the damage process in steel at elevated temperature. Engrg. Mat. vols. 223-236 (2003), Trans. Tech. Publications, Switzerland 145-150
Castagne S., Pascon F., Bles G., and Habraken A.M. Developments in finite element simulations of continuous casting. J. Phys. IV 120 (2004) 447-455
Cescotto S. Finite deformation of solids. In: Hartley P., Pillinger I., and Sturgess C. (Eds). Numerical Modelling of Material Deformation Processes (1984), Springer-Verlag 20-67
Cescotto S., and Charlier R. Frictional contact finite element based on mixed variational principles. Int. J. Numer. Methods Engrg. 36 (1993) 1681-1701
Dafalias Y.F. Corotational rates for kinematic hardening at large plastic deformation. J. Appl. Mech. ASME 50 (1983) 561-565
Dafalias Y.F. The plastic spin. J. Appl. Mech. ASME 52 (1985) 865-871
Dafalias Y.F. Plastic spin: necessity or redundancy?. Int. J. Plasticity 14 (1998) 909-931
Dai J.S. An historical review of the theoretical development of rigid body displacements from Rodrigues parameters to the finite twist. Mech. Mach. Theory 41 (2006) 41-52
Dawson P.R., Boyce D.E., Hale R., and Durkot J.P. An isoparametric piecewise representation of the anisotropic strength of polycrystalline solids. Int. J. Plasticity 21 (2005) 251-283
Delannay L., Jacques P.J., and Kalidindi S.R. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons. Int. J. Plasticity 22 (2006) 1879-1898
Drean M., Habraken A.M., Bouchair A., and Muzeau J.P. Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour. Comput. Struct. 80 (2002) 2361-2373
Duchêne, L., 2003. FEM study of metal sheets with a texture based, local description of the yield locus. Ph.D. Thesis, Ulg, Liège, Belgium.
Duchêne L., and Habraken A.M. Analysis of the sensitivity of FEM predictions to numerical parameters in deep drawing simulations. Eur. J. Mech. A/Solids 24 (2005) 614-629
Duchêne L., Godinas A., Cescotto S., and Habraken A.M. Texture evolution during deep-drawing processes. J. Mater. Process. Technol. (2002) 110-118
Duchêne, L., de Montleau, P., El Houdaigui, F., Bouvier, S., Habraken, A.M., 2005. Analysis of texture evolution and hardening behavior during deep drawing with an improved mixed type FEM element. In: Smith, L.M., Pourboghrat, F., Yoon, J-W., Stoughton, T.B. (Eds.), Proc. Int. Conf. NUMISHEET 2005, Melville, New York, vol. 1, pp. 409-414.
Duchêne L., El Houdaigui F., and Habraken A.M. Length changes and texture prediction during free end torsion test of copper bars with fem and remeshing techniques. Int. J. Plasticity 23 (2007) 1417-1438
Flores, P., 2005. Development of experimental equipment and identification procedures for sheet metal constitutive laws. Ph.D. Thesis University of Liege, Belgium.
Flores P., Rondia E., and Habraken A.M. Development of experimental equipment for the identification of constitutive laws. Int. J. Form. Process. special issue (2005) 117-137
Gom, 2001. ARAMIS, Deformation measurement using the grating method, GOM mbH, Braunschweig.
Habraken A.M., and Bourdouxhe M. Coupled thermo-mechanical-metallurgical analysis during the cooling of steel pieces. Eur. J. Mech. A/Solids 11 3 (1992) 381-402
Habraken A.M., and Cescotto S. An automatic remeshing technique for finite element simulation of forging processes. Int. J. Numer. Methods Engrg. 30 (1990) 1503-1525
Habraken A.M., and Cescotto S. Contact between deformable solids, the fully coupled approach. Math. Comput. Modell. 28 4-8 (1998) 153-169
Habraken A.M., and Duchêne L. Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. Int. J. Plasticity 20 (2004) 1525-1560
Habraken A.M., Charles J.F., Wegria J., and Cescotto S. Dynamic recrystallization during zinc rolling. Int. J. Form. Process. 1 (1998) 1-20
Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A 193 (1948) 281-297
Hughes T.J.R. Theoretical foundation for large-scale computations of nonlinear material behaviour. In: Nemat-Nasser S., Asaro R.J., and Hegemier G.A. (Eds). Proc. Workshop on Theor. Foundation for Large-Scale Computations of Nonlinear Material Behaviour, Evanston, Illinois (1983), Martinus Nijhoff Publisher, Dordrecht 29-63
Johnson K.I., Nguyen B.N., Davies R.W., Grant G.J., and Khaleel M.A. A numerical process control method for circular-tube hydroforming prediction. Int. J. Plasticity 20 (2004) 1111-1137
Kim D., Barlat F., Bouvier S., Rabahallah M., Balan T., and Chung K. Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate. Int. J. Plasticity 23 (2007) 1380-1399
Li K.P., and Cescotto S. An 8-node brick element with mixed formulation for large deformation analyses. Comput. Methods Appl. Mech. Engrg. 141 (1997) 157-204
Li K.P., Habraken A.M., and Bruneel H. Simulation of square-cup deep-drawing with different finite elements. J. Mater. Process. Technol. 50 (1995) 81-91
Mandel J. Définition d'un repère privilégié pour l'étude des transformations anélastiques du polycrystal. J. Méc. Théo. Appli. 1 (1982) 7
Munhoven S., and Habraken A.M. Application of an anisotropic yield locus based on texture to a deep drawing simulation. In: Shen S.E., and Dawson P.R. (Eds). Simulation of Materials Processing: Theory, Methods and Applications, NUMIFORM 95 (1995), Balkema, Rotterdam
Peeters B., Hoferlin E., Van Houtte P., and Aernoudt E. Assessment of crystal plasticity based calculation of the lattice spin of polycrystalline metals for FE implementation. Int. J. Plasticity 17 (2001) 819-836
Ponthot J.P. Unified stress update algorithms for the numerical simulation of large deformation elasto-plastic and elasto-viscoplatic processes. Int. J. Plasticity 18 (2002) 91-126
Toth L.S., Jonas J.J., Gilormini P., and Bacroix B. Length changes during free end torsion: a rate sensitive analysis. Int. J. Plasticity 6 (1990) 83-108
Van Der Giessen E. Micromechanical and thermodynamic aspects of the plastic spin. Int. J. Plasticity 7 (1991) 365-386
Van Houtte, P., 1994. The 'MTM-FHM' software system, version 2, User's manual, KUL, Leuven.
Van Houtte P. Fast computation of average Taylor factors and Mandel spins for all possible strain modes. Int. J. Plasticity 17 (2001) 807-818
Van Houtte P., Rabet L., 1997. Generalisation of the relaxed constraints models for the prediction of deformation textures. La revue de Métallurgie - CIT/Science et Génie des Matériaux, pp. 1483-1494.
Van Houtte P., and Van Bael A. Convex plastic potentials of fourth and sixth rank for anisotropic materials. Int. J. Plasticity 20 (2004) 1505-1524
Wang, J., Wagoner, R.H., 2004. A new hexahedral solid element for 3D FEM simulation of sheet metal forming. In: Ghosh, S. et al. (Eds.), AIP Conf. Proc., Proc. NUMIFORM, vol. 712, pp. 2181-2186.
Wu H.-C. On stress rate and plasticity constitutive equations referred to a body-fixed coordinate system. Int. J. Plasticity 23 (2007) 1486-1511
Yoon J.W., Barlat F., Dick R.E., Chung K., and Kang T.J. Plane stress yield function for aluminum alloy sheets-part II: FE formulation and its implementation. Int. J. Plasticity 20 (2004) 495-522
Yoon J.W., Barlat F., Gracio J.J., and Rauch E. Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets. Int. J. Plasticity 21 (2005) 2426-2447
Yoon J.W., Barlat F., Dick R.E., and Karabin M.E. Prediction of six or eight ears in a drawn cup based on a new anisotropic function. Int. J. Plasticity 22 (2006) 174-193
Zhu Y.Y., and Cescotto S. Transient thermal and thermomechanical analysis by FEM. Comput. Struct. 53 (1994) 275-304
Zhu Y.Y., and Cescotto S. Unified and mixed formulation of the 4-node quadrilateral elements by assumed strain method: application to thermomechanical problems. Int. J. Numer. Methods Engrg. 38 (1995) 685-716
Zhu Y.Y., and Cescotto S. A fully coupled elasto-visco-plastic damage theory for anisotropic materials. Int. J. Solids Struct. 32 11 (1995) 1607-1641