[en] X-ray microtomography coupled to image analysis has been used to study the influence of the adsorbent pore texture and the experimental conditions on the dynamic adsorption of methyl iodide in packed filters. By applying this imaging technique the internal axial adsorption profiles for increasing exposure times to the gas stream are analysed. This experimental technique establishes a new technology to study in situ the dynamic adsorption of volatile compounds. Resorcinol-formaldehyde based carbon xerogels have been used as adsorbents, as their pore texture can be tuned by changing the synthesis conditions. The textural characteristics of the adsorbents (surface areas and pore volumes) have been assessed by using nitrogen and carbon dioxide adsorption as well as mercury porosimetry. The methyl iodide dynamic adsorption results show that, for the same gas flow rate and CH3I inlet concentration, the adsorbed amount is highly dependent on large pore volumes. Thus, samples with almost the same micropore volumes (adsorption volumes) have different methyl iodide adsorption capacities, which are related to, the above mentioned, large pores. The influence of both the gas carrier flow rate and the methyl iodide inlet concentration on the adsorption can be explained using the so-called linear driving force model. This approach takes into account the fact that internal transport limitations are directly related to the pore texture. Moreover, the simulation of the dynamic adsorption process has allowed relating the simulated axial concentration profiles to the experimental X-ray microtomography data.
Disciplines :
Chemical engineering
Author, co-author :
Almazán-Almazán, M. C.
López-Domingo, F. J.; Universidad de Granada (España) = University of Granada (Spain) - UGR > Departamento de CCIA > ETS de Ingeniería Informática y Telecomunicación
Domingo-García, M.; Universidad de Granada (España) = University of Granada (Spain) - UGR > Departamento de Química Inorgánica
Léonard, Angélique ; Université de Liège - ULiège > Département de chimie appliquée > Génie chimique - Procédés et développement durable
Pérez-Mendoza, M.; Université de Liège - ULiège > Département de chimie appliquée > Génie chimique - Génie catalytique
Pirard, Jean-Paul ; Université de Liège - ULiège > Département de chimie appliquée > Génie chimique - Génie catalytique
López-Garzón, F. J.; Universidad de Granada (España) = University of Granada (Spain) - UGR > Departamento de Química Inorgánica
Blacher, Silvia ; Université de Liège - ULiège > Département des sciences cliniques > Labo de biologie des tumeurs et du développement
Language :
English
Title :
Influence of carbon xerogel textural properties on the dynamic adsorption of methyl iodide
Marsh H., Rodríguez-Reinoso F. Activated Carbon 1997, Universidad de Alicante, Spain.
Rodríguez-Reinoso F. In Introduction to Carbon Technologies 1997, Universidad de Alicante, Spain. H. Marsh, E.A. Heintz, F. Rodríguez-Reinoso (Eds.).
Fernández-Morales I., Almazán-Almazán M.C., Pérez-Mendoza M., Domingo-García M., López-Garzón F.J. PET as precursor of microporous carbons: preparation and characterization. Microporous Mesoporous Mater. 2005, 80:107-115.
Almazán-Almazán M.C., Paredes J.I., Pérez-Mendoza M., Domingo-García M., Fernández-Morales I., Martínez-Alonso A., López-Garzón F.J. Surface characteristics of activated carbons obtained by pyrolysis of plasma pre-treated PET. J. Phys. Chem. B 2006, 110:11327-11333.
Almazán-Almazán M.C., Pérez-Mendoza M., Domingo-García M., Fernández-Morales I., López F.J., López-Garzón F.J. The Influence of the process conditions on the characteristics of activated carbons obtained from PET de-polymerisation. Fuel Process. Technol. 2010, 91:236-242.
Pekala R.W., Kong F.M. A synthetic route to organic aerogels-mechanism, structure, and properties. J. Phys. Colloques 1989, 50. C4-33-44.
Yamamoto T., Nishimura T., Suzuki T., Tamon H. Control of mesoporosity of carbon gels prepared by sol-gel polycondensation and freeze-drying. J. Non Cryst. Solids 2001, 288:46-55.
Al-Muhtaseb S.A., Ritter J.A. Preparation and properties of resorcinol-formaldehyde organic and carbon gels. Adv. Mater. 2003, 15:101-114.
Job N., Pirard R., Marien J., Pirard J.P. Porous carbon xerogels with texture tailored by pH control during sol-gel process. Carbon 2004, 42:619-628.
Job N., Panariello F., Marien J., Crine M., Pirard J.P., Léonard A. Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol-formaldehyde gels. J. Non Cryst. Solids 2006, 352:24-34.
Zubizarreta L., Arenillas A., Domnguez A., Menéndez J.A., Pis J.J. Development of microporous carbon xerogels by controlling synthesis conditions. J. Non Cryst. Solids 2008, 354:817-825.
Moreno-Castilla C., Maldonado-Hódar F.J. Carbon aerogels for catalysis applications an overview. Carbon 2005, 43:455-465.
Job N., Heinrichs B., Lambert S., Pirard J.P., Colomer J.F., Vertruyen B., Marien J. Carbon xerogels as catalyst supports: study of mass transfer. AICHE J. 2006, 52:2663-2676.
Girgis B.S., Attia A.A., Fathy N.A. Potential of nano-carbon xerogels in the remediation of dye-contaminated water discharges. Desalination 2011, 265:169-176.
Molchanov V.V., Shchuchkin M.N., Zaikovskii V.I., Bogdanov S.V., Zaitseva N.A. Sorbents and supports based on nanoporous carbon xerogels. Kinet. Catal. 2008, 49:702-707.
Zheivot V.I., Molchanov V.V., Zaikovskii V.I., Krivoruchko V.N., Zaitseva N.A., Shchuchkin M.N. Carbon xerogels: nano- and adsorption textures, chemical nature of the surface and gas chromatography properties. Microporous Mesoporous Mater. 2010, 130:7-13.
Conder J.R., Young C.L. Physicochemical Measurements by Gas Chromatography 1979, John Wiley and Sons, Chichester.
Lodewyckx P., Blacher S., Léonard A. Use of X-ray microtomography to visualise dynamic adsorption of organic vapour and water vapour on activated carbon. Adsorption 2006, 12:19-26.
Suzuki M., et al. Study of the wall effect on particle packing structure using X-ray micro computed tomography. Adv. Powder Technol. 2008, 19(2):183-195.
Negrini A.L., Fuelber A., Freire J.T., Thomeo J.C. Bras. J. Chem. Eng. 1999, 16:421.
M.C. Almazán-Almazán, A. Leonard, N. Job, F.J. López-Garzón, J.P. Pirard, S. Blacher, Three-dimensional void space structure of activated carbon packed beds, http://hdl.handle.net/2268/83976.
Léonard A., Wullens H., Blacher S., Marchot P., Toye D., Crine M., Lodewyckx P. In situ observation of wall effects in activated carbon filters by X-ray microtomography. Sep. Pur. Technol. 2008, 64:127-130.
Wood G.O. Effects of air temperatures and humidities on efficiencies and lifetimes of air-purifying chemical respirator cartridges tested against methyl iodide. Am. Ind. Hyg. Assoc. J. 1985, 46:251-256.
Davies G.M., Seaton N.A., Vassiliadis V.S. Calculation of pore size distributions of activated carbons from adsorption isotherms. Langmuir 1999, 15:8235-8245.
Perez-Mendoza M., Gonzalez J., Wright P.A., Seaton N.A. Elucidation of the pore structure of SBA-2 using Monte Carlo simulation to interpret experimental data for the adsorption of light hydrocarbons. Langmuir 2004, 20:7653-7658.
Pérez-Mendoza M., Shumacher C., Suarez-García F., Almazán-Almazán M.C., Domingo-García M., López-Garzón F.J., Seaton N. Analysis of the microporous texture of a glassy carbon by adsorption measurements and Monte Carlo simulation. Evolution with chemical and physical activation. Carbon 2006, 44:638-645.
Job N., Pirard R., Pirard J.P., Alie C. Non intrusive mercury porosimetry: pyrolysis of resorcinol-formaldehyde xerogels. Part. Part. Syst. Charact. 2006, 23:72-81.
Léonard A., Blacher S., Crine M., Jomaa W. Evolution of mechanical properties and final textural properties of resorcinol-formaldehyde xerogels during ambient air drying. J. Non Cryst. Solids 2008, 354:831-838.
Lodewyckx P., Vansant E.F. Influence of humidity on adsorption capacity from the Wheeler-Jonas model for prediction of breakthrough times of water immiscible organic vapors on activated carbon beds. Am. Ind. Hyg. Assoc. J. 1999, 60:612-617.
Jinorose M., Devahastin S., Blacher S., Léonard A. Application of image analysis in food drying. Advances in Food Dehydration 2009, 63-95. CRC Press. C. Ratti (Ed.).
Sing K.S.W., Everett D.H., Haul R.A.W., Moscou L., Pierotti R.A., Rouquerol J., Siemieniewska T. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure Appl. Chem. 1985, 57:603-619.
Rouquerol J., Avnir D., Fairbridge C.W., Everett D.H., Haynes J.H., Pernicone N., Ramsay J.D.F., Sing K.S.W., Unger K.K. Recommendations for the characterization of porous solids. Pure Appl. Chern. 1994, 66:1739-1758.
Rouquerol F., Rouquerol J., Sing K. Adsorption by Powders and Porous Solids. Principles, Methodology and Applications 1999, Academic Press, San Diego.
Gregg S.J., Sing K.S.W. Adsorption, Surface Area and Porosity 1982, Academic Press, London.
Pekala R.W., Alviso C.T. Carbon aerogels and xerogels. Mater. Res. Soc. Symp. Proc. 1992, 270:3-14.
Pekala R.W., Alviso C.T., Lemay J.D. Organic aerogels: a new type of ultrastructured polymer. Chemical Processing of Advanced Materials 1992, 671-683. Wiley, New York. L.L. Hench, J.K. West (Eds.).
Schweitzer P.A. Handbook of Separation Techniques for Chemical Engineers 1999, McGraw-Hill Companies.
Yang R.T. Gas Separation by Adsorption Processes 1997, Imperial College Press.
Ruthven D.M. Principles of Adsorption and Adsorption Processes 1984, Wiley, New York.
Jang S.C., Yang S.I., Ho S.G., Choi D.K. Adsorption dynamics and effects of carbon to zeolite ratio of layered beds for multicomponent gas adsorption. Korean Journal of Chemical Engineering 2011, 28:583-590.
Zhang X., Zhao X., Hu J., Wei C., Bi H.T. Adsorption dynamics of trichlorofluoromethane in activated carbon fiber beds. J. Hazard. Mater. 2011, 186:1816-1822.
Domingo-García M., Fernández-Morales I., López-Garzón F.J., Moreno-Castilla C. Determination of micropore texture of some glassy carbons using molecular probes. Langmuir 1997, 13:1218-1224.