Full Text

• Van der Sanden, M.C.M., Ultimate Toughness of Amorphous Polymers, Ph.D. thesis, Eindhoven University of Technology, The Netherlands, 1994.
• Bucknall, C., Toughened Plastics, Applied Sciences, London, 1977.
• Utracki, L., Polymer Alloys and Blends, Thermodynamics and Rheology, Hanser Publishers, Munich, Germany, 1989.
• Paul, D. and Newman, S., Eds., Polymer Blends, Academic Press, New York, 1978.
• Kinloch, A. and Young, R., Fracture Behavior of Polymers, Elsevier Applied Sciences, London, 1985.
• Gebizlioglu, O.S., Beckham, H.W., Argon, A.S., Cohen, R.E., and Brown, H.R., A new mechanism of toughening glassy polymers. 1. Experimental procedures, Macromolecules, 23, 3968-3974, 1990.
• Argon, A.S., Cohen, R.E., Gebizlioglu, O.S., Beckham, H.W., Brown, H.R., and Kramer, E.J., A new mechanism of toughening glassy polymers. 2. Theoretical approach, Macromolecules, 23, 3975-3982, 1990.
• Coumans, W.J., Heikens, D., and Sjoerdsma, S.D., Dilatometric investigation of deformation mechanisms in polystyrene-polyethylene block copolymer blends: correlation between Poisson ratio and adhesion, Polymer, 21, 103-108, 1980.
• Newman, S. and Strella, S., Stress-strain behavior of rubber-reinforced glassy polymers, J. Appl. Sci., 9, 2297-2310, 1965.
• Wu, S., Phase structure and adhesion in polymer blends: a criterion for rubber toughening, Polymer, 26, 1855-1863, 1985.
• Wu, S., A generalized criterion for rubber toughening: the critical matrix ligament thickness, J. Appl. Polym. Sci., 35, 549-561, 1988.
• Borggreve, R.J.M., Gaymans, R.J., and Schuijer, J., Impact behaviour of nylon-rubber blends. 5. Influence of the mechanical properties of the elastomer, Polymer, 30, 71-77, 1989.
• Borggreve, R.J.M., Gaymans, R.J., and Eichenwald, H.M., Impact behaviour of nylon-rubber blends. 6. Influence of structure on voiding processes; toughening mechanism, Polymer, 30, 78-83, 1989.
• Van Melick, H.G.H., Deformation and Failure of Polymer Glasses, Ph.D. thesis, Eindhoven University of Technology, The Netherlands, 2001.
• Meijer, H.E.H., Govaert, L.E., and Smit, R., A multi-level finite elements method for modeling rubber-toughened amorphous polymers, in Toughening of Plastics, ACS, Boston, 50, 1999, pp.
• Van der Sanden, M.C.M., Meijer, H.E.H., and Lemstra, P.J., Deformation and toughness of polymeric systems. 1. The concept of a critical thickness, Polymer, 34, 2148-2154, 1993.
• Jansen, B.J.P., Rastogi, S., Meijer, H.E.H., and Lemstra, P.J., Rubber-modified glassy amorphous polymers prepared via chemically induced phase separation. 1. Morphology development and mechanical properties, Macromolecules, 34, 3998-4006, 2001.
• Thomas, E., Kinning, D., Alward, D., and Henkee, C., Ordered packing arrangements of spherical micelles of diblock copolymers in two and three dimensions, Macromolecules, 20, 2934-2939, 1987.
• Herman, D., Kinning, D., Thomas, E., and Fetters, L. A compositional study of the morphology of 18-armed poly(styrene-isoprene) star block copolymers, Macromolecules, 20, 2940-2942, 1987.
• Kinning, D. and Thomas, E., Morphological studies of micelle formation in block copolymer/homopolymer blends, J. Chem. Phys., 10, 5806-5825, 1990.
• Kinning, D., Thomas, E., and Fetters, L., Morphological studies of micelle formation in block copolymer/homopolymer blends: comparison with theory, Macromolecules, 24, 3893-3900, 1991.
• Winey, K., Thomas, E., and Fetters, L., Swelling of lamellar diblock copolymer by homopolymer: influences of homopolymer concentration and molecular weight, Macromolecules, 24, 6182-6188, 1991.
• (b) Winey, K., Thomas, E., and Fetters, L., Ordered morphologies in binary blends of diblock copolymer and homopolymer and characterization of their intermaterial dividing surfaces, J. Chem. Phys., 95, 9367-9375, 1991.
• Han, C., Baek, D., Kim, J., Kimishima, K., and Hashimoto, T., Viscoelastic behavior, phase equilibria, and microdomain morphology in mixtures of a block copolymer and a homopolymer, Macromolecules, 25, 3052-3067, 1992.
• Koizumi, S., Hasegawa, H., and Hashimoto, T., Ordered structure of block polymer homopolymer mixture. 4. Vesicle formation and macrophase separation, Makromol. Chem. Macromol. Symp., 62, 75, 1992.
• (b) Hashimoto, T., Yamasaki, K., Koizumi, S., and Hasegawa, H., Ordered structure in blends of block copolymers. 1. Miscibility criterion for lamellar block copolymers, Macromolecules, 26, 2895-2904, 1993.
• Koizumi, S., Hasegawa, H., and Hashimoto, T., Ordered structure in blends of block copolymers. 3. Self-assembly in blends of sphere-or cylinder-forming copolymers, Macromolecules, 27, 4371-4381, 1994.
• Koizumi, S., Hasegawa, H., and Hashimoto, T., Spatial distribution of homopolymers in block copolymer microdomains as observed by a combined SANS and SAXS method, Macromolecules, 27, 7893-7906, 1994.
• Leibler, L., Theory of microphase separation in block copolymers, Macromolecules, 13, 1602-1617, 1980.
• Leibler, L., Emulsifying effects of block copolymers in incompatible polymer blends, Makromol. Chem., Macromol. Symp., 16, 1-17, 1988.
• Hillmyer, M., Lipic, P.M., Hajduk, D., Almdal, K., and Bates, F., Self-assembly and polymerization of epoxy resin-amphiphilic block copolymer nanocomposites, J. Am. Chem. Soc., 119, 2749-2750, 1997.
• Lipic, P.M., Bates, F., and Hillmyer, M., Nanostructured thermosets from self-assembled amphiphilic block copolymer/epoxy resin mixtures, J. Am. Chem. Soc., 120, 8963-8970, 1998.
• Grubbs, R., Broz, M., Dean, J., and Bates, F., Selectively epoxidized polyisoprenepolybutadiene block copolymers, Macromolecules, 33, 2308-2310, 2000.
• Grubbs, R., Dean, J., Broz, M., and Bates, F., Reactive block copolymers for modification of thermosetting epoxy, Macromolecules, 33, 9522-9534, 2000.
• Dean, J., Lipic, P., Grubbs, R., Cook, R., and Bates, F., Micellar structures and mechanical properties of block copolymer-modified epoxies, J. Polym. Sci. Polym. Phys., 39, 2996-3010, 2001.
• (b) Dean, J., Verghese, N., Pham, H., and Bates, F., Nanostructure toughened epoxy resins, Macromolecules, 36, 9267-9270, 2003.
• Kosonen, H., Ruokolainen, J., Nyholm, P., and Ikkala, O., Self-organized thermosets: blends of hexamethyltetramine cured novolac with poly(2-vinylpyridine)-blockpoly(isoprene), Macromolecules, 34, 3046-3049, 2001.
• Ritzenthaler, S., Court, F., David, L., Girard-Reydet, E., Leibler, L., and Pascault, J.P., ABC triblock copolymers/epoxy-diamine blends. 1. Keys to achieve nanostructured thermosets, Macromolecules, 35, 6245-6254, 2002.
• Ritzenthaler, S., Court, F., David, L., Girard-Reydet, E., Leibler, L., and Pascault, J.P., ABC triblock copolymers/epoxy-diamine blends. 2. Parameters controlling the morphologies and properties, Macromolecules, 36, 118-126, 2003.
• Rebizant, V., Abetz, V., Tournilhac, F., Court, F., and Leibler, L., Reactive tetrablock copolymers containing glycidyl methacrylate. Synthesis and morphology control in epoxy-amine networks, Macromolecules, 36, 9889-9896, 2003.
• Jansen, B.J.P., Rastogi, S., Meijer, H.E.H., and Lemstra, P.J., Rubber-modified glassy polymers prepared via chemically induced phase separation. 2. Mode of microscopic deformation studied by in-situ small angle x-ray scattering during tensile deformation, Macromolecules, 34, 4007-4018, 2001.
• Jansen, B.J.P., Rastogi, S., Meijer, H.E.H., and Lemstra, P.J., Rubber-modified glassy polymers prepared via chemically induced phase separation. 3. Influence of the strain rate on the microscopic deformation mechanism, Macromolecules, 32, 6283-6289, 1999.
• Jansen, B.J.P., Rastogi, S., Meijer, H.E.H., and Lemstra, P.J., Rubber-modified glassy polymers prepared via chemically induced phase separation. 4. Comparison of properties of semi-and full-IPNs, and copolymers of acrylate-aliphatic epoxy systems, Macromolecules, 32, 6290-6297, 1999.
• Van Casteren, I.A., Control of Microstructures To Induce Ductility in Brittle Amorphous Polymers, Ph.D. thesis, Eindhoven University of Technology, The Netherlands, 2003.
• Van Casteren, I.A., Van Trier, R.A.M., Goossens, J.G.P., Lemstra, P.J., and Meijer, H.E.H., The influence of hydrogen bonding on the preparation and mechanical properties of PS-diblock copolymer blends, J. Polym. Sci., Polym. Phys., 42, 2137-2160, 2004.
• Van Asselen, O.L.J., Van Casteren, I.A., Goossens, J.G.P., and Meijer, H.E.H., Deformation behavior of triblock copolymers based on polystyrene: an FT-IR spectroscopy study, Macromolecular Symposia, 205, 85-94, 2004.
• Macosko, C., Jeon, H., and Schulze, J., Block copolymers and compatibilization: reactively formed, in Encyclopedia of Materials: Science and Technology, Elsevier Science, London, 2001.
• Jérôme, R. and Pagnoulle, C., Key role of structural features of compatibilizing polymer additives, in Reactive Blending in Reactive Polymer Blending, Baker, W. Scott, C., and Hu, G., Eds., 2001, pp. 22-112.
• Orr, C., Cernohous, J., Guegan, P., Hirao, A., Jeon, H., and Macosko, C., Homogeneous reactive coupling of terminally functional polymers, Polymer, 42, 8171-8178, 2001.
• Charoensirisomboon, P., Saito, H., Inoue, T., Weber, M., and Koch, E. Crystallization in polyamide 6/polysulfone blends: effect of polysulfone particle size, Macromolecules, 31, 4963-4969, 1998.
• Ibuki, J., Charoensirisomboon, P., Ougizawa, T., Inoue, T., Koch, E., and Weber, M. Reactive blending of polysulfone with polyamide: a potential for solvent-free preparation of the block copolymer, Polymer, 40, 647-653, 1999.
• Charoensirisomboon, P., Chiba, T., Solomko, S., Inoue, T., and Weber, M. Reactive blending of polysulfone with polyamide: a difference in interfacial behavior between in situ formed block and graft copolymers, Polymer, 40, 6803-6810, 1999.
• Charoensirisomboon, P., Inoue, T., and Weber, M. Interfacial behavior of block copolymers in situ-formed in reactive blending of dissimilar polymers, Polymer, 41, 4483-4490, 2000.
• Charoensirisomboon, P., Inoue, T., and Weber, M., Pull-out of copolymer in situformed during reactive blending: effect of the copolymer architecture, Polymer, 41, 6907-6912, 2000.
• Yin, Z., Koulic, C., Pagnoulle, C., and Jérôme, R. Reactive blending of functional PS and PMMA: interfacial behavior of in-situ formed graft copolymers, Macromolecules, 34, 5132-5139, 2001.
• Yin, Z., Koulic, C., Pagnoulle, C., and Jérôme, R., Controlled synthesis of anthracenelabeled w-amine polystyrene to be used as a probe for interfacial reaction with mutually reactive PMMA, Macromol. Chem. Phys., 203, 2021-2028, 2002.
• Yin, Z., Koulic, C., Jeon, H.K., Pagnoulle, C., Macosko, C., and Jérôme, R., Effect of molecular weight of the reactive precursors in melt reactive blending, Macromolecules, 35, 8917-8919, 2002.
• Yin, Z., Koulic, C., Pagnoulle, C., and Jérôme, R., Probing of the reaction progress at a PMMA/PS interface by using anthracene-labeled reactive PS chains, Langmuir, 19, 453-457, 2003.
• Yin, Z., Koulic, C., Pagnoulle, C., and Jérôme, R., Dependence of the morphology development on the kinetics of reactive melt blending of immiscible polymers, Can. J. Chem. Eng., 80, 1044-1050, 2002.
• Yin, Z., Koulic, C., Pagnoulle, C., and Jérôme, R., Dependence of the interfacial reaction and morphology development on the functionality of the reactive precursors in reactive blending, Macromol. Symp., 198, 197-208, 2003.
• Yin, Z., Effect of Molecular Characteristics of the Reactive Precursors on Reactive Polymer Blending, Ph.D. thesis, University of Liège, Belgium, 2002.
• Orr, C., Adedeji, A., Hirao, A., Bates, F., and Macosko, C., Flow induced reactive self-assembly, Macromolecules, 30, 1243-1246, 1997.
• Pagnoulle, C., Reactive Compatibilization of SAN/EPR Blends, Ph.D. thesis, University of Liège, Belgium, 2000.
• Pagnoulle, C., Koning, C., Leemans, L., and Jérôme, R., Reactive compatibilization of SAN/EPR blends. 1. Dependence of the phase morphology development on the reaction kinetics, Macromolecules, 33, 6275-6283, 2000.
• Koulic, C., Reactive Blending as a Tool towards Nanostructured Polymers, Ph.D. thesis, University of Liège, Belgium, 2004.
• Koulic, C., Yin, Z., Pagnoulle, C., and Jérôme, R., Vesicular nanostructures prepared by reactive melt blending, Angew. Chem. Int. Ed., 41, 2154-2156, 2002.
• Koulic, C. and Jérôme, R., Nanostructured PMMA: from lamellar sheets to doublelayered vesicles, Macromolecules, 37, 888-893, 2004.
• Koulic, C. and Jérôme, R., Nanostructured polyamide by reactive blending. 1. Effect of the reactive diblock composition, Macromolecules, 37, 3459-3469, 2004.
• Kinning, D.J., Winey, K., and Thomas, E.L., Structural transitions from spherical to nonspherical micelles in blends of poly(styrene-butadiene) diblock copolymer and polystyrene homopolymers, Macromolecules, 21, 3502-3506, 1988.
• Harada, T., Bates, F., and Lodge, T., Transverse orientation of lamellae and cylinders by solution extrusion of a pentablock copolymer, Macromolecules, 36, 5440-5442, 2003.
• Schlienger, M., Contribution à l’étude des copolymères triséquencés poly(styréne-bisoprene-b-methacrylate de méthyle). Préparation d’alliages de polyméres, Ph.D. thesis, Mulhouse, France, 1976.
• Riess, G., Schlienger, M., and Marti, S., New morphologies in rubber-modified polymers, J. Macromol. Sci.-Phys., B17, 355, 1989.
• Hamley, I.W., The Physics of Block Copolymers, Oxford University Press, Oxford, 1998.
• Chen, H., Lin, S., Huang, Y., Chiu, F., Liou, W., and Lin, J., Crystallization in the vesicle walls templated by dry-brush block copolymer/homopolymer blend, Macromolecules, 35, 9434-9440, 2002.