Reference : Influence of cooling rate on residual stress profile in veneering ceramic: Measuremen...
Scientific journals : Article
Human health sciences : Dentistry & oral medicine
Influence of cooling rate on residual stress profile in veneering ceramic: Measurement by hole-drilling.
MAINJOT, Amélie mailto [> > > >]
Schajer, G. S. [Université de Liège - ULiège > Département de science dentaire > Prothèse dentaire fixe - Anatomie bucco-dentaire]
Vanheusden, Alain mailto [> > > >]
Sadoun, M. J. [> >]
Dental materials : official publication of the Academy of Dental Materials
Yes (verified by ORBi)
[en] Residual stress ; Hole-drilling ; Zirconia ; Veneering ceramic ; Cooling rate
[en] OBJECTIVES: The manufacture of dental crowns and bridges generates residual stresses within the veneering ceramic and framework during the cooling process. Residual stress is an important factor that control the mechanical behavior of restorations. Knowing the stress distribution within the veneering ceramic as a function of depth can help the understanding of failures, particularly chipping, a well-known problem with Yttria-tetragonal-zirconia-polycrystal based fixed partial dentures. The objective of this study is to investigate the cooling rate dependence of the stress profile in veneering ceramic layered on metal and zirconia frameworks. METHODS: The hole-drilling method, often used for engineering measurements, was adapted for use with veneering ceramic. The stress profile was measured in bilayered disc samples 20mm in diameter, with a 0.7mm thick metal or Yttria-tetragonal-zirconia-polycrystal framework and a 1.5mm thick veneering ceramic. Three different cooling procedures were investigated. RESULTS: The magnitude of the stresses in the surface of the veneering ceramic was found to increase with cooling rate, while the interior stresses decreased. At the surface, compressive stresses were observed in all samples. In the interior, compressive stresses were observed in metal samples and tensile in zirconia samples. SIGNIFICANCE: Cooling rate influences the magnitude of residual stresses. These can significantly influence the mechanical behavior of metal-and zirconia-based bilayered systems. The framework material influenced the nature of the interior stresses, with zirconia samples showing a less favorable stress profile than metal.
Copyright (c) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

File(s) associated to this reference

Fulltext file(s):

Restricted access
OCRDM2orbi.pdfAuthor postprint1.33 MBRequest copy

Bookmark and Share SFX Query

All documents in ORBi are protected by a user license.