Request a copy

Full Text

• Gasteiger H.A., Kocha S.S., Sompalli B., and Wagner F.T. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs. Appl Catal B 56 (2005) 9-35
• Marie J., Berthon-Fabry S., Achard P., Chatenet M., Pradourat A., and Chainet E. Highly dispersed platinum on carbon aerogels as supported catalysts for PEM fuel cell-electrodes: comparison of two different synthesis paths. J Non-Cryst Solids 350 (2004) 88-96
• Marie J., Berthon-Fabry S., Chatenet M., Chainet E., Pirard R., Cornet N., et al. Platinum supported on resorcinol-formaldehyde based carbon aerogels for PEMFC electrodes: Influence of the carbon support on electrocatalytic properties. J Appl Electrochem 37 (2007) 147-153
• Marie J. Design, study and characterization of new PEM fuel cells electrode materials based on carbon aerogels. Processing them in electrode membrane assembly. Ph D thesis (Energetics), École des Mines de Paris, 2007. Confidential until 1/1/2009.
• Pekala R.W. Organic aerogels from the polycondensation of resorcinol with formaldehyde. J Mater Sci 24 (1989) 3221-3227
• Al-Muhtaseb S.A., and Ritter J.A. Preparation and properties of resorcinol-formaldehyde organic and carbon gels. Adv Mater 15 (2003) 101-114
• Job N., Pirard R., Marien J., and Pirard J.-P. Porous carbon xerogels with texture tailored by pH control during sol-gel process. Carbon 42 (2004) 619-628
• Job N., Théry A., Pirard R., Marien J., Kocon L., Rouzaud J.-N., et al. Carbon aerogels, cryogels and xerogels: influence of the drying method on the textural properties of porous carbon materials. Carbon 43 (2005) 2481-2494
• Job N., Panariello F., Marien J., Crine M., Pirard J.-P., and Léonard A. Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol-formaldehyde gels. J Non-Cryst Solids 352 (2006) 24-34
• Job N., Heinrichs B., Lambert S., Pirard J.-P., Colomer J.-F., Vertruyen B., et al. Carbon xerogels as catalyst supports: study of mass transfer. AIChE J 52 (2006) 2663-2676
• Job N., Pereira M.F.R., Lambert S., Cabiac A., Delahay G., Colomer J.-F., et al. Highly dispersed platinum catalysts prepared by impregnation of texture-tailored carbon xerogels. J Catal 240 (2006) 160-171
• Lecloux A.J. Texture of catalysts. In: Anderson J.R., and Boudart M. (Eds). Catalysis, Science and Technology vol. 2 (1981), Springer, Berlin 171-230
• Alié C., Pirard R., Lecloux A.J., and Pirard J.-P. Preparation of low-density xerogels through additives to TEOS-based alcogels. J Non-Cryst Solids 246 (1999) 216-228
• Bergeret G., and Gallezot P. Particle size and dispersion measurement. In: Ertl G., Knözinger H., and Weitkamp J. (Eds). Handbook of heterogeneous catalysis (1997), Wiley-VCH, Weinheim 439-464
• Rodri{dotless}́guez-Reinoso F., Rodri{dotless}́guez-ramos I., Moreno-Castilla C., Guerrero-Ruiz A., and López-Gonzáles J.D. Platinum catalysts supported on activated carbons. I. Preparation and characterization. J Catal 99 (1986) 171-183
• Rodri{dotless}́guez-Reinoso F. The role of carbon materials in heterogeneous catalysis. Carbon 36 (1998) 159-175
• Regalbuto J.R. A scientific method to prepare supported metal catalysts. In: Richards R. (Ed). Surface and nanomolecular catalysis (2006), CRC Press, New York 161-194
• de Miguel S.R., Vilella J.I., Jablonski E.L., Scelza O.A., Salinas-Martinez de Lecea C., and Linares-Solano A. Preparation of Pt catalysts supported on activated carbon felts (ACF). Appl Catal A 232 (2002) 237-246
• Regalbuto J.R. Strong electrostatic adsorption of metals onto catalyst supports. In: Regalbuto J.R., and Schwarz J.A. (Eds). The science and engineering of catalyst preparation (2006), Marcel Dekker, CRC Press, New York 297-339
• Gasteiger H.A., Panels J.E., and Yan S.G. Dependence of PEM fuel cell performance on catalyst loading. J Power Sources 127 (2004) 162-171
• Gasteiger H.A., Gu W., Makharia R., Mathias M.F., and Sompalli B. Beginning-of-life MEA performance: efficiency loss contributions. In: Vielstich W., Lamm A., and Gasteiger H.A. (Eds). Handbook of fuel cells - fundamentals. Technology and applications vol. 3 (2003), Wiley, Chichester, UK 593-610
• Kinoshita K. Electrochemical oxygen technology (1992), Wiley, New York
• Kinoshita K. Carbon - electrochemical and physicochemical properties (1988), Wiley, New York
• Makharia R., Mathias M.F., and Baker D.R. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy. J Electrochem Soc 152 (2005) A970-A977
• Williams M.V., Kunz H.R., and Fenton J.M. Analysis of polarization curves to evaluate polarization sources in hydrogen/air PEM fuel cells. J Electrochem Soc 152 3 (2005) A635-A644
• Mukerjee S. Particle size and structural effects in platinum electrocatalysis. J Appl Electrochem 20 (1990) 537-548
• Takasu Y., Ohashi N., Zhang X.-G., Murakami Y., Minagawa H., Sato S., and Yahikozawa K. Size effects of platinum particles on the electroreduction of oxygen. Electrochim Acta 41 (1996) 2595-2600
• Marie J., Berthon-Fabry S., Achard P., Chatenet M., Chainet E., Cornet N., et al. Synthesis of highly porous catalytic layers for polymer electrolyte fuel cell based on carbon aerogels. ECS Trans 1 (2006) 509-519
• Satterfield C.N. Mass transfer in heterogeneous catalysis (1970), MIT Press, Cambridge