  | Theunissen, K., Verstraelen, E., Golinval, J.-C., & Denoël, V. (2023). Localization of Structural Damage Based on First Passage Times for a Pre-stressed Steel Strip. In H. Y. Noh (Ed.), Dynamics of Civil Structures, Volume 2 - Proceedings of the 41st IMAC, A Conference and Exposition on Structural Dynamics 2023. Springer. doi:10.1007/978-3-031-36663-5_13  Peer reviewed |
 | Brégand, O., Hardy, Y., Gerkens, P., Golinval, J.-C., Hoffait, S., Bertha, M., Simon, D., Briault, P., & Van Eenennaam, J. (2023). Towards High Speed Galvanizing – Mastering Wiping Conditions Using Hydrodynamic Pads Strip Stabilization. In Proceedings of GALVATECH 2023. Séoul, South Korea: The Corrosion Science Society of Korea (CSSK). |
  | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (03 February 2023). Numerical study of bladed structures with geometric and contact nonlinearities. Journal of Sound and Vibration, 544, 117382. doi:10.1016/j.jsv.2022.117382 Peer Reviewed verified by ORBi |
 | Theunissen, K., Verstraelen, E., Golinval, J.-C., & Denoël, V. (2022). Influence of structural damages on first passage time maps. International Conference on Noise and Vibration Engineering ISMA2022. Peer reviewed |
 | Denis, S., Hoffait, S., Ligot, J., Lengele, M., Mahy, P., de Cazenove, J., & Golinval, J.-C. (2022). Development of an autonomous experimental system to identify BLISK mistuning. In ISMA-USD Conference, Conference Proceedings of ISMA2022 - USD2022. Leuven, Belgium: ISMA-USD Conference. Editorial reviewed |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (05 August 2022). Reduced Order Modeling of Cyclically Symmetric Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 15th World Congress on Computational Mechanics. |
 | Ligot, J., Denis, S., Hoffait, S., De Cazenove, J., & Golinval, J.-C. (2022). DEVELOPMENT OF AN ACOUSTIC EXCITATION TEST BENCH TO SUPPORT THE VALIDATION OF BLADED DISKS. In Proceedings of ASME Turbo Expo 2022 - Volume 8B: Structures and Dynamics — Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration Structures and Dynamics - Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-81933 Peer reviewed Dataset: 10.1115/GT2022-81933 |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2022). Reduced Order Modeling of Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 8th International Conference on Advanced Computational Methods in Engineering. |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of Geometric Nonlinearities Influence On NASA Rotor 37 Response to Blade Tip/Casing Rubbing Events. Journal of Engineering for Gas Turbines and Power. doi:10.1115/1.4051968 Peer Reviewed verified by ORBi |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of geometric nonlinearities influence on NASA rotor 37 response to blade tip/casing rubbing events. In Proceedings of ASME Turbo Expo 2021. doi:10.1115/GT2021-58931 Peer reviewed |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Reduced order modeling of blades with geometric nonlinearities and contact interactions. Journal of Sound and Vibration. doi:10.1016/j.jsv.2021.116037 Peer Reviewed verified by ORBi |
 | Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2020). Comparative Study of Blades Reduced Order Models with Geometrical Nonlinearities and Contact Interfaces. In Proceedings of ASME Turbo Expo 2020. doi:10.1115/GT2020-14882 Peer reviewed |
Delhez, E., Nyssen, F., Batailly, A., & Golinval, J.-C. (June 2019). Comparative Study of Reduced Order Modeling Techniques Applied to Geometrically Nonlinear Structures [Poster presentation]. ASME Turbo Expo 2019, Phoenix, United States - Arizona. |
 | Hoffait, S., Ligot, J., Bertha, M., Moschini S., Simon, D., & Golinval, J.-C. (2019). Poly-Reference Least-Square Complex Frequency Identification Revised to Improve Damping Estimation. In N. Maia, Proceeding of ICEDyn 2019. Lisboa, Portugal: Instituto Superior Técnico. Peer reviewed |
 | Delhez, E., Vanvinckenroye, H., Denoël, V., & Golinval, J.-C. (2019). Experimental and numerical study of the second order moment of the first passage time of a steel strip subjected to forced and parametric excitations. In Proceedings of the International Modal Analysis Conference (IMAC) XXXVII. doi:10.1007/978-3-030-12243-0_7 Peer reviewed |
 | Delhez, E., Vanvinckenroye, H., Golinval, J.-C., & Denoël, V. (2018). Numerical and experimental study of first passage time of a steel strip subjected to forced and parametric excitations. In Proceedings of the 28th International Conference on Noise and Vibration Engineering. Peer reviewed |
 | Hoang Truong, V., Wu, L., Golinval, J.-C., Arnst, M., & Noels, L. (April 2018). Stochastic multiscale model of MEMS stiction accounting for high order statistical moments of non-Gaussian contacting surfaces. Journal of Microelectromechanical Systems, 27 (2), 137-155. doi:10.1109/JMEMS.2018.2797133 Peer Reviewed verified by ORBi |
 | Pustan, M., Birleanu, C., Dudescu, C., & Golinval, J.-C. (2018). Dynamic behavior of smart microelectromechanical systems in industrial applications. In S. Nihtianov & A. Luque (Eds.), Smart Sensors and MEMS - Intelligent Sensing Devices and Microsystems for Industrial Applications (Second Edition, pp. 377-394). Elsevier - Woodhead Publishing. doi:10.1016/B978-0-08-102055-5.00014-0 Peer reviewed |
 | Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 November 2017). A stochastic 3-scale method to predict the thermo-elastic behaviors of polycrystalline structures [Paper presentation]. ECCOMAS Thematic Conference: Computational Modeling of Complex Materials across the Scales (CMCS 2017), Paris, France. |
 | Golinval, J.-C. (2017). Damage Detection in Structures Based on Principal Component Analysis of Forced Harmonic Responses. In Procedia Engineering (pp. 1912-1918). Elsevier. doi:10.1016/j.proeng.2017.09.449 Peer reviewed |
 | Lucas, V., Golinval, J.-C., Voicu, R., Danila, M., Gravila, R., Muller, R., Dinescu, A., Noels, L., & Wu, L. (06 July 2017). Propagation of material and surface profile uncertainties on MEMS micro-resonators using a stochastic second-order computational multi-scale approach. International Journal for Numerical Methods in Engineering, 111 (1), 26-68. doi:10.1002/nme.5452 Peer Reviewed verified by ORBi |
 | Golinval, J.-C. (03 July 2017). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. International Conference on Structural Dynamics - ICEDyn 2017, Ericeira, Portugal. |
Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (05 June 2017). Stochastic multiscale method applied to thermo-elasticity of polycrystalline micro-structures [Paper presentation]. 2017 Engineering Mechanics Institute Conference (EMI 2017), San Diego, United States. |
 | Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (June 2017). A computational stochastic multiscale methodology for MEMS structures involving adhesive contact. Tribology International, 110, 401-425. doi:10.1016/j.triboint.2016.10.007 Peer Reviewed verified by ORBi |
 | Bertha, M., & Golinval, J.-C. (01 May 2017). Identification of non-stationary dynamical systems using multivariate ARMA models. Mechanical Systems and Signal Processing, 88, 166-179. doi:10.1016/j.ymssp.2016.11.024 Peer Reviewed verified by ORBi |
 | Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2017). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In L. V. Starman, J. Hay, ... N. Karanjgaokar (Eds.), Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (Springer International Publishing, pp. 1-8). New York, United States: The Society for Experimental Mechanics, Inc. doi:10.1007/978-3-319-42228-2_1 |
 | Hoffait, S., Marin, F., Simon, D., & Golinval, J.-C. (2016). Virtual Shaker Testing : développement et utilisation en vue d’améliorer la stratégie de contrôle. In AVE2016 - 5ième Colloque Francophone "Analyse Vibratoire Expérimentale". Peer reviewed |
 | Wu, L., Lucas, V., Nguyen, V. D., Golinval, J.-C., Paquay, S., & Noels, L. (01 October 2016). A Stochastic Multi-Scale Approach for the Modeling of Thermo-Elastic Damping in Micro-Resonators. Computer Methods in Applied Mechanics and Engineering, 310, 802-839. doi:10.1016/j.cma.2016.07.042 Peer Reviewed verified by ORBi |
Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 September 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium. |
 | Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (2016). Virtual shaker testing at V2i: measured-based shaker model and industrial test case. In Conference proceedings of ISMA2016 - USD2016. |
Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (20 June 2016). A stochastic 3-Scale approach to study the thermomechanical damping of MEMS [Paper presentation]. Faculty of Science, Technology and Communication; Mathematics Research Unit Seminars, Luxembourg, Luxembourg. |
 | Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., Voicu, R., Baracu, A., & Noels, L. (09 June 2016). Multi-scale stochastic study of the grain orientation and roughness effects on polycrystalline thin structures [Paper presentation]. ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece. |
 | Hoang Truong, V., Paquay, S., Golinval, J.-C., Wu, L., Arnst, M., & Noels, L. (2016). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In Proceedings of the SEM XIII International Congress and Exposition on Experimental and Applied Mechanics. (SEMXIII 2016) (pp. 8). |
 | Nyssen, F., & Golinval, J.-C. (2016). Influence of the inter‐stage coupling flexibility on the dynamics of multi‐stage rotors. In Proceedings of the ASME Turbo Expo 2016. doi:10.1115/GT2016-57212 Peer reviewed |
Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (23 May 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. SMMEG Seminar Series (engs solid mechanics seminars), Oxford, United Kingdom. |
 | Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (03 May 2016). Measured-based shaker model to virtually simulate vibration sine test. Case Studies in Mechanical Systems and Signal Processing, 4, 1-7. doi:10.1016/j.csmssp.2016.04.001 Peer Reviewed verified by ORBi |
 | Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2016). A Study Of Dry Stiction Phenomenon In MEMS Using A Computational Stochastic Multi-scale Methodology. In EuroSimE 2016 in Montpellier (pp. 4). IEEE. doi:10.1109/EuroSimE.2016.7463333 |
 | Elkarous, L., Robbe, C., Pirlot, M., & Golinval, J.-C. (2016). Dynamic calibration of piezoelectric transducers for ballistic high-pressure measurement. International Journal of Metrology and Quality Engineering. doi:10.1051/ijmqe/2016004 Peer Reviewed verified by ORBi |
 | Bertha, M., & Golinval, J.-C. (2016). Time-Varying Modal Parameters Identification in the Modal Domain. In Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering. |
 | Nyssen, F., Epureanu, B., & Golinval, J.-C. (2016). Experimental modal identification of mistuning in an academic two-stage drum. Mechanical Systems and Signal Processing. doi:10.1016/j.ymssp.2016.10.030 Peer Reviewed verified by ORBi |
 | Bertha, M., & Golinval, J.-C. (2016). Multivariate ARMA Based Modal Identification of a Time-varying Beam. In Proceedings of the International Modal Analysis Conference (IMAC) XXXIV. doi:10.1007/978-3-319-30249-2_24 |
 | Hoang Truong, V., Wu, L., Paquay, S., Obreja, A. C., Voicu, R., Müller, R., Golinval, J.-C., & Noels, L. (December 2015). A probabilistic model for predicting the uncertainties of the humid stiction phenomenon on hard materials. Journal of Computational and Applied Mathematics, 289, 173 - 195. doi:10.1016/j.cam.2015.02.022 Peer Reviewed verified by ORBi |
 | Lucas, V., Golinval, J.-C., Paquay, S., Nguyen, V. D., Noels, L., & Wu, L. (01 September 2015). A stochastic computational multiscale approach; Application to MEMS resonators. Computer Methods in Applied Mechanics and Engineering, 294, 141–167. doi:10.1016/j.cma.2015.05.019 Peer Reviewed verified by ORBi |
 | Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., & Noels, L. (09 July 2015). A probabilistic multi-scale model for polycrystalline MEMS resonators [Paper presentation]. 9th European Solid Mechanics Conference, ESMC15, Madrid, Spain. |
 | Nyssen, F., Arnst, M., & Golinval, J.-C. (2015). Experimental Modal Identification of Mistuning in an Academic Blisk and Comparison With The Blades Geometry Variations. Proceedings of the ASME Turbo Expo. doi:10.1115/GT2015-43436 Peer reviewed |
 | Hoang Truong, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). A stochastic multiscale analysis for MEMS stiction failure [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece. |
 | Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). Propagation of uncertainties in the modelling of MEMS resonators (using a 3-scale probabilistic approach) [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece. |
 | Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., Mulay, S., & Noels, L. (25 February 2015). Propagation of uncertainties using probabilistic multi-scale models [Paper presentation]. Euromech 559 Multi-scale computational methods for bridging scales in materials and structures, Eindhoven, Netherlands. |
 | Nyssen, F., & Golinval, J.-C. (2015). Identification of Mistuning and Model Updating of an Academic Blisk Based on Geometry and Vibration Measurements. Mechanical Systems and Signal Processing. doi:10.1016/j.ymssp.2015.08.006 Peer Reviewed verified by ORBi |
 | Golinval, J.-C. (20 November 2014). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. 4ème Colloque "Analyse Vibratoire Expérimentale", Blois, France. |
 | Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (27 August 2014). Prediction of meso-scale mechanical properties of poly-silicon materials [Paper presentation]. EMMC14 - European Mechanics of Materials Conference 2014, Gothenburg, Sweden. |
 | Nyssen, F., Arnst, M., & Golinval, J.-C. (2014). Modeling of Uncertainties in Bladed Disks Using a Nonparametric Approach. Proceedings of the ASME IDETC/CIE 2014. doi:10.1115/DETC2014-35025 Peer reviewed |
 | Bertha, M., & Golinval, J.-C. (July 2014). Experimental modal analysis of a beam travelled by a moving mass using Hilbert Vibration Decomposition [Paper presentation]. 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal. |
Nyssen, F., Arnst, M., & Golinval, J.-C. (July 2014). Nonparametric modelling of multi-stage assemblies of mistuned bladed disks [Paper presentation]. 5th European Conference on Computational Mechanics, Barcelona, Spain. |
 | Hoang Truong, V., Wu, L., Arnst, M., Golinval, J.-C., Muller, R., Voicu, R., & Noels, L. (26 June 2014). A probabilistic model of the adhesive contact forces between rough surfaces in the MEMS stiction context [Paper presentation]. 6th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Ghent, Belgium. |
 | Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., Nguyen, V. D., & Noels, L. (2014). Prediction of macroscopic mechanical properties of a polycrystalline microbeam subjected to material uncertainties. In Á. Cunha, E. Caetano, P. Ribeiro, ... G. Muller (Eds.), Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014 (pp. 2691-2698). |
 | Beckers, R., Nyssen, F., Benabou, H., Viguié, R., Ligot, J., Simon, D., & Golinval, J.-C. (June 2014). Calibration of Gauges for Dynamic Strain Measurements on Compressor Bladed Disks [Poster presentation]. ASME Turbo Expo 2014, Düsseldorf, Germany. |
 | Nyssen, F., Arnst, M., & Golinval, J.-C. (June 2014). Towards a Nonparametric Modelling of Multi-stage Assemblies of Mistuned Bladed Disks [Poster presentation]. ASME Turbo Expo 2014, Düsseldorf, Germany. |
 | Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Damage Detection in Civil Engineering Structure Considering Temperature Effect. In Proceedings of IMAC XXXII Dynamics of Coupled Structures. doi:10.1007/978-3-319-04546-7_22 |
 | Bertha, M., & Golinval, J.-C. (2014). Identification of a Time-varying Beam Using Hilbert Vibration Decomposition. In Proceedings of the International Modal Analysis Conference (IMAC) XXXII. |
 | Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. Shock and Vibration, 2014. doi:10.1155/2014/872492 Peer Reviewed verified by ORBi |
 | Bertha, M., & Golinval, J.-C. (2014). Modal identification of time-varying systems using Hilbert transform and signal decomposition [Paper presentation]. ISMA 2014 conference. |
 | Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (December 2013). Probabilistic model for MEMS micro-beam resonance frequency made of polycrystalline linear anisotropic material [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore. |
 | Elkarous, L., Coghe, F., Pirlot, M., & Golinval, J.-C. (10 September 2013). Experimental techniques for ballistic pressure measurements and recent development in means of calibration. Journal of Physics. Conference Series, 459. doi:10.1088/1742-6596/459/1/012048 Peer Reviewed verified by ORBi |
 | Nyssen, F., Viguié, R., Simon, D., & Golinval, J.-C. (2013). A Methodology for The Appropriation And The Isolation of Nodal Diameter Modes in Cyclic Symmetric Structures. Proceedings of ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013. doi:10.1115/DETC2013-12919 Peer reviewed |
 | Demy, P., Golinval, J.-C., & Simon, D. (19 June 2013). Damage detection in composites by vibrothermography and local resonances. Mechanics and Industry, 14 (2), 137-143. doi:10.1051/meca/2012038 Peer Reviewed verified by ORBi |
 | Nyssen, F., Golinval, J.-C., Viguié, R., & Simon, D. (2013). Excitation of nodal diameter mode-shapes of a stator ring of a turbojet engine using a limited number of excitation sources. Proceedings of ASME Turbo Expo 2013. doi:10.1115/GT2013-94779 Peer reviewed |
 | Nguyen, V. H., Mahowald, J., Golinval, J.-C., & Maas, S. (2013). Detection and Localisation of Damage on Industrially Produced Concrete Slabs Through Time- and Frequency-Domain Approaches. In E. Carrera, F. Miglioretti, ... M. Petrolo (Eds.), 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2013). |
 | Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2013). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. In N. Maia, N. Neves, ... R. Sampaio (Eds.), International Conference on Structural Engineering Dynamics : ICEDyn 2013, Sesimbra 17-19 June 2013. IST/IDMEC. |
 | Wu, L., Noels, L., & Golinval, J.-C. (2013). ON THE MODELING OF ADHESIVE CONTACT AND STICTION FAILURE IN MICRO-SWITCHES. In Ouisse (FEMTO-ST – ENSMM, France) & J. F. Deü (CNAM, FR) (Eds.), MEDYNA 2013 Proceedings (Creative Commons Attribution-NoDerivs 3.0 Generic (CC BY-ND 3.0) License, pp. 377-380). Peer reviewed |
 | Wu, L., Golinval, J.-C., & Noels, L. (2013). Stiction Failure in Microswitches Due to Elasto-Plastic Adhesive Contacts. In G. Shaw, B. Prorok, ... L. Starman (Eds.), MEMS and Nanotechnology, Volume 6 (pp. 67-74). Springer. doi:10.1007/978-1-4614-4436-7_11 |
 | Kerschen, G., Peeters, M., Golinval, J.-C., & Stephan, C. (2013). Nonlinear modal analysis of a full-scale aircraft. Journal of Aircraft, 50, 1409-1419. doi:10.2514/1.C031918 Peer Reviewed verified by ORBi |
 | Wu, L., Golinval, J.-C., & Noels, L. (January 2013). A Micro Model for Elasto-Plastic Adhesive-Contact in Micro-Switches: Application to cyclic loading. Tribology International, 57, 137-146. doi:10.1016/j.triboint.2012.08.003 Peer Reviewed verified by ORBi |
 | Wu, L., Golinval, J.-C., & Noels, L. (24 November 2012). Stiction failure in microswitches due to elasto-plastic adhesive contact and cyclic loading [Paper presentation]. Nanomechanics and nanotribology for reliability design of micro- and nanosystems - international exploratory workshop, Cluj Napoca, Romania. |
 | Bertha, M., & Golinval, J.-C. (November 2012). Identification modale de systèmes variant dans le temps à partir de réponses simulées sur un exemple d'éoliennes [Poster presentation]. 3ième Colloque "Analyse Vibratoire Expérimentale", Blois, France. |
 | Marin, F., Simon, D., & Golinval, J.-C. (2012). Qualification d’un appareil d'éclairage décoratif soumis aux vibrations induites par un pont ferroviaire. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL. Peer reviewed |
 | Nyssen, F., Golinval, J.-C., Simon, D., & Viguié, R. (2012). Méthodologie d’excitation de modes à diamètres nodaux d’un anneau statorique de turboréacteur. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL. Peer reviewed |
 | Demy, P., Golinval, J.-C., & Simon, D. (2012). Détection d'endommagement et résonances locales sur composite CFRP par vibrothermographie. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL. Peer reviewed |
Kerschen, G., Noël, J.-P., Renson, L., & Golinval, J.-C. (October 2012). Nonlinear Dynamic Analysis of Aerospace Structures [Paper presentation]. LMS European Aerospace Conference 2012, Toulouse, France. |
 | Bertha, M., Mayorga Rios, J. P., & Golinval, J.-C. (2012). Modal identification of time-varying systems using simulated responses on wind turbines. In P. Sas, D. Moens, ... S. Jonckheere (Eds.), Proceedings of ISMA2012-USD2012 (pp. 4285-4296). Leuven, Belgium: KU Leuven. |
 | Demy, P., Golinval, J.-C., & Simon, D. (September 2012). Damage detection and local resonances model in CFRP composite material by vibrothermography [Paper presentation]. ISMA2012 - International Conference on Noise and Vibration Engineering, Leuven, Belgium. |
 | Elkarous, L., Pirlot, M., & Golinval, J.-C. (2012). Étalonnage dynamique des capteurs piézoélectriques pour la mesure de haute pression balistique. In 4ème Conférence Internationale de métrologie - CAFMET2012. |
 | Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2012). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. Shock and Vibration, 19 (5), 795-801. doi:10.3233/SAV-2012-0688 Peer Reviewed verified by ORBi |
 | Pustan, M., Muller, R., & Golinval, J.-C. (2012). Nanomechanical and nanotribological characterization of microelectromechanical system. Journal of Optoelectronics and Advanced Materials, 14 (3-4), 401-412. Peer reviewed |
 | Nguyen, V. H., Rutten, C., Golinval, J.-C., Mahowald, J., Maas, S., & Waldmann, D. (2012). Damage Detection on the Champangshiehl Bridge using Blind Source Separation. In A. Strauss, D. M. Frangopol, ... K. Bergmeister (Eds.), Life-Cycle and Sustainability of Civil Infrastructure Systems. London, United Kingdom: Taylor & Francis Group. Peer reviewed |
 | Pustan, M., Rochus, V., & Golinval, J.-C. (2012). Mechanical and tribological characterization of a thermally actuated MEMS cantilever. Microsystem Technologies. doi:10.1007/s00542-011-1423-7 Peer Reviewed verified by ORBi |
 | Wu, L., Golinval, J.-C., & Noels, L. (2012). Stiction failure in microswitches due to elasto-plastic adhesive contact. In Proceedings of the XII SEM International Conference & Exposition on Experimental and Applied Mechanics (pp. 9). |
 | Demy, P., Golinval, J.-C., & Simon, D. (2011). Détection d'endommagement de structures en matériaux composites CFRP par vibrothermographie. In J.-M. Desse, P. Picart, ... P. Tankam (Eds.), Actes du 12ème colloque international francophone sur les méthodes et techniques optiques pour l'industrie. France: Les éditions de la Société Française d'Optique. Peer reviewed |
 | Wu, L., Golinval, J.-C., & Noels, L. (2011). Influence of the elasto-plastic adhesive contact on Micro-Switches. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, C. Geuzaine, L. Noels, J.-F. Remacle, ... E. Béchet (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 8). |
 | Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (01 August 2011). A Micro-Macroapproach to Predict Stiction due to Surface Contact in Microelectromechanical Systems. Journal of Microelectromechanical Systems, 20 (4), 976 - 990. doi:10.1109/JMEMS.2011.2153823 Peer Reviewed verified by ORBi |
 | Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (25 April 2011). Modeling and finite element analysis of mechanical behavior of flexible MEMS components. Microsystem Technologies, 17 (4), 553-562. doi:10.1007/s00542-011-1232-z Peer Reviewed verified by ORBi |
 | Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (2011). Effects of the electrode positions on the dynamical behaviour of electrostatically actuated MEMS resonators [Paper presentation]. 12th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems - EuroSimE, Linz, Austria. doi:10.1109/ESIME.2011.5765767 Peer reviewed |
 | Elkarous, L., Pirlot, M., Golinval, J.-C., & Maldague, M. (2011). Investigation on gas pressure measurement inside small caliber weapons with piezoelectric transducers. In Measurement Science Conference 2012. |
 | Golinval, J.-C. (06 January 2011). Diagnostic de l’état mécanique de structures par analyse de vibrations [Paper presentation]. Les Jeudis des Sciences, Luxembourg, Luxembourg. |
 | Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Modal testing of nonlinear vibrating structures based on nonlinear normal modes: Experimental demonstration. Mechanical Systems and Signal Processing, 25, 1227-1247. doi:10.1016/j.ymssp.2010.11.006 Peer Reviewed verified by ORBi |
 | Nguyen, V. H., & Golinval, J.-C. (2011). Damage Detection Using Blind Source Separation Techniques. In IMAC-XXIX: Conference & Exposition on Structural Dynamics - Advanced Aerospace Applications. Springer. |
 | Pustan, M., Belcin, O., & Golinval, J.-C. (2011). Dynamic investigations of paddle MEMS cantilevers used in mass sensing applications. In M. Arghir (Ed.), Acta Technica Napocensis of The Technical University of Cluj-Napoca (pp. 117-122). |
 | Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2011). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In T. Proulx (Ed.), MEMS and Nanotechnology, Volume 2 (pp. 189-195). New York, United States - New York: Springer. doi:10.1007/978-1-4419-8825-6_27 |
 | Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Dynamic testing of nonlinear vibrating structures using nonlinear normal modes. Journal of Sound and Vibration, 330. doi:10.1016/j.jsv.2010.08.028 Peer Reviewed verified by ORBi |
 | Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Industrial applications of extended output-only Blind Source Separation techniques. Vibration Problems Icovp 2011: The 10th International Conference on Vibration Problems. |
 | Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2011). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. In N. M. Maia NNM (Ed.), International Conference on Structural Engineering Dynamics (ICEDyn 2011) - Proceedings. |
 | Peeters, M., Kerschen, G., Golinval, J.-C., Stephan, C., & Lubrina, P. (2011). Nonlinear modal analysis of aerospace structures. In Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. |
 | Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Comparison of output-only methods for condition monitoring of industrials systems. Journal of Physics. Conference Series, 305. doi:10.1088/1742-6596/305/1/012101 Peer Reviewed verified by ORBi |
Peeters, M., Kerschen, G., Golinval, J.-C., Stéphan, C., & Lubrina, P. (2011). Nonlinear Normal Modes of a Full-Scale Aircraft. In 29th International Modal Analysis Conference, Jacksonville, 2011. |
 | Peeters, M., Kerschen, G., Golinval, J.-C., & Stephan, C. (2011). Nonlinear normal modes of real-world structures: application to a full-scale aircraft. In Proceedings of the ASME International Design Engineering Technical Conferences. doi:10.1115/DETC2011-47141 Peer reviewed |
 | Peeters, M., Renson, L., Kerschen, G., Golinval, J.-C., Stéphan, C., & Lubrina, P. (2011). Computation of nonlinear normal modes of large structures: application to a full-scale aircraft. In Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011). |
Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Phase resonance testing of nonlinear vibrating structures. In 28th International Modal Analysis Conference, Jacksonville, 2010. |
 | Pustan, M., Rochus, V., & Golinval, J.-C. (December 2010). NANOTRIBOLOGICAL AND NANOMECHANICAL CHARACTERIZATIONS OF MEMS MATERIALS [Poster presentation]. NanoWal - The Wallonia Network for Nanotechnologies ASBL, Louvain-la-Neuve, Belgium. |
 | Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2010). Fault detection in mechanical systems based on subspace features. International Conference on Noise and Vibration Engineering. |
 | Nguyen, V. H., & Golinval, J.-C. (September 2010). Fault detection based on Kernel Principal Component Analysis. Engineering Structures, 32, 3683-3691. doi:10.1016/j.engstruct.2010.08.012 Peer Reviewed verified by ORBi |
 | Nguyen, V. H., & Golinval, J.-C. (August 2010). Localization and quantification of damage in beam-like structures using sensitivities of principal component analysis results. Mechanical Systems and Signal Processing, 24 (6), 1831-1843. doi:10.1016/j.ymssp.2010.01.012 Peer Reviewed verified by ORBi |
 | Nguyen, V. H., Peeters, M., & Golinval, J.-C. (July 2010). Detection of nonlinearity in a dynamic system using deformation modes obtained from the wavelet transform of measured responses. Shock and Vibration, 17 (4-5), 491-506. doi:10.3233/SAV-2010-0543 Peer Reviewed verified by ORBi |
 | Pustan, M., Golinval, J.-C., & Rochus, V. (2010). Geometrical Effects on the Dynamical Behavior of MEMS structures [Paper presentation]. European Conference on Computational Mechanics (ECCM 2010), Paris, France. Peer reviewed |
 | Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (2010). Modeling and Finite Element Analysis of Mechanical Behavior of Flexible MEMS Components. In B. Courtois (Ed.), DTIP 2010 (2010, pp. 171-176). Grenoble, France: EDA Publishing. |
 | Pustan, M., Golinval, J.-C., & Rochus, V. (2010). Effects of the geometrical dimensions on stress and strain of electrostatically actuated MEMS resonators at pull-in and stiction positions. In EuroSimE 2010. doi:10.1109/ESIME.2010.5464576 |
 | Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2010). Prediction of Stiction in Microswitch Systems. In EUROSIME 2010 (pp. 4). doi:10.1109/ESIME.2010.5464599 |
 | Nguyen, V. H., & Golinval, J.-C. (2010). Damage Diagnosis of Beam-like Structures Based on Sensitivities of Principal Component Analysis Results. In IMAC-XXVIII A Conference on Structural Dynamics. Stoughton, United States - Wisconsin: The Printing House, Inc. |
 | Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2010). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In SEM 2010 Annual Conference & Exposition on Experimental and Applied Mechanics (Society for Experimental Mechanics, Inc, pp. 7). |
 | Pustan, M., Rochus, V., Wu, L., Noels, L., & Golinval, J.-C. (2010). Evaluation of Tribo-Mechanical Properties of Thin Films Using Atomic Force Microscope. In First European Conference on Nanofilm ECNF2010 (pp. 7). |
 | Peeters, M., Kerschen, G., & Golinval, J.-C. (2010). Modal testing using nonlinear normal modes: experimental demonstration. In Proceedings of the International Conference on Noise and Vibration Engineering. |
Peeters, M., Golinval, J.-C., & Kerschen, G. (2010). Nonlinear Normal Modes: Theoretical Curiosity or Practical Concept ?, KEYNOTE LECTURE. In IMPACT 2010, Djerba, 2010. |
Peeters, M., Kerschen, G., & Golinval, J.-C. (2010). Experimental modal analysis of nonlinear vibrating structures using nonlinear normal modes. In IV European Conference on Computational Mechanics, Paris, 2010. |
 | Peeters, M., Golinval, J.-C., & Kerschen, G. (2010). Theoretical and experimental modal analysis of nonlinear aerospace structures. In Proceedings of the AIAA Modeling and Simulation Technologies Conference. |
 | Rochus, V., Hannot, S., Golinval, J.-C., & Rixen. (2010). Simulation of Particle Levitation due to Dielectrophoresis. In EuroSimE 2010. doi:10.1109/ESIME.2010.5464526 |
 | Nguyen, V. H., & Golinval, J.-C. (2010). Damage localization in Linear-Form Structures Based on Sensitivity Investigation for Principal Component Analysis. Journal of Sound and Vibration, 329, 4550-4566. doi:10.1016/j.jsv.2010.04.032 Peer Reviewed verified by ORBi |
Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2010). Subspace-based Methods for Machinery Analysis and Monitoring [Paper presentation]. XVIIth Symposium Vibrations, Chocs & Bruits, Lyon, France. |
 | Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (01 December 2009). Influence of Adhesive Rough Surface Contact on Micro-Switches. Journal of Applied Physics, 106 (11), 113502. doi:10.1063/1.3260248 Peer Reviewed verified by ORBi |
 | Marin, F., Marville, C., & Golinval, J.-C. (2009). Qualification Procedure of Luminaires in the Event of an Impact to the Pole [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium. |
 | Rutten, C., Loffet, C., & Golinval, J.-C. (2009). Damage Detection of Mechanical Components Using Null Subspace Analysis [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium. |
Poncelet, F., Bernay, B., Kerschen, G., & Golinval, J.-C. (2009). Damping material characterization and modeling: an industrial case-study. In International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, 2009. doi:10.1115/DETC2009-87342 Peer reviewed |
 | Peeters, M., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2009). Nonlinear normal modes, Part 2: Toward a pratical computation using numerical continuation techniques. Mechanical Systems and Signal Processing, 23, 195-216. doi:10.1016/j.ymssp.2008.04.003 Peer Reviewed verified by ORBi |
Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2009). Influence of Adhesive Rough Surface Contact on Micro-Switches [Paper presentation]. MUT 09, Besançon, France. |
 | Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzene, M. (2009). Modal Analysis of a Nonlinear Periodic Structure with Cyclic Symmetry. AIAA Journal, 47, 1014-1025. doi:10.2514/1.40461 Peer Reviewed verified by ORBi |
Kerschen, G., & Golinval, J.-C. (2009). Dimensionality Reducion using Linear and Nonlinear Transformations. In C. Boller, Encyclopedia of Structural Health Monitoring. Chichester, United Kingdom: Wiley. |
Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). Modal testing of nonlinear vibrating structures based on a nonlinear extension of force appropriation. In ASME International Design Engineering Technical Conferences, San Diego, 2009. doi:10.1115/DETC2009-87321 Peer reviewed |
 | Viguié, R., Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). Energy Transfer and Dissipation in a Duffing Oscillator Coupled to a Nonlinear Attachment. Journal of Computational and Nonlinear Dynamics, 4 (4). doi:10.1115/1.3192130 Peer reviewed |
 | Viguié, R., Kerschen, G., Golinval, J.-C., McFarland, D. M., Bergman, L. A., Vakakis, A. F., & van de Wouw, N. (2009). Using passive nonlinear targeted energy transfer to stabilize drill-stringsystems. Mechanical Systems and Signal Processing, 23, 149-169. doi:10.1016/j.ymssp.2007.07.001 Peer Reviewed verified by ORBi |
 | Saint-Mard, M., Heusdens, B., Haudry, F., Rochus, V., Gutschmidt, S., Destiné, J., & Golinval, J.-C. (2009). Smart Sensors and MEMS for all over Industrial Application Niches. In Smart Systems Integration. |
 | Nguyen, V. H., Peeters, M., & Golinval, J.-C. (2009). Detection of nonlinearity in a dynamic system using deformation modes obtained from the Wavelet Transfrom of measured responses [Paper presentation]. Internaional Conference on Structural Engineering Dynamics (ICEDyn 2009), Ericeira, Portugal. |
 | Rochus, V., Golinval, J.-C., Van Miegroet, L., & Duysinx, P. (2009). Electrostatic Forces Computed with Extended Finite Element [Paper presentation]. International Conference on Extended Finite Element Methods – Recent Developments and Applications XFEM 2009, Aachen, Germany. |
 | Pustan, M., Golinval, J.-C., & Rochus, V. (2009). Nanomechanical properties of sensing microcomponents [Paper presentation]. MicroNano Conference´09, Delft, Netherlands. |
 | Rochus, V., Golinval, J.-C., & Geuzaine, C. (2009). Dual Approach for Electromechanical Coupling in MEMS [Paper presentation]. ASME Design Engineering Technical Conference & Computers and Information in Engineering Conference, San Diego, United States - California. doi:10.1115/DETC2009-87791 Peer reviewed |
 | Gutschmidt, S., Rochus, V., & Golinval, J.-C. (2009). Static and Dynamic experimental investigations of a micro-electromechanical cantilever in air and vacuum [Paper presentation]. Proceedings of Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-systems EuroSime, Delft, Netherlands. doi:10.1109/ESIME.2009.4938475 |
Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). On modal interactions in strongly nonlinear systems. In Euromech 503, Nonlinear Normal Modes, Dimension Reduction and Localization in Vibrating Systems, Frascati, 2009. |
Viguié, R., Kerschen, G., Golinval, J.-C., Bergman, L. A., & Vakakis, A. F. (2009). Using passive nonlinear targeted energy transfer to stabilize drill-stringsystems. In International Colloquium on Non-Linear Dynamics of Deep Drill-String Systems, Liège, 2009. |
Peeters, M., Viguié, R., Kerschen, G., & Golinval, J.-C. (2009). Modal analysis of a nonlinear structure with cyclic symmetry. In 27th International Modal Analysis Conference, Orlando, 2009. |
 | Golinval, J.-C. (2009). Parameter estimation and structural model updating using modal methods in the presence of nonlinearity [Paper presentation]. SICON Final Conference, Rome, Italy. |
 | Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2009). Nonlinear normal modes, Part 1: Useful framework for the structural dynamicist. Mechanical Systems and Signal Processing, 23, 170-194. doi:10.1016/j.ymssp.2008.04.002 Peer Reviewed verified by ORBi |
 | Rochus, V., Gutschmidt, S., Golinval, J.-C., Saint-Mard, M., Heusdens, B., Haudry, F., & Destiné, J. (2009). High Vibration Sensors: Modelling, Design and Integration. In Proceedings of Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-systems EuroSime. doi:10.1109/ESIME.2009.4938479 |
 | Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzenne, M. (2008). Nonlinear modal analysis and energy localization in a bladed disk assembly. In ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, 2008. doi:10.1115/GT2008-51388 Peer reviewed |
 | Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Electromechanical microdevice pull-in voltage maximization using topology optimization [Paper presentation]. 8th World Congress on Computational Mechanics, Venice, Italy. |
 | Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). Operational Modal Analysis using Second-Order Blind Identification. In 26th International Modal Analysis Conference, Orlando, 2008. |
 | Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). In-orbit vibration testing of spacecraft structures. In International Conference on Noise and Vibration Engineering, Leuven, 2008. |
 | Rochus, V., Rixen, D., & Golinval, J.-C. (2008). MEMS Modelling using Non-Conforming Elements [Paper presentation]. Eccomas, Venezia, Italy. |
Rochus, V., Van Miegroet, L., Duysinx, P., Golinval, J.-C., & Rixen, D. (2008). Modelling the electromechanical coupling of RF switch using Extended Finite Element [Paper presentation]. EuroSimE Conference :Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, Freiburg im Breisgau, Germany. doi:10.1109/ESIME.2008.4525039 |
 | Peeters, M., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2008). Nonlinear Normal Modes, Part II: Practical Computation using Numerical Continuation Techniques. In 26th International Modal Analysis Conference, Orlando, 2008. |
 | Peeters, M., Viguié, R., Serandour, G., Kerschen, G., & Golinval, J.-C. (2008). Computation of Nonlinear Normal Modes using Numerical Continuation Techniques. In International Confernce on Advanced Computational Methods in Engineering, Liège, 2008. |
 | Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Microbeam pull-in voltage topology optimization including material deposition constraint. Computer Methods in Applied Mechanics and Engineering, 197, 4040-4050. doi:10.1016/j.cma.2008.03.024 Peer Reviewed verified by ORBi |
 | Durieu, F., Bruls, O., Rochus, V., Golinval, J.-C., & Serandour, G. (2008). Reduced-order modeling of electrostatically-actuated micro-beams. In Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC) (pp. 1-6). |
 | Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2008). Nonlinear Normal Modes, Part I: An Attempt To Demystify Them. In 26th International Modal Analysis Conference, Orlando, 2008. |
 | Viguié, R., Peeters, M., Kerschen, G., & Golinval, J.-C. (2008). Vibration Mitigation of Nonlinear Vibrating Structures using Nonlinear Energy Sinks. In 26th International Modal Analysis Conference, Orlando, 2008. |
 | Bruls, O., & Golinval, J.-C. (2008). On the numerical damping of time integrators for coupled mechatronic systems. Computer Methods in Applied Mechanics and Engineering, 197 (6-8), 577-588. doi:10.1016/j.cma.2007.08.007 Peer Reviewed verified by ORBi |
 | Peeters, M., Viguié, R., Serandour, G., Kerschen, G., & Golinval, J.-C. (2008). COMPUTATION OF NONLINEAR NORMAL MODES, PART I: NUMERICAL CONTINUATION IN MATLAB. In Sixth EUROMECH Nonlinear Dynamics Conference, Saint Petersbourg, 2008. Peer reviewed |
 | Serandour, G., Peeters, M., Kerschen, G., & Golinval, J.-C. (2008). Computation of nonlinear normal modes, part II: numerical continuation in Auto. In Sixth EUROMECH Nonlinear Dynamics Conference, Saint Petersbourg, 2008. Peer reviewed |
 | Rochus, V., Golinval, J.-C., Mendez, C., Klapka, I., & Louis, C. (December 2007). Model of electrostatic actuated deformable mirror using strongly coupled electro-mechanical finite element. Analog Integrated Circuits and Signal Processing, 53 (2-3), 129-135. doi:10.1007/s10470-007-9066-4 Peer Reviewed verified by ORBi |
 | Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzenne, M. (2007). LOCALIZATION OF ENERGY IN A PERFECTLY SYMMETRIC BLADED DISK ASSEMBLY DUE TO NONLINEARITIES. In ASME Internaional Mechanical Engineering Congress and Exposition, Seattle, 2007. doi:10.1115/IMECE200741649 Peer reviewed |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (July 2007). Non-conforming element for accurate modelling of MEMS. Finite Elements in Analysis and Design, 43 (10), 749-756. doi:10.1016/j.finel.2007.03.006 Peer Reviewed verified by ORBi |
 | Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (May 2007). Topology optimization of microbeams including layer deposition manufacturing constraints [Paper presentation]. 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea. |
 | Kerschen, G., Poncelet, F., Golinval, J.-C., Vakakis, A. F., & Bergman, L. A. (2007). Identification of Linear and Nonlinear Systems using Signal Processing Techniques. In 26th Benelux Meeting on Systems and Control, Lommel, 2007. |
 | Bolland, M., COLLIGNON, G., VANDENPLAS, X., Vueghs, P., Vandenrijt, J.-F., Kerschen, G., Bruls, O., Noels, L., Golinval, J.-C., Beckers, P., Rochus, P., & GRANVILLE, D. (2007). PARTICIPATION OF ULG STUDENTS TO THE SSETI MICROSATELLITE PROGRAMME USING SAMCEF [Paper presentation]. 10th SAMTECH Users Conference, Liège, Belgium. |
 | Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: Current Status and Future Directions. In 25th International Modal Analysis Conference, Orlando, 2007. |
 | Poncelet, F., Kerschen, G., Golinval, J.-C., & Verlest, D. (2007). BLIND SOURCE SEPARATION TECHNIQUES FOR MODAL ANALYSIS: EXPERIMENTAL DEMONSTRATION. In International Conference on Engineering Dynamics, Carvoeiro, 2007. |
 | Peeters, M., Viguié, R., Kerschen, G., & Golinval, J.-C. (2007). Practical Computation of Nonlinear Normal Modes Using Numerical Continuation Techniques. In International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, 2007. |
 | Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2007). Blind source separation techniques - Another way of doing operational modal analysis. In International Operational Modal Analysis Conference, Copenhague, 2007. |
 | Viguié, R., Kerschen, G., Golinval, J.-C., Bergman, L. A., Vakakis, A. F., & van de Wouw, N. (2007). Using Targeted Energy Transfer to Stabilize Drill-string Systems. In 25th International Modal Analysis Conference, Orlando, 2007. |
 | Kerschen, G., Poncelet, F., & Golinval, J.-C. (2007). Physical interpretation of independent component analysis in structural dynamics. Mechanical Systems and Signal Processing, 21, 1561–1575. doi:10.1016/j.ymssp.2006.07.009 Peer Reviewed verified by ORBi |
 | Rochus, V., & Golinval, J.-C. (2007). Electro-mechanical Coupling in MEMS: Modeling and Experimental Validation [Paper presentation]. International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, China. |
 | Poncelet, F., Kerschen, G., Golinval, J.-C., & Verhelst, D. (2007). Output-only modal analysis using blind source separation techniques. Mechanical Systems and Signal Processing, 21 (6), 2335-2358. doi:10.1016/j.ymssp.2006.12.005 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2007). The global modal parameterization for non-linear model-order reduction in flexible multibody dynamics. International Journal for Numerical Methods in Engineering, 69 (5), 948-977. doi:10.1002/nme.1795 Peer Reviewed verified by ORBi |
 | Worden, K., Kerschen, G., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: A Short (and Biased) History. In 25th International Modal Analysis Conference, Orlando, 2007. |
 | Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2007). System Identification in Structural Dynamics Using Blind Source Separation Techniques. In 7th International Conference on ICA and Signal, Londres, 2007. Peer reviewed |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (November 2006). Simulation and optimization of controlled multibody systems: Application to vehicle dynamics [Paper presentation]. ITCT 2006, Paris, France. |
Bruls, O., Kerschen, G., Collignon, G., Cornez, S., Vandenplas, X., Bolland, M., Golinval, J.-C., Vandenrijt, J.-F., Granville, D., & Rochus, P. (November 2006). Participation of the undergraduate students to the solar panels design of the educational spacecraft ESEO [Paper presentation]. ITCT 2006, Paris, France. |
 | Bruls, O., & Golinval, J.-C. (October 2006). The generalized-alpha method in mechatronic applications. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 86 (10 Sp. Iss. SI), 748-758. doi:10.1002/zamm.200610283 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). An extended flexible multibody dynamics software for mechatronic applications. In Proceedings of ISMA 2006 (pp. 10). |
Lepage, S., & Golinval, J.-C. (17 July 2006). Stochastic Finite Element Analysis of Thermoelastic Effects in Micro-Resonators [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States - California. |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (June 2006). Coupled electro-mechanics simulation methodology of the dynamic pull-in in micro-systems. Sensor Letters, 4 (2), 206-213. doi:10.1166/sl.2006.017 Peer Reviewed verified by ORBi |
 | Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (April 2006). Past, present and future of nonlinear system identification in structural dynamics. Mechanical Systems and Signal Processing, 20 (3), 505-592. doi:10.1016/j.ymssp.2005.04.008 Peer Reviewed verified by ORBi |
 | Yan, A.-M., & Golinval, J.-C. (April 2006). Null subspace-based damage detection of structures using vibration measurements. Mechanical Systems and Signal Processing, 20 (3), 611-626. doi:10.1016/j.ymssp.2005.04.010 Peer Reviewed verified by ORBi |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2006). On the Advantages of Using a Strong Coupling Variational Formulation to Model Electro-Mechanical Problem. In Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro/Nanoelectronics and Systems, Proceedings of EuroSimE 2006. doi:10.1109/ESIME.2006.1643965 Peer reviewed |
 | Lepage, S., & Golinval, J.-C. (2006). Modeling and Uncertainty Quantification of Thermoelastic Damping in Micro-Resonators [Paper presentation]. International Modal Analysis Conference (IMAC XXIV), St Louis, United States - Missouri. |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (22 January 2006). Monolithic modelling of electro-mechanical coupling in micro-structures. International Journal for Numerical Methods in Engineering, 65 (4), 461-493. doi:10.1002/nme.1450 Peer Reviewed verified by ORBi |
 | Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (2006). MAXIMIZATION OF PULL-IN VOLTAGE OF MICRO-ELECTROMECHANICAL STRUCTURES USING TOPOLOGY OPTIMIZATION [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States. |
 | Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Topology optimization of electromechanical microsystems against pull-in voltage [Paper presentation]. Eurosime 2006, Como, Italy. doi:10.1109/ESIME.2006.1644038 |
 | Bolland, M., Collignon, G., Vandenplas, X., Kerschen, G., Vandenrijt, J.-F., Golinval, J.-C., Granville, D., & Rochus, P. (2006). PARTICIPATION OF UNDERGRADUATE STUDENTS TO THE SOLAR PANELS DESIGN OF THE EDUCATIONAL SPACECRAFT ESEO [Paper presentation]. Conf. de l'Association Aéronautique et Astronautique de France(AAAF), Paris, France. |
 | Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Improvement of Pull-in Voltage of Electromechanical Microbeams Using Topology Optimization. In 3rd European Conference on Computational Mechanics (ECCM). |
 | Poncelet, F., Kerschen, G., & Golinval, J.-C. (2006). Experimental modal analysis using blind source separation techniques. In International Conference on Noise and Vibration Engineering, Leuven, 2006. |
 | Peeters, M., Georgiades, F., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2006). Development of Numerical Algorithms for Practical Computation of Nonlinear Normal Modes. In International Conference on Noise and vibration Engineering, Leuven, 2006. |
 | Yan, A.-M., De Boe, P., & Golinval, J.-C. (2006). Détection et localisation d’endommagements structuraux par la méthode des sous-espaces, le modèle de Kalman et la méthode d’analyse en composantes principales. Mécanique and Industries, 7, 365-372. doi:10.1051/meca:2006050 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). A model reduction method for the control of rigid mechanisms. Multibody System Dynamics, 15 (3), 213-227. doi:10.1007/s11044-006-1354-8 Peer reviewed |
 | Rochus, V., Louis, C., Golinval, J.-C., Mendez, C., & Klapka, I. (2006). Model of Electrostatic Actuated Deformable Mirror using Strongly Coupled Electro-Mechanical Finite Element. In Proceeding of Design, Test, Integration and Packaging (pp. 6). TIMA Editions. Peer reviewed |
 | Lepage, S., Le Traon, O., KLapka, I., Masson, S., & Golinval, J.-C. (2006). THERMOELASTIC DAMPING IN VIBRATING BEAM ACCELEROMETER: A NEW THERMOELASTIC FINITE ELEMENT APPROACH [Paper presentation]. CANEUS 2006, Toulouse, France. |
 | Rochus, V., Rixen, D., & Golinval, J.-C. (2006). Correlation of Experimental and Numerical Results on Electrostatically Actuated Micro-Beams. Technical Proceedings of the 2006 NSTI Nanotechnology Conference and Trade Show, 3. |
 | Bruls, O., & Golinval, J.-C. (October 2005). The generalized-alpha method in mechatronics : Application to a semi-active car suspension [Paper presentation]. ECMI Workshop – Numerical Methods in Multibody Dynamics, Bad Herrenalb, Germany. |
 | Yan, A. M., & Golinval, J.-C. (October 2005). Structural damage localization by combining flexibility and stiffness methods. Engineering Structures, 27 (12), 1752-1761. doi:10.1016/j.engstruct.2005.04.017 Peer Reviewed verified by ORBi |
 | Rochus, V., Kerschen, G., & Golinval, J.-C. (2005). Dynamic analysis of the nonlinear behavior of MEMS using the finite element formulation. In ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, 2005. Peer reviewed |
 | Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2005). Second-order blind identification for operational modal analysis [Paper presentation]. ASME International Design Engineering Technical Conferences, Las Vegas, Nevada, United States. |
 | Kerschen, G., Golinval, J.-C., Vakakis, A. F., & Bergman, L. A. (August 2005). The method of proper orthogonal decomposition for dynamical characterization and order reduction of mechanical systems: An overview. Nonlinear Dynamics, 41 (1-3), 147-169. doi:10.1007/s11071-005-2803-2 Peer reviewed |
 | Yan, A. M., Kerschen, G., De Boe, P., & Golinval, J.-C. (July 2005). Structural damage diagnosis under varying environmental conditions - Part II: local PCA for non-linear cases. Mechanical Systems and Signal Processing, 19 (4), 865-880. doi:10.1016/j.ymssp.2004.12.003 Peer Reviewed verified by ORBi |
 | Poncelet, F., Marin, F., Fleury, C., & Golinval, J.-C. (2005). Optimal design of fixtures for vibration testing of structures on electro-dynamic shaker [Paper presentation]. Twelfth International Congress on sound and Vibration, Lisbon, Portugal. |
 | Yan, A.-M., Kerschen, G., De Boe, P., & Golinval, J.-C. (July 2005). Structural damage diagnosis under varying environmental conditions - Part I: A linear analysis. Mechanical Systems and Signal Processing, 19 (4), 847-864. doi:10.1016/j.ymssp.2004.12.002 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2005). A unified finite element framework for the dynamic analysis of controlled flexible mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Dynamics (pp. 16). |
 | Kerschen, G., Yan, A. M., & Golinval, J.-C. (07 February 2005). Distortion function and clustering for local linear models. Journal of Sound and Vibration, 280 (1-2), 443-448. doi:10.1016/j.jsv.2004.02.043 Peer Reviewed verified by ORBi |
 | Kerschen, G., De Boe, P., Golinval, J.-C., & Worden, K. (February 2005). Sensor validation using principal component analysis. Smart Materials and Structures, 14 (1), 36-42. doi:10.1088/0964-1726/14/1/004 Peer reviewed |
 | Lepage, S., & Golinval, J.-C. (2005). Modélisation par éléments finis du couplage thermo-élastique dans les structures vibrantes [Paper presentation]. 7ème Colloque National en Calcul des Structures, Giens, France. |
 | Kerschen, G., & Golinval, J.-C. (January 2005). Generation of accurate finite element models of nonlinear systems - Application to an aeroplane-like structure. Nonlinear Dynamics, 39 (1-2), 129-142. doi:10.1007/s11071-005-1919-8 Peer reviewed |
Rochus, V., Rixen, D., & Golinval, J.-C. (2005). Simulation of Strong Coupling and Dynamic Pull-in [Paper presentation]. 1st Delft Center for Mechatronics and Microsystems (DCMM) Research Meeting, Delft, Netherlands. |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2005). Electrostatic coupling of MEMS structures: transient simulations and dynamic pull-in. Nonlinear Analysis: Theory, Methods and Applications, 63, 1619 – e1633. doi:10.1016/j.na.2005.01.055 Peer Reviewed verified by ORBi |
 | Rochus, V., Rixen, D., & Golinval, J.-C. (2005). Finite Element Modeling of Electro-Mechanical Coupling in Capacitive Micro-Systems [Paper presentation]. 8th Internationale Conference on Modeling and Simulation of Microsystems, Anaheim, California, United States. |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2005). Coupled Electro-Mechanics Simulation Methodology of the Dynamic Pull-in in Micro-Systems [Paper presentation]. EuroSime 2005 Conference:Termal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Microsystems, Berlin, Germany. doi:10.1109/ESIME.2005.1502828 |
 | Lepage, S., & Golinval, J.-C. (2005). Finite element modeling of the thermoelastic damping in micro-electromechanical systems [Paper presentation]. Third international conference on Advanced Computational Methods in Engineering (ACOMEN 2005), Ghent, Belgium. |
 | Yan, A.-M., Golinval, J.-C., & Marin, F. (2005). Fault Detection Algorithm based on Null-Space Analysis for On-Line Structural Health Monitoring [Paper presentation]. International Modal Analysis Conference (IMAC XXIII), Orlando, United States - Florida. |
 | Kerschen, G., & Golinval, J.-C. (2004). A 2-step methodology for the generation of accurate FE models of nonlinear systems. In ASME Internaional Mechanical Engineering Congress, Anaheim, 2004. Peer reviewed |
 | Kerschen, G., & Golinval, J.-C. (07 August 2004). A model updating strategy of non-linear vibrating structures. International Journal for Numerical Methods in Engineering, 60 (13), 2147-2164. doi:10.1002/nme.1040 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). Generation of closed-form models for the control of flexible mechanisms: a numerical approach. In Proc. of the 7th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 1-10). |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). A systematic model reduction method for the control of flexible multibody systems. In Proc. of the 21st Int. Congress of Theoretical and Applied Mechanics (ICTAM) (pp. 1-2). |
 | Kerschen, G., & Golinval, J.-C. (22 July 2004). Comments on "interpreting proper orthogonal modes of randomly excited linear vibration systems" [letter to the editor]. Journal of Sound and Vibration, 274 (3-5), 1091-1092. doi:10.1016/j.jsv.2004.01.001 Peer Reviewed verified by ORBi |
 | Yan, A. M., De Boe, P., & Golinval, J.-C. (June 2004). Structural damage diagnosis by Kalman model based on stochastic subspace identification. Structural Health Monitoring, 3 (2), 103-119. doi:10.1177/1475921704042545 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (March 2004). Reliable simulation of mechatronic systems using Newmark algorithms [Paper presentation]. EUROMECH Colloquium on Advances in Simulation Techniques for Applied Dynamics (EUROMECH 452), Halle, Germany. |
 | Kerschen, G., & Golinval, J.-C. (February 2004). Feature extraction using auto-associative neural networks. Smart Materials and Structures, 13 (1), 211-219. doi:10.1088/0964-1726/13/1/025 Peer reviewed |
 | Yan, A.-M., Marin, F., & Golinval, J.-C. (2004). Null-Subspace Analysis for Structural Damage Monitoring in Fatigue Testing of Luminaires [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 2004, Leuven, Belgium. |
 | Yan, A. M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2004). Structural damage diagnosis under changing environmental conditions. In 7th International Conference on Motion and Vibration Control, Saint Louis, 2004. |
 | Kerschen, G., Lenaerts, V., Golinval, J.-C., & Feeny, B. F. (2004). Proper Orthogonal modes for the characterisation of nonlinear dynamic systems. In Euromech Colloquim on Nonlinear Modes of Vibrating Systems, Frejus, 2004. |
 | Rochus, V., rixen, D., & Golinval, J.-C. (2004). Dynamical behaviour of electro-mechanical coupled problem [Paper presentation]. Conference EUROMECH, Halle, Germany. |
 | Lenaerts, V., Kerschen, G., Golinval, J.-C., Ruzzene, M., & Giorcelli, E. (2004). Validation of two nonlinear system identification techniques using an experimental testbed. Shock and Vibration, 11 (3-4), 365-375. doi:10.1155/2004/203405 Peer Reviewed verified by ORBi |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2004). Electrostatic Coupling of MEMs Structures: Transient Simulations and Dynamic Pull-in [Paper presentation]. Workshop on Coupled Processes and Phenomena(WCNA-2004), Orlando, Floride, United States. |
Lejeune, J.-M., Lepage, S., Rochus, V., & Golinval, J.-C. (2004). F.E. modelling of electro-mechanical and thermo-elastic couplings in micro-system [Paper presentation]. PAI, Bruxelles, Belgium. |
 | Brasseur, M., De Boe, P., Golinval, J.-C., Tamaz, P., Caule, P., Embrechts, J.-J., & Nemerlin, J. (2004). Placement of Piezoelectric Laminate Actuator for Active Structural Acoustic Control [Paper presentation]. ISMA 2004, Leuven, Belgium. |
 | Caule, P., Tamaz, P., Brasseur, M., De Boe, P., Golinval, J.-C., Nemerlin, J., & Embrechts, J.-J. (2004). Active noise insulation in frontages of buildings [Paper presentation]. 33rd Inter-Noise Congress, Prague, Czechia. |
 | Lejeune, J.-M., Rochus, V., & Golinval, J.-C. (2004). Finite element computation of electromechanical micro-switches and micro-pump actuators [Paper presentation]. 15th International Invitational Symposium on the Unification of Analytical, Computational, and Experimental Solution Methodologies, Springfield, United States - Massachusetts. |
 | Kerschen, G., De Boe, P., Golinval, J.-C., & Worden, K. (2004). Sensor Validation for On-line Vibration Monitoring. In 2nd European Workshop on Structural Health Monitoring, Munich, 2004. |
 | Golinval, J.-C., De Boe, P., Yan, A. M., & Kerschen, G. (2004). Structural damage detection based on PCA of vibration measurements. In 58th Meeting of the Soc. for Mach. Failure Prevention Tech, Virginia Beach, 2004. |
 | Kerschen, G., & Golinval, J.-C. (2003). On the development of a model updating strategy of nonlinear vibrating structures. In ASME International Design Engineering Technical Conferences, Chicago, 2003. doi:10.1115/detc2003/vib-48438 Peer reviewed |
 | Kerschen, G., Golinval, J.-C., & Hemez, F. M. (July 2003). Bayesian model screening for the identification of nonlinear mechanical structures. Journal of Vibration and Acoustics, 125 (3), 389-397. doi:10.1115/1.1569947 Peer Reviewed verified by ORBi |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2003). Consistent Vibration Analysis of Electrostatically Coupled Structures: Application to Microsystems [Paper presentation]. Tenth International Congress on Sound and Vibration, Stockholm, Sweden. |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). A model reduction method for the control of rigid mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Systems. |
 | Lenaerts, V., Kerschen, G., & Golinval, J.-C. (08 May 2003). Identification of a continuous structure with a geometrical non-linearity. Part II: Proper orthogonal decomposition. Journal of Sound and Vibration, 262 (4), 907-919. doi:10.1016/S0022-460X(02)01132-X Peer Reviewed verified by ORBi |
 | Kerschen, G., Lenaerts, V., & Golinval, J.-C. (08 May 2003). Identification of a continuous structure with a geometrical non-linearity. Part I: Conditioned reverse path method. Journal of Sound and Vibration, 262 (4), 889-906. doi:10.1016/S0022-460X(02)01151-3 Peer Reviewed verified by ORBi |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). Computational environment for the design of flexible mechanisms with feedback control. In Proceeding of 6th National Congress on theorical and Applied Mechanics. |
 | Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Wind Excitation and Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium. |
 | Rochus, V., Rixen, D. J., & Golinval, J.-C. (2003). Modeling of Electro-Mechanical Coupling Problem using the Finite Element Formulation [Paper presentation]. SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, United States. |
 | Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural Integrity Monitoring by Vibration Measurements [Paper presentation]. Fracture Mechanics 2003, Shanghai, China. |
 | Kerschen, G., & Golinval, J.-C. (2003). Auto-associantive neural networks, Part I: Replacement of missing sensor values. In 8th Internationale Conference on Recent Advances in Structural Dynamics, Southampton, 2003. Peer reviewed |
 | Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul. (2003). European COST action F3 on structural dynamics. Working group 3: identification of non-linear systems. Introduction and conclusions. Mechanical Systems and Signal Processing. Peer Reviewed verified by ORBi |
 | Lenaerts, V., Kerschen, G., & Golinval, J.-C. (January 2003). ECL benchmark: Application of the proper orthogonal decomposition. Mechanical Systems and Signal Processing, 17 (1), 237-242. doi:10.1006/mssp.2002.1565 Peer Reviewed verified by ORBi |
 | Bruls, O., & Golinval, J.-C. (2003). Simulation of an Active Control System in a Hot-Dip Galvanizing Line, Virtual Nonlinear Multibody Systems. NATO Review, 103, 325-332. |
 | Rochus, V., Duysinx, P., & Golinval, J.-C. (2003). Modeling of the influence of electric forces on mechanical structures [Paper presentation]. Proceedings of the 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium. |
 | Kerschen, G., Feeny, B. F., & Golinval, J.-C. (2003). On the exploitation of chaos to build reduced-order models. Computer Methods in Applied Mechanics and Engineering, 192 (13-14), 1785-1795. doi:10.1016/S0045-7825(03)00206-8 Peer Reviewed verified by ORBi |
 | De Boe, P., & Golinval, J.-C. (2003). Principal component analysis of Piezo-Sensor Array for damage localization. Structural Health Monitoring, 2 (2), 137-144. doi:10.1177/1475921703002002005 Peer Reviewed verified by ORBi |
 | Kerschen, G., & Golinval, J.-C. (2003). Auto-associative neural networks, Part II: Feacture extraction for non-linear model updating. In 8th Internationale Conference on Recent Advances in Structural Dynamics, Southampton, 2003. Peer reviewed |
 | SIMON, D., & Golinval, J.-C. (2003). Use of Whole-Field Displacement Measurements for Model Updating of Blades [Paper presentation]. Proceedings of IMAC XXI, Kissimmee, United States - Florida. |
 | Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Comparison of the Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. ASTELAB 2003, Paris, France. |
 | Golinval, J.-C., & Link, M. (January 2003). Cost Action F3 'Structural Dynamics' (1997-2001) - An European Co-operation in the Field of Science and Technology. Mechanical Systems and Signal Processing, 17 (1), 3-7. doi:10.1006/mssp.2002.1533 Peer Reviewed verified by ORBi |
 | Yan, A.-M., & Golinval, J.-C. (2003). Model Updating Based on Frequency Response Functions Using A General Finite Element Code. European Journal of Mechanical and Environmental Engineering, 48 (3), 149-162. Peer reviewed |
 | Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul, P. (January 2003). Working group 3- Identification of non-linear systems. Mechanical Systems and Signal Processing, 17 (1), 177-178. doi:10.1006/mssp.2002.1549 Peer Reviewed verified by ORBi |
 | Thonon, C., & Golinval, J.-C. (January 2003). Results obtained by minimising natural frequency and mac-value errors of a beam model. Mechanical Systems and Signal Processing, 17 (1), 65-72. doi:10.1006/mssp.2002.1540 Peer Reviewed verified by ORBi |
 | Molina, F. J., Pascual, R., & Golinval, J.-C. (January 2003). Description of the STEELQUAKE benchmark. Mechanical Systems and Signal Processing, 17 (1), 77-82. doi:10.1006/mssp.2002.1542 Peer Reviewed verified by ORBi |
 | Golinval, J.-C., & Link, M. (Eds.). (2003). Identification, Health Monitoring and Damage Detection of Structural Dynamic Systems: Results Obtained Within the European COST Research Network. London, United Kingdom: Academic Press. doi:10.1006/mssp.2002.1532 |
 | De Boe, P., Yan, A.-M., & Golinval, J.-C. (2003). Substructure Damage Detection by Principal Component Analysis : Application to Environmental Vibration Testing [Paper presentation]. Fourth Workshop on Structural Health Monitoring, Stanford, United States - California. |
 | Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural integral monitoring by vibration measurements. FM2003 - Structural Integrity and Materials Aging, 363-370. Peer reviewed |
 | Bodeux, J.-B., & Golinval, J.-C. (January 2003). Modal identification and damage detection using the data-driven stochastic subspace and ARMAV methods. Mechanical Systems and Signal Processing, 17 (1), 83-89. doi:10.1006/mssp.2002.1543 Peer Reviewed verified by ORBi |
Kerschen, G., & Golinval, J.-C. (2003). Validating structural models in non-linear dynamics. In 6ème congrès national de Mécanique Th. et App., Gent, 2003. |
 | Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2003). VTT benchmark: Application of the restoring force surface method. Mechanical Systems and Signal Processing, 17 (1), 189-193. doi:10.1006/mssp.2002.1558 Peer Reviewed verified by ORBi |
 | Kerschen, G., Feeny, B. F., & Golinval, J.-C. (2002). On the exploitation of chaos to build reduced-order models. In International Conference on Noise and Vibration Engineering, Leuven, 2002. |
Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul, P. (2002). "European Cost action F3 on structural dynamics. WG3: identification of non-linear systems.Activities and Results". In International Conference on Noise and Vibration Engineering, Leuven, 2002. |
 | Bruls, O., Duysinx, P., & Golinval, J.-C. (2002). An Adaptation of the Newmark Scheme for the Integrated Simulation of Mechatronic Systems. In Proceeding of 6th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 484-489). |
 | Kerschen, G., & Golinval, J.-C. (25 July 2002). Non-linear generalization of principal component analysis: From a global to a local approach. Journal of Sound and Vibration, 254 (5), 867-876. doi:10.1006/jsvi.2001.4129 Peer Reviewed verified by ORBi |
 | Bruls, O., & Golinval, J.-C. (2002). Simulation of an Active Control System in a Hot-Dip Galvanizing Line. In Preprints of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems (pp. 39-44). |
 | Kerschen, G., & Golinval, J.-C. (2002). Feature extraction for non-linear model updating. In International Conference on Structural Dynamics Modelling, Funchal, 2002. |
 | Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Finite Element Analysis of the Electro-Mechanical Coupling in MEMS [Paper presentation]. Proceedings of ACOMEN 2002, Liège, Belgium. |
 | Bruls, O., De Boe, P., Duysinx, P., & Golinval, J.-C. (2002). Integrated simulation of mechanical structures and their control system. In Proc. of the 2nd Int. Conf. on Advanced Computational Methods in Engineering (ACOMEN) (pp. 1-10). |
 | Bruls, O., & Golinval, J.-C. (March 2002). Active Control of the Steel Strip in a Hot-Dip Galvanizing Line [Paper presentation]. 21st Benelux Meeting on Systems and Control, Veldhoven, Netherlands. |
 | Kerschen, G., & Golinval, J.-C. (2002). Frequency domain approaches for the identification of an experimental beam with a local nonlinearity. In 20th International Modal Analysis Conference, Los Angeles, 2002. |
 | Kerschen, G., & Golinval, J.-C. (31 January 2002). Physical interpretation of the proper orthogonal modes using the singular value decomposition. Journal of Sound and Vibration, 249 (5), 849-865. doi:10.1006/jsvi.2001.3930 Peer Reviewed verified by ORBi |
 | Marin, F., Golinval, J.-C., & Marville, C. (2002). Accelerated Fatigue Testing Methodology of Luminaires on Electro-Dynamic Shaker [Paper presentation]. ACOMEN 2002, Liège, Belgium. |
 | Pascual, R., Razeto, M., Golinval, J.-C., & Schalchli, R. (2002). A Robust FRF-based Technique for Model Updating [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium. |
 | Worden, K., Molina, F., Pascual, R., Golinval, J.-C., Maeck, J., & De Roeck, G. (2002). COST Action F3 on Structural Dynamics: Benchmarks for Structural Health Monitoring [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium. |
 | Simon, D., & Golinval, J.-C. (2002). Finite Element Model Updating of Plate-like Structures Using Modal Holographic Measurement Field [Paper presentation]. International Congress on Quality Assessment of Numerical Simulations in Engineering (QUANSE 2002), Concepción, Chile. |
 | Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Modeling of Electro-mechanical coupling in MEMS [Paper presentation]. PAI, Bruxelles, Belgium. |
 | Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, conditionned reverse path method. In International Conference on Structural Systems Identification, Kassel, 2001. |
 | Bodeux, J.-B., & Golinval, J.-C. (June 2001). Application of ARMAV models to identification and damage detection of mechanical and civil engineering structures. Smart Materials and Structures, 10 (3), 479-489. doi:10.1088/0964-1726/10/3/309 Peer reviewed |
 | Golinval, J.-C., & Argoul, P. (2001). COST F3 Structural Dynamics 1997-2001, Presentation and Some Preliminary Results [Paper presentation]. 3rd International Workshop on Structural Control, Paris, France. |
 | De Boe, P., & Golinval, J.-C. (2001). Damage Localisation Using Principal Component Analysis of Distributed Sensor Array [Paper presentation]. Third Workshop on Structural Health Monitoring, Stanford, United States - California. |
 | Lenaerts, V., Kerschen, G., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, proper othogonal decomposition. In International Conference on Structural Systems Identification, Kassel, 2001. |
 | Bruls, O., De Boe, P., & Golinval, J.-C. (2001). Stabilisation vibratoire de la ligne de galvanisation Eurogal - Etude paramétrique. (Internal Report VIS-RE-48). University of Liège. https://orbi.uliege.be/handle/2268/61622 |
 | Kerschen, G., Golinval, J.-C., & Worden, K. (2001). Theoretical and experimental identification of a non-linear beam. Journal of Sound and Vibration, 244, 597-613. doi:10.1006/jsvi.2000.3490 Peer Reviewed verified by ORBi |
 | Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Identification of wire rope isolators using the restoring force surface method. In International Conference on Structural Systems Identification, Kassel, 2001. |
 | Lenaerts, V., Kerschen, G., & Golinval, J.-C. (2001). Proper orthogonal decomposition for model updating of non-linear mechanical systems. Mechanical Systems and Signal Processing, 15(1), 31-43. doi:10.1006/mssp.2000.1350 Peer Reviewed verified by ORBi |
 | BODEUX, J.-B., & Golinval, J.-C. (2001). Modal Identification of the "Steel-Quake" Structure Using the Data-Driven Stochastic Subspace and ARMAV Methods [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany. |
 | Thonon, C., & Golinval, J.-C. (2001). Finite Element Model Updating of the Garteur SM-AG19 Structure [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany. |
 | BODEUX, J.-B., & Golinval, J.-C. (2000). ARMAV Model Technique for System Identification and Damage Detection [Paper presentation]. European COST F3 Conference on System Identification & Structural Health Monitoring, Madrid, Spain. |
 | Lenearts, V., Kerschen, G., & Golinval, J.-C. (2000). Parameter identification of nolinear mechanical systems using POD. In 18th International Modal Analysis Conference, San Antonio, 2000. |
 | Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2000). Proper Orthogonal Decomposition and Model Reduction of Nonlinear Systems. In European Cost F3 Conference on system Identification & Structural Health Monitoring, Madrid, 2000. |
Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2000). Proper Orthogonal Decomposition and its Application in of Nonlinear Structures dynamics. In Proceedings. |
 | De Boe, P., & Golinval, J.-C. (2000). Identification of Electromechanical Coupling in Piezo-Structures [Paper presentation]. Seventh International Conference on Recent Advances in Structural Dynamics, Southampton, United Kingdom. |
 | De Boe, P., & Golinval, J.-C. (2000). Actuator / Sensor Placement and Experimental Modal Analysis on Piezo-Structures [Paper presentation]. 5ème Congrès National de Mécanique Théorique et Appliquée, Louvain-la-Neuve, Belgium. |
 | Thonon, C., & Golinval, J.-C. (2000). Modal identification in presence of noise using an optimization approach [Paper presentation]. International Conference on Noise and Vibration Engineering (ISMA25), Leuven, Belgium. |
 | Lenaerts, V., Kerschen, G., Trandafilova, I., Golinval, J.-C., Van Brussel, H., & Heylen, W. (2000). Detection, localisation and identification of nonlinearities in structural dynamics. In International Conference on noise and vibration Engineering, Leuven, 2000. |
 | De Boe, P., Simon, D., & Golinval, J.-C. (2000). Strategies for Distributed Piezoelectric Actuator / Sensor Placement by Noise Effect Minimisation and Modal Controllability / Observability [Paper presentation]. ISMA25 - International Conference on Noise and Vibration Engineering, Leuven, Belgium. |
Adam, O., Marin, F., Essers, J.-A., Golinval, J.-C., Léonard, O., & Thonon, C. (1999). Aerodynamic and Mechanical Design of Compressor Blades Including Static Analysis. In Proceedings od the 3rd World Congress of Structural and Multidisciplinary Optimization. |
 | Pascual, R., Trendafilova, I., Golinval, J.-C., & Heylen, W. (1999). Damage Detection Using Model Updating and Identification Techniques [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), United Kingdom. |
 | Pascual, R., Golinval, J.-C., & RAZETO, M. (1999). On-line Damage Assessment Using Operating Deflection Shapes [Paper presentation]. 17th International Modal Analysis Conference (Proceedings of IMAC XVII), Kissimmee, Florida, United States. |
 | Simon, D., & Golinval, J.-C. (1999). Finite Element Model Updating Based On Holographic and Speckle Interferometry Measurements: Rapport VIA-25 [Paper presentation]. Photonics and Mechanics (PHOTOMEC/ETE'99), Liège, Belgium. |
 | Golinval, J.-C., & Géradin, M. (1999). Punch Press Vibration Isolation: a Case History. Revue-M. Mécanique, 44 (3), 141-145. Peer reviewed |
 | Lenaerts, V., Golinval, J.-C., Ruzzene, M., & Giorcelli, E. (1999). Experimental Validation of Two Nonlinear Identification Techniques on a Single Degree of Freedom System [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), Swansea, United Kingdom. |
 | Pascual, R., Golinval, J.-C., & Razeto, M. (1998). On the Reliability of Error Localization Indicators [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium. |
 | De Boe, P., Pascual, R., & Golinval, J.-C. (1998). Identification of the Mechanical and Piezoelectric Parameters of a Massively Piezoelectric Structure [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium. |
 | Pascual, R., Golinval, J.-C., & Razeto, M. (1998). Model Updating Using Operating Deflection Shapes [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California. |
 | Pascual, R., Golinval, J.-C., Berthillier, M., & Despres, T. (1998). Updating Industrial Models Under a General Optimization Environnment [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California. |
 | Adam, O., Marin, F., Thonon, C., Essers, J.-A., Golinval, J.-C., & Léonard, O. (1998). Developpement d'une méthodologie d'optimisation aérodynamique et mécanique d'aubes de compresseurs. RFM: Revue Française de Mécanique, 4, 247-253. Peer reviewed |
Adam, O., Thonon, C., Essers, J.-A., Golinval, J.-C., & Léonard, O. (1997). Développement d’une méthodologie d’optimisation aérodynamique et mécanique d’aubes de compresseurs. In Proceedings of the 4th Belgian National Congress on Theoretical and Applied Mechanics. |
 | Pascual, R., Golinval, J.-C., & Razeto, M. (1997). A Frequency Domain Correlation Technique for Model Correlation and Updating [Paper presentation]. 15th International Modal Analysis Conference (IMAC XV), Orlando, United States - Florida. |
 | Simon, D., & Golinval, J.-C. (1996). Dynamic Stress and Fatigue Life Prediction Using Modal Testing and Model Correlation [Paper presentation]. International Modal Analysis Conference (IMAC XIV), Dearborn, United States - Michigan. |
 | Slangen, P., Lion, Y., Golinval, J.-C., & Géradin, M. (1995). Modal Analysis of Plate Structures Using Digital Speckle Pattern Interferometry [Paper presentation]. International Modal Analysis Conference (IMAC XIII), Nashville, United States - Tennessee. |
 | Chen, S. L., Golinval, J.-C., & Géradin, M. (1994). A Dynamic Stiffness-Transfer Matrix Method for Forced Response Analysis of One-Dimensional Structures. Journal of Modal Analysis, (Avril). Peer reviewed |
 | Razeto, M., Golinval, J.-C., & Géradin, M. (1994). Modal Identification and Determination of Effective Mass Using Environmental Vibration Testing on an Electro-dynamic Shaker. In Proceedings of the International Modal Analysis Conference (IMAC XII). Society of Experimental Mechanics, Inc. |
 | Benallal, A., Chabrand, P., Ghazouane, P., Chaudonneret, M., Culié, J.-P., Contesti, E., Gamha, H., Golinval, J.-C., & Turbat, A. (1990). Validation of Structural Computation Codes in Elastoviscoplasticity. International Journal for Numerical Methods in Engineering, 29, 1109-1130. doi:10.1002/nme.1620290514 Peer Reviewed verified by ORBi |
 | Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Three dimensional turbine blade analysis in thermo-viscoplasticity. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57. Peer reviewed |
 | Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Analyse tridimensionnelle d'une aube de turbine en thermo-viscoplasticité. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57. Peer reviewed |
