Reference : Propulsion vehicle integration for reusable launcher using in-flight oxygen collection
Scientific journals : Article
Engineering, computing & technology : Aerospace & aeronautics engineering
Propulsion vehicle integration for reusable launcher using in-flight oxygen collection
Bizzarri, D. [Université Libre de Bruxelles - ULB > Dept Fluid Mechanics > > >]
Hendrick, Patrick [Université Libre de Bruxelles - ULB > Département de mécanique des fluides > > >]
Heyen, Georges [Université de Liège - ULiège > Département de chimie appliquée > LASSC (Labo d'analyse et synthèse des systèmes chimiques) >]
Ngendakumana, Philippe mailto [Université de Liège - ULiège > Département d'aérospatiale et mécanique > Thermotechnique >]
Aerospace Science and Technology
Elsevier Science
Yes (verified by ORBi)
[en] Airbreathing propulsion ; Compact air separator ; Orbital launch ; Oxygen collection
[en] The use of in-flight oxygen collection has shown to significantly improve space launcher performance. The conceptual approach followed by Belgian teams working on oxygen collection has been to try to widening the available design margins in order to reduce the required technological leap and limit the economical risk associated with such a development. The aim of the ESA-funded theoretical and experimental study on an air separation device is to demonstrate the possibility of performing efficient air distillation in a compact rotating column. An integration of the vehicle, propulsion system and separation unit designs is presented. The objective is to optimise the overall vehicle performance while keeping technological difficulty and system complexity at a reasonable level. Reference vehicles are presented within their specific mission profiles with an emphasis on TSTO's. Different layouts of the internal energy and mass flowsheets have been studied and were compared in order to make best use of the refrigeration capacity of the hydrogen fuel running through the propulsion system during the first phase of the flight. In those flowsheets, the separator is considered as a classical distillation tray column. That analysis provides the requirements in terms of heat exchange capacity, compression ratios and number of so-called transfer units needed in the separator. The system is intentionally kept simple to limit complexity, but the analysis is thorough and accurate, including, for example, the effect of the presence of argon. Results for a supersonic carrier are presented. A compact separation unit has been designed in order to reach those requirements. That includes internals, practical building with estimates of pressure drops, separation performance and flow limitation. Main results are given, sizing of the separator bed is provided for a carrier plane showing that such on-board separator is indeed practical. (C) 2007 Elsevier Masson SAS. All rights reserved.
Researchers ; Professionals ; Students

File(s) associated to this reference

Fulltext file(s):

Open access
AST2006i_.pdfNo commentaryAuthor preprint443.13 kBView/Open

Bookmark and Share SFX Query

All documents in ORBi are protected by a user license.